Now that we have support for the composite output, we can start adding new
supported standards. Start with PAL, and we will add other eventually.
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Some Allwinner SoCs have an IP called the TV encoder that is used to output
composite and VGA signals. In such a case, we need to use the second TCON
channel.
Add support for that TV encoder.
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
One of the A10 display pipeline possible output is an RGB interface to
drive LCD panels directly. This is done through the first channel of the
TCON that will output our video signals directly.
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The Allwinner A10 and subsequent SoCs share the same display pipeline, with
variations in the number of controllers (1 or 2), or the presence or not of
some output (HDMI, TV, VGA) or not.
Add a driver with a limited set of features for now, and we will hopefully
support all of them eventually
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
When crtc/timing is disabled on boot the dig block
should be stopped in order ignore timing from crtc,
reset the steering fifo otherwise we get display
corruption or hung in dp sst mode.
v2: agd: fix coding style
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following scenario:
1. Page table bo allocated in vram and linked to man->lru.
tbo->list_kref.refcount=2
2. Page table bo is swapped out and removed from man->lru.
tbo->list_kref.refcount=1
3. Command submission from userspace. Page table bo is moved
to vram. ttm_bo_move_to_lru_tail() link it to man->lru and
don't increase the kref count.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
And again make sure it's a no-op for modern drivers. Another case of
dev->struct_mutex gone for modern drivers!
Note that the entirety of the legacy addmap interface is now protected
by DRIVER_MODESET. Note that just auditing kernel code is not enough,
since userspace loves to set up legacy maps on it's own for various
things - with ums userspace and kernel space share control over
resources.
v2: Also add a DRIVER_* check like for all other maps functions to
really short-circuit the code. And give drm_legacy_rmmap used by the
dev unregister code the same treatment.
v3:
- remove redundant return; (Alex, Chris)
- don't special case nouveau with DRIVER_KMS_LEGACY_CONTEXT.
v4: Again special case nouveau. The problem is not directly in the
ddx, but that it calls dri1 functions from the X server. And those do
call drmAddMap. Fixed only in
commit b1a630b48210d6a3c44994fce1b73273000ace5c
Author: Dave Airlie <airlied@redhat.com>
Date: Wed Nov 7 14:45:14 2012 +1000
nouveau: drop DRI1 device open interface.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461741618-12679-1-git-send-email-daniel.vetter@ffwll.ch
Somehow my SNB GT1 (Dell XPS 8300) gets very unhappy around
GPU hangs if the RPS EI/thresholds aren't suitably aligned.
It seems like scheduling/timer interupts stop working somehow
and things get stuck eg. in usleep_range().
I bisected the problem down to
commit 8a5864377b ("drm/i915/skl: Restructured the gen6_set_rps_thresholds function")
I observed that before all the values were at least multiples of 25,
but afterwards they are not. And rounding things up to the next multiple
of 25 does seem to help, so lets' do that. I also tried roundup(..., 5)
but that wasn't sufficient. Also I have no idea if we might need this sort of
thing on gen9+ as well.
These are the original EI/thresholds:
LOW_POWER
GEN6_RP_UP_EI 12500
GEN6_RP_UP_THRESHOLD 11800
GEN6_RP_DOWN_EI 25000
GEN6_RP_DOWN_THRESHOLD 21250
BETWEEN
GEN6_RP_UP_EI 10250
GEN6_RP_UP_THRESHOLD 9225
GEN6_RP_DOWN_EI 25000
GEN6_RP_DOWN_THRESHOLD 18750
HIGH_POWER
GEN6_RP_UP_EI 8000
GEN6_RP_UP_THRESHOLD 6800
GEN6_RP_DOWN_EI 25000
GEN6_RP_DOWN_THRESHOLD 15000
These are after 8a5864377b:
LOW_POWER
GEN6_RP_UP_EI 12500
GEN6_RP_UP_THRESHOLD 11875
GEN6_RP_DOWN_EI 25000
GEN6_RP_DOWN_THRESHOLD 21250
BETWEEN
GEN6_RP_UP_EI 10156
GEN6_RP_UP_THRESHOLD 9140
GEN6_RP_DOWN_EI 25000
GEN6_RP_DOWN_THRESHOLD 18750
HIGH_POWER
GEN6_RP_UP_EI 7812
GEN6_RP_UP_THRESHOLD 6640
GEN6_RP_DOWN_EI 25000
GEN6_RP_DOWN_THRESHOLD 15000
And these are what we have after this patch:
LOW_POWER
GEN6_RP_UP_EI 12500
GEN6_RP_UP_THRESHOLD 11875
GEN6_RP_DOWN_EI 25000
GEN6_RP_DOWN_THRESHOLD 21250
BETWEEN
GEN6_RP_UP_EI 10175
GEN6_RP_UP_THRESHOLD 9150
GEN6_RP_DOWN_EI 25000
GEN6_RP_DOWN_THRESHOLD 18750
HIGH_POWER
GEN6_RP_UP_EI 7825
GEN6_RP_UP_THRESHOLD 6650
GEN6_RP_DOWN_EI 25000
GEN6_RP_DOWN_THRESHOLD 15000
Cc: stable@vger.kernel.org
Cc: Akash Goel <akash.goel@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Testcase: igt/kms_pipe_crc_basic/hang-read-crc-pipe-B
Fixes: 8a5864377b ("drm/i915/skl: Restructured the gen6_set_rps_thresholds function")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461159836-9108-1-git-send-email-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
(cherry picked from commit 8a292d016d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This patch does the following:
- Fakes live status of HDMI as connected (even if that's not).
While testing certain (monitor + cable) combinations with
various intel platforms, it seems that live status register
doesn't work reliably on some older devices. So limit the
live_status check for HDMI detection, only for platforms
from gen7 onwards.
V2: restrict faking live_status to certain platforms
V3: (Ville)
- keep the debug message for !live_status case
- fix indentation of comment
- remove "warning" from the debug message
(Jani)
- Change format of fix details in the commit message
Fixes: 237ed86c69 ("drm/i915: Check live status before reading edid")
Cc: stable@vger.kernel.org # v4.4
Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461237606-16491-1-git-send-email-shashank.sharma@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 4f4a818501)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The driver's VDD on/off logic assumes that whenever the VDD is on we
also hold an AUX power domain reference. Since BIOS can leave the VDD on
during booting and resuming and on DDI platforms we won't take a
corresponding power reference, the above assumption won't hold on those
platforms and an eventual delayed VDD off work will do an extraneous AUX
power domain put resulting in a refcount underflow. Fix this the same
way we did this for non-DDI DP encoders:
commit 6d93c0c417 ("drm/i915: fix VDD state tracking after system
resume")
At the same time call the DP encoder suspend handler the same way as the
non-DDI DP encoders do to flush any pending VDD off work. Leaving the
work running may cause a HW access where we don't expect this (at a point
where power domains are suspended already).
While at it remove an unnecessary function call indirection.
This fixed for me AUX refcount underflow problems on BXT during
suspend/resume.
CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
CC: stable@vger.kernel.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1460963062-13211-4-git-send-email-imre.deak@intel.com
(cherry picked from commit bf93ba67e9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
During system resume we depended on pci_enable_device() also putting the
device into PCI D0 state. This won't work if the PCI device was already
enabled but still in D3 state. This is because pci_enable_device() is
refcounted and will not change the HW state if called with a non-zero
refcount. Leaving the device in D3 will make all subsequent device
accesses fail.
This didn't cause a problem most of the time, since we resumed with an
enable refcount of 0. But it fails at least after module reload because
after that we also happen to leak a PCI device enable reference: During
probing we call drm_get_pci_dev() which will enable the PCI device, but
during device removal drm_put_dev() won't disable it. This is a bug of
its own in DRM core, but without much harm as it only leaves the PCI
device enabled. Fixing it is also a bit more involved, due to DRM
mid-layering and because it affects non-i915 drivers too. The fix in
this patch is valid regardless of the problem in DRM core.
v2:
- Add a code comment about the relation of this fix to the freeze/thaw
vs. the suspend/resume phases. (Ville)
- Add a code comment about the inconsistent ordering of set power state
and device enable calls. (Chris)
CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
CC: Chris Wilson <chris@chris-wilson.co.uk>
CC: stable@vger.kernel.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1460979954-14503-1-git-send-email-imre.deak@intel.com
(cherry picked from commit 44410cd0bf)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Need to move the free function around a bit, but otherwise mostly
just removing code.
Specifically we can nuke all the _locked variants since the weak idr
reference is now protected by the idr_mutex, which we never hold
anywhere expect in the lookup/reg/unreg functions. And those never
call anything else.
Another benefit of this is that this patch switches the weak reference
logic from kref_put_mutex to kref_get_unless_zero. And the later is in
general more flexible wrt accomodating multiple weak references
protected by different locks, which might or might not come handy
eventually.
But one consequence of that switch is that we need to acquire the
blob_lock from the free function for the list_del calls. That's a bit
tricky to pull off, but works well if we pick the exact same scheme as
is already used for framebuffers. Most important changes:
- filp list is maintainer by create/destroy_blob ioctls directly
(already the case, so we can just remove the redundant list_del from
the free function).
- filp close handler walks the filp-private list lockless - works
because we know no one else can access it. I copied the same comment
from the fb code over to explain this.
- Otherwise we need to sufficiently restrict blob_lock critical
sections to avoid all the unreference calls. Easy to do once the
blob_lock only protects the list, and no longer the weak reference.
Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie had at least the refcount leak fixed in a later patch (but
that patch does other things which need a bit more work). But we still
have the trouble that silly userspace could hit the WARN_ON in
drm_mode_object_find.
Fix this all up to make sure we don't leak objects, and don't spew
into demsg.
Fixes: d0f37cf629 ("drm/mode: move framebuffer reference into object.")
Testcase: igt/kms_addfb_basic/invalid-*-prop*
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Slipped through the cracks in my review. The one issue I spotted
is that drm_mode_object_find now acquires references and can be
used on FB objects, which caused follow-on bugs in get/set_prop ioctls.
Follow-up patches will fix that.
[airlied: fixup some incr fb/decr object mixups]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is DRM driver for ARC PGU - simple bitstreamer used on
Synopsys ARC SDP boards (both AXS101 and AXS103).
* 'topic-arcpgu-v6' of https://github.com/foss-for-synopsys-dwc-arc-processors/linux:
arc: axs10x - add support of ARC PGU
MAINTAINERS: Add maintainer for ARC PGU display controller
drm: Add DT bindings documentation for ARC PGU display controller
drm: Add support of ARC PGU display controller
virtio_gpu was failing to send vblank events when using the atomic IOCTL
with the DRM_MODE_PAGE_FLIP_EVENT flag set. This patch fixes each and
enables atomic pageflips updates.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
We can thank KASAN for finding this, otherwise I probably would have spent
hours on it. This fixes a somewhat harder to trigger kernel panic, occuring
while enabling MST where the port we were currently updating the payload on
would have all of it's refs dropped before we finished what we were doing:
==================================================================
BUG: KASAN: use-after-free in drm_dp_update_payload_part1+0xb3f/0xdb0 [drm_kms_helper] at addr ffff8800d29de018
Read of size 4 by task Xorg/973
=============================================================================
BUG kmalloc-2048 (Tainted: G B W ): kasan: bad access detected
-----------------------------------------------------------------------------
INFO: Allocated in drm_dp_add_port+0x1aa/0x1ed0 [drm_kms_helper] age=16477 cpu=0 pid=2175
___slab_alloc+0x472/0x490
__slab_alloc+0x20/0x40
kmem_cache_alloc_trace+0x151/0x190
drm_dp_add_port+0x1aa/0x1ed0 [drm_kms_helper]
drm_dp_send_link_address+0x526/0x960 [drm_kms_helper]
drm_dp_check_and_send_link_address+0x1ac/0x210 [drm_kms_helper]
drm_dp_mst_link_probe_work+0x77/0xd0 [drm_kms_helper]
process_one_work+0x562/0x1350
worker_thread+0xd9/0x1390
kthread+0x1c5/0x260
ret_from_fork+0x22/0x40
INFO: Freed in drm_dp_free_mst_port+0x50/0x60 [drm_kms_helper] age=7521 cpu=0 pid=2175
__slab_free+0x17f/0x2d0
kfree+0x169/0x180
drm_dp_free_mst_port+0x50/0x60 [drm_kms_helper]
drm_dp_destroy_connector_work+0x2b8/0x490 [drm_kms_helper]
process_one_work+0x562/0x1350
worker_thread+0xd9/0x1390
kthread+0x1c5/0x260
ret_from_fork+0x22/0x40
which on this T460s, would eventually lead to kernel panics in somewhat
random places later in intel_mst_enable_dp() if we got lucky enough.
Signed-off-by: Lyude <cpaul@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
just a single fix to not move the GPU linear window on cores where it
might lead to inconsistent views of the memory by different engines in
the core, thus breaking relocs and possibly causing other fun.
* 'drm-etnaviv-fixes' of git://git.pengutronix.de:/git/lst/linux:
drm/etnaviv: don't move linear memory window on 3D cores without MC2.0
The driver supports now a second platform and received several
fixes, hence a version increment is justified.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Free fbdev CMA using drm_fbdev_cma_fini on unload. This fixes
a warning when unloading the driver:
WARNING: CPU: 0 PID: 164 at drivers/gpu/drm/drm_crtc.c:5930 drm_mode_config_cleanup+0x204/0x208
Signed-off-by: Stefan Agner <stefan@agner.ch>
The driver uses different variable names for struct drm_device
across functions which is confusing. Stick to the more common
variable name dev. While at it, remove unnecessary if statement
in error handling.
Signed-off-by: Stefan Agner <stefan@agner.ch>
If the device tree property fsl,panel is missing, drm_panel_attach
is called with a NULL pointer as first argument. Having a panel is
basically mandatory since RGB is the only supported connector.
Check if a panel node has been found, return -ENODEV and cleanup
otherwise.
Signed-off-by: Stefan Agner <stefan@agner.ch>
The fsl-dcu driver copies a drm_mode_config object to its
stack but then only accesses a single member (dpms_property)
once. The data structure is large enough to trigger a warning
about the amount of kernel stack being used:
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c: In function 'fsl_dcu_drm_connector_create':
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c:182:1: error: the frame size of 1040 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
This changes the fsl_dcu_drm_connector_create() function to
only access the drm_mode_config by reference, which is also
more efficient.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 109eee2f2a ("drm/layerscape: Add Freescale DCU DRM driver")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Add driver for the TCON (timing controller) module. The TCON module
is a separate module attached after the DCU (display controller
unit). Each DCU instance has its own, directly connected TCON
instance. The DCU's RGB and timing signals are passing through
the TCON module. TCON can provide timing signals for raw TFT panels
or operate in a bypass mode which leaves all signals unaltered.
The driver currently only supports the bypass mode.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Use the common clock framework to calculate the pixel clock
dividier. The previous implementation rounded down the calculated
factor. Thanks to the CLK_DIVIDER_ROUND_CLOSEST flag using the
common clock framework divider implementation improves the pixel
clock accuracy in some cases. Ontop of that it also allows to see
the actual pixel clock in the sysfs clock summary.
Signed-off-by: Stefan Agner <stefan@agner.ch>
