Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc and other driver subsystem changes
for 6.2-rc1. Nothing earth-shattering in here at all, just a lot of
new driver development and minor fixes.
Highlights include:
- fastrpc driver updates
- iio new drivers and updates
- habanalabs driver updates for new hardware and features
- slimbus driver updates
- speakup module parameters added to aid in boot time configuration
- i2c probe_new conversions for lots of different drivers
- other small driver fixes and additions
One semi-interesting change in here is the increase of the number of
misc dynamic minors available to 1048448 to handle new huge-cpu
systems.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (521 commits)
extcon: usbc-tusb320: Convert to i2c's .probe_new()
extcon: rt8973: Convert to i2c's .probe_new()
extcon: fsa9480: Convert to i2c's .probe_new()
extcon: max77843: Replace irqchip mask_invert with unmask_base
chardev: fix error handling in cdev_device_add()
mcb: mcb-parse: fix error handing in chameleon_parse_gdd()
drivers: mcb: fix resource leak in mcb_probe()
coresight: etm4x: fix repeated words in comments
coresight: cti: Fix null pointer error on CTI init before ETM
coresight: trbe: remove cpuhp instance node before remove cpuhp state
counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update
misc: fastrpc: Add dma_mask to fastrpc_channel_ctx
misc: fastrpc: Add mmap request assigning for static PD pool
misc: fastrpc: Safekeep mmaps on interrupted invoke
misc: fastrpc: Add support for audiopd
misc: fastrpc: Rework fastrpc_req_munmap
misc: fastrpc: Use fastrpc_map_put in fastrpc_map_create on fail
misc: fastrpc: Add fastrpc_remote_heap_alloc
misc: fastrpc: Add reserved mem support
misc: fastrpc: Rename audio protection domain to root
...
Current implementation is fixing the page size to PAGE_SIZE whereas the
input page size may be different.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In case EEPROM is not burned, firmware sets default EEPROM values.
As this is not valid in production, driver should fail load upon any
EEPROM error reported by firmware.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The engines idle mask was increased to be an array of 4 u64 entries.
To make the print of this mask more readable, remove the "0x" prefix,
and zero-pad each u64 to 16 bytes if either it isn't zero or if any of
the higher-order u64's is not zero.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reserved encapsulated signals which were not released hold the context
refcount, leading to a failure when killing the user process on device
reset or device fini.
Add the release of these left signals in the CS roll-back process.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
hl_encaps_handle_do_release_sob() can be called only when the last
reference to the context object is released and hl_ctx_do_release() is
initiated, and therefore it shouldn't call hl_ctx_put().
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Failing to kill a user process during a hard reset can be due to a
reference to the user context which isn't released.
To make it easier to understand if this the reason for the failure and
not something else, add a print of the context refcount value.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This is similar to RMWREG32, but the given 'val' is already shifted
according to the mask.
This allows several 'ORed' vals and masks to be set at once
The patch also fixes wrong usage of RMWREG32 by replacing
it with RMWREG32_SHIFTED
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When the new CPUCP opcodes are not supported and a CPUCP packet fails,
the return value is the F/W error resposone which is a positive value.
If this packet is sent from IOCTL and the positive value is used, the
ICOTL will not be considered as unsuccessful.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The clang-analyzer reported a warning: "Value stored to 'rc' is never
read".
The return value check for the first hl_fw_dynamic_send_clear_cmd() call
in hl_fw_dynamic_send_protocol_cmd() appears to be missing.
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Increase the size of the busy engines mask in 'struct hl_info_hw_idle',
for future ASICs with more than 128 engines.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Processes that use our device are likely to use at the same time other
devices such as remote storage.
In case our device is removed and a user process is still using the
device, we need to kill the user process. However, if that process
has a thread waiting for i/o to complete on remote storage, for example,
the process won't terminate.
Let's give it enough time to terminate before giving up.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
schedule_hard_reset can be true only if we didn't do hard-reset.
Therefore, no point of checking it in case hard_reset is true.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
If the device file is released while a context is still held, it won't
be possible to reopen it until the context is eventually released.
If that doesn't happen, only a device reset will revert it back to an
operational state, i.e. need to wait for a CS timeout or an error, or to
wait for an external intervention of injecting a reset via sysfs.
At this stage, after the device was released by user, context is held
either because of CS which were left running on the device and are not
relevant anymore, or due to missing cleanup steps from user side.
All of this is in any case handled in the device reset flow, so initiate
the reset at this point instead of waiting for it.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Some ASICs haven't yet implemented this functionality and so the
ioctl call should fail and the user should be notified of the reason.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This is needed to allow adding more data to the lkd_fw_comms_desc
structure.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Each time razwi (read-only zero, write ignored) event happens, besides
capturing its data, also notify the user about it.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Each time page fault happens, besides capturing its data, also notify
the user about it.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Creating event queue workqueue using alloc_workqueue made it run in
multi threaded mode, which caused parallel dumping of events as well as
parallel events notifying to user, causing logs with multiple
events to be out of order.
Fixed by creating event queue workqueue as single threaded work queue.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Each time razwi (read-only zero, write ignore) happens, besides
capturing its data, also notify the user about it.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add support for Gaudi2 Device with PCI revision 2.
Functionality is exactly the same as revision 1, the only difference
is device name exposed to user.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to know if driver catches PCI errors correctly, we need to
print a warning per each error.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
hl_access_sram_dram_region() uses a region base which is set within the
hl_set_dram_bar() function. However, for SRAM access this function is
not called, and we end up with a wrong value of region base and with a
bad calculated address.
Fix it by initializing the region base value independently of whether
hl_set_dram_bar() is called or not.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
To avoid memory corruption in kernel memory while using timestamp
registration nodes, zero the kernel buff memory when its allocated.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Consecutive error protects a device reset loop from being triggered
due to h/w issues and enters the device into an unavailable state.
When user may cause the error, an unavailable state
will prevent the user from running its workloads.
The commit prevents entering consecutive state when a user context
is enabled.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Use graceful hard reset when detecting a CS timeout that requires a
device reset.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add an option to control the timeout value for the driver's watchdog
of the reset process. The timeout represents the amount of the user
has to close his process once he gets a device reset notification from
the driver.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Calling hl_device_reset() for a hard reset will lead to a quite
immediate device reset and to killing user process.
For resets that follow errors, it disables the option to debug the
errors on both the device side and the user application side.
This patch adds a 'graceful hard reset' option and a new
hl_device_cond_reset() function.
Under some conditions, mainly if there is no user process or if he is
not registered to driver notifications, this function will execute hard
reset as usual.
Otherwise, the reset will be postponed and a notification will be sent
to user, to let him perform post-error actions and then to release the
device, after which reset will take place.
If device is not released by user in some defined time, a watchdog work
will execute the reset in any case.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As there are 2 types of user mappings, pmmu and hmmu, calculate
only the relevant mappings for the requested type.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Up until now the use-case in the driver was that the HBM is accessed
using the HBM BAR, yet the BAR sometimes cannot cover the whole HBM and
so we needed to set the BAR to other HBM offset.
Now we are facing the need to access other PCI memory regions that can
be covered by the HBM BAR.
To answer that we are allowing the caller to determine if the HBM BAR
need to be set or not regardless of the PCI memory region.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The code uses the pointer for trace purpose (without actually
dereference it) but still get static analysis warning.
This patch eliminate the warning.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The event notifier mechanism should not raise an empty
event (event equals zero).
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
'struct hl_device_reset_work' is used as a wrapper for the reset work
and its parameters, including the reset workqueue on which it runs.
In a future commit, another reset related work with similar parameters
is going to be added, but it won't use the reset workqueue.
As in any case there is a single reset workqueue, and to allow the resue
of this structure, move the reset workqueue to 'struct hl_device'.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Unregistering eventfd is for releasing host resources and doesn't
involve an access to the device. As such, there is no reason to disallow
it when device isn't operational.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
If reset upon device release is enabled, there is no need to check the
device idle status in hpriv_release(), because device is going to be
reset in any case.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
pf was an abbreviation for prefetch but because pf already stands
for 'physical function', we decided to change it to 'prefetch'.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Only the first page fault will be saved.
Besides the address which caused the page fault, the driver captures
all of the mmu user mappings.
User can retrieve this data via the new uapi (new opcode in INFO ioctl).
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This event notification was compatible only with gaudi, where razwi
and page fault happens together.
To make it compatible with all ASICs, this refactor contains:
1. Razwi notification will only notify about razwi info.
New notification will be added in future patch, to retrieve data
about page fault error.
2. Changed razwi info structure to support all ASICs.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Monitoring apps would like to query device state at any time so we
should allow it also during reset because it doesn't involve
accessing the h/w.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
If hl_cpu_accessible_dma_pool_alloc() fails, we should check
'req_cpu_addr', fix it.
Fixes: 0c88760f8f ("habanalabs/gaudi2: add secured attestation info uapi")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When doing sizeof() and giving as argument a dereference of
a pointer-to-a-pointer object, clang will issue a warning.
Eliminate the warning by passing struct <name>*
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
To be forward-backward compatible with the firmware in the initial
communication during preboot, we need to remove the validation of the
header size. This will allow us to add more fields to the
lkd_fw_comms_desc structure.
Instead of the validation of the header size, we just print warning
when some mismatch in descriptor has been revealed, and we calculate
the CRC base on descriptor size reported by the firmware instead of
calculating it ourselves.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
If the user wants to open the device, and the device is currently in
reset, the user will get an error from the open().
We don't need to display an error in the dmesg for that as it is
not a real error and we can spam the kernel log with this message.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
User will provide a nonce via the ioctl, and will retrieve
secured attestation data of the boot, generated using given
nonce.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
