Numeric events are either raw events or those with ABI defined numbers
matched by the lexer. PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE events
should wildcard match on hybrid systems. So "cycles" should match each
PMU type with an extended type, not just PERF_TYPE_HARDWARE.
Change wildcard matching to add the event even if wildcard PMU
scanning fails, there will be no extended type but this best matches
previous behavior.
Only set the extended type when the event type supports it and when
perf_pmus__supports_extended_type is true. This new function returns
true if >1 core PMU and avoids potential errors on older kernels.
Modify evsel__compute_group_pmu_name using a helper
perf_pmu__is_software to determine when grouping should occur. Try to
use PMUs, and evsel__find_pmu, as being more dependable than
evsel->pmu_name.
Set a parse events error if a hardware term's PMU lookup fails, to
provide extra diagnostics.
Fixes: 8bc75f699c ("perf parse-events: Support wildcards on raw events")
Reported-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230601082954.754318-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These two helpers will also use openat() to reduce the overhead with
relative pathnames. Convert other functions in pmu_lookup() to use
the new helpers.
Committer testing:
Before:
⬢[acme@toolbox perf-tools-next]$ perf bench internals pmu-scan
# Running 'internals/pmu-scan' benchmark:
Computing performance of sysfs PMU event scan for 100 times
Average PMU scanning took: 2729.040 usec (+- 7.117 usec)
⬢[acme@toolbox perf-tools-next]$
After:
⬢[acme@toolbox perf-tools-next]$ perf bench internals pmu-scan
# Running 'internals/pmu-scan' benchmark:
Computing performance of sysfs PMU event scan for 100 times
Average PMU scanning took: 2419.870 usec (+- 9.057 usec)
⬢[acme@toolbox perf-tools-next]$
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230331202949.810326-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The PMU information is in the kernel sysfs so it needs to scan the
directory to get the whole information like event aliases, formats and
so on. During the traversal, it opens a lot of files and directories
like below:
dir = opendir("/sys/bus/event_source/devices");
while (dentry = readdir(dir)) {
char buf[PATH_MAX];
snprintf(buf, sizeof(buf), "%s/%s",
"/sys/bus/event_source/devices", dentry->d_name);
fd = open(buf, O_RDONLY);
...
}
But this is not good since it needs to copy the string to build the
absolute pathname, and it makes redundant pathname walk (from the /sys)
unnecessarily. We can use openat(2) to open the file in the given
directory. While it's not a problem ususally, it can be a problem when
the kernel has contentions on the sysfs.
Add a couple of new helper to return the file descriptor of PMU
directory so that it can use it with relative paths.
* perf_pmu__event_source_devices_fd()
- returns a fd for the PMU root ("/sys/bus/event_source/devices")
* perf_pmu__pathname_fd()
- returns a fd for "<pmu>/<file>" under the PMU root
Now the above code can be converted something like below:
dirfd = perf_pmu__event_source_devices_fd();
dir = fdopendir(dirfd);
while (dentry = readdir(dir)) {
fd = openat(dirfd, dentry->d_name, O_RDONLY);
...
}
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230331202949.810326-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previous changes separated the uses of pmu_event and pmu_metric,
however, both structures contained all the variables of event and
metric. This change removes the event variables from metric and the
metric variables from event.
Note, this change removes the setting of evsel's metric_name/expr as
these fields are no longer part of struct pmu_event. The metric
remains but is no longer implicitly requested when the event is. This
impacts a few Intel uncore events, however, as the ScaleUnit is shared
by the event and the metric this utility is questionable. Also the
MetricNames look broken (contain spaces) in some cases and when trying
to use the functionality with '-e' the metrics fail but regular
metrics with '-M' work. For example, on SkylakeX '-M' works:
```
$ perf stat -M LLC_MISSES.PCIE_WRITE -a sleep 1
Performance counter stats for 'system wide':
0 UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 # 57896.0 Bytes LLC_MISSES.PCIE_WRITE (49.84%)
7,174 UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 (49.85%)
0 UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 (50.16%)
63 UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 (50.15%)
1.004576381 seconds time elapsed
```
whilst the event '-e' version is broken even with --group/-g (fwiw, we should also remove -g [1]):
```
$ perf stat -g -e LLC_MISSES.PCIE_WRITE -g -a sleep 1
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Performance counter stats for 'system wide':
27,316 Bytes LLC_MISSES.PCIE_WRITE
1.004505469 seconds time elapsed
```
The code also carries warnings where the user is supposed to select
events for metrics [2] but given the lack of use of such a feature,
let's clean the code and just remove.
[1] https://lore.kernel.org/lkml/20220707195610.303254-1-irogers@google.com/
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/perf/util/stat-shadow.c?id=01b8957b738f42f96a130079bc951b3cc78c5b8a#n425
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230126233645.200509-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rather than controlling the list output with passed flags, add
callbacks that are called when an event or metric are
encountered. State is passed to the callback so that command line
options can be respected, alternatively the callbacks can be changed.
Fix a few bugs:
- wordwrap to columns metric descriptions and expressions;
- remove unnecessary whitespace after PMU event names;
- the metric filter is a glob but matched using strstr which will
always fail, switch to using a proper globmatch,
- the detail flag gives details for extra kernel PMU events like
branch-instructions.
In metricgroup.c switch from struct mep being a rbtree of metricgroups
containing a list of metrics, to the tree directly containing all the
metrics. In general the alias for a name is passed to the print
routine rather than being contained in the name with OR.
Committer notes:
Check the asprint() return to address this on fedora 36:
util/print-events.c: In function ‘print_sdt_events’:
util/print-events.c:183:33: error: ignoring return value of ‘asprintf’ declared with attribute ‘warn_unused_result’ [-Werror=unused-result]
183 | asprintf(&evt_name, "%s@%s(%.12s)", sdt_name->s, path, bid);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
$ gcc --version | head -1
gcc (GCC) 12.2.1 20220819 (Red Hat 12.2.1-2)
$
Fix ps.pmu_glob setting when dealing with *:* events, it was being left
with a freed pointer that then at the end of cmd_list() would be double
freed.
Check if pmu_name is NULL in default_print_event() before calling
strglobmatch(pmu_name, ...) to avoid a segfault.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xin Gao <gaoxin@cdjrlc.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: http://lore.kernel.org/lkml/20221114210723.2749751-10-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the kernel exposes a new perf_event_attr field in a format attr, perf
will return an error stating the specified PMU can't be found. For
example, a format attr with 'config3:0-63' causes an error as config3 is
unknown to perf. This causes a compatibility issue between a newer
kernel with older perf tool.
Before this change with a kernel adding 'config3' I get:
$ perf record -e arm_spe// -- true
event syntax error: 'arm_spe//'
\___ Cannot find PMU `arm_spe'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list
available events
After this change, I get:
$ perf record -e arm_spe// -- true
WARNING: 'arm_spe_0' format 'inv_event_filter' requires 'perf_event_attr::config3' which is not supported by this version of perf!
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.091 MB perf.data ]
To support unknown configN formats, rework the YACC implementation to
pass any config[0-9]+ format to perf_pmu__new_format() to handle with a
warning.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220914-arm-perf-tool-spe1-2-v2-v4-1-83c098e6212e@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current logic for the perf missing feature has a bug that it can
wrongly clear some modifiers like G or H. Actually some PMUs don't
support any filtering or exclusion while others do. But we check it as
a global feature.
For example, the cycles event can have 'G' modifier to enable it only in
the guest mode on x86. When you don't run any VMs it'll return 0.
# perf stat -a -e cycles:G sleep 1
Performance counter stats for 'system wide':
0 cycles:G
1.000721670 seconds time elapsed
But when it's used with other pmu events that don't support G modifier,
it'll be reset and return non-zero values.
# perf stat -a -e cycles:G,msr/tsc/ sleep 1
Performance counter stats for 'system wide':
538,029,960 cycles:G
16,924,010,738 msr/tsc/
1.001815327 seconds time elapsed
This is because of the missing feature detection logic being global.
Add a hashmap to set pmu-specific exclude_host/guest features.
Committer notes:
Fix 'perf test python' by adding a stub for evsel__find_pmu() in
tools/perf/util/python.c, document that it is used so far only for the
above reasons so that if anybody needs this in the python binding
usecases, we can revisit this.
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: http://lore.kernel.org/lkml/20211105205847.120950-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A perf uncore PMU may have two PMU names, a real name and an alias. The
alias is exported at /sys/bus/event_source/devices/uncore_*/alias.
The perf tool should support the alias as well.
Add alias_name in the struct perf_pmu to store the alias. For the PMU
which doesn't have an alias. It's NULL.
Introduce two X86 specific functions to retrieve the real name and the
alias separately.
Only go through the sysfs to retrieve the mapping between the real name
and the alias once. The result is cached in a list, uncore_pmu_list.
Nothing changed for the other ARCHs.
With the patch, the perf tool can monitor the PMU with either the real
name or the alias.
Use the real name,
$ perf stat -e uncore_cha_2/event=1/ -x,
4044879584,,uncore_cha_2/event=1/,2528059205,100.00,,
Use the alias,
$ perf stat -e uncore_type_0_2/event=1/ -x,
3659675336,,uncore_type_0_2/event=1/,2287306455,100.00,,
Committer notes:
Rename 'struct perf_pmu_alias_name' to 'pmu_alias', the 'perf_' prefix
should be used for libperf, things inside just tools/perf/ are being
moved away from that prefix.
Also 'pmu_alias' is shorter and reflects the abstraction.
Also don't use 'pmu' as the name for variables for that type, we should
use that for the 'struct perf_pmu' variables, avoiding confusion. Use
'pmu_alias' for 'struct pmu_alias' variables.
Co-developed-by: Jin Yao <yao.jin@linux.intel.com>
Co-developed-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Link: http://lore.kernel.org/lkml/20210902065955.1299-2-yao.jin@linux.intel.com
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf record' and 'perf stat' commands have supported the option
'-C/--cpus' to count or collect only on the list of CPUs provided. This
option needs to be supported for hybrid as well.
For hybrid support, it needs to check that the cpu list are available
on hybrid PMU. One example for AlderLake, cpu0-7 is 'cpu_core', cpu8-11
is 'cpu_atom'.
Before:
# perf stat -e cpu_core/cycles/ -C11 -- sleep 1
Performance counter stats for 'CPU(s) 11':
<not supported> cpu_core/cycles/
1.006179431 seconds time elapsed
The 'perf stat' command silently returned "<not supported>" without any
helpful information. It should error out pointing out that that cpu11
was not 'cpu_core'.
After:
# perf stat -e cpu_core/cycles/ -C11 -- sleep 1
WARNING: 11 isn't a 'cpu_core', please use a CPU list in the 'cpu_core' range (0-7)
failed to use cpu list 11
We also need to support the events without pmu prefix specified.
# perf stat -e cycles -C11 -- sleep 1
WARNING: 11 isn't a 'cpu_core', please use a CPU list in the 'cpu_core' range (0-7)
Performance counter stats for 'CPU(s) 11':
1,067,373 cpu_atom/cycles/
1.005544738 seconds time elapsed
The perf tool creates two cycles events automatically, cpu_core/cycles/ and
cpu_atom/cycles/. It checks that cpu11 is not 'cpu_core', then shows a warning
for cpu_core/cycles/ and only count the cpu_atom/cycles/.
If part of cpus are 'cpu_core' and part of cpus are 'cpu_atom', for example,
# perf stat -e cycles -C0,11 -- sleep 1
WARNING: use 0 in 'cpu_core' for 'cycles', skip other cpus in list.
WARNING: use 11 in 'cpu_atom' for 'cycles', skip other cpus in list.
Performance counter stats for 'CPU(s) 0,11':
1,914,704 cpu_core/cycles/
2,036,983 cpu_atom/cycles/
1.005815641 seconds time elapsed
It now automatically selects cpu0 for cpu_core/cycles/, selects cpu11 for
cpu_atom/cycles/, and output with some warnings.
Some more complex examples,
# perf stat -e cycles,instructions -C0,11 -- sleep 1
WARNING: use 0 in 'cpu_core' for 'cycles', skip other cpus in list.
WARNING: use 11 in 'cpu_atom' for 'cycles', skip other cpus in list.
WARNING: use 0 in 'cpu_core' for 'instructions', skip other cpus in list.
WARNING: use 11 in 'cpu_atom' for 'instructions', skip other cpus in list.
Performance counter stats for 'CPU(s) 0,11':
2,780,387 cpu_core/cycles/
1,583,432 cpu_atom/cycles/
3,957,277 cpu_core/instructions/
1,167,089 cpu_atom/instructions/
1.006005124 seconds time elapsed
# perf stat -e cycles,cpu_atom/instructions/ -C0,11 -- sleep 1
WARNING: use 0 in 'cpu_core' for 'cycles', skip other cpus in list.
WARNING: use 11 in 'cpu_atom' for 'cycles', skip other cpus in list.
WARNING: use 11 in 'cpu_atom' for 'cpu_atom/instructions/', skip other cpus in list.
Performance counter stats for 'CPU(s) 0,11':
3,290,301 cpu_core/cycles/
1,953,073 cpu_atom/cycles/
1,407,869 cpu_atom/instructions/
1.006260912 seconds time elapsed
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https //lore.kernel.org/r/20210723063433.7318-4-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some different PMU types may have the same substring. For example, on
Icelake server we have PMU types "uncore_imc" and
"uncore_imc_free_running". Both PMU types have the substring
"uncore_imc". But the parser wrongly thinks they are the same PMU type.
We enable an imc event,
perf stat -e uncore_imc/event=0xe3/ -a -- sleep 1
Perf actually expands the event to:
uncore_imc_0/event=0xe3/
uncore_imc_1/event=0xe3/
uncore_imc_2/event=0xe3/
uncore_imc_3/event=0xe3/
uncore_imc_4/event=0xe3/
uncore_imc_5/event=0xe3/
uncore_imc_6/event=0xe3/
uncore_imc_7/event=0xe3/
uncore_imc_free_running_0/event=0xe3/
uncore_imc_free_running_1/event=0xe3/
uncore_imc_free_running_3/event=0xe3/
uncore_imc_free_running_4/event=0xe3/
That's because the "uncore_imc_free_running" matches the
pattern "uncore_imc*".
Now we check that the last characters of PMU name is '_<digit>'.
For example, for pattern "uncore_imc*", "uncore_imc_0" is parsed ok, but
"uncore_imc_free_running_0" fails.
Fixes: b2b9d3a3f0 ("perf pmu: Support wildcards on pmu name in dynamic pmu events")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Agustin Vega-Frias <agustinv@codeaurora.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210701064253.1175-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The functions perf_pmu__is_hybrid and perf_pmu__find_hybrid_pmu
can be used to identify the hybrid platform and return the found
hybrid cpu pmu. All the detected hybrid pmus have been saved in
'perf_pmu__hybrid_pmus' list. So we just need to search this list.
perf_pmu__hybrid_type_to_pmu converts the user specified string
to hybrid pmu name. This is used to support the '--cputype' option
in next patches.
perf_pmu__has_hybrid checks the existing of hybrid pmu. Note that,
we have to define it in pmu.c (make pmu-hybrid.c no more symbol
dependency), otherwise perf test python would be failed.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210427070139.25256-7-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We identify the cpu_core pmu and cpu_atom pmu by explicitly
checking following files:
For cpu_core, checks:
"/sys/bus/event_source/devices/cpu_core/cpus"
For cpu_atom, checks:
"/sys/bus/event_source/devices/cpu_atom/cpus"
If the 'cpus' file exists and it has data, the pmu exists.
But in order not to hardcode the "cpu_core" and "cpu_atom",
and make the code in a generic way.
So if the path "/sys/bus/event_source/devices/cpu_xxx/cpus" exists, the
hybrid pmu exists. All the detected hybrid pmus are linked to a global
list 'perf_pmu__hybrid_pmus' and then next we just need to iterate the
list to get all hybrid pmu by using perf_pmu__for_each_hybrid_pmu.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210427070139.25256-6-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
