The last resume result exposing logic in cros_ec_sleep_event()
incorrectly requires S0ix support, which doesn't work on ARM based
systems where S0ix doesn't exist. That's because cros_ec_sleep_event()
only reports the last resume result when the EC indicates the last sleep
event was an S0ix resume. On ARM systems, the last sleep event is always
S3 resume, but the EC can still detect sleep hang events in case some
other part of the AP is blocking sleep.
Always expose the last resume result if the EC supports it so that this
works on all devices regardless of S0ix support. This fixes sleep hang
detection on ARM based chromebooks like Trogdor.
Cc: Rajat Jain <rajatja@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Fixes: 7235560ac7 ("platform/chrome: Add support for v1 of host sleep event")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220614075726.2729987-1-swboyd@chromium.org
cros_ec_get_host_event_wake_mask() expects to receive
sizeof(struct ec_response_host_event_mask) from send_command(). The
payload is valid only if the return value is positive.
Return -EPROTO if send_command() returns 0 in
cros_ec_get_host_event_wake_mask().
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-22-tzungbi@kernel.org
cros_ec_get_host_event_wake_mask() expects to receive
sizeof(struct ec_response_host_event_mask) from send_command().
The payload is valid only if the return value is positive.
Add Kunit tests for returning 0 from send_command() in
cros_ec_get_host_event_wake_mask().
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-21-tzungbi@kernel.org
cros_ec_get_host_event_wake_mask() used to return value from
send_command() which is number of bytes for input payload on success
(i.e. sizeof(struct ec_response_host_event_mask)).
However, the callers don't need to know how many bytes are available.
Don't return number of available bytes. Instead, return 0 on success;
otherwise, negative integers on error.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-20-tzungbi@kernel.org
cros_ec_get_host_command_version_mask() expects to receive
sizeof(struct ec_response_get_cmd_versions) from send_command(). The
payload is valid only if the return value is positive.
Return -EPROTO if send_command() returns 0 in
cros_ec_get_host_command_version_mask().
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-19-tzungbi@kernel.org
cros_ec_get_host_command_version_mask() expects to receive
sizeof(struct ec_response_get_cmd_versions) from send_command().
The payload is valid only if the return value is positive.
Add Kunit tests for returning 0 from send_command() in
cros_ec_get_host_command_version_mask().
Note that because the 2 cros_ec_get_host_command_version_mask() use the
same `ver_mask`. cros_ec_proto_test_query_all_no_host_sleep_return0()
polluates the `ver_mask` and returns 0 on the second send_command() to
make sure the second cros_ec_get_host_command_version_mask() doesn't
take the garbage from the previous call.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-18-tzungbi@kernel.org
cros_ec_query_all() uses cros_ec_get_host_command_version_mask() to
query the supported MKBP version; cros_ec_get_host_command_version_mask()
uses send_command() for transferring the host command.
Returning >=0 from send_command() only denotes the transfer was success.
cros_ec_get_host_command_version_mask() should check if EC wasn't happy
by checking `msg->result`.
Add a Kunit test for returning error in `msg->result` in
cros_ec_get_host_command_version_mask(). For the case,
cros_ec_query_all() should find the EC device doesn't support MKBP.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-16-tzungbi@kernel.org
cros_ec_get_host_command_version_mask() used to return value from
send_command() which is number of available bytes for input payload on
success (i.e. sizeof(struct ec_response_get_cmd_versions)).
However, the callers don't need to know how many bytes are available.
Don't return number of available bytes. Instead, return 0 on success;
otherwise, negative integers on error.
Also remove the unneeded `ver_mask` initialization as the callers should
take it only if cros_ec_get_host_command_version_mask() returns 0.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-15-tzungbi@kernel.org
cros_ec_get_proto_info_legacy() expects to receive
sizeof(struct ec_response_hello) from send_command(). The payload is
valid only if the return value is positive.
Add a Kunit test for returning 0 from send_command() in
cros_ec_get_proto_info_legacy().
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-12-tzungbi@kernel.org
cros_ec_get_proto_info() expects to receive
sizeof(struct ec_response_get_protocol_info) from send_command(). The
payload is valid only if the return value is positive.
Add Kunit tests for returning 0 from send_command() in
cros_ec_get_proto_info().
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-9-tzungbi@kernel.org
Rename cros_ec_host_command_proto_query() to cros_ec_get_proto_info()
and make it responsible for setting `ec_dev` fields according to the
response protocol info.
Also make cros_ec_get_host_event_wake_mask() allocate its own message
buffer. It was lucky that size of `struct ec_response_host_event_mask`
is less than `struct ec_response_get_protocol_info`. Thus, the buffer
wasn't overflow.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-8-tzungbi@kernel.org
Use cros_ec_map_error() in cros_ec_get_host_event_wake_mask().
The behavior of cros_ec_get_host_event_wake_mask() slightly changed. It
is acceptable because the caller only needs it returns negative integers
for indicating errors. Especially, the EC_RES_INVALID_COMMAND still
maps to -EOPNOTSUPP.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-7-tzungbi@kernel.org
cros_ec_prepare_tx() mixed the code for both versions. To be neat and to
make it clear, factor the legacy part out as a separate function, rename
the function, and update the comments.
Specifically,
- prepare_tx(), for current protocol version (i.e. 3).
- prepare_tx_legacy(), for protocol version <= 2.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220518091814.2028579-3-tzungbi@kernel.org
Pull MIPS updates from Thomas Bogendoerfer:
"Cleanups and fixes"
* tag 'mips_5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (38 commits)
MIPS: RALINK: Define pci_remap_iospace under CONFIG_PCI_DRIVERS_GENERIC
MIPS: Use memblock_add_node() in early_parse_mem() under CONFIG_NUMA
MIPS: Return -EINVAL if mem parameter is empty in early_parse_mem()
MIPS: Kconfig: Fix indentation and add endif comment
MIPS: bmips: Fix compiler warning observed on W=1 build
MIPS: Rewrite `csum_tcpudp_nofold' in plain C
mips: setup: use strscpy to replace strlcpy
MIPS: Octeon: add SNIC10E board
MIPS: Ingenic: Refresh defconfig for CU1000-Neo and CU1830-Neo.
MIPS: Ingenic: Refresh device tree for Ingenic SoCs and boards.
MIPS: Ingenic: Add PWM nodes for X1830.
MIPS: Octeon: fix typo in comment
MIPS: loongson32: Kconfig: Remove extra space
MIPS: Sibyte: remove unnecessary return variable
MIPS: Use NOKPROBE_SYMBOL() instead of __kprobes annotation
selftests/ftrace: Save kprobe_events to test log
MIPS: tools: no need to initialise statics to 0
MIPS: Loongson: Use hwmon_device_register_with_groups() to register hwmon
MIPS: VR41xx: Drop redundant spinlock initialization
MIPS: smp: optimization for flush_tlb_mm when exiting
...
Pull chrome platform updates from Tzung-Bi Shih:
"cros_ec:
- Fix wrong error handling path
- Clean-up patches
cros_ec_chardev:
- Re-introduce cros_ec_cmd_xfer to fix ABI broken
cros_ec_lpcs:
- Support the Framework Laptop
cros_ec_typec:
- Fix NULL dereference
chromeos_acpi:
- Add ChromeOS ACPI device driver
- Fix Sphinx errors when `make htmldocs`
misc:
- Drop BUG_ON()s"
* tag 'tag-chrome-platform-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: Use imperative mood for ChromeOS ACPI sysfs ABI descriptions
platform/chrome: Use tables for values lists of ChromeOS ACPI sysfs ABI
platform/chrome: cros_ec_spi: drop BUG_ON() if `din` isn't large enough
platform/chrome: cros_ec_spi: drop unneeded BUG_ON()
platform/chrome: cros_ec_i2c: drop BUG_ON() in cros_ec_pkt_xfer_i2c()
platform/chrome: cros_ec_proto: drop BUG_ON() in cros_ec_get_host_event()
platform/chrome: cros_ec_proto: drop BUG_ON() in cros_ec_prepare_tx()
platform/chrome: correct cros_ec_prepare_tx() usage
platform/chrome: cros_ec_proto: drop unneeded BUG_ON() in prepare_packet()
platform/chrome: Add ChromeOS ACPI device driver
platform/chrome: cros_ec_typec: Check for EC driver
platform/chrome: cros_ec_lpcs: reserve the MEC LPC I/O ports first
platform/chrome: cros_ec_lpcs: detect the Framework Laptop
platform/chrome: Re-introduce cros_ec_cmd_xfer and use it for ioctls
platform/chrome: cros_ec: append newline to all logs
platform/chrome: cros_ec: sort header inclusion alphabetically
platform/chrome: cros_ec: determine `wake_enabled` in cros_ec_suspend()
platform/chrome: cros_ec: remove unused variable `was_wake_device`
platform/chrome: cros_ec: fix error handling in cros_ec_register()
The driver is using functions from a compilation unit which is enabled
by CONFIG_CPU_SUP_INTEL. Add that dependency to Kconfig explicitly
otherwise:
drivers/platform/x86/intel/ifs/load.o: in function `ifs_load_firmware':
load.c:(.text+0x3b8): undefined reference to `intel_cpu_collect_info'
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/YoZay8YR0zRGyVu+@zn.tnic
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In the context, the following conditions are always false:
- `todo` < 0
Suppose that EC_SPI_FRAME_START is found at the last byte of transfer.
In the case, `ptr` == `end` - 1. As a result, `todo` must be 0.
- `todo` > `ec_dev->din_size`
Suppose that there is no preamble bytes. EC_SPI_FRAME_START is found at
the first byte of transfer.
In the case, `end` == `ptr` + EC_MSG_PREAMBLE_COUNT.
As a result, `todo` == EC_MSG_PREAMBLE_COUNT - 1.
However, it already checked `ec_dev->din_size` < EC_MSG_PREAMBLE_COUNT at
the beginning of function.
Drop the unneeded BUG_ON().
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220513044143.1045728-7-tzungbi@kernel.org
The x86 Chromebooks have the ChromeOS ACPI device. This driver attaches
to the ChromeOS ACPI device and exports the values reported by ACPI in a
sysfs directory. This data isn't present in ACPI tables when read
through ACPI tools, hence a driver is needed to do it. The driver gets
data from firmware using the ACPI component of the kernel. The ACPI values
are presented in string form (numbers as decimal values) or binary
blobs, and can be accessed as the contents of the appropriate read only
files in the standard ACPI device's sysfs directory tree. This data is
consumed by the ChromeOS user space.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Co-developed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/Yn4OKYrtV35Dv+nd@debian-BULLSEYE-live-builder-AMD64
Calling hwmon_device_register_with_info() with NULL dev and/or chip
information parameters is an ABI abuse and not a real conversion to
the new API. Also, the code creates sysfs attributes _after_ creating
the hwmon device, which is racy and unsupported to start with. On top
of that, the removal code tries to remove the name attribute which is
owned by the hwmon core.
Use hwmon_device_register_with_groups() to register the hwmon device
instead.
In the future, the hwmon subsystem will reject calls to
hwmon_device_register_with_info with NULL dev or chip/info parameters.
Without this patch, the hwmon device will fail to register.
Fixes: f59dc51191 ("MIPS: Loongson: Fix boot warning about hwmon_device_register()")
Cc: Zhi Li <lizhi01@loongson.cn>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add documentation for In-Field Scan (IFS). This documentation
describes the basics of IFS, the loading IFS image, chunk
authentication, running scan and how to check result via sysfs.
The CORE_CAPABILITIES MSR enumerates whether IFS is supported.
The full github location for distributing the IFS images is
still being decided. So just a placeholder included for now
in the documentation.
Future CPUs will support more than one type of test. Plan for
that now by using a "_0" suffix on the ABI directory names.
Additional test types will use "_1", etc.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220506225410.1652287-13-tony.luck@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
