- Override the det to adjust microschedule timings allow for
1080p configs with SubVP
- To lower unnecessary risk, we prevent multi 1080p configs
from using SubVP, as multi 1080p already has low idle power.
- Count the number of streams to verify that we are in a
SubVP config before overriding
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Ethan Bitnun <ethan.bitnun@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This partially reverts commit 460ea89805 ("drm/amd/display: update add
plane to context logic with a new algorithm").
The new secondary pipe allocation logic triggers an issue with a
specific hardware state transition and causes a frame of corruption when
toggling between windowed MPO and ODM desktop only mode. Ideally hwss is
supposed to handle this scenario. We are temporarily reverting the logic
and investigate the root cause why this transition would cause
corruptions.
Fixes: 460ea89805 ("drm/amd/display: update add plane to context logic with a new algorithm")
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Ensure FS is enabled before sending request to DMUB for FS changes
- Add check for PMFW hard min request complete
- Save addr update in scratch before flip
- Fix static screen detection setting
- Write flip addr to scratch reg for subvp
- set minimum of VBlank_nom
- Correct unit conversion for vstartup
- Roll back unit correction
- Enable runtime register offset init for DCN32 DMUB
- Refactor edp power control
- PQ regamma end point
- PQ tail accuracy
- Expose mall capability
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
ignore_msa_timing_param indicates FS is capable but not necessarily enabled
[How]
add check for either allow_freesync or vrr_active_variable to confirm FS is enabled
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When we issue hard min request to PMFW, the ack back does not
guarantee the request has been fulfilled.
[How]
Add new PMFW message to check if the hard min request has been
completed. Returned bit mask indicates which clock requests are
completed. Check PMFW version before using message
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
OTG_STATIC_SCREEN_EVENT_MASK is changed in DCN3,
but we still follow DCN2 to apply setting for
OTG_STATIC_SCREEN_EVENT_MASK.
[How]
Add new function to apply correct settings for DCN3 series.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: SungHuai Wang <danny.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
SubVP needs to "calculate" the earliest in use META address
by using the current primary / meta addresses, but this leads
to a race condition where FW and driver can read/write the
address at the same time and intermittently produce inconsistent
address offsets. To mitigate this issue without locking (too slow),
save each surface flip addr into scratch registers and use this
to keep track of the earliest in use META addres.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If VBlank_nom is too small, it will cause
VStartUP_Start smaller than VBackPorch + VSync width which is an
invalid case for VStartUP_Start and where to send AS-SDP.
[How]
Setup a minimum value to VBlank_nom
Reviewed-by: Reza Amini <reza.amini@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: ChunTao Tso <chuntao.tso@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
vstartup is calculated to be a large number. it works because
it is within vertical blank, but it reduces region of blank that
can be used for power gating.
[how]
Calculation needs to convert micro seconds to number of
vertical lines.
Reviewed-by: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Reza Amini <reza.amini@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
This Unit correction exposes a Replay corruption.
[how]
This reverts commit:
commit dbd29029c7 ("drm/amd/display: Correct unit conversion for vstartup")
Roll back unit conversion until Replay can fix their corruption.
Fixes: dbd29029c7 ("drm/amd/display: Correct unit conversion for vstartup")
Reviewed-by: Reza Amini <reza.amini@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
To organize the edp power control a bit:
1. add flag in dc_link to indicate dc to skip all implicit eDP power control.
2. add edp_set_panel_power link service for DM to call.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
HW LUTs changed slightly in DCN3: 256 base+slope pairs were replaced by
257 bases. Code was still calculating all 256 base+slope and then
creating 257th pt as last base + last slope.
This was done in wrong format, and then "fixed" it by making the last
two points the same thus making the last slope=0.
However, this also created some precision problems near the end that
are not visible but they do show up with capture cards.
Solution is to calculate 257 and remove deltas since we no longer have
those HW registers.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Improve power saving feature
- Clean up for code clarity
- Fix crashing bug
- Fix pipe allocation for older ASIC
- Fix for gamut remap
- Fix 8K 60Hz display in test cases
- Fix bug in clock gating
- Improve DP2 compliance
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There is a lack of encapsulation of pipe connection representation in pipe context.
This has caused many challenging bugs and coding errors with repeated
logic to identify the same pipe type.
[how]
Formally define pipe types and provide getters to identify a pipe type and
find a pipe based on specific requirements. Update existing logic in non dcn
specific files and dcn32 and future versions to use the new accessors.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
8k60hz compliace test failing because we restrict it single memory
channels. Workaround by not restricting it on single displays.
[How]
Adding an additional check to DCN314 to restrict 8k60hz mode if it has
more than 1 display connected.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There is a recent work for developing a new pipe resource allocation
policy used for new ASIC. The new code change needs to modify asic
independent pipe resource allocation flow and hook up the new allocation
policy in asic dependent layer. Unfortunately this change revealed a
hidden bug in the old pipe resource allocation sequence used for older
asics. In the older version of acquiring pipe for layer, we are always
assigning otg master's opp and tg to the newly allocated secondary dpp
pipe. This logic is incorrect when the secodnary dpp
pipe is connected to a secondary opp head pipe in ODM combine
configuration. Before the recent change, we will overwrite this wrong
assignement in asic independent layer again. This covers up the issue.
With the recent change, we will no longer cover up this in upper layer
and therefore causes wrong tg and opp assignement to the secondary
dpp pipe connected to a secondary opp head.
[how]
Always assign tg and opp from its own opp head instead of otg master.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
If surface format is dynamically changed within app without changing
timing / whole plane, we don't reprogram gamut remap matrix.
Issue example:
Linear FP16 scRGB going to PQ+BT.2020 monitor.
Remap = scRGB->BT.2020
App switches swapchain format to 10-bit PQ+BT.2020.
SW calculates correctly that new Remap = bypass (in=-out=BT.2020).
But update not applied in HW.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Certain retimer requires workarounds in order to correctly output test patterns.
[HOW]
Add vendor-specific aux sequences to program retimer's TX and pattern generator
when specific compliance test patterns are requested by sink.
Note: SQ128 w/a in DPMF mode only works in one flip orientation currently
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The NULL initialization of the pointers assigned by kzalloc() first is
not necessary, because if the kzalloc() failed, the pointers will be
assigned NULL, otherwise it works as usual. so remove it.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These functions don't use kernel-doc notation for comments so
don't begin each comment block with the "/**" kernel-doc marker.
This prevents a bunch of kernel-doc warnings:
dmub_replay.c:37: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
dmub_replay.c:37: warning: missing initial short description on line:
* Get Replay state from firmware.
dmub_replay.c:66: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
dmub_replay.c:66: warning: missing initial short description on line:
* Enable/Disable Replay.
dmub_replay.c:116: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
dmub_replay.c:116: warning: missing initial short description on line:
* Set REPLAY power optimization flags.
dmub_replay.c:134: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
dmub_replay.c:134: warning: missing initial short description on line:
* Setup Replay by programming phy registers and sending replay hw context values to firmware.
and 10 more similar warnings.
Fixes: c7ddc0a800 ("drm/amd/display: Add Functions to enable Freesync Panel Replay")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: lore.kernel.org/r/202308081459.US5rLYAY-lkp@intel.com
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: Christian König <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add checks for Cursor update and dirty rects (sending updates to dmub)
- Add checks for dc_notify_vsync, and fbc and subvp
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: spaces required around that '?' (ctx:VxE)
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: else should follow close brace '}'
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: else should follow close brace '}'
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: that open brace { should be on the previous line
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: switch and case should be at the same indent
ERROR: code indent should use tabs where possible
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
ERROR: code indent should use tabs where possible
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
ERROR: code indent should use tabs where possible
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: space required before the open brace '{'
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: space required before the open brace '{'
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: spaces required around that '=' (ctx:WxV)
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: space required after that ',' (ctx:VxV)
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: space required after that ',' (ctx:VxV)
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are many ternary operators, the true or false judgement
of which is unnecessary in C language semantics.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added return value check hpd_enable
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix a regression in blank pixel data caused by coding mistake
- Fix a bug when searching for insert_above_mpcc
- Update add plane to context logic with a new algorithm
- Adjust visual confirm dpp height offset to be 1/240 of v addressable
- Add interface to enable DPIA trace
- Support plane clip with zero recout size
- Blocking invalid 420 modes on HDMI TMDS for DCN31 and DCN314
- Make mpc32 functions available to future DCNs
- Change HDCP update sequence for DM
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Martin Leung <martin.leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Secondary DPP pipes are used for rendering secondary layers of planes.
The name "for layer" doesn't make it obvious. The function is acquiring
a free pipe as secondary dpp pipe only. We rename it so it is more obvious.
In a future follow up change, we want to add functions to acquire free pipe as
opp head pipe or otg master pipe as well. They will have their separate
allocation priority.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
