mirror of
https://github.com/torvalds/linux.git
synced 2026-05-05 23:05:25 -04:00
6eaac34ff30e189fda28110298ca9fbfb2f51e28
35715 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
6eaac34ff3 |
Merge tag 'linux-watchdog-4.19-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck: - add MEN 16z069 IP-Core driver - renesas-wdt: add support for the R8A77990 wdt - stm32_iwdg: Add stm32mp1 support and pclk feature - sp805_wdt, orion_wdt, sprd_wdt: several improvements - imx2_wdt, stmp3xxx: switch to SPDX identifier * tag 'linux-watchdog-4.19-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: fix dependencies of menz69_wdt.o watchdog: sp805: Add clock-frequency property watchdog: add driver for the MEN 16z069 IP-Core watchdog: sprd_wdt: Remove redundant dev_err call in sprd_wdt_probe() watchdog: stmp3xxx: Switch to SPDX identifier watchdog: imx2_wdt: Switch to SPDX identifier watchdog: sp805: set WDOG_HW_RUNNING when appropriate watchdog: sp805: add 'timeout-sec' DT property support dt-bindings: watchdog: Add optional 'timeout-sec' property for sp805 dt-bindings: watchdog: Consolidate SP805 binding docs watchdog: orion_wdt: Mark watchdog as active when running at probe watchdog: stm32: add pclk feature for stm32mp1 dt-bindings: watchdog: add stm32mp1 support dt-bindings: watchdog: renesas-wdt: Add support for the R8A77990 wdt |
||
|
Linus Torvalds
|
13bf2cf9e2 |
Merge tag 'dmaengine-4.19-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull DMAengine updates from Vinod Koul:
"This round brings couple of framework changes, a new driver and usual
driver updates:
- new managed helper for dmaengine framework registration
- split dmaengine pause capability to pause and resume and allow
drivers to report that individually
- update dma_request_chan_by_mask() to handle deferred probing
- move imx-sdma to use virt-dma
- new driver for Actions Semi Owl family S900 controller
- minor updates to intel, renesas, mv_xor, pl330 etc"
* tag 'dmaengine-4.19-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits)
dmaengine: Add Actions Semi Owl family S900 DMA driver
dt-bindings: dmaengine: Add binding for Actions Semi Owl SoCs
dmaengine: sh: rcar-dmac: Should not stop the DMAC by rcar_dmac_sync_tcr()
dmaengine: mic_x100_dma: use the new helper to simplify the code
dmaengine: add a new helper dmaenginem_async_device_register
dmaengine: imx-sdma: add memcpy interface
dmaengine: imx-sdma: add SDMA_BD_MAX_CNT to replace '0xffff'
dmaengine: dma_request_chan_by_mask() to handle deferred probing
dmaengine: pl330: fix irq race with terminate_all
dmaengine: Revert "dmaengine: mv_xor_v2: enable COMPILE_TEST"
dmaengine: mv_xor_v2: use {lower,upper}_32_bits to configure HW descriptor address
dmaengine: mv_xor_v2: enable COMPILE_TEST
dmaengine: mv_xor_v2: move unmap to before callback
dmaengine: mv_xor_v2: convert callback to helper function
dmaengine: mv_xor_v2: kill the tasklets upon exit
dmaengine: mv_xor_v2: explicitly freeup irq
dmaengine: sh: rcar-dmac: Add dma_pause operation
dmaengine: sh: rcar-dmac: add a new function to clear CHCR.DE with barrier
dmaengine: idma64: Support dmaengine_terminate_sync()
dmaengine: hsu: Support dmaengine_terminate_sync()
...
|
||
|
Linus Torvalds
|
bbd60bffaf |
Merge tag 'mmc-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson: "Updates for MMC for v4.19. MMC core: - Add some fine-grained hooks to further support HS400 tuning - Improve error path for bus width setting for HS400es - Use a common method when checking R1 status MMC host: - renesas_sdhi: Add r8a77990 support - renesas_sdhi: Add eMMC HS400 mode support - tmio/renesas_sdhi: Improve tuning/clock management - tmio: Add eMMC HS400 mode support - sunxi: Add support for 3.3V eMMC DDR mode - mmci: Initial support to manage variant specific callbacks - sdhci: Don't try 3.3V I/O voltage if not supported - sdhci-pci-dwc-mshc: Add driver to support Synopsys dwc mshc SDHCI PCI - sdhci-of-dwcmshc: Add driver to support Synopsys DWC MSHC SDHCI - sdhci-msm: Add support for new version sdcc V5 - sdhci-pci-o2micro: Add support for O2 eMMC HS200 mode - sdhci-pci-o2micro: Add support for O2 hardware tuning - sdhci-pci-o2micro: Add MSI interrupt support for O2 SD host - sdhci-pci: Add support for Intel ICP - sdhci-tegra: Prevent ACMD23 and HS200 mode on Tegra 3 - sdhci-tegra: Fix eMMC DDR52 mode - sdhci-tegra: Improve clock management - dw_mmc-rockchip: Document compatible string for px30 - sdhci-esdhc-imx: Add support for 3.3V eMMC DDR mode - sdhci-of-esdhc: Set proper DMA mask for ls104x chips - sdhci-of-esdhc: Improve clock management - sdhci-of-arasan: Add a quirk to manage unstable clocks - dw_mmc-exynos: Address potential external abort during system resume - pxamci: Add support for common MMC DT bindings - pxamci: Several cleanups and improvements - pxamci: Merge immutable branch for pxa to switch to DMA slave maps" * tag 'mmc-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (56 commits) mmc: core: improve reasonableness of bus width setting for HS400es mmc: tmio: remove unneeded variable in tmio_mmc_start_command() mmc: renesas_sdhi: Fix sampling clock position selecting mmc: tmio: Fix tuning flow mmc: sunxi: remove output of virtual base address dt-bindings: mmc: rockchip-dw-mshc: add description for px30 mmc: renesas_sdhi: Add r8a77990 support mmc: sunxi: allow 3.3V DDR when DDR is available mmc: mmci: Add and implement a ->dma_setup() callback for qcom dml mmc: mmci: Initial support to manage variant specific callbacks mmc: tegra: Force correct divider calculation on DDR50/52 mmc: sdhci: Add MSI interrupt support for O2 SD host mmc: sdhci: Add support for O2 hardware tuning mmc: sdhci: Export sdhci tuning function symbol mmc: sdhci: Change O2 Host HS200 mode clock frequency to 200MHz mmc: sdhci: Add support for O2 eMMC HS200 mode mmc: tegra: Add and use tegra_sdhci_get_max_clock() mmc: sdhci-esdhc-imx: fix indent mmc: sdhci-esdhc-imx: disable clocks before changing frequency mmc: tegra: prevent ACMD23 on Tegra 3 ... |
||
|
Linus Torvalds
|
307797159a |
pcmcia: remove long deprecated pcmcia_request_exclusive_irq() function
This function was created as a deprecated fallback case back in 2010 by commit |
||
|
Linus Torvalds
|
a18d783fed |
Merge tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH: "Here are all of the driver core and related patches for 4.19-rc1. Nothing huge here, just a number of small cleanups and the ability to now stop the deferred probing after init happens. All of these have been in linux-next for a while with only a merge issue reported" * tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (21 commits) base: core: Remove WARN_ON from link dependencies check drivers/base: stop new probing during shutdown drivers: core: Remove glue dirs from sysfs earlier driver core: remove unnecessary function extern declare sysfs.h: fix non-kernel-doc comment PM / Domains: Stop deferring probe at the end of initcall iommu: Remove IOMMU_OF_DECLARE iommu: Stop deferring probe at end of initcalls pinctrl: Support stopping deferred probe after initcalls dt-bindings: pinctrl: add a 'pinctrl-use-default' property driver core: allow stopping deferred probe after init driver core: add a debugfs entry to show deferred devices sysfs: Fix internal_create_group() for named group updates base: fix order of OF initialization linux/device.h: fix kernel-doc notation warning Documentation: update firmware loader fallback reference kobject: Replace strncpy with memcpy drivers: base: cacheinfo: use OF property_read_u32 instead of get_property,read_number kernfs: Replace strncpy with memcpy device: Add #define dev_fmt similar to #define pr_fmt ... |
||
|
Linus Torvalds
|
d5acba26bf |
Merge tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the bit set of char/misc drivers for 4.19-rc1
There is a lot here, much more than normal, seems like everyone is
writing new driver subsystems these days... Anyway, major things here
are:
- new FSI driver subsystem, yet-another-powerpc low-level hardware
bus
- gnss, finally an in-kernel GPS subsystem to try to tame all of the
crazy out-of-tree drivers that have been floating around for years,
combined with some really hacky userspace implementations. This is
only for GNSS receivers, but you have to start somewhere, and this
is great to see.
Other than that, there are new slimbus drivers, new coresight drivers,
new fpga drivers, and loads of DT bindings for all of these and
existing drivers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
android: binder: Rate-limit debug and userspace triggered err msgs
fsi: sbefifo: Bump max command length
fsi: scom: Fix NULL dereference
misc: mic: SCIF Fix scif_get_new_port() error handling
misc: cxl: changed asterisk position
genwqe: card_base: Use true and false for boolean values
misc: eeprom: assignment outside the if statement
uio: potential double frees if __uio_register_device() fails
eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency
misc: ti-st: Fix memory leak in the error path of probe()
android: binder: Show extra_buffers_size in trace
firmware: vpd: Fix section enabled flag on vpd_section_destroy
platform: goldfish: Retire pdev_bus
goldfish: Use dedicated macros instead of manual bit shifting
goldfish: Add missing includes to goldfish.h
mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
dt-bindings: mux: add adi,adgs1408
Drivers: hv: vmbus: Cleanup synic memory free path
Drivers: hv: vmbus: Remove use of slow_virt_to_phys()
Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()
...
|
||
|
Linus Torvalds
|
2475c515d4 |
Merge tag 'staging-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO updates from Greg KH: "Here are the big staging/iio patches for 4.19-rc1. Lots of churn here, with tons of cleanups happening in staging drivers, a removal of an old crypto driver that no one was using (skein), and the addition of some new IIO drivers. Also added was a "gasket" driver from Google that needs loads of work and the erofs filesystem. Even with adding all of the new drivers and a new filesystem, we are only adding about 1000 lines overall to the kernel linecount, which shows just how much cleanup happened, and how big the unused crypto driver was. All of these have been in the linux-next tree for a while now with no reported issues" * tag 'staging-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (903 commits) staging:rtl8192u: Remove unused macro definitions - Style staging:rtl8192u: Add spaces around '+' operator - Style staging:rtl8192u: Remove stale comment - Style staging: rtl8188eu: remove unused mp_custom_oid.h staging: fbtft: Add spaces around / - Style staging: fbtft: Erases some repetitive usage of function name - Style staging: fbtft: Adjust some empty-line problems - Style staging: fbtft: Removes one nesting level to help readability - Style staging: fbtft: Changes gamma table to define. staging: fbtft: A bit more information on dev_err. staging: fbtft: Fixes some alignment issues - Style staging: fbtft: Puts macro arguments in parenthesis to avoid precedence issues - Style staging: rtl8188eu: remove unused array dB_Invert_Table staging: rtl8188eu: remove whitespace, add missing blank line staging: rtl8188eu: use is_multicast_ether_addr in rtw_sta_mgt.c staging: rtl8188eu: remove whitespace - style staging: rtl8188eu: cleanup block comment - style staging: rtl8188eu: use is_multicast_ether_addr in rtl8188eu_xmit.c staging: rtl8188eu: use is_multicast_ether_addr in recv_linux.c staging: rtlwifi: refactor rtl_get_tcb_desc ... |
||
|
Linus Torvalds
|
336722eb9d |
Merge tag 'tty-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH: "Here is the big tty and serial driver pull request for 4.19-rc1. It's not all that big, just a number of small serial driver updates and fixes, along with some better vt handling for unicode characters for those using braille terminals. All of these patches have been in linux-next for a long time with no reported issues" * tag 'tty-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (73 commits) tty: serial: 8250: Revert NXP SC16C2552 workaround serial: 8250_exar: Read INT0 from slave device, too tty: rocket: Fix possible buffer overwrite on register_PCI serial: 8250_dw: Add ACPI support for uart on Broadcom SoC serial: 8250_dw: always set baud rate in dw8250_set_termios dt-bindings: serial: Add binding for uartlite tty: serial: uartlite: Add support for suspend and resume tty: serial: uartlite: Add clock adaptation tty: serial: uartlite: Add structure for private data serial: sh-sci: Improve support for separate TEI and DRI interrupts serial: sh-sci: Remove SCIx_RZ_SCIFA_REGTYPE serial: sh-sci: Allow for compressed SCIF address serial: sh-sci: Improve interrupts description serial: 8250: Use cached port name directly in messages serial: 8250_exar: Drop unused variable in pci_xr17v35x_setup() vt: drop unused struct vt_struct vt: avoid a VLA in the unicode screen scroll function vt: add /dev/vcsu* to devices.txt vt: coherence validation code for the unicode screen buffer vt: selection: take screen contents from uniscr if available ... |
||
|
Linus Torvalds
|
5695d5d197 |
Merge tag 'usb-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY updates from Greg KH:
"Here is the big USB and phy driver patch set for 4.19-rc1.
Nothing huge but there was a lot of work that happened this
development cycle:
- lots of type-c work, with drivers graduating out of staging, and
displayport support being added.
- new PHY drivers
- the normal collection of gadget driver updates and fixes
- code churn to work on the urb handling path, using irqsave()
everywhere in anticipation of making this codepath a lot simpler in
the future.
- usbserial driver fixes and reworks
- other misc changes
All of these have been in linux-next with no reported issues for a
while"
* tag 'usb-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits)
USB: serial: pl2303: add a new device id for ATEN
usb: renesas_usbhs: Kconfig: convert to SPDX identifiers
usb: dwc3: gadget: Check MaxPacketSize from descriptor
usb: dwc2: Turn on uframe_sched on "stm32f4x9_fsotg" platforms
usb: dwc2: Turn on uframe_sched on "amlogic" platforms
usb: dwc2: Turn on uframe_sched on "his" platforms
usb: dwc2: Turn on uframe_sched on "bcm" platforms
usb: dwc2: gadget: ISOC's starting flow improvement
usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic.
usb: dwc3: core: Enable AutoRetry feature in the controller
usb: dwc3: Set default mode for dwc_usb31
usb: gadget: udc: renesas_usb3: Add register of usb role switch
usb: dwc2: replace ioread32/iowrite32_rep with dwc2_readl/writel_rep
usb: dwc2: Modify dwc2_readl/writel functions prototype
usb: dwc3: pci: Intel Merrifield can be host
usb: dwc3: pci: Supply device properties via driver data
arm64: dts: dwc3: description of incr burst type
usb: dwc3: Enable undefined length INCR burst type
usb: dwc3: add global soc bus configuration reg0
usb: dwc3: Describe 'wakeup_work' field of struct dwc3_pci
...
|
||
|
Linus Torvalds
|
6ada4e2826 |
Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton: - a few misc things - a few Y2038 fixes - ntfs fixes - arch/sh tweaks - ocfs2 updates - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (111 commits) mm/hmm.c: remove unused variables align_start and align_end fs/userfaultfd.c: remove redundant pointer uwq mm, vmacache: hash addresses based on pmd mm/list_lru: introduce list_lru_shrink_walk_irq() mm/list_lru.c: pass struct list_lru_node* as an argument to __list_lru_walk_one() mm/list_lru.c: move locking from __list_lru_walk_one() to its caller mm/list_lru.c: use list_lru_walk_one() in list_lru_walk_node() mm, swap: make CONFIG_THP_SWAP depend on CONFIG_SWAP mm/sparse: delete old sparse_init and enable new one mm/sparse: add new sparse_init_nid() and sparse_init() mm/sparse: move buffer init/fini to the common place mm/sparse: use the new sparse buffer functions in non-vmemmap mm/sparse: abstract sparse buffer allocations mm/hugetlb.c: don't zero 1GiB bootmem pages mm, page_alloc: double zone's batchsize mm/oom_kill.c: document oom_lock mm/hugetlb: remove gigantic page support for HIGHMEM mm, oom: remove sleep from under oom_lock kernel/dma: remove unsupported gfp_mask parameter from dma_alloc_from_contiguous() mm/cma: remove unsupported gfp_mask parameter from cma_alloc() ... |
||
|
Christian Hansen
|
59ae96ffc3 |
tools/vm/page-types.c: add support for idle page tracking
Add a flag which causes page-types to use the kernels's idle page tracking to mark pages idle. As the tool already prints the idle flag if set, subsequent runs will show which pages have been accessed since last run. [akpm@linux-foundation.org: simplify mark_page_idle()] [chansen3@cisco.com: reorganize mark_page_idle() logic, add docs] Link: http://lkml.kernel.org/r/20180706172237.21691-1-chansen3@cisco.com Link: http://lkml.kernel.org/r/20180612153223.13174-1-chansen3@cisco.com Signed-off-by: Christian Hansen <chansen3@cisco.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Christian Hansen
|
7f1d23e607 |
tools/vm/page-types.c: include shared map counts
Add a new flag that will read kpagecount for each PFN and print out the number of times the page is mapped along with the flags in the listing view. This information is useful in understanding and optimizing memory usage. Identifying pages which are not shared allows us to focus on adjusting the memory layout or access patterns for the sole owning process. Knowing the number of processes that share a page tells us how many other times we must make the same adjustments or how many processes to potentially disable. Truncated sample output: voffset map-cnt offset len flags 561a3591e 1 15fe8 1 ___U_lA____Ma_b___________________________ 561a3591f 1 2b103 1 ___U_lA____Ma_b___________________________ 561a36ca4 1 2cc78 1 ___U_lA____Ma_b___________________________ 7f588bb4e 14 2273c 1 __RU_lA____M______________________________ [akpm@linux-foundation.org: coding-style fixes] [chansen3@cisco.com: add documentation, tweak whitespace] Link: http://lkml.kernel.org/r/20180705181204.5529-1-chansen3@cisco.com Link: http://lkml.kernel.org/r/20180612153205.12879-1-chansen3@cisco.com Signed-off-by: Christian Hansen <chansen3@cisco.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
NeilBrown
|
1f4aace60b |
fs/seq_file.c: simplify seq_file iteration code and interface
The documentation for seq_file suggests that it is necessary to be able to move the iterator to a given offset, however that is not the case. If the iterator is stored in the private data and is stable from one read() syscall to the next, it is only necessary to support first/next interactions. Implementing this in a client is a little clumsy. - if ->start() is given a pos of zero, it should go to start of sequence. - if ->start() is given the name pos that was given to the most recent next() or start(), it should restore the iterator to state just before that last call - if ->start is given another number, it should set the iterator one beyond the start just before the last ->start or ->next call. Also, the documentation says that the implementation can interpret the pos however it likes (other than zero meaning start), but seq_file increments the pos sometimes which does impose on the implementation. This patch simplifies the interface for first/next iteration and simplifies the code, while maintaining complete backward compatability. Now: - if ->start() is given a pos of zero, it should return an iterator placed at the start of the sequence - if ->start() is given a non-zero pos, it should return the iterator in the same state it was after the last ->start or ->next. This is particularly useful for interators which walk the multiple chains in a hash table, e.g. using rhashtable_walk*. See fs/gfs2/glock.c and drivers/staging/lustre/lustre/llite/vvp_dev.c A large part of achieving this is to *always* call ->next after ->show has successfully stored all of an entry in the buffer. Never just increment the index instead. Also: - always pass &m->index to ->start() and ->next(), never a temp variable - don't clear ->from when ->count is zero, as ->from is dead when ->count is zero. Some ->next functions do not increment *pos when they return NULL. To maintain compatability with this, we still need to increment m->index in one place, if ->next didn't increment it. Note that such ->next functions are buggy and should be fixed. A simple demonstration is dd if=/proc/swaps bs=1000 skip=1 Choose any block size larger than the size of /proc/swaps. This will always show the whole last line of /proc/swaps. This patch doesn't work around buggy next() functions for this case. [neilb@suse.com: ensure ->from is valid] Link: http://lkml.kernel.org/r/87601ryb8a.fsf@notabene.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.com> Acked-by: Jonathan Corbet <corbet@lwn.net> [docs] Tested-by: Jann Horn <jannh@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
5e2d059b52 |
Merge tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- A fix for a bug in our page table fragment allocator, where a page
table page could be freed and reallocated for something else while
still in use, leading to memory corruption etc. The fix reuses
pt_mm in struct page (x86 only) for a powerpc only refcount.
- Fixes to our pkey support. Several are user-visible changes, but
bring us in to line with x86 behaviour and/or fix outright bugs.
Thanks to Florian Weimer for reporting many of these.
- A series to improve the hvc driver & related OPAL console code,
which have been seen to cause hardlockups at times. The hvc driver
changes in particular have been in linux-next for ~month.
- Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y.
- Remove Power8 DD1 and Power9 DD1 support, neither chip should be in
use anywhere other than as a paper weight.
- An optimised memcmp implementation using Power7-or-later VMX
instructions
- Support for barrier_nospec on some NXP CPUs.
- Support for flushing the count cache on context switch on some IBM
CPUs (controlled by firmware), as a Spectre v2 mitigation.
- A series to enhance the information we print on unhandled signals
to bring it into line with other arches, including showing the
offending VMA and dumping the instructions around the fault.
Thanks to: Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey
Kardashevskiy, Alexey Spirkov, Alistair Popple, Andrew Donnellan,
Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Bartosz Golaszewski,
Benjamin Herrenschmidt, Bharat Bhushan, Bjoern Noetel, Boqun Feng,
Breno Leitao, Bryant G. Ly, Camelia Groza, Christophe Leroy, Christoph
Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt, Darren Stevens, Dave
Young, David Gibson, Diana Craciun, Finn Thain, Florian Weimer,
Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand,
Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel
Stanley, Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh
Salgaonkar, Markus Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues,
Michael Hanselmann, Michael Neuling, Michael Schmitz, Mukesh Ojha,
Murilo Opsfelder Araujo, Nicholas Piggin, Parth Y Shah, Paul
Mackerras, Paul Menzel, Ram Pai, Randy Dunlap, Rashmica Gupta, Reza
Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff, Scott Wood,
Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson, Thiago
Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat
Rao, zhong jiang"
* tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (234 commits)
powerpc/mm/book3s/radix: Add mapping statistics
powerpc/uaccess: Enable get_user(u64, *p) on 32-bit
powerpc/mm/hash: Remove unnecessary do { } while(0) loop
powerpc/64s: move machine check SLB flushing to mm/slb.c
powerpc/powernv/idle: Fix build error
powerpc/mm/tlbflush: update the mmu_gather page size while iterating address range
powerpc/mm: remove warning about ‘type’ being set
powerpc/32: Include setup.h header file to fix warnings
powerpc: Move `path` variable inside DEBUG_PROM
powerpc/powermac: Make some functions static
powerpc/powermac: Remove variable x that's never read
cxl: remove a dead branch
powerpc/powermac: Add missing include of header pmac.h
powerpc/kexec: Use common error handling code in setup_new_fdt()
powerpc/xmon: Add address lookup for percpu symbols
powerpc/mm: remove huge_pte_offset_and_shift() prototype
powerpc/lib: Use patch_site to patch copy_32 functions once cache is enabled
powerpc/pseries: Fix endianness while restoring of r3 in MCE handler.
powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements
powerpc/fadump: handle crash memory ranges array index overflow
...
|
||
|
Linus Torvalds
|
b0e5c29426 |
Merge tag 'for-4.19/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer: - A couple stable fixes for the DM writecache target. - A stable fix for the DM cache target that fixes the potential for data corruption after an unclean shutdown of a cache device using writeback mode. - Update DM integrity target to allow the metadata to be stored on a separate device from data. - Fix DM kcopyd and the snapshot target to cond_resched() where appropriate and be more efficient with processing completed work. - A few fixes and improvements for DM crypt. - Add DM delay target feature to configure delay of flushes independent of writes. - Update DM thin-provisioning target to include metadata_low_watermark threshold in pool status. - Fix stale DM thin-provisioning Documentation. * tag 'for-4.19/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (26 commits) dm writecache: fix a crash due to reading past end of dirty_bitmap dm crypt: don't decrease device limits dm cache metadata: set dirty on all cache blocks after a crash dm snapshot: remove stale FIXME in snapshot_map() dm snapshot: improve performance by switching out_of_order_list to rbtree dm kcopyd: avoid softlockup in run_complete_job dm cache metadata: save in-core policy_hint_size to on-disk superblock dm thin: stop no_space_timeout worker when switching to write-mode dm kcopyd: return void from dm_kcopyd_copy() dm thin: include metadata_low_watermark threshold in pool status dm writecache: report start_sector in status line dm crypt: convert essiv from ahash to shash dm crypt: use wake_up_process() instead of a wait queue dm integrity: recalculate checksums on creation dm integrity: flush journal on suspend when using separate metadata device dm integrity: use version 2 for separate metadata dm integrity: allow separate metadata device dm integrity: add ic->start in get_data_sector() dm integrity: report provided data sectors in the status dm integrity: implement fair range locks ... |
||
|
Vinod Koul
|
4d44248239 | Merge branch 'topic/xilinx' into for-linus | ||
|
Vinod Koul
|
89b7e78fb2 | Merge branch 'topic/renesas' into for-linus | ||
|
Vinod Koul
|
35e0db66a8 | Merge branch 'topic/owl' into for-linus | ||
|
Linus Torvalds
|
d01e12dd3f |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
Pull thermal management updates from Eduardo Valentin: - rework tsens driver to add support for tsens-v2 (Amit Kucheria) - rework armada thermal driver to use syscon and multichannel support (Miquel Raynal) - fixes to TI SoC, IMX, Exynos, RCar, and hwmon drivers * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (34 commits) thermal: armada: fix copy-paste error in armada_thermal_probe() thermal: rcar_thermal: avoid NULL dereference in absence of IRQ resources thermal: samsung: Remove Exynos5440 clock handling left-overs thermal: tsens: Fix negative temperature reporting thermal: tsens: switch from of_iomap() to devm_ioremap_resource() thermal: tsens: Rename variable thermal: tsens: Add generic support for TSENS v2 IP thermal: tsens: Rename tsens-8996 to tsens-v2 for reuse thermal: tsens: Add support to split up register address space into two dt: thermal: tsens: Document the fallback DT property for v2 of TSENS IP thermal: tsens: Get rid of unused fields in structure thermal_hwmon: Pass the originating device down to hwmon_device_register_with_info thermal_hwmon: Sanitize attribute name passed to hwmon dt-bindings: thermal: armada: add reference to new bindings dt-bindings: cp110: add the thermal node in the syscon file dt-bindings: cp110: update documentation since DT de-duplication dt-bindings: ap806: add the thermal node in the syscon file dt-bindings: cp110: prepare the syscon file to list other syscons nodes dt-bindings: ap806: prepare the syscon file to list other syscons nodes dt-bindings: cp110: rename cp110 syscon file ... |
||
|
Linus Torvalds
|
9502f0d1d9 |
Merge tag 'mailbox-v4.19' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar: - xgene: potential null pointer fix - omap: switch to spdx license and use of_device_get_match_data() to match data - ti-msgmgr: cleanup and optimisation. New TI specific feature - secure proxy thread. - mediatek: add driver for CMDQ controller. - nxp: add driver for MU controller * tag 'mailbox-v4.19' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: Add support for i.MX messaging unit dt-bindings: mailbox: imx-mu: add generic MU channel support dt-bindings: arm: fsl: add mu binding doc mailbox: add MODULE_LICENSE() for mtk-cmdq-mailbox.c mailbox: mediatek: Add Mediatek CMDQ driver dt-bindings: soc: Add documentation for the MediaTek GCE unit mailbox: ti-msgmgr: Add support for Secure Proxy dt-bindings: mailbox: Add support for secure proxy threads mailbox: ti-msgmgr: Move the memory region name to descriptor mailbox: ti-msgmgr: Change message count mask to be descriptor based mailbox: ti-msgmgr: Allocate Rx channel resources only on request mailbox: ti-msgmgr: Get rid of unused structure members mailbox/omap: use of_device_get_match_data() to get match data mailbox/omap: switch to SPDX license identifier mailbox: xgene-slimpro: Fix potential NULL pointer dereference |
||
|
Linus Torvalds
|
4e31843f68 |
Merge tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas: - Decode AER errors with names similar to "lspci" (Tyler Baicar) - Expose AER statistics in sysfs (Rajat Jain) - Clear AER status bits selectively based on the type of recovery (Oza Pawandeep) - Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru Gagniuc) - Don't clear AER status bits if we're using the "Firmware-First" strategy where firmware owns the registers (Alexandru Gagniuc) - Use sysfs_match_string() to simplify ASPM sysfs parsing (Andy Shevchenko) - Remove unnecessary includes of <linux/pci-aspm.h> (Bjorn Helgaas) - Defer DPC event handling to work queue (Keith Busch) - Use threaded IRQ for DPC bottom half (Keith Busch) - Print AER status while handling DPC events (Keith Busch) - Work around IDT switch ACS Source Validation erratum (James Puthukattukaran) - Emit diagnostics for all cases of PCIe Link downtraining (Links operating slower than they're capable of) (Alexandru Gagniuc) - Skip VFs when configuring Max Payload Size (Myron Stowe) - Reduce Root Port Max Payload Size if necessary when hot-adding a device below it (Myron Stowe) - Simplify SHPC existence/permission checks (Bjorn Helgaas) - Remove hotplug sample skeleton driver (Lukas Wunner) - Convert pciehp to threaded IRQ handling (Lukas Wunner) - Improve pciehp tolerance of missed events and initially unstable links (Lukas Wunner) - Clear spurious pciehp events on resume (Lukas Wunner) - Add pciehp runtime PM support, including for Thunderbolt controllers (Lukas Wunner) - Support interrupts from pciehp bridges in D3hot (Lukas Wunner) - Mark fall-through switch cases before enabling -Wimplicit-fallthrough (Gustavo A. R. Silva) - Move DMA-debug PCI init from arch code to PCI core (Christoph Hellwig) - Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is supplied (Heiner Kallweit) - Unify PCI and DMA direction #defines (Shunyong Yang) - Add PCI_DEVICE_DATA() macro (Andy Shevchenko) - Check for VPD completion before checking for timeout (Bert Kenward) - Limit Netronome NFP5000 config space size to work around erratum (Jakub Kicinski) - Set IRQCHIP_ONESHOT_SAFE for PCI MSI irqchips (Heiner Kallweit) - Document ACPI description of PCI host bridges (Bjorn Helgaas) - Add "pci=disable_acs_redir=" parameter to disable ACS redirection for peer-to-peer DMA support (we don't have the peer-to-peer support yet; this is just one piece) (Logan Gunthorpe) - Clean up devm_of_pci_get_host_bridge_resources() resource allocation (Jan Kiszka) - Fixup resizable BARs after suspend/resume (Christian König) - Make "pci=earlydump" generic (Sinan Kaya) - Fix ROM BAR access routines to stay in bounds and check for signature correctly (Rex Zhu) - Add DMA alias quirk for Microsemi Switchtec NTB (Doug Meyer) - Expand documentation for pci_add_dma_alias() (Logan Gunthorpe) - To avoid bus errors, enable PASID only if entire path supports End-End TLP prefixes (Sinan Kaya) - Unify slot and bus reset functions and remove hotplug knowledge from callers (Sinan Kaya) - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to fix guest reboot issues (Alex Williamson) - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD Controller (Bjorn Helgaas) - Remove Xilinx AXI-PCIe host bridge arch dependency (Palmer Dabbelt) - Remove Aardvark outbound window configuration (Evan Wang) - Fix Aardvark bridge window sizing issue (Zachary Zhang) - Convert Aardvark to use pci_host_probe() to reduce code duplication (Thomas Petazzoni) - Correct the Cadence cdns_pcie_writel() signature (Alan Douglas) - Add Cadence support for optional generic PHYs (Alan Douglas) - Add Cadence power management ops (Alan Douglas) - Remove redundant variable from Cadence driver (Colin Ian King) - Add Kirin MSI support (Xiaowei Song) - Drop unnecessary root_bus_nr setting from exynos, imx6, keystone, armada8k, artpec6, designware-plat, histb, qcom, spear13xx (Shawn Guo) - Move link notification settings from DesignWare core to individual drivers (Gustavo Pimentel) - Add endpoint library MSI-X interfaces (Gustavo Pimentel) - Correct signature of endpoint library IRQ interfaces (Gustavo Pimentel) - Add DesignWare endpoint library MSI-X callbacks (Gustavo Pimentel) - Add endpoint library MSI-X test support (Gustavo Pimentel) - Remove unnecessary GFP_ATOMIC from Hyper-V "new child" allocation (Jia-Ju Bai) - Add more devices to Broadcom PAXC quirk (Ray Jui) - Work around corrupted Broadcom PAXC config space to enable SMMU and GICv3 ITS (Ray Jui) - Disable MSI parsing to work around broken Broadcom PAXC logic in some devices (Ray Jui) - Hide unconfigured functions to work around a Broadcom PAXC defect (Ray Jui) - Lower iproc log level to reduce console output during boot (Ray Jui) - Fix mobiveil iomem/phys_addr_t type usage (Lorenzo Pieralisi) - Fix mobiveil missing include file (Lorenzo Pieralisi) - Add mobiveil Kconfig/Makefile support (Lorenzo Pieralisi) - Fix mvebu I/O space remapping issues (Thomas Petazzoni) - Use generic pci_host_bridge in mvebu instead of ARM-specific API (Thomas Petazzoni) - Whitelist VMD devices with fast interrupt handlers to avoid sharing vectors with slow handlers (Keith Busch) * tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (153 commits) PCI/AER: Don't clear AER bits if error handling is Firmware-First PCI: Limit config space size for Netronome NFP5000 PCI/MSI: Set IRQCHIP_ONESHOT_SAFE for PCI-MSI irqchips PCI/VPD: Check for VPD access completion before checking for timeout PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry PCI: Match Root Port's MPS to endpoint's MPSS as necessary PCI: Skip MPS logic for Virtual Functions (VFs) PCI: Add function 1 DMA alias quirk for Marvell 88SS9183 PCI: Check for PCIe Link downtraining PCI: Add ACS Redirect disable quirk for Intel Sunrise Point PCI: Add device-specific ACS Redirect disable infrastructure PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZE PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support PCI: Allow specifying devices using a base bus and path of devfns PCI: Make specifying PCI devices in kernel parameters reusable PCI: Hide ACS quirk declarations inside PCI core PCI: Delay after FLR of Intel DC P3700 NVMe PCI: Disable Samsung SM961/PM961 NVMe before FLR PCI: Export pcie_has_flr() PCI: mvebu: Drop bogus comment above mvebu_pcie_map_registers() ... |
||
|
Linus Torvalds
|
72f02ba66b |
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx, hisi_sas, smartpqi, megaraid_sas, arcmsr. In addition, with the continuing absence of Nic we have target updates for tcmu and target core (all with reviews and acks). The biggest observable change is going to be that we're (again) trying to switch to mulitqueue as the default (a user can still override the setting on the kernel command line). Other major core stuff is the removal of the remaining Microchannel drivers, an update of the internal timers and some reworks of completion and result handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits) scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue scsi: ufs: remove unnecessary query(DM) UPIU trace scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done() scsi: aacraid: Spelling fix in comment scsi: mpt3sas: Fix calltrace observed while running IO & reset scsi: aic94xx: fix an error code in aic94xx_init() scsi: st: remove redundant pointer STbuffer scsi: qla2xxx: Update driver version to 10.00.00.08-k scsi: qla2xxx: Migrate NVME N2N handling into state machine scsi: qla2xxx: Save frame payload size from ICB scsi: qla2xxx: Fix stalled relogin scsi: qla2xxx: Fix race between switch cmd completion and timeout scsi: qla2xxx: Fix Management Server NPort handle reservation logic scsi: qla2xxx: Flush mailbox commands on chip reset scsi: qla2xxx: Fix unintended Logout scsi: qla2xxx: Fix session state stuck in Get Port DB scsi: qla2xxx: Fix redundant fc_rport registration scsi: qla2xxx: Silent erroneous message scsi: qla2xxx: Prevent sysfs access when chip is down scsi: qla2xxx: Add longer window for chip reset ... |
||
|
Linus Torvalds
|
db06f826ec |
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The new and exciting feature this time around is in the clk core.
We've added duty cycle support to the clk API so that clk signal duty
cycle ratios can be adjusted while taking into account things like clk
dividers and clk tree hierarchy. So far only one SoC has implemented
support for this, but I expect there will be more to come in the
future.
Outside of the core, we have the usual pile of clk driver updates and
additions. The Amlogic meson driver got the most lines in the diffstat
this time around because it added support for a whole bunch of
hardware and duty cycle configuration. After that the Rockchip PX30,
Qualcomm SDM845, and Renesas SoC drivers fill in a majority of the
diff. We're left with the collection of non-critical fixes after that.
Overall it looks pretty quiet this time.
Core:
- Clk duty cycle support
- Proper CLK_SET_RATE_GATE support throughout the tree
New Drivers:
- Actions Semi Owl series S700 SoC clk driver
- Qualcomm SDM845 display clock controller
- i.MX6SX ocram_s clk support
- Uniphier NAND, USB3 PHY, and SPI clk support
- Qualcomm RPMh clk driver
- i.MX7D mailbox clk support
- Maxim 9485 Programmable Clock Generator
- expose 32 kHz PLL on PXA SoCs
- imx6sll GPIO clk gate support
- Atmel at91 I2S audio clk support
- SI544/SI514 clk on/off support
- i.MX6UL GPIO clock gates in CCM CCGR
- Renesas Crypto Engine clocks on R-Car H3
- Renesas clk support for the new RZ/N1D SoC
- Allwinner A64 display engine clock support
- support for Rockchip's PX30 SoC
- Amlogic Meson axg PCIe and audio clocks
- Amlogic Meson GEN CLK on gxbb, gxl and axg
Updates:
- remove an unused variable from Exynos4412 ISP driver
- fix a thinko bug in SCMI clk division logic
- add missing of_node_put()s in some i.MX clk drivers
- Tegra SDMMC clk jitter improvements with high speed signaling modes
- SPDX tagging for qcom and cs2000-cp drivers
- stop leaking con ids in __clk_put()
- fix a corner case in fixed factor clk probing where node is in DT
but parent clk is registered much later
- Marvell Armada 3700 clk_pm_cpu_get_parent() had an invalid return
value
- i.MX clk init arrays removed in place of CLK_IS_CRITICAL
- convert to CLK_IS_CRITICAL for i.MX51/53 driver
- fix Tegra BPMP driver oops when xlating a NULL clk
- proper default configuration for vic03 and vde clks on Tegra124
- mark Tegra memory controller clks as critical
- fix array bounds clamp in Tegra's emc determine_rate() op
- Ingenic i2s bit update and allow UDC clk to gate
- fix name of aspeed SDC clk define to have only one 'CLK'
- fix i.MX6QDL video clk parent
- critical clk markings for qcom SDM845
- fix Stratix10 mpu_free_clk and sdmmc_free_clk parents
- mark Rockchip's pclk_rkpwm_pmu as critical clock, due to it
supplying the pwm used to drive the logic supply of the rk3399
core"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (85 commits)
clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399
clk: cs2000-cp: convert to SPDX identifiers
clk: scmi: Fix the rounding of clock rate
clk: qcom: Add display clock controller driver for SDM845
clk: mvebu: armada-37xx-periph: Remove unused var num_parents
clk: samsung: Remove unused mout_user_aclk400_mcuisp_p4x12 variable
clk: actions: Add S700 SoC clock support
dt-bindings: clock: Add S700 support for Actions Semi Soc's
clk: actions: Add missing REGMAP_MMIO dependency
clk: uniphier: add clock frequency support for SPI
clk: uniphier: add more USB3 PHY clocks
clk: uniphier: add NAND 200MHz clock
clk: tegra: make sdmmc2 and sdmmc4 as sdmmc clocks
clk: tegra: Add sdmmc mux divider clock
clk: tegra: Refactor fractional divider calculation
clk: tegra: Fix includes required by fence_udelay()
clk: imx6sll: fix missing of_node_put()
clk: imx6ul: fix missing of_node_put()
clk: imx: add ocram_s clock for i.mx6sx
clk: mvebu: armada-37xx-periph: Fix wrong return value in get_parent
...
|
||
|
Linus Torvalds
|
6de4c691ea |
Merge tag 'gpio-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v4.19 kernel cycle.
I don't know if anything in particular stands out. Maybe the Aspeed
coprocessor thing from Benji: Aspeed is doing baseboard management
chips (BMC's) for servers etc.
These Aspeed's are ARM processors that exist inside (I guess) Intel
servers, and they are moving forward to using mainline Linux in those.
This is one of the pieces of the puzzle to achive that. They are doing
OpenBMC, it's pretty cool: https://lwn.net/Articles/683320/
Summary:
Core changes:
- Add a new API for explicitly naming GPIO consumers, when needed.
- Don't let userspace set values on input lines. While we do not
think anyone would do this crazy thing we better plug the hole
before someone uses it and think it's a nifty feature.
- Avoid calling chip->request() for unused GPIOs.
New drivers/subdrivers:
- The Mediatek MT7621 is supported which is a big win for OpenWRT and
similar router distributions using this chip, as it seems every
major router manufacturer on the planet has made products using
this chip: https://wikidevi.com/wiki/MediaTek_MT7621
- The Tegra 194 is now supported.
- The IT87 driver now supports IT8786E and IT8718F super-IO chips.
- Add support for Rockchip RK3328 in the syscon GPIO driver.
Driver changes:
- Handle the get/set_multiple() properly on MMIO chips with inverted
direction registers. We didn't have this problem until a new chip
appear that has get/set registers AND inverted direction bits, OK
now we handle it.
- A patch series making more error codes percolate upward properly
for different errors on gpiochip_lock_as_irq().
- Get/set multiple for the OMAP driver, accelerating these multiple
line operations if possible.
- A coprocessor interface for the Aspeed driver. Sometimes a few GPIO
lines need to be grabbed by a co-processor for doing automated
tasks, sometimes they are available as GPIO lines. By adding an
explicit API in this driver we make it possible for the two line
consumers to coexist. (This work was made available on the
ib-aspeed branch, which may be appearing in other pull requests.)
- Implemented .get_direction() and open drain in the SCH311x driver.
- Continuing cleanup of included headers in GPIO drivers"
* tag 'gpio-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (80 commits)
gpio: it87: Add support for IT8613
gpio: it87: add support for IT8718F Super I/O.
gpiolib: Avoid calling chip->request() for unused gpios
gpio: tegra: Include the right header
gpio: mmio: Fix up inverted direction registers
gpio: xilinx: Use the right include
gpio: timberdale: Include the right header
gpio: tb10x: Use the right include
gpiolib: Fix of_node inconsistency
gpio: vr41xx: Bail out on gpiochip_lock_as_irq() error
gpio: uniphier: Bail out on gpiochip_lock_as_irq() error
gpio: xgene-sb: Don't shadow error code of gpiochip_lock_as_irq()
gpio: em: Don't shadow error code of gpiochip_lock_as_irq()
gpio: dwapb: Don't shadow error code of gpiochip_lock_as_irq()
gpio: bcm-kona: Don't shadow error code of gpiochip_lock_as_irq()
gpiolib: Don't shadow error code of gpiochip_lock_as_irq()
gpio: syscon: rockchip: add GRF GPIO support for rk3328
gpio: omap: Add get/set_multiple() callbacks
gpio: pxa: remove set but not used variable 'gpio_offset'
gpio-it87: add support for IT8786E Super I/O
...
|
||
|
Linus Torvalds
|
99a2c789dd |
Merge tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random
Pull random updates from Ted Ts'o: "Some changes to trust cpu-based hwrng (such as RDRAND) for initializing hashed pointers and (optionally, controlled by a config option) to initialize the CRNG to avoid boot hangs" * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: Make crng state queryable random: remove preempt disabled region random: add a config option to trust the CPU's hwrng vsprintf: Add command line option debug_boot_weak_hash vsprintf: Use hw RNG for ptr_key random: Return nbytes filled from hw RNG random: Fix whitespace pre random-bytes work |
||
|
Linus Torvalds
|
71f3a82fab |
Merge tag 'media/v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab: - new Socionext MN88443x ISDB-S/T demodulator driver: mn88443x - new sensor drivers: ak7375, ov2680 and rj54n1cb0c - an old soc-camera sensor driver converted to the V4L2 framework: mt9v111 - a new Voice-Coil Motor (VCM) driver: dw9807-vcm - some cleanups at cx25821, removing legacy unused code - some improvements at ddbridge driver - new platform driver: vicodec - some DVB API cleanups, removing ioctls and compat code for old out-of-tree drivers that were never merged upstream - improvements at DVB core to support frontents that support both Satellite and non-satellite delivery systems - got rid of the unused VIDIOC_RESERVED V4L2 ioctl - some cleanups/improvements at gl861 ISDB driver - several improvements on ov772x, ov7670 and ov5640, imx274, ov5645, and smiapp sensor drivers - fixes at em28xx to support dual TS devices - some cleanups at V4L2/VB2 locking logic - some API improvements at media controller - some cec core and drivers improvements - some uvcvideo improvements - some improvements at platform drivers: stm32-dcmi, rcar-vin, coda, reneseas-ceu, imx, vsp1, venus, camss - lots of other cleanups and fixes * tag 'media/v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (406 commits) Revert "media: vivid: shut up warnings due to a non-trivial logic" siano: get rid of an unused return code for debugfs register media: isp: fix a warning about a wrong struct initializer media: radio-wl1273: fix return code for the polling routine media: s3c-camif: fix return code for the polling routine media: saa7164: fix return codes for the polling routine media: exynos-gsc: fix return code if mutex was interrupted media: mt9v111: Fix build error with no VIDEO_V4L2_SUBDEV_API media: xc4000: get rid of uneeded casts media: drxj: get rid of uneeded casts media: tuner-xc2028: don't use casts for printing sizes media: cleanup fall-through comments media: vivid: shut up warnings due to a non-trivial logic media: rtl28xxu: be sure that it won't go past the array size media: mt9v111: avoid going past the buffer media: vsp1_dl: add a description for cmdpool field media: sta2x11: add a missing parameter description media: v4l2-mem2mem: add descriptions to MC fields media: i2c: fix warning in Aptina MT9V111 media: imx: shut up a false positive warning ... |
||
|
Linus Torvalds
|
54dbe75bbf |
Merge tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This is the main drm pull request for 4.19.
Rob has some new hardware support for new qualcomm hw that I'll send
along separately. This has the display part of it, the remaining pull
is for the acceleration engine.
This also contains a wound-wait/wait-die mutex rework, Peter has acked
it for merging via my tree.
Otherwise mostly the usual level of activity. Summary:
core:
- Wound-wait/wait-die mutex rework
- Add writeback connector type
- Add "content type" property for HDMI
- Move GEM bo to drm_framebuffer
- Initial gpu scheduler documentation
- GPU scheduler fixes for dying processes
- Console deferred fbcon takeover support
- Displayport support for CEC tunneling over AUX
panel:
- otm8009a panel driver fixes
- Innolux TV123WAM and G070Y2-L01 panel driver
- Ilitek ILI9881c panel driver
- Rocktech RK070ER9427 LCD
- EDT ETM0700G0EDH6 and EDT ETM0700G0BDH6
- DLC DLC0700YZG-1
- BOE HV070WSA-100
- newhaven, nhd-4.3-480272ef-atxl LCD
- DataImage SCF0700C48GGU18
- Sharp LQ035Q7DB03
- p079zca: Refactor to support multiple panels
tinydrm:
- ILI9341 display panel
New driver:
- vkms - virtual kms driver to testing.
i915:
- Icelake:
Display enablement
DSI support
IRQ support
Powerwell support
- GPU reset fixes and improvements
- Full ppgtt support refactoring
- PSR fixes and improvements
- Execlist improvments
- GuC related fixes
amdgpu:
- Initial amdgpu documentation
- JPEG engine support on VCN
- CIK uses powerplay by default
- Move to using core PCIE functionality for gens/lanes
- DC/Powerplay interface rework
- Stutter mode support for RV
- Vega12 Powerplay updates
- GFXOFF fixes
- GPUVM fault debugging
- Vega12 GFXOFF
- DC improvements
- DC i2c/aux changes
- UVD 7.2 fixes
- Powerplay fixes for Polaris12, CZ/ST
- command submission bo_list fixes
amdkfd:
- Raven support
- Power management fixes
udl:
- Cleanups and fixes
nouveau:
- misc fixes and cleanups.
msm:
- DPU1 support display controller in sdm845
- GPU coredump support.
vmwgfx:
- Atomic modesetting validation fixes
- Support for multisample surfaces
armada:
- Atomic modesetting support completed.
exynos:
- IPPv2 fixes
- Move g2d to component framework
- Suspend/resume support cleanups
- Driver cleanups
imx:
- CSI configuration improvements
- Driver cleanups
- Use atomic suspend/resume helpers
- ipu-v3 V4L2 XRGB32/XBGR32 support
pl111:
- Add Nomadik LCDC variant
v3d:
- GPU scheduler jobs management
sun4i:
- R40 display engine support
- TCON TOP driver
mediatek:
- MT2712 SoC support
rockchip:
- vop fixes
omapdrm:
- Workaround for DRA7 errata i932
- Fix mm_list locking
mali-dp:
- Writeback implementation
PM improvements
- Internal error reporting debugfs
tilcdc:
- Single fix for deferred probing
hdlcd:
- Teardown fixes
tda998x:
- Converted to a bridge driver.
etnaviv:
- Misc fixes"
* tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm: (1506 commits)
drm/amdgpu/sriov: give 8s for recover vram under RUNTIME
drm/scheduler: fix param documentation
drm/i2c: tda998x: correct PLL divider calculation
drm/i2c: tda998x: get rid of private fill_modes function
drm/i2c: tda998x: move mode_valid() to bridge
drm/i2c: tda998x: register bridge outside of component helper
drm/i2c: tda998x: cleanup from previous changes
drm/i2c: tda998x: allocate tda998x_priv inside tda998x_create()
drm/i2c: tda998x: convert to bridge driver
drm/scheduler: fix timeout worker setup for out of order job completions
drm/amd/display: display connected to dp-1 does not light up
drm/amd/display: update clk for various HDMI color depths
drm/amd/display: program display clock on cache match
drm/amd/display: Add NULL check for enabling dp ss
drm/amd/display: add vbios table check for enabling dp ss
drm/amd/display: Don't share clk source between DP and HDMI
drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on Carrizo
drm/amd/display: Use calculated disp_clk_khz value for dce110
drm/amd/display: Implement custom degamma lut on dcn
drm/amd/display: Destroy aux_engines only once
...
|
||
|
Linus Torvalds
|
dafa5f6577 |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "API: - Fix dcache flushing crash in skcipher. - Add hash finup self-tests. - Reschedule during speed tests. Algorithms: - Remove insecure vmac and replace it with vmac64. - Add public key verification for DH/ECDH. Drivers: - Decrease priority of sha-mb on x86. - Improve NEON latency/throughput on ARM64. - Add md5/sha384/sha512/des/3des to inside-secure. - Support eip197d in inside-secure. - Only register algorithms supported by the host in virtio. - Add cts and remove incompatible cts1 from ccree. - Add hisilicon SEC security accelerator driver. - Replace msm hwrng driver with qcom pseudo rng driver. Misc: - Centralize CRC polynomials" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (121 commits) crypto: arm64/ghash-ce - implement 4-way aggregation crypto: arm64/ghash-ce - replace NEON yield check with block limit crypto: hisilicon - sec_send_request() can be static lib/mpi: remove redundant variable esign crypto: arm64/aes-ce-gcm - don't reload key schedule if avoidable crypto: arm64/aes-ce-gcm - implement 2-way aggregation crypto: arm64/aes-ce-gcm - operate on two input blocks at a time crypto: dh - make crypto_dh_encode_key() make robust crypto: dh - fix calculating encoded key size crypto: ccp - Check for NULL PSP pointer at module unload crypto: arm/chacha20 - always use vrev for 16-bit rotates crypto: ccree - allow bigger than sector XTS op crypto: ccree - zero all of request ctx before use crypto: ccree - remove cipher ivgen left overs crypto: ccree - drop useless type flag during reg crypto: ablkcipher - fix crash flushing dcache in error path crypto: blkcipher - fix crash flushing dcache in error path crypto: skcipher - fix crash flushing dcache in error path crypto: skcipher - remove unnecessary setting of walk->nbytes crypto: scatterwalk - remove scatterwalk_samebuf() ... |
||
|
Linus Torvalds
|
9a76aba02a |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
"Highlights:
- Gustavo A. R. Silva keeps working on the implicit switch fallthru
changes.
- Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
Luca Coelho.
- Re-enable ASPM in r8169, from Kai-Heng Feng.
- Add virtual XFRM interfaces, which avoids all of the limitations of
existing IPSEC tunnels. From Steffen Klassert.
- Convert GRO over to use a hash table, so that when we have many
flows active we don't traverse a long list during accumluation.
- Many new self tests for routing, TC, tunnels, etc. Too many
contributors to mention them all, but I'm really happy to keep
seeing this stuff.
- Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.
- Lots of cleanups and fixes in L2TP code from Guillaume Nault.
- Add IPSEC offload support to netdevsim, from Shannon Nelson.
- Add support for slotting with non-uniform distribution to netem
packet scheduler, from Yousuk Seung.
- Add UDP GSO support to mlx5e, from Boris Pismenny.
- Support offloading of Team LAG in NFP, from John Hurley.
- Allow to configure TX queue selection based upon RX queue, from
Amritha Nambiar.
- Support ethtool ring size configuration in aquantia, from Anton
Mikaev.
- Support DSCP and flowlabel per-transport in SCTP, from Xin Long.
- Support list based batching and stack traversal of SKBs, this is
very exciting work. From Edward Cree.
- Busyloop optimizations in vhost_net, from Toshiaki Makita.
- Introduce the ETF qdisc, which allows time based transmissions. IGB
can offload this in hardware. From Vinicius Costa Gomes.
- Add parameter support to devlink, from Moshe Shemesh.
- Several multiplication and division optimizations for BPF JIT in
nfp driver, from Jiong Wang.
- Lots of prepatory work to make more of the packet scheduler layer
lockless, when possible, from Vlad Buslov.
- Add ACK filter and NAT awareness to sch_cake packet scheduler, from
Toke Høiland-Jørgensen.
- Support regions and region snapshots in devlink, from Alex Vesker.
- Allow to attach XDP programs to both HW and SW at the same time on
a given device, with initial support in nfp. From Jakub Kicinski.
- Add TLS RX offload and support in mlx5, from Ilya Lesokhin.
- Use PHYLIB in r8169 driver, from Heiner Kallweit.
- All sorts of changes to support Spectrum 2 in mlxsw driver, from
Ido Schimmel.
- PTP support in mv88e6xxx DSA driver, from Andrew Lunn.
- Make TCP_USER_TIMEOUT socket option more accurate, from Jon
Maxwell.
- Support for templates in packet scheduler classifier, from Jiri
Pirko.
- IPV6 support in RDS, from Ka-Cheong Poon.
- Native tproxy support in nf_tables, from Máté Eckl.
- Maintain IP fragment queue in an rbtree, but optimize properly for
in-order frags. From Peter Oskolkov.
- Improvde handling of ACKs on hole repairs, from Yuchung Cheng"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
hv/netvsc: Fix NULL dereference at single queue mode fallback
net: filter: mark expected switch fall-through
xen-netfront: fix warn message as irq device name has '/'
cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
net: dsa: mv88e6xxx: missing unlock on error path
rds: fix building with IPV6=m
inet/connection_sock: prefer _THIS_IP_ to current_text_addr
net: dsa: mv88e6xxx: bitwise vs logical bug
net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
ieee802154: hwsim: using right kind of iteration
net: hns3: Add vlan filter setting by ethtool command -K
net: hns3: Set tx ring' tc info when netdev is up
net: hns3: Remove tx ring BD len register in hns3_enet
net: hns3: Fix desc num set to default when setting channel
net: hns3: Fix for phy link issue when using marvell phy driver
net: hns3: Fix for information of phydev lost problem when down/up
net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
net: hns3: Add support for serdes loopback selftest
bnxt_en: take coredump_record structure off stack
...
|
||
|
Bjorn Helgaas
|
0c38011aba |
Merge branch 'remotes/lorenzo/pci/dwc'
- Add Kirin MSI support (Xiaowei Song)
- Drop unnecessary root_bus_nr setting from exynos, imx6, keystone,
armada8k, artpec6, designware-plat, histb, qcom, spear13xx (Shawn Guo)
- Move link notification settings from DesignWare core to individual
drivers (Gustavo Pimentel)
- Add endpoint library MSI-X interfaces (Gustavo Pimentel)
- Correct signature of endpoint library IRQ interfaces (Gustavo Pimentel)
- Add DesignWare endpoint library MSI-X callbacks (Gustavo Pimentel)
- Add endpoint library MSI-X test support (Gustavo Pimentel)
* remotes/lorenzo/pci/dwc:
PCI: endpoint: Add MSI set maximum restriction
tools: PCI: Add MSI-X support
pci_endpoint_test: Add 2 ioctl commands
pci-epf-test/pci_endpoint_test: Add MSI-X support
pci-epf-test/pci_endpoint_test: Use irq_type module parameter
pci-epf-test/pci_endpoint_test: Cleanup PCI_ENDPOINT_TEST memspace
PCI: dwc: Add legacy interrupt callback handler
PCI: dwc: Rework MSI callbacks handler
PCI: dwc: Add MSI-X callbacks handler
PCI: Update xxx_pcie_ep_raise_irq() and pci_epc_raise_irq() signatures
PCI: endpoint: Add MSI-X interfaces
PCI: dwc: Fix EP link notification implementation
PCI: spear13xx: Drop unnecessary root_bus_nr setting
PCI: qcom: Drop unnecessary root_bus_nr setting
PCI: histb: Drop unnecessary root_bus_nr setting
PCI: designware-plat: Drop unnecessary root_bus_nr setting
PCI: artpec6: Drop unnecessary root_bus_nr setting
PCI: armada8k: Drop unnecessary root_bus_nr setting
PCI: keystone: Drop unnecessary root_bus_nr setting
PCI: imx6: Drop unnecessary root_bus_nr setting
PCI: exynos: Drop unnecessary root_bus_nr setting
PCI: kirin: Add MSI support
|
||
|
Bjorn Helgaas
|
37f0e311bc |
Merge branch 'remotes/lorenzo/pci/cadence'
- Correct the Cadence cdns_pcie_writel() signature (Alan Douglas) - Add Cadence support for optional generic PHYs (Alan Douglas) - Add Cadence power management ops (Alan Douglas) - Remove redundant variable from Cadence driver (Colin Ian King) * remotes/lorenzo/pci/cadence: PCI: pcie-cadence-ep: Remove redundant variable mmc PCI: cadence: Add shutdown callback to host driver PCI: cadence: Add Power Management ops for host and EP dt-bindings: PCI: cadence: Add DT bindings for optional PHYs PCI: cadence: Add generic PHY support to host and EP drivers PCI: cadence: Update cdns_pcie_writel() function signature |
||
|
Bjorn Helgaas
|
5fc054a544 |
Merge branch 'pci/resource'
- Clean up devm_of_pci_get_host_bridge_resources() resource allocation
(Jan Kiszka)
- Fixup resizable BARs after suspend/resume (Christian König)
- Make "pci=earlydump" generic (Sinan Kaya)
- Fix ROM BAR access routines to stay in bounds and check for signature
correctly (Rex Zhu)
* pci/resource:
PCI: Make pci_get_rom_size() static
PCI: Add check code for last image indicator not set
PCI: Avoid accessing memory outside the ROM BAR
PCI: Make early dump functionality generic
PCI: Cleanup PCI_REBAR_CTRL_BAR_SHIFT handling
PCI: Restore resized BAR state on resume
PCI: Clean up resource allocation in devm_of_pci_get_host_bridge_resources()
# Conflicts:
# Documentation/admin-guide/kernel-parameters.txt
|
||
|
Bjorn Helgaas
|
c689209be2 |
Merge branch 'pci/peer-to-peer'
- Add "pci=disable_acs_redir=" parameter to disable ACS redirection for
peer-to-peer DMA support (we don't have the peer-to-peer support yet;
this is just one piece) (Logan Gunthorpe)
* pci/peer-to-peer:
PCI: Add ACS Redirect disable quirk for Intel Sunrise Point
PCI: Add device-specific ACS Redirect disable infrastructure
PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZE
PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support
PCI: Allow specifying devices using a base bus and path of devfns
PCI: Make specifying PCI devices in kernel parameters reusable
PCI: Hide ACS quirk declarations inside PCI core
|
||
|
Bjorn Helgaas
|
eadf3d3209 |
Merge branch 'pci/notes'
- Document ACPI description of PCI host bridges (Bjorn Helgaas) * pci/notes: PCI: Document ACPI description of PCI host bridges |
||
|
Linus Torvalds
|
01f0e5cded |
Merge tag 'kconfig-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- show clearer error messages where pkg-config is needed, but not
installed
- rename SYMBOL_AUTO to SYMBOL_NO_WRITE to reflect its semantics
- create all necessary directories by Kconfig tool itself instead of
Makefile
- update the .config unconditionally when syncconfig is invoked
- use 'include' directive instead of '-include' where
include/config/{auto,tristate}.conf is mandatory
- do not try to update the .config when running install targets
- add .DELETE_ON_ERROR to delete partially updated files
- misc cleanups and fixes
* tag 'kconfig-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: remove P_ENV property type
kconfig: remove unused sym_get_env_prop() function
kconfig: fix the rule of mainmenu_stmt symbol
init/Kconfig: Use short unix-style option instead of --longname
Kbuild: Makefile.modbuiltin: include auto.conf and tristate.conf mandatory
kbuild: remove auto.conf from prerequisite of phony targets
kbuild: do not update config for 'make kernelrelease'
kbuild: do not update config when running install targets
kbuild: add .DELETE_ON_ERROR special target
kbuild: use 'include' directive to load auto.conf from top Makefile
kconfig: allow all config targets to write auto.conf if missing
kconfig: make syncconfig update .config regardless of sym_change_count
kconfig: create directories needed for syncconfig by itself
kconfig: remove unneeded directory generation from local*config
kconfig: split out useful helpers in confdata.c
kconfig: rename file_write_dep and move it to confdata.c
kconfig: fix typos in description of "choice" in kconfig-language.txt
kconfig: handle format string before calling conf_message_callback()
kconfig: rename SYMBOL_AUTO to SYMBOL_NO_WRITE
kconfig: check for pkg-config on make {menu,n,g,x}config
|
||
|
Linus Torvalds
|
e026bcc561 |
Merge tag 'kbuild-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- verify depmod is installed before modules_install
- support build salt in case build ids must be unique between builds
- allow users to specify additional host compiler flags via HOST*FLAGS,
and rename internal variables to KBUILD_HOST*FLAGS
- update buildtar script to drop vax support, add arm64 support
- update builddeb script for better debarch support
- document the pit-fall of if_changed usage
- fix parallel build of UML with O= option
- make 'samples' target depend on headers_install to fix build errors
- remove deprecated host-progs variable
- add a new coccinelle script for refcount_t vs atomic_t check
- improve double-test coccinelle script
- misc cleanups and fixes
* tag 'kbuild-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits)
coccicheck: return proper error code on fail
Coccinelle: doubletest: reduce side effect false positives
kbuild: remove deprecated host-progs variable
kbuild: make samples really depend on headers_install
um: clean up archheaders recipe
kbuild: add %asm-generic to no-dot-config-targets
um: fix parallel building with O= option
scripts: Add Python 3 support to tracing/draw_functrace.py
builddeb: Add automatic support for sh{3,4}{,eb} architectures
builddeb: Add automatic support for riscv* architectures
builddeb: Add automatic support for m68k architecture
builddeb: Add automatic support for or1k architecture
builddeb: Add automatic support for sparc64 architecture
builddeb: Add automatic support for mips{,64}r6{,el} architectures
builddeb: Add automatic support for mips64el architecture
builddeb: Add automatic support for ppc64 and powerpcspe architectures
builddeb: Introduce functions to simplify kconfig tests in set_debarch
builddeb: Drop check for 32-bit s390
builddeb: Change architecture detection fallback to use dpkg-architecture
builddeb: Skip architecture detection when KBUILD_DEBARCH is set
...
|
||
|
Linus Torvalds
|
8c479c2c0f |
Merge tag 'hardened-usercopy-v4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardened usercopy updates from Kees Cook:
"This cleans up a minor Kconfig issue and adds a kernel boot option for
disabling hardened usercopy for distro users that may have corner-case
performance issues (e.g. high bandwidth small-packet UDP traffic).
Summary:
- drop unneeded Kconfig "select BUG" (Kamal Mostafa)
- add "hardened_usercopy=off" rare performance needs (Chris von
Recklinghausen)"
* tag 'hardened-usercopy-v4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
usercopy: Allow boot cmdline disabling of hardening
usercopy: Do not select BUG with HARDENED_USERCOPY
|
||
|
Stephen Boyd
|
ac7da1b787 |
Merge branches 'clk-actions-s700', 'clk-exynos-unused', 'clk-qcom-dispcc-845', 'clk-scmi-round' and 'clk-cs2000-spdx' into clk-next
* clk-actions-s700: : - Actions Semi Owl series S700 SoC clk driver clk: actions: Add S700 SoC clock support dt-bindings: clock: Add S700 support for Actions Semi Soc's clk: actions: Add missing REGMAP_MMIO dependency * clk-exynos-unused: : - Remove an unused variable from Exynos4412 ISP driver clk: samsung: Remove unused mout_user_aclk400_mcuisp_p4x12 variable * clk-qcom-dispcc-845: : - Qualcomm SDM845 display clock controller clk: qcom: Add display clock controller driver for SDM845 dt-bindings: clock: Introduce QCOM Display clock bindings clk: qcom: Move frequency table macro to common file * clk-scmi-round: : - Fix a thinko bug in SCMI clk division logic clk: scmi: Fix the rounding of clock rate * clk-cs2000-spdx: clk: cs2000-cp: convert to SPDX identifiers |
||
|
Stephen Boyd
|
032405a754 |
Merge branches 'clk-imx6-ocram', 'clk-missing-put', 'clk-tegra-sdmmc-jitter', 'clk-allwinner' and 'clk-uniphier' into clk-next
* clk-imx6-ocram: : - i.MX6SX ocram_s clk support clk: imx: add ocram_s clock for i.mx6sx * clk-missing-put: : - Add missing of_node_put()s in some i.MX clk drivers clk: imx6sll: fix missing of_node_put() clk: imx6ul: fix missing of_node_put() * clk-tegra-sdmmc-jitter: : - Tegra SDMMC clk jitter improvements with high speed signaling modes clk: tegra: make sdmmc2 and sdmmc4 as sdmmc clocks clk: tegra: Add sdmmc mux divider clock clk: tegra: Refactor fractional divider calculation clk: tegra: Fix includes required by fence_udelay() * clk-allwinner: clk: sunxi-ng: add A64 compatible string dt-bindings: add compatible string for the A64 DE2 CCU clk: sunxi-ng: r40: Export video PLLs clk: sunxi-ng: r40: Allow setting parent rate to display related clocks clk: sunxi-ng: r40: Add minimal rate for video PLLs * clk-uniphier: : - Uniphier NAND, USB3 PHY, and SPI clk support clk: uniphier: add clock frequency support for SPI clk: uniphier: add more USB3 PHY clocks clk: uniphier: add NAND 200MHz clock |
||
|
Stephen Boyd
|
d16adaf0b9 |
Merge branches 'clk-mvebu-spdx', 'clk-meson', 'clk-imx7d-mu', 'clk-imx-init-array-cleanup' and 'clk-rockchip' into clk-next
* clk-mvebu-spdx: clk: mvebu: armada-37xx-periph: switch to SPDX license identifier * clk-meson: clk: meson: add gen_clk clk: meson: gxbb: remove HHI_GEN_CLK_CTNL duplicate definition clk: meson-axg: add clocks required by pcie driver clk: meson: remove unused clk-audio-divider driver clk: meson: stop rate propagation for audio clocks clk: meson: axg: add the audio clock controller driver clk: meson: add axg audio sclk divider driver clk: meson: add triple phase clock driver clk: meson: add clk-phase clock driver clk: meson: clean-up meson clock configuration clk: meson: remove obsolete register access clk: meson: expose GEN_CLK clkid clk: meson-axg: add pcie and mipi clock bindings dt-bindings: clock: add meson axg audio clock controller bindings clk: meson: audio-divider is one based clk: meson-gxbb: set fclk_div2 as CLK_IS_CRITICAL * clk-imx7d-mu: : - i.MX7D mailbox clk support clk: imx7d: add IMX7D_MU_ROOT_CLK * clk-imx-init-array-cleanup: : - i.MX clk init arrays removed in place of CLK_IS_CRITICAL clk: imx6sx: remove clks_init_on array clk: imx6sl: remove clks_init_on array clk: imx6q: remove clks_init_on array * clk-rockchip: clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399 clk: rockchip: fix clk_i2sout parent selection bits on rk3399 clk: rockchip: add clock controller for px30 clk: rockchip: add support for half divider dt-bindings: add bindings for px30 clock controller clk: rockchip: add dt-binding header for px30 |
||
|
Stephen Boyd
|
ea4f7872c7 |
Merge branches 'clk-ingenic-fixes', 'clk-max9485', 'clk-pxa-32k-pll', 'clk-aspeed' and 'clk-imx6sll-gpio' into clk-next
* clk-ingenic-fixes: : - Ingenic i2s bit update and allow UDC clk to gate clk: ingenic: Add missing flag for UDC clock clk: ingenic: Fix incorrect data for the i2s clock * clk-max9485: : - Maxim 9485 Programmable Clock Generator clk: Add driver for MAX9485 dts: clk: add devicetree bindings for MAX9485 * clk-pxa-32k-pll: : - Expose 32 kHz PLL on PXA SoCs clk: pxa: export 32kHz PLL * clk-aspeed: : - Fix name of aspeed SDC clk define to have only one 'CLK' clk: aspeed: Fix SDCLK name * clk-imx6sll-gpio: : - imx6sll GPIO clk gate support clk: imx6sll: add GPIO LPCGs |
||
|
Stephen Boyd
|
b183c6887a |
Merge branches 'clk-imx6-video-parent', 'clk-qcom-sdm845-criticals', 'clk-renesas', 'clk-stratix10-fixes' and 'clk-atmel-i2s' into clk-next
* clk-imx6-video-parent: : - Fix i.MX6QDL video clk parent clk: imx6: fix video_27m parent for IMX6QDL_CLK_CKO1_SEL * clk-qcom-sdm845-criticals: : - critical clk markings for qcom SDM845 clk: qcom: Enable clocks which needs to be always on for SDM845 * clk-renesas: clk: renesas: Renesas R9A06G032 clock driver dt-bindings: clock: renesas,r9a06g032-sysctrl: documentation dt-bindings: clock: Add the r9a06g032-sysctrl.h file clk: renesas: r8a7795: Add CCREE clock clk: renesas: r8a7795: Add CR clock * clk-stratix10-fixes: : - Fix Stratix10 mpu_free_clk and sdmmc_free_clk parents clk: socfpga: stratix10: fix the sdmmc_free_clk mux clk: socfpga: stratix10: fix the parents of mpu_free_clk * clk-atmel-i2s: : - Atmel at91 I2S audio clk support clk: at91: add I2S clock mux driver dt-bindings: clk: at91: add an I2S mux clock |
||
|
Oleksij Rempel
|
d6ef139c83 |
dt-bindings: mailbox: imx-mu: add generic MU channel support
Each MU has four pairs of rx/tx data register with four rx/tx interrupts which can also be used as a separate channel. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> |
||
|
Dong Aisheng
|
480285bd11 |
dt-bindings: arm: fsl: add mu binding doc
The Messaging Unit module enables two processors within the SoC to communicate and coordinate by passing messages (e.g. data, status and control) through the MU interface. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> |
||
|
Linus Torvalds
|
e6ecec342f |
Merge tag 'docs-4.19' of git://git.lwn.net/linux
Pull documentation update from Jonathan Corbet: "This was a moderately busy cycle for docs, with the usual collection of small fixes and updates. We also have new ktime_get_*() docs from Arnd, some kernel-doc fixes, a new set of Italian translations (non so se vale la pena, ma non fa male - speriamo bene), and some extensive early memory-management documentation improvements from Mike Rapoport" * tag 'docs-4.19' of git://git.lwn.net/linux: (52 commits) Documentation: corrections to console/console.txt Documentation: add ioctl number entry for v4l2-subdev.h Remove gendered language from management style documentation scripts/kernel-doc: Escape all literal braces in regexes docs/mm: add description of boot time memory management docs/mm: memblock: add overview documentation docs/mm: memblock: add kernel-doc description for memblock types docs/mm: memblock: add kernel-doc comments for memblock_add[_node] docs/mm: memblock: update kernel-doc comments mm/memblock: add a name for memblock flags enumeration docs/mm: bootmem: add overview documentation docs/mm: bootmem: add kernel-doc description of 'struct bootmem_data' docs/mm: bootmem: fix kernel-doc warnings docs/mm: nobootmem: fixup kernel-doc comments mm/bootmem: drop duplicated kernel-doc comments Documentation: vm.txt: Adding 'nr_hugepages_mempolicy' parameter description. doc:it_IT: translation for kernel-hacking docs: Fix the reference labels in Locking.rst doc: tracing: Fix a typo of trace_stat mm: Introduce new type vm_fault_t ... |
||
|
Linus Torvalds
|
747f62305d |
Merge tag 'sound-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's been busy summer weeks and hence lots of changes, partly for a
few new drivers and partly for a wide range of fixes.
Here are highlights:
ALSA Core:
- Fix rawmidi buffer management, code cleanup / refactoring
- Fix the SG-buffer page handling with incorrect fallback size
- Fix the stall at virmidi trigger callback with a large buffer; also
offloading and code-refactoring along with it
- Various ALSA sequencer code cleanups
ASoC:
- Deploy the standard snd_pcm_stop_xrun() helper in several drivers
- Support for providing name prefixes to generic component nodes
- Quite a few fixes for DPCM as it gains a bit wider use and more
robust testing
- Generalization of the DIO2125 support to a simple amplifier driver
- Accessory detection support for the audio graph card
- DT support for PXA AC'97 devices
- Quirks for a number of new x86 systems
- Support for AM Logic Meson, Everest ES7154, Intel systems with
RT5682, Qualcomm QDSP6 and WCD9335, Realtek RT5682 and TI TAS5707
HD-audio:
- Code refactoring in HD-audio ext codec codes to drop own classes;
preliminary works for the upcoming legacy codec support
- Generalized DRM audio component for the upcoming radeon / amdgpu
support
- Unification of mic mute-LED and GPIO support for various codecs
- Further improvement of CA0132 codec support including Recon3D
- Proper vga_switcheroo handling for AMD i-GPU
- Update of model list in documentation
- Fixups for another HP Spectre x360, Conexant codecs, power-save
blacklist update
USB-audio:
- Fix the invalid sample rate setup with external clock
- Support of UAC3 selector units and processing units
- Basic UAC3 power-domain support
- Support for Encore mDSD and Thesycon-based DSD devices
- Preparation for future complete callback changes
Firewire:
- Add support for MOTU Traveler
Misc:
- The endianess notation fixes in various drivers
- Add fall-through comment in lots of drivers
- Various sparse warning fixes, e.g. about PCM format types"
* tag 'sound-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (529 commits)
ASoC: adav80x: mark expected switch fall-through
ASoC: da7219: Add delays to capture path to remove DC offset noise
ALSA: usb-audio: Mark expected switch fall-through
ALSA: mixart: Mark expected switch fall-through
ALSA: opl3: Mark expected switch fall-through
ALSA: hda/ca0132 - Add exit commands for Recon3D
ALSA: hda/ca0132 - Change mixer controls for Recon3D
ALSA: hda/ca0132 - Add Recon3D input and output select commands
ALSA: hda/ca0132 - Add DSP setup defaults for Recon3D
ALSA: hda/ca0132 - Add Recon3D startup functions and setup
ALSA: hda/ca0132 - Add bool variable to enable/disable pci region2 mmio
ALSA: hda/ca0132 - Add Recon3D pincfg
ALSA: hda/ca0132 - Add quirk ID and enum for Recon3D
ALSA: hda/ca0132 - Add alt_functions unsolicited response
ALSA: hda/ca0132 - Clean up ca0132_init function.
ALSA: hda/ca0132 - Create mmio gpio function to make code clearer
ASoC: wm_adsp: Make DSP name configurable by codec driver
ASoC: wm_adsp: Declare firmware controls from codec driver
ASoC: max98373: Added software reset register to readable registers
ASoC: wm_adsp: Correct DSP pointer for preloader control
...
|
||
|
Linus Torvalds
|
2c20443ec2 |
Merge tag 'acpi-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These revert two ACPICA commits that are not needed any more, rework
the property graphs support in ACPI to be more aligned with the
analogous DT code, add some new quirks and remove one that isn't
needed any more, add a special platform driver to enumerate multiple
I2C devices hooked up to the same device object in the ACPI tables and
update the battery and button drivers.
Specifics:
- Revert two ACPICA commits that are not needed any more (Erik
Schmauss).
- Rework property graph support in the ACPI device properties
framework to make it behave more like the analogous DT code and
update the documentation of it (Sakari Ailus).
- Change the default ACPI device status after initialization to
ACPI_STA_DEFAULT instead of 0 (Hans de Goede).
- Add a special platform driver for enumerating multiple I2C devices
hooked up to the same object in the ACPI tables (Hans de Goede).
- Fix the ACPI battery driver to avoid reporting full capacity on
systems without support for that and clean it up (Hans de Goede,
Dmitry Rozhkov, Lucas Rangit Magasweran).
- Add two system wakeup quirks to the ACPI EC driver (Aaron Ma, Mika
Westerberg).
- Add the touchscreen on Dell Venue Pro 7139 to the list of "always
present" devices to make it work (Tristian Celestin).
- Revert a special tables handling quirk for Dell XPS 9570 and
Precision M5530 which is not needed any more (Kai Heng Feng).
- Add support for a new OEM _OSI string to allow system vendors to
work around issues with NVidia HDMI audio (Alex Hung).
- Prevent the ACPI button driver from reporting excessive system
wakeup events and clean it up (Ravi Chandra Sadineni, Randy
Dunlap).
- Clean up two minor code style issues in the ACPI core and GHES
handling on ARM64 (Dongjiu Geng, John Garry, Tom Todd)"
* tag 'acpi-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (34 commits)
platform/x86: Add ACPI i2c-multi-instantiate pseudo driver
ACPI / x86: utils: Remove status workaround from acpi_device_always_present()
ACPI / scan: Create platform device for fwnodes with multiple i2c devices
ACPI / scan: Initialize status to ACPI_STA_DEFAULT
ACPI / EC: Add another entry for Thinkpad X1 Carbon 6th
ACPI: bus: Fix a pointer coding style issue
arm64 / ACPI: clean the additional checks before calling ghes_notify_sea()
ACPI / scan: Add static attribute to indirect_io_hosts[]
ACPI / battery: Do not export energy_full[_design] on devices without full_charge_capacity
ACPI / EC: Use ec_no_wakeup on ThinkPad X1 Yoga 3rd
ACPI / battery: get rid of negations in conditions
ACPI / battery: use specialized print macros
ACPI / battery: reorder headers alphabetically
ACPI / battery: drop inclusion of init.h
ACPI: battery: remove redundant old_present check on insertion
ACPI: property: graph: Update graph documentation to use generic references
ACPI: property: graph: Improve graph documentation for port/ep numbering
ACPI: property: graph: Fix graph documentation
ACPI: property: Update documentation for hierarchical data extension 1.1
ACPI: property: Document key numbering for hierarchical data extension refs
...
|
||
|
Linus Torvalds
|
b018fc9800 |
Merge tag 'pm-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add a new framework for CPU idle time injection, to be used by
all of the idle injection code in the kernel in the future, fix some
issues and add a number of relatively small extensions in multiple
places.
Specifics:
- Add a new framework for CPU idle time injection (Daniel Lezcano).
- Add AVS support to the armada-37xx cpufreq driver (Gregory
CLEMENT).
- Add support for current CPU frequency reporting to the ACPI CPPC
cpufreq driver (George Cherian).
- Rework the cooling device registration in the imx6q/thermal driver
(Bastian Stender).
- Make the pcc-cpufreq driver refuse to work with dynamic scaling
governors on systems with many CPUs to avoid scalability issues
with it (Rafael Wysocki).
- Fix the intel_pstate driver to report different maximum CPU
frequencies on systems where they really are different and to
ignore the turbo active ratio if hardware-managend P-states (HWP)
are in use; make it use the match_string() helper (Xie Yisheng,
Srinivas Pandruvada).
- Fix a minor deferred probe issue in the qcom-kryo cpufreq driver
(Niklas Cassel).
- Add a tracepoint for the tracking of frequency limits changes (from
Andriod) to the cpufreq core (Ruchi Kandoi).
- Fix a circular lock dependency between CPU hotplug and sysfs
locking in the cpufreq core reported by lockdep (Waiman Long).
- Avoid excessive error reports on driver registration failures in
the ARM cpuidle driver (Sudeep Holla).
- Add a new device links flag to the driver core to make links go
away automatically on supplier driver removal (Vivek Gautam).
- Eliminate potential race condition between system-wide power
management transitions and system shutdown (Pingfan Liu).
- Add a quirk to save NVS memory on system suspend for the ASUS 1025C
laptop (Willy Tarreau).
- Make more systems use suspend-to-idle (instead of ACPI S3) by
default (Tristian Celestin).
- Get rid of stack VLA usage in the low-level hibernation code on
64-bit x86 (Kees Cook).
- Fix error handling in the hibernation core and mark an expected
fall-through switch in it (Chengguang Xu, Gustavo Silva).
- Extend the generic power domains (genpd) framework to support
attaching a device to a power domain by name (Ulf Hansson).
- Fix device reference counting and user limits initialization in the
devfreq core (Arvind Yadav, Matthias Kaehlcke).
- Fix a few issues in the rk3399_dmc devfreq driver and improve its
documentation (Enric Balletbo i Serra, Lin Huang, Nick Milner).
- Drop a redundant error message from the exynos-ppmu devfreq driver
(Markus Elfring)"
* tag 'pm-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits)
PM / reboot: Eliminate race between reboot and suspend
PM / hibernate: Mark expected switch fall-through
cpufreq: intel_pstate: Ignore turbo active ratio in HWP
cpufreq: Fix a circular lock dependency problem
cpu/hotplug: Add a cpus_read_trylock() function
x86/power/hibernate_64: Remove VLA usage
cpufreq: trace frequency limits change
cpufreq: intel_pstate: Show different max frequency with turbo 3 and HWP
cpufreq: pcc-cpufreq: Disable dynamic scaling on many-CPU systems
cpufreq: qcom-kryo: Silently error out on EPROBE_DEFER
cpufreq / CPPC: Add cpuinfo_cur_freq support for CPPC
cpufreq: armada-37xx: Add AVS support
dt-bindings: marvell: Add documentation for the Armada 3700 AVS binding
PM / devfreq: rk3399_dmc: Fix duplicated opp table on reload.
PM / devfreq: Init user limits from OPP limits, not viceversa
PM / devfreq: rk3399_dmc: fix spelling mistakes.
PM / devfreq: rk3399_dmc: do not print error when get supply and clk defer.
dt-bindings: devfreq: rk3399_dmc: move interrupts to be optional.
PM / devfreq: rk3399_dmc: remove wait for dcf irq event.
dt-bindings: clock: add rk3399 DDR3 standard speed bins.
...
|
||
|
Linus Torvalds
|
c07b3682cd |
Merge tag 'leds-for-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"LED triggers improvements make the biggest part of this pull request.
The most striking ones, that allowed for nice cleanups in the triggers
are:
- centralized handling of creation and removal of trigger sysfs
attributes via attribute group
- addition of module_led_trigger() helper
The other things that need to be mentioned:
New features and improvements to existing LED class drivers:
- lt3593: add DT support, switch to gpiod interface
- lm3692x: support LED sync configuration, change OF calls to fwnode
calls
- apu: modify PC Engines apu/apu2 driver to support apu3
Change in the drivers/net/can/led.c:
- mark led trigger as broken since it's in the way for the further
cleanups. It implements a subset of the netdev trigger and an Ack
is needed from someone who can actually test and confirm that the
netdev trigger works for can devices"
* tag 'leds-for-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (32 commits)
leds: ns2: Change unsigned to unsigned int
usb: simplify usbport trigger
leds: gpio trigger: simplifications from core changes
leds: backlight trigger: simplifications from core changes
leds: activity trigger: simplifications from core changes
leds: default-on trigger: make use of module_led_trigger()
leds: heartbeat trigger: simplifications from core changes
leds: oneshot trigger: simplifications from core changes
leds: transient trigger: simplifications from core changes
leds: timer trigger: simplifications from core changes
leds: netdev trigger: simplifications from core changes
leds: triggers: new function led_set_trigger_data()
leds: triggers: define module_led_trigger helper
leds: triggers: handle .trigger_data and .activated() in the core
leds: triggers: add device attribute support
leds: triggers: let struct led_trigger::activate() return an error code
leds: triggers: make the MODULE_LICENSE string match the actual license
leds: lm3692x: Support LED sync configuration
dt: bindings: lm3692x: Update binding for LED sync control
leds: lm3692x: Change DT calls to fwnode calls
...
|
||
|
Linus Torvalds
|
4d88e3d249 |
Merge tag 'devicetree-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree updates from Rob Herring: - Remove an obsolete hack for PPC32 longtrail systems - Make of_io_request_and_map() "name" arg optional - Add vendor prefixes for bitmain, Asus, and Y Soft - Remove 'interrupt-parent' from bindings as it is implicit - New properties for wm8994 audio codec - Add 'clocks' property support to SRAM binding - Add binding for ASPEED coprocessor interrupt controller - Various binding spelling and link fixes * tag 'devicetree-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: Documentation: remove dynamic-resolution-notes reference to non-existent file dt-bindings: Add Y Soft Corporation vendor prefix of/fdt: Remove PPC32 longtrail hack in memory scan dt-bindings: remove 'interrupt-parent' from bindings pinctrl: tegra: fix spelling in devicetree binding document usb: dwc3: rockchip: Fix PHY documentation links. dt-bindings: sound: wm8994: document wlf,csnaddr-pd property dt-bindings: sound: wm8994: document wlf,spkmode-pu property dt-bindings: sram: Add 'clocks' as an optional property dt-bindings: Add vendor prefix for AsusTek Computer Inc. dt-bindings: misc: ASPEED coprocessor interrupt controller dt-bindings: gpio: pca953x: Document interrupts, update example drivers/of: Make of_io_request_and_map() "name" argument optional dt-bindings: Add bitmain vendor prefix Documentation: devicetree: tilcdc: fix spelling mistake "suppors" -> "supports" |