Given that HuC load is delayed on DG2, this patch adds support for a fence
that can be used to wait for load completion. No waiters are added in this
patch (they're coming up in the next one), to keep the focus of the
patch on the tracking logic.
The full HuC loading flow on boot DG2 is as follows:
1) i915 exports the GSC as an aux device;
2) the mei-gsc driver is loaded on the aux device;
3) the mei-pxp component is loaded;
4) mei-pxp calls back into i915 and we load the HuC.
Between steps 1 and 2 there can be several seconds of gap, mainly due to
the kernel doing other work during the boot.
The resume flow is slightly different, because we don't need to
re-expose or re-probe the aux device, so we go directly to step 3 once
i915 and mei-gsc have completed their resume flow.
Here's an example of the boot timing, captured with some logs added to
i915:
[ 17.908307] [drm] adding GSC device
[ 17.915717] [drm] i915 probe done
[ 22.282917] [drm] mei-gsc bound
[ 22.938153] [drm] HuC authenticated
Also to note is that if something goes wrong during GSC HW init the
mei-gsc driver will still bind, but steps 3 and 4 will not happen.
The status tracking is done by registering a bus_notifier to receive a
callback when the mei-gsc driver binds, with a large enough timeout to
account for delays. Once mei-gsc is bound, we switch to a smaller
timeout to wait for the mei-pxp component to load.
The fence is signalled on HuC load complete or if anything goes wrong in
any of the tracking steps. Timeout are enforced via hrtimer callbacks.
v2: fix includes (Jani)
v5: gsc_notifier() remove unneeded ()
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-12-daniele.ceraolospurio@intel.com
The GSC will perform both the load and the authentication, so we just
need to check the auth bit after the GSC has replied.
Since we require the PXP module to load the HuC, the earliest we can
trigger the load is during the pxp_bind operation.
Note that GSC-loaded HuC survives GT reset, so we need to just mark it
as ready when we re-init the GT HW.
V2: move setting of HuC fw error state to the failure path of the HuC
auth function, so it covers both the legacy and new auth flows
V4:
1. Fix typo in the commit message
2. style fix in intel_huc_wait_for_auth_complete()
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-11-daniele.ceraolospurio@intel.com
Several of our i915 header files, have been including i915_reg.h. This
means that any change to i915_reg.h will trigger a full rebuild of
pretty much every file of the driver, even those that don't have any
kind of register access. Let's delete the i915_reg.h include from all
headers and add an explicit include from the .c files that truly
need the register definitions; those that need a definition of
i915_reg_t for a function definition can get it from i915_reg_defs.h
instead.
We also remove two non-register #define's (VLV_DISPLAY_BASE and
GEN12_SFC_DONE_MAX) into i915_reg_defs.h to allow us to drop the
i915_reg.h include from a couple of headers.
There's probably a lot more header dependency optimization possible, but
the changes here roughly cut the number of files compiled after 'touch
i915_reg.h' in half --- a good first step.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-7-matthew.d.roper@intel.com
To be able to setup GuC submission functions during engine init we need
to commit to using GuC as soon as possible.
Currently, the only thing that can stop us from using the
microcontrollers once we've fetched the blobs is a fundamental
error (e.g. OOM); given that if we hit such an error we can't really
fall-back to anything, we can "officialize" the FW fetching completion
as the moment at which we're committing to using GuC.
To better differentiate this case, the uses_guc check, which indicates
that GuC is supported and was selected in modparam, is renamed to
wants_guc and a new uses_guc is introduced to represent the case were
we're committed to using the GuC. Note that uses_guc does still not imply
that the blob is actually loaded on the HW (is_running is the check for
that). Also, since we need to have attempted the fetch for the result
of uses_guc to be meaningful, we need to make sure we've moved away
from INTEL_UC_FIRMWARE_SELECTED.
All the GuC changes have been mirrored on the HuC for coherency.
v2: split fetch return changes and new macros to their own patches,
support HuC only if GuC is wanted, improve "used" state
description (Michal)
v3: s/wants_huc/uses_huc in uc_init_wopcm
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Fernando Pacheco <fernando.pacheco@intel.com> #v1
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-6-daniele.ceraolospurio@intel.com
