Example 3 is a dual-cluster example, meaning that the CPU nodes should
have reg values 0x0, 0x1, 0x100, 0x101. The example incorrectly uses
decimal 0, 1, 100, 101 instead, which seems unintended. Use the correct
hexadecimal values.
Even though the value doesn't change for the first two CPUs, 0 and 1 in
example 3 are changed to 0x0 and 0x1 respectively for consistency. Other
examples all have reg less than 10, so they have not been changed.
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260403-dt-bindings-opp-v2-hex-cpu-reg-v1-1-38a4968ab515@iscas.ac.cn
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
There have been several renamings and modified Make rules since
introduction of this unittest document.
The file list in the Chinese translation had been extended.
For a change to drivers/of/unittest-data/tests-*.dtsi surrounding
translation has to be updated.
Signed-off-by: Markus Heidelberg <m.heidelberg@cab.de>
Link: https://patch.msgid.link/20260223111207.54640-1-m.heidelberg@cab.de
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Pull RTC updates from Alexandre Belloni:
- loongson: Loongson-2K0300 support
- s35390a: nvmem support
- zynqmp: rework calibration
* tag 'rtc-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: ds1390: fix number of bytes read from RTC
rtc: class: Remove duplicate check for alarm
rtc: optee: simplify OP-TEE context match
rtc: interface: Alarm race handling should not discard preceding error
rtc: s35390a: implement nvmem support
rtc: loongson: Add Loongson-2K0300 support
dt-bindings: rtc: loongson: Document Loongson-2K0300 compatible
dt-bindings: rtc: loongson: Correct Loongson-1C interrupts property
dt-bindings: rtc: renesas,rz-rtca3: Add RZ/V2N support
dt-bindings: rtc: cpcap: convert to schema
rtc: zynqmp: use dynamic max and min offset ranges
rtc: zynqmp: rework set_offset
rtc: zynqmp: rework read_offset
rtc: zynqmp: check calibration max value
rtc: zynqmp: correct frequency value
rtc: amlogic-a4: Remove IRQF_ONESHOT
rtc: pcf8563: use correct of_node for output clock
rtc: max31335: use correct CONFIG symbol in IS_REACHABLE()
rtc: nvvrs: Add ARCH_TEGRA to the NV VRS RTC driver
Pull more i2c updates from Wolfram Sang:
"Designware:
- refactor the transfer path to support I2C_M_STOP
- handle pm runtime by using the active auto try macros
- handle controllers lacking explicit START and STOP conditions
- general cleanups
Other i2c drivers:
- qualcomm: add support for qcs8300-cci
- amd8111: general cleanups
- cp2112: add DT bindings"
* tag 'i2c-for-7.0-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: Add CP2112 HID USB to SMBus Bridge
i2c: amd8111: switch to devm_ functions
i2c: amd8111: Remove spaces in MODULE_* macros
i2c: designware-platdrv: fix cleanup on probe failure
i2c: designware-platdrv: simplify reset control
dt-bindings: i2c: qcom-cci: Document qcs8300 compatible
i2c: designware: Remove dead code in AMD ISP case
i2c: designware: Support of controller with IC_EMPTYFIFO_HOLD_MASTER disabled
i2c: designware: Use runtime PM macro for auto-cleanup
i2c: designware: Implement I2C_M_STOP support
Pull sound fixes from Takashi Iwai:
"Here are a bunch of updates, but there should be no big surprises;
mostly device-specific quirks and fix-ups or non-code changes:
- Quirks for ASoC AMD, HD-audio and USB-audio
- Fixes in ASoC fsl, rockchip, renesas, aw codecs
- Fixes for USB-audio packet handling in the implicit feedback mode
- Updates of SPDX license IDs in some files"
* tag 'sound-fix-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits)
ASoC: rockchip: i2s-tdm: Use param rate if not provided by set_sysclk
ALSA: hda/hdmi: Add quirk for TUXEDO IBS14G6
ASoC: dt-bindings: asahi-kasei,ak5558: Fix the supply names
ASoC: dt-bindings: asahi-kasei,ak4458: Fix the supply names
ASoC: dt-bindings: asahi-kasei,ak4458: set unevaluatedProperties:false
ASoC: amd: amd_sdw: add machine driver quirk for Lenovo models
ASoC: amd: acp: Add ACP7.0 match entries for Realtek parts
ALSA: echoaudio: Add SPDX ids to some files
ALSA: isa: Add SPDX id lines to some files
ALSA: core: Add SPDX license id to files
ASoC: tas2783A: add explicit port prepare handling
ASoC: renesas: rz-ssi: Fix playback and capture
ALSA: hda/realtek: Fix headset mic on ASUS Zenbook 14 UX3405MA
ALSA: hda/conexant: Fix headphone jack handling on Acer Swift SF314
ASoC: qcom: sm8250: Add quinary MI2S support
ASoC: amd: yc: Add DMI quirk for ASUS Vivobook Pro 15X M6501RR
ALSA: usb-audio: Avoid potentially repeated XRUN error messages
ALSA: usb-audio: Add sanity check for OOB writes at silencing
ALSA: usb-audio: Optimize the copy of packet sizes for implicit fb handling
ALSA: usb-audio: Update the number of packets properly at receiving
...
In the original txt format binding document ak4458.txt, the supply names
are 'AVDD-supply', 'DVDD-supply', and they are also used in driver. But in
the commit converting to yaml format, they are changed to 'avdd-supply',
'dvdd-supply'. After search all the dts file, these names 'AVDD-supply',
'DVDD-supply', 'avdd-supply', 'dvdd-supply' are not used in any dts
file. So it is safe to fix the yaml binding document.
Fixes: 829d78e3ea ("ASoC: dt-bindings: ak5558: Convert to dtschema")
Cc: stable@vger.kernel.org
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260212021829.3244736-4-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the original txt format binding document ak4458.txt, the supply names
are 'AVDD-supply', 'DVDD-supply', and they are also used in driver. But in
the commit converting to yaml format, they are changed to 'avdd-supply',
'dvdd-supply'. After search all the dts file, these names 'AVDD-supply',
'DVDD-supply', 'avdd-supply', 'dvdd-supply' are not used in any dts
file. So it is safe to fix this yaml binding document.
Fixes: 009e83b591 ("ASoC: dt-bindings: ak4458: Convert to dtschema")
Cc: stable@vger.kernel.org
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260212021829.3244736-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull dmaengine updates from Vinod Koul:
"Core:
- Add Frank Li as susbstem reviewer to help with reviews
New Support:
- Mediatek support for Dimensity 6300 and 9200 controller
- Qualcomm Kaanapali and Glymur GPI DMA engine
- Synopsis DW AXI Agilex5
- Renesas RZ/V2N SoC
- Atmel microchip lan9691-dma
- Tegra ADMA tegra264
Updates:
- sg_nents_for_dma() helper use in subsystem
- pm_runtime_mark_last_busy() redundant call update for subsystem
- Residue support for xilinx AXIDMA driver
- Intel Max SGL Size Support and capabilities for DSA3.0
- AXI dma larger than 32bits address support"
* tag 'dmaengine-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (64 commits)
dmaengine: add Frank Li as reviewer
dt-bindings: dma: qcom,gpi: Update max interrupts lines to 16
dmaengine: fsl-edma: don't explicitly disable clocks in .remove()
dmaengine: xilinx: xdma: use sg_nents_for_dma() helper
dmaengine: sh: use sg_nents_for_dma() helper
dmaengine: sa11x0: use sg_nents_for_dma() helper
dmaengine: qcom: bam_dma: use sg_nents_for_dma() helper
dmaengine: qcom: adm: use sg_nents_for_dma() helper
dmaengine: pxa-dma: use sg_nents_for_dma() helper
dmaengine: lgm: use sg_nents_for_dma() helper
dmaengine: k3dma: use sg_nents_for_dma() helper
dmaengine: dw-axi-dmac: use sg_nents_for_dma() helper
dmaengine: bcm2835-dma: use sg_nents_for_dma() helper
dmaengine: axi-dmac: use sg_nents_for_dma() helper
dmaengine: altera-msgdma: use sg_nents_for_dma() helper
scatterlist: introduce sg_nents_for_dma() helper
dmaengine: idxd: Add Max SGL Size Support for DSA3.0
dmaengine: idxd: Expose DSA3.0 capabilities through sysfs
dmaengine: sh: rz-dmac: Make channel irq local
dmaengine: pl08x: Fix comment stating the difference between PL080 and PL081
...
Pull soundwire updates from Vinod Koul:
- support for Qualcomm v2.2.0 controllers
- bus method updates for .probe(), .remove() and .shutdown()
and remove function return value updates
- Avell B.ON dmi-quirks mapping
- mark cs42l45 codec as wake capable
* tag 'soundwire-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: add SND_HDA_CORE dependency
dt-bindings: soundwire: qcom: Add SoundWire v2.2.0 compatible
soundwire: Use bus methods for .probe(), .remove() and .shutdown()
soundwire: Make remove function return no value
soundwire: dmi-quirks: add mapping for Avell B.ON (OEM rebranded of NUC15)
soundwire: qcom: Use guard to avoid mixing cleanup and goto
soundwire: intel_auxdevice: add cs42l45 codec to wake_capable_list
Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver updates for
7.0-rc1. Overall more lines were removed than added, thanks to
dropping the obsolete isp1362 USB host controller driver, always a
nice change.
Other than that, nothing major happening here, highlights are:
- lots of dwc3 driver updates and new hardware support added
- usb gadget function driver updates
- usb phy driver updates
- typec driver updates and additions
- USB rust binding updates for syntax and formatting changes
- more usb serial device ids added
- other smaller USB core and driver updates and additions
All of these have been in linux-next for a long time, with no reported
problems"
* tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (77 commits)
usb: typec: ucsi: Add Thunderbolt alternate mode support
usb: typec: hd3ss3220: Check if regulator needs to be switched
usb: phy: tegra: parametrize PORTSC1 register offset
usb: phy: tegra: parametrize HSIC PTS value
usb: phy: tegra: return error value from utmi_wait_register
usb: phy: tegra: cosmetic fixes
dt-bindings: usb: renesas,usbhs: Add RZ/G3E SoC support
usb: dwc2: fix resume failure if dr_mode is host
usb: cdns3: fix role switching during resume
usb: dwc3: gadget: Move vbus draw to workqueue context
USB: serial: option: add Telit FN920C04 RNDIS compositions
usb: dwc3: Log dwc3 address in traces
usb: gadget: tegra-xudc: Add handling for BLCG_COREPLL_PWRDN
usb: phy: tegra: add HSIC support
usb: phy: tegra: use phy type directly
usb: typec: ucsi: Enforce mode selection for cros_ec_ucsi
usb: typec: ucsi: Support mode selection to activate altmodes
usb: typec: Introduce mode_selection bit
usb: typec: Implement mode selection
usb: typec: Expose alternate mode priority via sysfs
...
Pull tty / serial driver updates from Greg KH:
"Here is the small amount of tty and serial driver updates for 7.0-rc1.
Nothing major in here at all, just some driver updates and minor
tweaks and cleanups including:
- sh-sci serial driver updates
- 8250 driver updates
- attempt to make the tty ports have their own workqueue, but was
reverted after testing found it to have problems on some platforms.
This will probably come back for 7.1 after it has been reworked and
resubmitted
- other tiny tty driver changes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (49 commits)
Revert "tty: tty_port: add workqueue to flip TTY buffer"
tty: tty_port: add workqueue to flip TTY buffer
serial: 8250_pci: Remove custom deprecated baud setting routine
serial: 8250_omap: Remove custom deprecated baud setting routine
dt-bindings: serial: renesas,scif: Document RZ/G3L SoC
serial: 8250: omap: set out-of-band wakeup if wakeup pinctrl exists
tty: hvc-iucv: Remove KMSG_COMPONENT macro
dt-bindings: serial: google,goldfish-tty: Convert to DT schema
dt-bindings: serial: sh-sci: Fold single-entry compatibles into enum
serial: 8250: 8250_omap.c: Clear DMA RX running status only after DMA termination is done
serial: 8250: 8250_omap.c: Add support for handling UART error conditions
serial: SH_SCI: improve "DMA support" prompt
serial: Kconfig: fix ordering of entries for menu display
serial: 8250: fix ordering of entries for menu display
serial: imx: change SERIAL_IMX_CONSOLE to bool
8250_men_mcb: drop unneeded MODULE_ALIAS
serial: men_z135_uart: drop unneeded MODULE_ALIAS
dt-bindings: serial: renesas,rsci: Document RZ/V2H(P) and RZ/V2N SoCs
serial: rsci: Convert to FIELD_MODIFY()
dt-bindings: serial: 8250: add SpacemiT K3 UART compatible
...
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystem changes for 7.0-rc1. Lots of little things in here,
including:
- Loads of iio driver changes and updates and additions
- gpib driver updates
- interconnect driver updates
- i3c driver updates
- hwtracing (coresight and intel) driver updates
- deletion of the obsolete mwave driver
- binder driver updates (rust and c versions)
- mhi driver updates (causing a merge conflict, see below)
- mei driver updates
- fsi driver updates
- eeprom driver updates
- lots of other small char and misc driver updates and cleanups
All of these have been in linux-next for a while, with no reported
issues"
* tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (297 commits)
mux: mmio: fix regmap leak on probe failure
rust_binder: return p from rust_binder_transaction_target_node()
drivers: android: binder: Update ARef imports from sync::aref
rust_binder: fix needless borrow in context.rs
iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin
iio: sca3000: Fix a resource leak in sca3000_probe()
iio: proximity: rfd77402: Add interrupt handling support
iio: proximity: rfd77402: Document device private data structure
iio: proximity: rfd77402: Use devm-managed mutex initialization
iio: proximity: rfd77402: Use kernel helper for result polling
iio: proximity: rfd77402: Align polling timeout with datasheet
iio: cros_ec: Allow enabling/disabling calibration mode
iio: frequency: ad9523: correct kernel-doc bad line warning
iio: buffer: buffer_impl.h: fix kernel-doc warnings
iio: gyro: itg3200: Fix unchecked return value in read_raw
MAINTAINERS: add entry for ADE9000 driver
iio: accel: sca3000: remove unused last_timestamp field
iio: accel: adxl372: remove unused int2_bitmask field
iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll()
iio: magnetometer: Remove IRQF_ONESHOT
...
Pull watchdog updates from Wim Van Sebroeck:
- iTCO: Drop vendor support
- s3c2410_wdt: Drop S3C2410 support
- Convert mpc8xxx-wdt to YAML
- Several small fixes and improvements
* tag 'linux-watchdog-6.20-rc1' of git://www.linux-watchdog.org/linux-watchdog:
dt-bindings: watchdog: qcom-wdt: Document Glymur watchdog
dt-bindings: watchdog: Convert mpc8xxx-wdt to YAML
dt-bindings: watchdog: samsung-wdt: Split if:then: and constrain more
dt-bindings: watchdog: samsung-wdt: Drop S3C2410
watchdog: s3c2410_wdt: Drop S3C2410 support
dt-bindings: watchdog: samsung-wdt: Define cluster constraints top-level
watchdog: rzv2h_wdt: Discard pm_runtime_put() return value
watchdog: rz: Discard pm_runtime_put() return values
watchdog: Make API functions const correct
watchdog: imx7ulp_wdt: handle the nowayout option
watchdog: sbsa: Update the W_IIDR Implementer bit mask to 0xFFF
watchdog: Always return time left until watchdog times out
watchdog: iTCO: Drop vendor support
watchdog: starfive-wdt: Fix PM reference leak in probe error path
fix it87_wdt early reboot by reporting running timer
Pull LED updates from Lee Jones:
"New Support & Features:
- Add support for the TI LP5812 4x3 matrix RGB LED driver, including
autonomous animation engine control and extensive scan multiplexing
modes
- Add a new driver for the ams Osram AS3668 4-channel I2C LED
controller
- Extend the is31fl32xx driver to support the is31fl3293 variant,
which features 3 channels and 12-bit PWM resolution
Improvements & Fixes:
- Prevent the ExpressWire KTD2801 chip from entering an undefined
state by disabling interrupts during time-sensitive communication
- Ensure the Qualcomm LPG driver detects hardware write failures by
checking the return value of regmap_bulk_write() during LUT
programming
- Fix kernel-doc warnings in the lm3692x driver by documenting
missing struct members and standardizing the comment style
- Update the ExpressWire library to use fsleep() and unexport
internal-only functions
- Improve the is31fl32xx driver by reordering code to eliminate
unnecessary forward declarations
Cleanups & Refactoring:
- Simplify the LP55XX common LED driver by utilizing the
for_each_available_child_of_node_scoped() macro for more concise
node iteration
Device Tree Bindings Updates:
- Add new YAML bindings for the TI LP5860 and LP5812 LED controllers,
and the ams Osram AS3668
- Convert the TI LM3697 white LED driver binding to DT schema format
- Allow multicolor LED nodes to be named with numeric suffixes (e.g.,
multi-led-0) to handle multiple instances without unit addresses
- Document support for the PMH0101 variant in the Qualcomm LPG PWM
and SPMI Flash LED bindings
- Add the issi,is31fl3293 compatible string to the is31fl32xx
binding"
* tag 'leds-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
dt-bindings: leds: Convert ti,lm3697 to DT schema
leds: as3668: Driver for the ams Osram 4-channel i2c LED driver
dt-bindings: leds: Add new as3668 support
docs: leds: Document TI LP5812 LED driver
leds: Add basic support for TI/National Semiconductor LP5812 LED Driver
leds: qcom-lpg: Check the return value of regmap_bulk_write()
dt-bindings: leds: qcom,spmi-flash-led: Add PMH0101 compatible
dt-bindings: leds: leds-qcom-lpg: Add support for PMH0101 PWM
dt-bindings: leds: Allow differently named multicolor LEDs
leds: lp55xx: Simplify with scoped for each OF child loop
dt-bindings: leds: add TI/National Semiconductor LP5812 LED Driver
leds: is31f132xx: Add support for is31fl3293
leds: is31f132xx: Re-order code to remove forward declarations
dt-bindings: leds: Add issi,is31fl3293 to leds-is31fl32xx
leds: expresswire: Fix chip state breakage
dt-bindings: leds: Add LP5860 LED controller
leds: lm3692x: Fix kernel-doc for struct lm3692x_led
Pull backlight updates from Lee Jones:
"New Support & Features:
- Add a new driver for the Congatec Board Controller (CGBC)
backlight, providing brightness control via the board controller's
PWM interface
Improvements & Fixes:
- Resolve build failures in the Awinic AW99706 driver by switching to
the correct GPIO consumer header
- Extend the Qualcomm WLED driver to support the specific
over-voltage protection (OVP) values required for the PMI8994 and
PMI8950 variants
Device Tree Bindings Updates:
- Document the device-specific over-voltage protection (OVP)
millivolt ranges and default values for Qualcomm PMI8994 and
PMI8950 WLED controllers"
* tag 'backlight-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: qcom-wled: Change PM8950 WLED configurations
dt-bindings: backlight: qcom-wled: Document ovp values for PMI8950
backlight: qcom-wled: Support ovp values for PMI8994
dt-bindings: backlight: qcom-wled: Document ovp values for PMI8994
backlight: aw99706: Fix build errors caused by wrong gpio header
backlight: Add Congatec Board Controller (CGBC) backlight support
Pull MFD updates from Lee Jones:
"New Support & Features:
- Add comprehensive support for the ROHM BD72720 PMIC, including core
MFD, regulator, GPIO, clock gate, RTC, and power-supply drivers
- Add support for the Rockchip RK801 PMIC, including core MFD and
regulator drivers
- Add support for the ROHM BD73900 PMIC by leveraging existing common
drivers
- Wire up RTC, hwmon, and input sub-devices for the Apple SMC
(macsmc) driver
- Add support for the Delta Networks TN48M switch CPLD via the
simple-mfd-i2c driver
- Add support for the TS133 variant to the QNAP MCU driver
- Provide support for the sama7d65 XLCD controller in the Atmel HLCDC
driver
- Add backlight sub-device support to the Congatec Board Controller
(cgbc)
- Add Intel Nova Lake-S (NVL-S) PCI IDs to the Intel LPSS driver
Improvements & Fixes:
- Implement a "wrapper regmap" for the ROHM BD72720 to handle dual
I2C slave addresses (0x4b and 0x4c) transparently for child devices
- Introduce mutex locking around 'mfd_of_node_list' in the MFD core
to ensure safe concurrent access
- Fix a potential regulator resource leak in the Arizona core driver
during boot sequence failures
- Resolve child device duplication issues on driver rebind for
Qualcomm PM8xxx and OMAP USB host drivers by using
of_platform_depopulate()
- Fix IRQ domain name duplication for the Samsung S2MPG10 by adding a
unique domain suffix
- Implement LOCK register handling for the TI TPS65214 variant to
unlock registers at probe time
- Fully convert the Loongson-2K BMC driver to use managed resources
(pcim) and the standard PCI resource API
- Ensure the Apple SMC mutex is correctly initialized during probe to
prevent NULL pointer dereferences
- Expand the ROHM BD71828 power-supply driver to support 9-bit
register addresses
- Simplify the Samsung S5M RTC driver by querying platform device IRQ
resources directly
- Revert an incorrect read-to-write mask change in the DA9052 SPI
driver to restore default OTP behavior
- Fix kernel-doc warnings in the TI TPS6105x driver
- Cleanups & Refactoring
- Simplify the MFD core by utilizing the scoped
for_each_child_of_node_scoped() macro and streamlining device_node
storage
- Rename ROHM BD71828 IC-specific entities to use consistent prefixes
for better extensibility
- Refactor ROHM BD71828 regmap definitions using the
regmap_reg_range() macro
- Update the ROHM BD71828 driver to use standard C-style comment
headers
- Remove the now unused 'irq_data' field from the Samsung SEC core
structure
- Drop unnecessary use of irqd_get_trigger_type() in the Maxim
MAX77759 driver
- Default MFD_SPACEMIT_P1 to 'm' if ARCH_SPACEMIT is selected
- Add missing charger-related registers to the ROHM BD71828 core
header and Type-C CC registers to the AXP717
Device Tree Binding Updates:
- Add new bindings for the ROHM BD72720 PMIC, Rockchip RK801 PMIC,
Bitmain BM1880 System Controller, and NXP LPC32xx System Control
Block
- Clarify trickle-charge terminology and add properties for voltage
drop (VDR) correction and upper charge limits to the generic
battery binding
- Document GPR syscon for NXP S32 SoCs and the smp-memram subnode for
Aspeed SCU
- Document numerous new Qualcomm SPMI PMIC compatibles (pmcx0102,
pmh0101, pmk8850, etc)
- Add compatibles for the sama7d65 XLCD (Atmel), LAN9691 Flexcom
(Microchip), and various MediaTek SCPSYS and regulator components
- Fix a dead link to the audio codec binding in the DA9055
documentation"
* tag 'mfd-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (41 commits)
dt-bindings: mfd: da9055: Fix dead link to codec binding
mfd: cgbc: Add support for backlight
dt-bindings: mfd: qcom,spmi-pmic: Document PMICs present on Glymur and Kaanapali
dt-bindings: mfd: Document smp-memram subnode for aspeed,ast2x00-scu
mfd: intel-lpss: Add Intel Nova Lake-S PCI IDs
mfd: ls2kbmc: Use PCI API instead of direct accesses
mfd: ls2kbmc: Fully convert to use managed resources
dt-bindings: mfd: mediatek: mt6397: Add missing MT6331 regulator compat
dt-bindings: mfd: mediatek,mt8195-scpsys: Add mediatek,mt6795-scpsys
dt-bindings: mfd: atmel,sama5d2-flexcom: Add microchip,lan9691-flexcom
mfd: omap-usb-host: Fix OF populate on driver rebind
mfd: qcom-pm8xxx: Fix OF populate on driver rebind
dt-bindings: mfd: syscon: Allow syscon compatible for mediatek,mt7981-topmisc
mfd: qnap-mcu: Add driver data for TS133 variant
dt-bindings: mfd: qnap,ts433-mcu: Add qnap,ts133-mcu compatible
mfd: sec: Fix IRQ domain names duplication
mfd: simple-mfd-i2c: Add Delta TN48M CPLD support
mfd: macsmc: Initialize mutex
dt-bindings: mfd: nxp: Add NXP LPC32xx System Control Block
mfd: Kconfig: Default MFD_SPACEMIT_P1 to 'm' if ARCH_SPACEMIT
...
Pull i2c updates from Wolfram Sang:
- core: cleaner fwnode usage
- tegra: timing improvements and Tegra264 support
- lpi2c: fix SMBus block read NACK after byte count
- amd-mp2, designware, mlxbf, rtl9300, spacemit, tegra: cleanups
- designware:
- use a dedicated algorithm for AMD Navi
- replace magic numbers with named constants
- replace min_t() with min() to avoid u8 truncation
- refactor core to enable mode switching
- imx-lpi2c: add runtime PM support for IRQ and clock handling
- lan9691-i2c: add new driver
- rtl9300: use OF helpers directly and avoid fwnode handling
- spacemit: add bus reset support
- units: add HZ_PER_GHZ and use it in several i2c drivers
- at24 i2c eeprom:
- add a set of new compatibles to DT bindings
- use dev_err_probe() consistently in the driver
* tag 'i2c-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (46 commits)
i2c: imx-lpi2c: fix SMBus block read NACK after byte count
i2c: designware: Remove an unnecessary condition
i2c: designware: Enable mode swapping
i2c: designware: Combine the init functions
i2c: designware: Combine some of the common functions
i2c: designware: Use device_is_compatible() instead of custom approach
dt-bindings: eeprom: at24: Add compatible for Puya P24C128F
drivers/i2c/busses: use min() instead of min_t()
i2c: imx-lpi2c: Add runtime PM support for IRQ and clock management on i.MX8QXP/8QM
i2c: amd-mp2: clean up amd_mp2_find_device()
i2c: designware: Replace magic numbers with named constants
i2c: rtl9300: use of instead of fwnode
i2c: rtl9300: remove const cast
i2c: tegra: remove unused rst
i2c: designware: Remove not-going-to-be-supported code for Baikal SoC
i2c: spacemit: drop useless spaces
i2c: mlxbf: Use HZ_PER_KHZ in the driver
i2c: mlxbf: Remove unused bus speed definitions
i2c: core: Use dev_fwnode()
i2c: core: Replace custom implementation of device_match_fwnode()
...
Pull input updates from Dmitry Torokhov:
- support for FocalTech FT8112 added to i2c-hid driver
- support for FocalTech FT3518 added to edt-ft5x06 driver
- support for power buttons in TWL603x chips added to twl4030-pwrbutton
driver
- an update to gpio-decoder driver to make it usable on non-OF
platforms and to clean up the code
- an update to synaptics_i2c driver switching it to use managed
resources and a fix to restarting polling after resume
- an update to gpio-keys driver to fall back to getting IRQ from
resources if not specified using other means
- an update to ili210x driver to support polling mode
- a number of input drivers switched to scnprintf() to suppress
truncation warnings
- a number of updates and conversions of device tree bindings to yaml
format
- fixes to spelling in comments and messages in several drivers
- other assorted fixups
* tag 'input-for-v7.0-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
dt-bindings: input: qcom,pm8941-pwrkey: Document PMM8654AU
dt-bindings: input: touchscreen: imagis: allow linux,keycodes for ist3038
Input: apbps2 - fix comment style and typos
Input: gpio_keys - fall back to platform_get_irq() for interrupt-only keys
Input: novatek-nvt-ts - drop wake_type check
dt-bindings: input: touchscreen: tsc2007: document '#io-channel-cells'
Input: ili210x - add support for polling mode
dt-bindings: touchscreen: trivial-touch: Drop 'interrupts' requirement for old Ilitek
Input: appletouch - fix potential race between resume and open
HID: i2c-hid: Add FocalTech FT8112
dt-bindings: input: i2c-hid: Introduce FocalTech FT8112
Input: synaptics_i2c - switch to using managed resources
Input: synaptics_i2c - guard polling restart in resume
Input: gpio_decoder - don't use "proxy" headers
Input: gpio_decoder - make use of the macros from bits.h
Input: gpio_decoder - replace custom loop by gpiod_get_array_value_cansleep()
Input: gpio_decoder - unify messages with help of dev_err_probe()
Input: gpio_decoder - make use of device properties
Input: serio - complete sizeof(*pointer) conversions
Input: wdt87xx_i2c - switch to use dev_err_probe()
...
Pull clk updates from Stephen Boyd:
"Not much changed in the clk framework this time except the clk.h
consumer API moved the context saving APIs around to fix a build error
in certain configurations.
There was a change to the core framework for CLK_OPS_PARENT_ENABLE
behavior during registration, but it wrecked existing drivers that
didn't expect things to be turned off during clk registration so it
got reverted.
This cycle is really a large collection of new clk drivers, primarily
for Qualcomm SoCs but also for Amlogic, SpacemiT, Google, and Aspeed.
Another big change in here is support for automatic hardware clock
gating on Samsung SoCs where the clks turn on and off when needed.
Ideally more vendors move to this method for better power savings. The
highlights are in the updates section below.
Beyond all the new drivers we have a bunch of cleanups like converting
drivers from divider_round_rate() to divider_determine_rate() and
using scoped for each OF child loops. Otherwise it's the usual data
fixes and plugging reference leaks, etc. that's all pretty ordinary
but not critical enough to fix until the next release.
New Drivers:
- Qualcomm Kaanapali global, tcsr, rpmh, display, gpu, camera, and
video clk controllers
- Qualcomm SM8750 camera clk controllers
- Qualcomm MSM8940 and SDM439 global clk controllers
- Google GS101 Display Process Unit (DPU) clk controllers
- SpacemiT K3 clk controllers
- Amlogic t7 clk controllers
- Aspeed AST2700 clk controllers
Updates:
- Convert clock dividers from round_rate() to determine_rate()
- Fix sparse warnings, kernel-doc warnings, and plug leaked OF refs
- Automatic hardware clk gating on Google GS101 SoCs
- Amlogic s4 video clks
- CAN-FD clks and resets on Renesas RZ/T2H, RZ/N2H, RZ/V2H, and
RZ/V2N
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/T21H and RZ/N2H
- DMAC, interrupt controller (ICU), SPI, and thermal (TSU) clocks and
resets on Renesas RZ/V2N
- More serial (RSCI) clocks and resets on Renesas RZ/V2H and RZ/V2N
- CPU frequency scaling on T-HEAD TH1520"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (165 commits)
clk: aspeed: Add reset for HACE/VIDEO
dt-bindings: clock: aspeed: Add VIDEO reset definition
clk: aspeed: add AST2700 clock driver
MAINTAINERS: Add entry for ASPEED clock drivers.
clk: aspeed: Move the existing ASPEED clk drivers into aspeed subdirectory.
Revert "clk: Respect CLK_OPS_PARENT_ENABLE during recalc"
clk: Disable KUNIT_UML_PCI
dt-bindings: clk: rs9: Fix DIF pattern match
clk: rs9: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
clk: rs9: Reserve 8 struct clk_hw slots for for 9FGV0841
clk: qcom: sm8750: Constify 'qcom_cc_desc' in SM8750 camcc
clk: zynqmp: pll: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: zynqmp: divider: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: mediatek: Fix error handling in runtime PM setup
clk: mediatek: don't select clk-mt8192 for all ARM64 builds
clk: mediatek: Add mfg_eb as parent to mt8196 mfgpll clocks
clk: mediatek: Refactor pllfh registration to pass device
clk: mediatek: Pass device to clk_hw_register for PLLs
clk: mediatek: Refactor pll registration to pass device
clk: Respect CLK_OPS_PARENT_ENABLE during recalc
...
Pull remoteproc updates from Bjorn Andersson:
- Fix a memory remapping issue and make a few life-cycle improvements
in the i.MX HiFi remoteproc driver
- Add support the System Manager CPU and LMM APIs and use this to
support i.MX95
- Rework the handling of the Mediatek SCP clock to avoid a potential
circular deadlock in the clock providers
- Refactor the Qualcomm secure-world helpers and add support in the
Qualcomm PAS remoteproc driver for reading a resource-table from
secure world. Use this to configure the IOMMU on newer targets where
Linux runs in EL2
* tag 'rproc-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: imx_rproc: Fix invalid loaded resource table detection
remoteproc: mediatek: Break lock dependency to `prepare_lock`
remoteproc: imx_rproc: Add support for i.MX95
remoteproc: imx_rproc: Add support for System Manager CPU API
remoteproc: imx_rproc: Add support for System Manager LMM API
remoteproc: imx_rproc: Introduce prepare ops for imx_rproc_dcfg
remoteproc: imx_rproc: Add runtime ops copy to support dynamic behavior
dt-bindings: remoteproc: fsl,imx-rproc: Add support for i.MX95
dt-bindings: remoteproc: Add HSM M4F core on TI K3 SoCs
remoteproc: xlnx_r5: Simplify with scoped for each OF child loop
remoteproc: mtk_scp: Simplify with scoped for each OF child loop
remoteproc: imx_dsp_rproc: Only reset carveout memory at RPROC_OFFLINE state
dt-bindings: remoteproc: qcom,sm8550-pas: Drop SM8750 ADSP from if-branch
dt-bindings: remoteproc: qcom,adsp: Allow cx-supply on qcom,sdm845-slpi-pas
remoteproc: imx_dsp_rproc: Fix multiple start/stop operations
remoteproc: imx_rproc: Use strstarts for "rsc-table" check
remoteproc: imx_dsp_rproc: Wait for suspend ACK only if WAIT_FW_CONFIRMATION is set
remoteproc: imx_dsp_rproc: Rename macro to reflect multiple contexts
remoteproc: imx_dsp_rproc: Skip RP_MBOX_SUSPEND_SYSTEM when mailbox TX channel is uninitialized
dt-bindings: remoteproc: Fix dead link to Keystone DSP GPIO binding
Pull mailbox updates from Jassi Brar:
"Platform and core updates
PCC:
- Updates to transmission and interrupt handling, including dynamic
txdone configuration, ->last_tx_done() wiring, and SHMEM
initialization fixes. Reverted previous shared buffer patch
MediaTek
- Introduce mtk-vcp-mailbox driver and bindings for MT8196 VCP
- Expand mtk-cmdq for MT8196 with GCE virtualization, mminfra_offset,
and instruction generation data
Spreadtrum (SPRD)
- Add Mailbox Revision 2 support and UMS9230 bindings
- Fix unhandled interrupt masking and TX done delivery flags
Microchip
- Add pic64gx compatibility to MPFS
- Fix out-of-bounds access and smatch warnings in mchp-ipc-sbi
Core & Misc Platform Updates
- Prevent out-of-bounds access in fw_mbox_index_xlate()
- Add bindings for Qualcomm CPUCP (Kaanapali)
- Simplify mtk-cmdq and zynqmp-ipi with scoped OF child iterators
- Consolidate various minor fixes, dead code removal, and typo
corrections across Broadcom, NXP, Samsung, Xilinx, ARM, and core
headers"
* tag 'mailbox-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (34 commits)
mailbox: sprd: mask interrupts that are not handled
mailbox: sprd: add support for mailbox revision 2
mailbox: sprd: clear delivery flag before handling TX done
dt-bindings: mailbox: sprd: add compatible for UMS9230
mailbox: bcm-ferxrm-mailbox: Use default primary handler
mailbox: Remove mailbox_client.h from controller drivers
mailbox: zynqmp-ipi: Simplify with scoped for each OF child loop
mailbox: mtk-cmdq: Simplify with scoped for each OF child loop
dt-bindings: mailbox: xlnx,zynqmp-ipi-mailbox: Document msg region requirement
mailbox: Improve RISCV_SBI_MPXY_MBOX guidance
mailbox: mchp-ipc-sbi: fix uninitialized symbol and other smatch warnings
mailbox: arm_mhuv3: fix typo in comment
mailbox: cix: fix typo in error message
mailbox: imx: Skip the suspend flag for i.MX7ULP
mailbox: exynos: drop unneeded runtime pointer (pclk)
mailbox: pcc: Remove spurious IRQF_ONESHOT usage
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
mailbox: mtk-cmdq: Add GCE hardware virtualization configuration
mailbox: mtk-cmdq: Add cmdq private data to cmdq_pkt for generating instruction
...
* clk-imx:
clk: imx: fracn-gppll: Add 241.90 MHz Support
clk: imx: fracn-gppll: Add 332.60 MHz Support
* clk-divider:
rtc: ac100: convert from divider_round_rate() to divider_determine_rate()
clk: zynqmp: divider: convert from divider_round_rate() to divider_determine_rate()
clk: x86: cgu: convert from divider_round_rate() to divider_determine_rate()
clk: versaclock3: convert from divider_round_rate() to divider_determine_rate()
clk: stm32: stm32-core: convert from divider_round_rate_parent() to divider_determine_rate()
clk: stm32: stm32-core: convert from divider_ro_round_rate() to divider_ro_determine_rate()
clk: sprd: div: convert from divider_round_rate() to divider_determine_rate()
clk: sophgo: sg2042-clkgen: convert from divider_round_rate() to divider_determine_rate()
clk: nxp: lpc32xx: convert from divider_round_rate() to divider_determine_rate()
clk: nuvoton: ma35d1-divider: convert from divider_round_rate() to divider_determine_rate()
clk: milbeaut: convert from divider_round_rate() to divider_determine_rate()
clk: milbeaut: convert from divider_ro_round_rate() to divider_ro_determine_rate()
clk: loongson1: convert from divider_round_rate() to divider_determine_rate()
clk: hisilicon: clkdivider-hi6220: convert from divider_round_rate() to divider_determine_rate()
clk: bm1880: convert from divider_round_rate() to divider_determine_rate()
clk: bm1880: convert from divider_ro_round_rate() to divider_ro_determine_rate()
clk: actions: owl-divider: convert from divider_round_rate() to divider_determine_rate()
clk: actions: owl-composite: convert from owl_divider_helper_round_rate() to divider_determine_rate()
clk: sunxi-ng: convert from divider_round_rate_parent() to divider_determine_rate()
clk: sophgo: cv18xx-ip: convert from divider_round_rate() to divider_determine_rate()
* clk-rockchip:
clk: rockchip: Fix error pointer check after rockchip_clk_register_gate_link()
* clk-microchip:
dt-bindings: clock: mpfs-clkcfg: Add pic64gx compatibility
dt-bindings: clock: mpfs-ccc: Add pic64gx compatibility
clk: microchip: drop POLARFIRE from ARCH_MICROCHIP_POLARFIRE
clk: microchip: core: remove unused include asm/traps.h
clk: microchip: core: correct return value on *_get_parent()
clk: microchip: core: remove duplicate determine_rate on pic32_sclk_ops
Pull MTD updates from Miquel Raynal:
"MTD:
- prioritize ofpart in physmap-core probing
- conversions to scoped for each OF child loops
Bindings:
- The bulk of the changes consists of binding fixes/updates to
restrict the use of undefined properties, which was mostly
ineffective in the current form because of the nesting of partition
nodes and the lack of compatible strings
- YAML conversions and the addition of a dma-coherent property in the
cdns,hp-nfc driver
SPI NAND:
- support for octal DTR modes (8D-8D-8D)
- support for Foresee F35SQB002G chips
And small misc fixes"
* tag 'mtd/for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (65 commits)
mtd: spi-nor: hisi-sfc: fix refcounting bug in hisi_spi_nor_register_all()
mtd: spinand: fix NULL pointer dereference in spinand_support_vendor_ops()
mtd: rawnand: pl353: Add message about ECC mode
mtd: rawnand: pl353: Fix software ECC support
mtd: spinand: winbond: Remove unneeded semicolon
dt-bindings: mtd: cdns,hp-nfc: Add dma-coherent property
mtd: spinand: Disable continuous read during probe
mtd: spinand: add Foresee F35SQB002G flash support
mtd: spinand: winbond: W35N octal DTR support
mtd: spinand: Add octal DTR support
mtd: spinand: Warn if using SSDR-only vendor commands in a non SSDR mode
mtd: spinand: Give the bus interface to the configuration helper
mtd: spinand: Propagate the bus interface across core helpers
mtd: spinand: Add support for setting a bus interface
mtd: spinand: Gather all the bus interface steps in one single function
mtd: spinand: winbond: Configure the IO mode after the dummy cycles
mtd: spinand: winbond: Rename IO_MODE register macro
mtd: spinand: winbond: Fix style
mtd: spinand: winbond: Register W35N vendor specific operation
mtd: spinand: winbond: Register W25N vendor specific operation
...
SPI NAND
- The major feature this release is the support for octal DTR
modes (8D-8D-8D).
- There has been as well a series of conversion to scoped for each OF
child loops.
- Support for Foresee F35SQB002G chips has been added.
Other changes are small fixes.
Pull RISC-V updates from Paul Walmsley:
- Add support for control flow integrity for userspace processes.
This is based on the standard RISC-V ISA extensions Zicfiss and
Zicfilp
- Improve ptrace behavior regarding vector registers, and add some
selftests
- Optimize our strlen() assembly
- Enable the ISO-8859-1 code page as built-in, similar to ARM64, for
EFI volume mounting
- Clean up some code slightly, including defining copy_user_page() as
copy_page() rather than memcpy(), aligning us with other
architectures; and using max3() to slightly simplify an expression
in riscv_iommu_init_check()
* tag 'riscv-for-linus-7.0-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
riscv: lib: optimize strlen loop efficiency
selftests: riscv: vstate_exec_nolibc: Use the regular prctl() function
selftests: riscv: verify ptrace accepts valid vector csr values
selftests: riscv: verify ptrace rejects invalid vector csr inputs
selftests: riscv: verify syscalls discard vector context
selftests: riscv: verify initial vector state with ptrace
selftests: riscv: test ptrace vector interface
riscv: ptrace: validate input vector csr registers
riscv: csr: define vtype register elements
riscv: vector: init vector context with proper vlenb
riscv: ptrace: return ENODATA for inactive vector extension
kselftest/riscv: add kselftest for user mode CFI
riscv: add documentation for shadow stack
riscv: add documentation for landing pad / indirect branch tracking
riscv: create a Kconfig fragment for shadow stack and landing pad support
arch/riscv: add dual vdso creation logic and select vdso based on hw
arch/riscv: compile vdso with landing pad and shadow stack note
riscv: enable kernel access to shadow stack memory via the FWFT SBI call
riscv: add kernel command line option to opt out of user CFI
riscv/hwprobe: add zicfilp / zicfiss enumeration in hwprobe
...
Pull ATA updates from Damien Le Moal:
- Cleanup IRQ masking in the handling of completed report zones
commands (Niklas)
- Improve the handling of Thunderbolt attached devices to speed up
device removal (Henry)
- Several patches to generalize the existing max_sec quirks to
facilitates quirking the maximum command size of buggy drives, many
of which have recently showed up with the recent increase of the
default max_sectors block limit (Niklas)
- Cleanup the ahci-platform and sata dt-bindings schema (Rob,
Manivannan)
- Improve device node scan in the ahci-dwc driver (Krzysztof)
- Remove clang W=1 warnings with the ahci-imx and ahci-xgene drivers
(Krzysztof)
- Fix a long standing potential command starvation situation with
non-NCQ commands issued when NCQ commands are on-going (me)
- Limit max_sectors to 8191 on the INTEL SSDSC2KG480G8 SSD (Niklas)
- Remove Vesa Local Bus (VLB) support in the pata_legacy driver (Ethan)
- Simple fixes in the pata_cypress (typo) and pata_ftide010 (timing)
drivers (Ethan, Linus W)
* tag 'ata-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: pata_ftide010: Fix some DMA timings
ata: pata_cypress: fix typo in error message
ata: pata_legacy: remove VLB support
ata: libata-core: Quirk INTEL SSDSC2KG480G8 max_sectors
dt-bindings: ata: sata: Document the graph port
ata: libata-scsi: avoid Non-NCQ command starvation
ata: libata-scsi: refactor ata_scsi_translate()
ata: ahci-xgene: Fix Wvoid-pointer-to-enum-cast warning
ata: ahci-imx: Fix Wvoid-pointer-to-enum-cast warning
ata: ahci-dwc: Simplify with scoped for each OF child loop
dt-bindings: ata: ahci-platform: Drop unnecessary select schema
ata: libata: Allow more quirks
ata: libata: Add libata.force parameter max_sec
ata: libata: Add support to parse equal sign in libata.force
ata: libata: Change libata.force to use the generic ATA_QUIRK_MAX_SEC quirk
ata: libata: Add ata_force_get_fe_for_dev() helper
ata: libata: Add ATA_QUIRK_MAX_SEC and convert all device quirks
ata: libata: avoid long timeouts on hot-unplugged SATA DAS
ata: libata-scsi: Remove superfluous local_irq_save()
Pull SCSI updates from James Bottomley:
"Usual driver updates (qla2xxx, mpi3mr, mpt3sas, ufs) plus assorted
cleanups and fixes.
The biggest core change is the massive code motion in the sd driver to
remove forward declarations and the most significant change is to
enumify the queuecommand return"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (78 commits)
scsi: csiostor: Fix dereference of null pointer rn
scsi: buslogic: Reduce stack usage
scsi: ufs: host: mediatek: Require CONFIG_PM
scsi: ufs: mediatek: Fix page faults in ufs_mtk_clk_scale() trace event
scsi: smartpqi: Fix memory leak in pqi_report_phys_luns()
scsi: mpi3mr: Make driver probing asynchronous
scsi: ufs: core: Flush exception handling work when RPM level is zero
scsi: efct: Use IRQF_ONESHOT and default primary handler
scsi: ufs: core: Use a host-wide tagset in SDB mode
scsi: qla2xxx: target: Add WQ_PERCPU to alloc_workqueue() users
scsi: qla2xxx: Add WQ_PERCPU to alloc_workqueue() users
scsi: qla4xxx: Add WQ_PERCPU to alloc_workqueue() users
scsi: mpi3mr: Driver version update to 8.17.0.3.50
scsi: mpi3mr: Fixed the W=1 compilation warning
scsi: mpi3mr: Record and report controller firmware faults
scsi: mpi3mr: Update MPI Headers to revision 39
scsi: mpi3mr: Use negotiated link rate from DevicePage0
scsi: mpi3mr: Avoid redundant diag-fault resets
scsi: mpi3mr: Rename log data save helper to reflect threaded/BH context
scsi: mpi3mr: Add module parameter to control threaded IRQ polling
...
Pull networking updates from Paolo Abeni:
"Core & protocols:
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls
for small helper and stack canary overhead in the fast-path.
This generates better and faster code with very small or no text
size increases, as in many cases the call generated more code than
the actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage
by up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the
RX path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without
the HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified,
aligning IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the
rate shaper of sch_cake across multiple CPUs, while still enforcing
a single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations
that are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information,
saving cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most
protocols, avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies
between the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes
back online.
Driver API:
- Support for switching the working mode (automatic vs manual) of a
DPLL device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties,
to generalize polarity inversion requirements for differential
signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers:
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram
and NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the
used H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO,
leading to 12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new
layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN
metadata access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support multi-wiphy
devices and and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature"
* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
bnge/bng_re: Add a new HSI
net: macb: Fix tx/rx malfunction after phy link down and up
af_unix: Fix memleak of newsk in unix_stream_connect().
net: ti: icssg-prueth: Add optional dependency on HSR
net: dsa: add basic initial driver for MxL862xx switches
net: mdio: add unlocked mdiodev C45 bus accessors
net: dsa: add tag format for MxL862xx switches
dt-bindings: net: dsa: add MaxLinear MxL862xx
selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
octeontx2-pf: Unregister devlink on probe failure
net: renesas: rswitch: fix forwarding offload statemachine
ionic: Rate limit unknown xcvr type messages
tcp: inet6_csk_xmit() optimization
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
ipv6: use np->final in inet6_sk_rebuild_header()
ipv6: add daddr/final storage in struct ipv6_pinfo
net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
...
