Updates for v6.6, which includes a backmerge of msm-fixes to avoid conficts.
Core:
- SM6125 MDSS support
DPU:
- SM6125 DPU support
- Added subblocks to display snapshot
- Use UBWC data from MDSS driver rather than duplicating it
- dpu_core_perf cleanup
DSI:
- Enabled burst mode to fix CMD mode panels
- Runtime PM support
- refgen regulator support
DSI PHY:
- SM6125 support in 14nm DSI PHY driver
GPU:
- Rework GPU identification to prepare for a7xx, and other a7xx prep
- Cleanups and fixes
- Disallow legacy relocs on a6xx and newer
- a690: switch to using a660_gmu.bin fw as this is what we have in
linux-firmware and we see no evidence that it should be different
from other a660 family (a6xx subgen 4) devices
- Submit overhead opts, 1.6x faster for NO_IMPLICIT_SYNC commits with
100 BOs to 2.5x faster for 1000 BOs
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv_01g-edjdfKLWWcb-rO5aSyLsv5FpbKrTkXVL9+ngTQ@mail.gmail.com
Pull pin control fixes from Linus Walleij:
"Fixes two issues with the Qualcomm SA8775P platform:
- Some minor device tree binding flunky that is nice to iron out but
more importantly:
- Support the increased interrupt targets mask from 3 to 4 bits,
making interrupts with higher (hardware) numbers work"
* tag 'pinctrl-v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: Add intr_target_width field to support increased number of interrupt targets
dt-bindings: pinctrl: qcom,sa8775p-tlmm: add gpio function constant
Pull char / misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for 6.5-rc6 that resolve
some reported issues. Included in here are:
- bunch of iio driver fixes for reported problems
- interconnect driver fixes
- counter driver build fix
- cardreader driver fixes
- binder driver fixes
- other tiny driver fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
misc: tps6594-esm: Disable ESM for rev 1 PMIC
misc: rtsx: judge ASPM Mode to set PETXCFG Reg
binder: fix memory leak in binder_init()
iio: cros_ec: Fix the allocation size for cros_ec_command
tools/counter: Makefile: Replace rmdir by rm to avoid make,clean failure
iio: imu: lsm6dsx: Fix mount matrix retrieval
iio: adc: meson: fix core clock enable/disable moment
iio: core: Prevent invalid memory access when there is no parent
iio: frequency: admv1013: propagate errors from regulator_get_voltage()
counter: Fix menuconfig "Counter support" submenu entries disappearance
dt-bindings: iio: adi,ad74115: remove ref from -nanoamp
iio: adc: ina2xx: avoid NULL pointer dereference on OF device match
iio: light: bu27008: Fix intensity data type
iio: light: bu27008: Fix scale format
iio: light: bu27034: Fix scale format
iio: adc: ad7192: Fix ac excitation feature
interconnect: qcom: sa8775p: add enable_mask for bcm nodes
interconnect: qcom: sm8550: add enable_mask for bcm nodes
interconnect: qcom: sm8450: add enable_mask for bcm nodes
interconnect: qcom: Add support for mask-based BCMs
...
Jonathan writes:
1st set of IIO fixes for 6.5
Usual mixed bag of fixes for recently introduced issues and ones from way
back that have recently been noticed.
* core
- Avoid a device with no parent issues seen on the dummy example device.
* adi,ad71145
- Drop ref now that dt-schema supports -nanoamp.
* adi,ad7192
- Fix wrong bit set for enabling AC excitation and exposure of control
on devices without the feature.
* adi,admv1013
- Don't ignore errors from regulator_get_voltage().
* amlogic,meson-adc
- Make sure clocks enabled early enough.
* google,cros_ec
- Fix undersized cros_ec_command allocation that resulted in a buffer
overrun.
* rohm,bu27008
- Fix truncation issue with scale format that prevents smallest value
being set
- Report intensity as unsigned. Previously large values would be
interpretted as negative intensities (and odd concept).
* rohm,bu27034
- Fix truncation issue with scale format that prevents smallest value
being set.
* st,lsm6dsx
- Return an error code, not false (which is 0 and hence success)
to indicate ACPI mount matrix retrieval failed due to no ACPI
support.
* ti,ina2xx
- Avoid a NULL pointer dereference if fall back compatible is used.
* tag 'iio-fixes-for-6.5a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: cros_ec: Fix the allocation size for cros_ec_command
iio: imu: lsm6dsx: Fix mount matrix retrieval
iio: adc: meson: fix core clock enable/disable moment
iio: core: Prevent invalid memory access when there is no parent
iio: frequency: admv1013: propagate errors from regulator_get_voltage()
dt-bindings: iio: adi,ad74115: remove ref from -nanoamp
iio: adc: ina2xx: avoid NULL pointer dereference on OF device match
iio: light: bu27008: Fix intensity data type
iio: light: bu27008: Fix scale format
iio: light: bu27034: Fix scale format
iio: adc: ad7192: Fix ac excitation feature
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and wireless.
Nothing scary here. Feels like the first wave of regressions from v6.5
is addressed - one outstanding fix still to come in TLS for the
sendpage rework.
Current release - regressions:
- udp: fix __ip_append_data()'s handling of MSG_SPLICE_PAGES
- dsa: fix older DSA drivers using phylink
Previous releases - regressions:
- gro: fix misuse of CB in udp socket lookup
- mlx5: unregister devlink params in case interface is down
- Revert "wifi: ath11k: Enable threaded NAPI"
Previous releases - always broken:
- sched: cls_u32: fix match key mis-addressing
- sched: bind logic fixes for cls_fw, cls_u32 and cls_route
- add bound checks to a number of places which hand-parse netlink
- bpf: disable preemption in perf_event_output helpers code
- qed: fix scheduling in a tasklet while getting stats
- avoid using APIs which are not hardirq-safe in couple of drivers,
when we may be in a hard IRQ (netconsole)
- wifi: cfg80211: fix return value in scan logic, avoid page
allocator warning
- wifi: mt76: mt7615: do not advertise 5 GHz on first PHY of MT7615D
(DBDC)
Misc:
- drop handful of inactive maintainers, put some new in place"
* tag 'net-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (98 commits)
MAINTAINERS: update TUN/TAP maintainers
test/vsock: remove vsock_perf executable on `make clean`
tcp_metrics: fix data-race in tcpm_suck_dst() vs fastopen
tcp_metrics: annotate data-races around tm->tcpm_net
tcp_metrics: annotate data-races around tm->tcpm_vals[]
tcp_metrics: annotate data-races around tm->tcpm_lock
tcp_metrics: annotate data-races around tm->tcpm_stamp
tcp_metrics: fix addr_same() helper
prestera: fix fallback to previous version on same major version
udp: Fix __ip_append_data()'s handling of MSG_SPLICE_PAGES
net/mlx5e: Set proper IPsec source port in L4 selector
net/mlx5: fs_core: Skip the FTs in the same FS_TYPE_PRIO_CHAINS fs_prio
net/mlx5: fs_core: Make find_closest_ft more generic
wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1()
vxlan: Fix nexthop hash size
ip6mr: Fix skb_under_panic in ip6mr_cache_report()
s390/qeth: Don't call dev_close/dev_open (DOWN/UP)
net: tap_open(): set sk_uid from current_fsuid()
net: tun_chr_open(): set sk_uid from current_fsuid()
net: dcb: choose correct policy to parse DCB_ATTR_BCN
...
Pull ARM SoC fixes from Arnd Bergmann:
"A couple of platforms get a lone dts fix each:
- SoCFPGA: Fix incorrect I2C property for SCL signal
- Renesas: Fix interrupt names for MTU3 channels on RZ/G2L and
RZ/V2L.
- Juno/Vexpress: remove a dangling symlink
- at91: sam9x60 SoC detection compatible strings
- nspire: Fix arm primecell compatible string
On the NXP i.MX platform, there multiple issues that get addressed:
- A couple of ARM DTS fixes for i.MX6SLL usbphy and supported CPU
frequency of sk-imx53 board
- Add missing pull-up for imx8mn-var-som onboard PHY reset pinmux
- A couple of imx8mm-venice fixes from Tim Harvey to diable
disp_blk_ctrl
- A couple of phycore-imx8mm fixes from Yashwanth Varakala to correct
VPU label and gpio-line-names
- Fix imx8mp-blk-ctrl driver to register HSIO PLL clock as
bus_power_dev child, so that runtime PM can translate into the
necessary GPC power domain action
On the driver side, there are two fixes for tegra memory controller
drivers addressing regressions from the merge window, a couple of
minor correctness fixes for SCMI and SMCCC firmware, as well as a
build fix for an lcd backlight driver"
* tag 'soc-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (22 commits)
backlight: corgi_lcd: fix missing prototype
memory: tegra: make icc_set_bw return zero if BWMGR not supported
arm64: dts: renesas: rzg2l: Update overfow/underflow IRQ names for MTU3 channels
dt-bindings: serial: atmel,at91-usart: update compatible for sam9x60
ARM: dts: at91: sam9x60: fix the SOC detection
ARM: dts: nspire: Fix arm primecell compatible string
firmware: arm_scmi: Fix chan_free cleanup on SMC
firmware: arm_scmi: Drop OF node reference in the transport channel setup
soc: imx: imx8mp-blk-ctrl: register HSIO PLL clock as bus_power_dev child
ARM: dts: nxp/imx: limit sk-imx53 supported frequencies
firmware: arm_scmi: Fix signed error return values handling
firmware: smccc: Fix use of uninitialised results structure
arm64: dts: freescale: Fix VPU G2 clock
arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmux
arm64: dts: phycore-imx8mm: Correction in gpio-line-names
arm64: dts: phycore-imx8mm: Label typo-fix of VPU
ARM: dts: nxp/imx6sll: fix wrong property name in usbphy node
arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrl
arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrl
arm64: dts: arm: Remove the dangling vexpress-v2m-rs1.dtsi symlink
...
As talked about in the patch ("drm/panel: Add a way for other devices
to follow panel state"), touchscreens that are connected to panels are
generally expected to be power sequenced together with the panel
they're attached to. Today, nothing provides information allowing you
to find out that a touchscreen is connected to a panel. Let's add a
phandle for this.
The proerty is added to the generic touchscreen bindings and then
enabled in the bindings for the i2c-hid backed devices. This can and
should be added for other touchscreens in the future, but for now
let's start small.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.1.Id68e30343bb1e11470582a9078b086176cfec46b@changeid
1. Use unevaluatedProperties
It's needed to allow ethernet-controller.yaml properties work correctly.
2. Drop unneeded phy-handle/phy-mode
3. Don't require phy-handle
Some SoCs may use fixed link.
For in-kernel MT7621 DTS files this fixes following errors:
arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@0: 'fixed-link' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml
arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@0: 'phy-handle' is a required property
From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml
arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@1: 'fixed-link' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml
arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@1: 'phy-handle' is a required property
From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The range and the defaults are specified in the description instead of
being specified in the schema.
Fix it by adding the default value in the `default` field and specifying
the range as `minimum` and `maximum`.
Fixes: b331b8ef86 ("dt-bindings: net: convert rockchip-dwmac to json-schema")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is only one debug unit in the sam9x60 SOC and it has the chipid
register. So, the dbgu compatible strings are valid only for debug usart.
Defining these dbgu compatible strings are not valid for flexcom usart.
So adding the items which is valid only for flexcom usart and removing
the microchip,sam9x60-usart compatible string from the enum list as no
usart node defines only this specific compatible string.
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230718065735.10187-2-durai.manickamkr@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull devicetree fixes from Rob Herring:
- Fix moortec,mr75203 schema usage of 'multipleOf' keyword
- Fix regression in systems depending on "of-display" device name
- Build fix for s390 with CONFIG_PCI=n and OF_EARLY_FLATTREE=y
- Drop two obsolete serial .txt bindings
* tag 'devicetree-fixes-for-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: serial: Remove obsolete nxp,lpc1850-uart.txt
dt-bindings: serial: Remove obsolete cavium-uart.txt
dt-bindings: hwmon: moortec,mr75203: fix multipleOf for coefficients
of: Preserve "of-display" device name for compatibility
of: make OF_EARLY_FLATTREE depend on HAS_IOMEM
drm-misc-next for v6.6:
UAPI Changes:
* fbdev:
* Make fbdev userspace interfaces optional; only leaves the
framebuffer console active
* prime:
* Support dma-buf self-import for all drivers automatically: improves
support for many userspace compositors
Cross-subsystem Changes:
* backlight:
* Fix interaction with fbdev in several drivers
* base: Convert struct platform.remove to return void; part of a larger,
tree-wide effort
* dma-buf: Acquire reservation lock for mmap() in exporters; part
of an on-going effort to simplify locking around dma-bufs
* fbdev:
* Use Linux device instead of fbdev device in many places
* Use deferred-I/O helper macros in various drivers
* i2c: Convert struct i2c from .probe_new to .probe; part of a larger,
tree-wide effort
* video:
* Avoid including <linux/screen_info.h>
Core Changes:
* atomic:
* Improve logging
* prime:
* Remove struct drm_driver.gem_prime_mmap plus driver updates: all
drivers now implement this callback with drm_gem_prime_mmap()
* gem:
* Support execution contexts: provides locking over multiple GEM
objects
* ttm:
* Support init_on_free
* Swapout fixes
Driver Changes:
* accel:
* ivpu: MMU updates; Support debugfs
* ast:
* Improve device-model detection
* Cleanups
* bridge:
* dw-hdmi: Improve support for YUV420 bus format
* dw-mipi-dsi: Fix enable/disable of DSI controller
* lt9611uxc: Use MODULE_FIRMWARE()
* ps8640: Remove broken EDID code
* samsung-dsim: Fix command transfer
* tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups
* Cleanups
* ingenic:
* Kconfig REGMAP fixes
* loongson:
* Support display controller
* mgag200:
* Minor fixes
* mxsfb:
* Support disabling overlay planes
* nouveau:
* Improve VRAM detection
* Various fixes and cleanups
* panel:
* panel-edp: Support AUO B116XAB01.4
* Support Visionox R66451 plus DT bindings
* Cleanups
* ssd130x:
* Support per-controller default resolution plus DT bindings
* Reduce memory-allocation overhead
* Cleanups
* tidss:
* Support TI AM625 plus DT bindings
* Implement new connector model plus driver updates
* vkms
* Improve write-back support
* Documentation fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230713090830.GA23281@linux-uq9g
The example in audio-graph-card2 binding is incomplete, uses
undocumented compatibles strings, and doesn't follow typical .dts
formatting. Rather than try to fix with what would probably be a lengthy
example, just drop the example.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230707221725.1071292-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
