DMA address reference within svm_ranges should be unmapped only after
the memory has been released from the system. In case of range
splitting, the DMA address information should be copied to the
corresponding range after this has split. But leaving dma mapping
intact.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add initial support for IH 6.1.
v2: Fix copyright date (Alex)
Signed-off-by: Ben Li <ben.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On PSP v13.x ASICs, boot loader will set only the MSB to 1 and clear the
least significant bits for any command submission. Hence match against
the exact register value, otherwise a register value of all 0xFFs also
could falsely indicate that boot loader is ready. Also, from PSP v13.0.6
and newer, bits[7:0] will be used to indicate command error status.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The driver's CSA buffer is shared by all the ibs. When the high priority ib
is submitted after the preempted ib, CP overrides the ib_completion_status
as completed in the csa buffer. After that the preempted ib is resubmitted,
CP would clear some locals stored for ib resume when reading the completed
status, which causes gpu hang in some cases.
Always set status as preempted for those resubmitted ib instead of reading
everything from the CSA buffer.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2535
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2717
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The MES cached process context must be cleared on adding any queue for
the first time.
For proper debug support, the MES will clear it's cached process context
on the first call to SET_SHADER_DEBUGGER.
This allows TTMPs to be pesistently enabled in a safe manner.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Eric Huang <jinhuieric@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following:
WARNING: externs should be avoided in .c files
+extern const struct attribute_group amdgpu_vram_mgr_attr_group;
WARNING: externs should be avoided in .c files
+extern const struct attribute_group amdgpu_gtt_mgr_attr_group;
WARNING: externs should be avoided in .c files
+extern const struct attribute_group amdgpu_flash_attr_group;
And other style fixes:
WARNING: Block comments should align the * on each line
WARNING: void function return statements are not generally useful
WARNING: braces {} are not necessary for single statement blocks
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Changed from printk to dev_* variants so that
we get better debug info when there are multiple GPUs
in the system.
Fixes other style issue:
ERROR: open brace '{' following function definitions go on the next line
WARNING: printk() should include KERN_<LEVEL> facility level
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ENOSYS should be used for nonexistent syscalls only, replace ENOSYS with
EOPNOTSUPP for reset handlers that are not implemented for respective ASIC.
WARNING: ENOSYS means 'invalid syscall nr' and nothing else
+ if (r == -ENOSYS)
WARNING: ENOSYS means 'invalid syscall nr' and nothing else
+ if (r == -ENOSYS)
And other following style fixes in amdgpu_device.c:
WARNING: Symbolic permissions 'S_IRUGO' are not preferred. Consider using octal permissions '0444'.
WARNING: Block comments should align the * on each line
WARNING: Missing a blank line after declarations
WARNING: braces {} are not necessary for single statement blocks
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: "foo* bar" should be "foo *bar"
ERROR: spaces required around that '=' (ctx:VxW)
ERROR: space prohibited before that close parenthesis ')'
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: spaces required around that '=' (ctx:VxW)
ERROR: spaces required around that '>=' (ctx:WxV)
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following function definitions go on the next line
ERROR: space required before the open parenthesis '('
ERROR: space required after that ',' (ctx:VxV)
ERROR: spaces required around that '=' (ctx:VxW)
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On GFX v9.4.3, compute queue MQD is populated using the values in HQD
persistent state register. Hence don't clear the values on module
unload, instead restore it to the default reset value so that MQD is
initialized correctly during next module load. In particular, preload
flag needs to be set on compute queue MQD, otherwise it could cause
uninitialized values being used at device reset state resulting in EDC.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This error path needs to unlock the "aconnector->handle_mst_msg_ready"
mutex before returning.
Fixes: 4f6d9e38c4 ("drm/amd/display: Add polling method to handle MST reply packet")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
It is not valid to set the WDIVIDER value to 0, so do not
re-write to DISPCLK_WDIVIDER if the current value is 0
(i.e., it is at it's initial value and we have not made any
requests to change DISPCLK yet).
Reviewed-by: Saaem Rizvi <syedsaaem.rizvi@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Report current GFX clock also from average clock value as the original
CurrClock data is not valid/accurate any more as per FW team
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the second call to amdgpu_bo_create_kernel() fails, the memory
allocated from the first call should be cleared. If the third call
fails, the memory from the second call should be cleared.
Fixes: b95b539168 ("drm/amdgpu/psp: move PSP memory alloc from hw_init to sw_init")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
An instance of for_each_inst() was not changed to match its new
behaviour and is causing a loop.
v2: remove tmp_mask variable
Fixes: b579ea632f ("drm/amdgpu: Modify for_each_inst macro")
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On GFX v9.4.3, compute queue MQD is populated using the values in HQD
persistent state register. Hence don't clear the values on module
unload, instead restore it to the default reset value so that MQD is
initialized correctly during next module load. In particular, preload
flag needs to be set on compute queue MQD, otherwise it could cause
uninitialized values being used at device reset state resulting in EDC.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To acquire the voltage and current info from gpu_metrics interface,
but gpu_metrics_v2_3 doesn't contain them, and to be backward compatible,
add new gpu_metrics_v2_4 structure.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Wenyou Yang <WenYou.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
User mode driver need to check the sdma ucode version to
see whether the sdma engine supports a new type of PM4 packet.
In SRIOV, sdma is loaded by the host. And, there is no way
to check the sdma ucode version of CHIP_NAVI12 and
CHIP_SIENNA_CICHLID of the host in the guest machine.
[how]
Load the sdma ucode for CHIP_NAVI12 and CHIP_SIENNA_CICHLID
in the guest machine.
Signed-off-by: YuanShang <YuanShang.Mao@amd.com>
Reviewed-By: Horace Chen <horace.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
