If any hardware IPs involved with the first phase of suspend fail, unwind
all steps to restore back to original state.
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For S3 on vangogh, PMFW needs to be notified before the
driver powers down RLC. This already happens in smu_disable_dpms()
so drop the superfluous call in amdgpu_device_suspend().
Co-developed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move everything to the supported resets masks rather than
having an explicit misc checks for this.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These were not set so soft recovery was inadvertantly
disabled.
Fixes: 6ac55eab4f ("drm/amdgpu: move reset support type checks into the caller")
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-redundant explicit call to
pm_runtime_mark_last_busy().
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Newer VPE microcode has functionality that will decrease DPM level
only when a workload has run for 2 or more seconds. If VPE is turned
off before this DPM decrease and the PMFW doesn't reset it when
power gating VPE, the SOC can get stuck with a higher DPM level.
This can happen from amdgpu's ring buffer test because it's a short
quick workload for VPE and VPE is turned off after 1s.
[How]
In idle handler besides checking fences are drained check PMFW version
to determine if it will reset DPM when power gating VPE. If PMFW will
not do this, then check VPE DPM level. If it is not DPM0 reschedule
delayed work again until it is.
v2: squash in return fix (Alex)
Cc: Peyton.Lee@amd.com
Reported-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Sultan Alsawaf <sultan@kerneltoast.com>
Tested-by: Sultan Alsawaf <sultan@kerneltoast.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4615
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3ac635367e)
Cc: stable@vger.kernel.org
The function svm_range_validate_and_map() was freeing `range` when
amdgpu_hmm_range_get_pages() failed. But later, the code still used the
same `range` pointer and freed it again. This could cause a
use-after-free and double-free issue.
The fix sets `range = NULL` right after it is freed and checks for
`range` before using or freeing it again.
v2: Removed duplicate !r check in the condition for clarity.
v3: In amdgpu_hmm_range_get_pages(), when hmm_range_fault() fails, we
kvfree(pfns) but leave the pointer in hmm_range->hmm_pfns still pointing
to freed memory. The caller (or amdgpu_hmm_range_free(range)) may try to
free range->hmm_range.hmm_pfns again, causing a double free, Setting
hmm_range->hmm_pfns = NULL immediately after kvfree(pfns) prevents both
double free. (Philip)
In svm_range_validate_and_map(), When r == 0, it means success → range
is not NULL. When r != 0, it means failure → already made range = NULL.
So checking both (!r && range) is unnecessary because the moment r == 0,
we automatically know range exists and is safe to use. (Philip)
Fixes: 737da5363c ("drm/amdgpu: update the functions to use amdgpu version of hmm")
Reported by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Philip Yang <Philip.Yang@amd.com>
Cc: Sunil Khatri <sunil.khatri@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Philip Yang<Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The CSA and EOP buffers have different alignement requirements.
Hardcode them for now as a bug fix. A proper query will be added in
a subsequent patch.
v2: verify gfx shadow helper callback (Prike)
Fixes: 9e46b8bb05 ("drm/amdgpu: validate userq buffer virtual address and size")
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit refactors the AMDGPU userqueue management subsystem to replace
IDR (ID Allocation) with XArray for improved performance, scalability, and
maintainability. The changes address several issues with the previous IDR
implementation and provide better locking semantics.
Key changes:
1. **Global XArray Introduction**:
- Added `userq_doorbell_xa` to `struct amdgpu_device` for global queue tracking
- Uses doorbell_index as key for efficient global lookup
- Replaces the previous `userq_mgr_list` linked list approach
2. **Per-process XArray Conversion**:
- Replaced `userq_idr` with `userq_mgr_xa` in `struct amdgpu_userq_mgr`
- Maintains per-process queue tracking with queue_id as key
- Uses XA_FLAGS_ALLOC for automatic ID allocation
3. **Locking Improvements**:
- Removed global `userq_mutex` from `struct amdgpu_device`
- Replaced with fine-grained XArray locking using XArray's internal spinlocks
4. **Runtime Idle Check Optimization**:
- Updated `amdgpu_runtime_idle_check_userq()` to use xa_empty
5. **Queue Management Functions**:
- Converted all IDR operations to equivalent XArray functions:
- `idr_alloc()` → `xa_alloc()`
- `idr_find()` → `xa_load()`
- `idr_remove()` → `xa_erase()`
- `idr_for_each()` → `xa_for_each()`
Benefits:
- **Performance**: XArray provides better scalability for large numbers of queues
- **Memory Efficiency**: Reduced memory overhead compared to IDR
- **Thread Safety**: Improved locking semantics with XArray's internal spinlocks
v2: rename userq_global_xa/userq_xa to userq_doorbell_xa/userq_mgr_xa
Remove xa_lock and use its own lock.
v3: Set queue->userq_mgr = uq_mgr in amdgpu_userq_create()
v4: use xa_store_irq (Christian)
hold the read side of the reset lock while creating/destroying queues and the manager data structure. (Chritian)
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
commit 0887054d14 ("drm/amd: Drop abm_level property") dropped the
abm level property in favor of sysfs control. Since then there have
been discussions that compositors showed an interest in modifying
a vendor specific property instead.
So re-introduce the abm level property, but with different semantics.
Rather than being an integer it's now an enum. One of the enum options
is 'sysfs', and that is because there is still a sysfs file for use by
userspace when the compositor doesn't support this property.
If usespace has not modified this property, the default value will
be for sysfs to control it. Once userspace has set the property stop
allowing sysfs control.
The property is only attached to non-OLED eDP panels.
Cc: Xaver Hugl <xaver.hugl@kde.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function amdgpu_virt_get_dynamic_data_info() writes a 64-bit size
value. In two places (amdgpu_bios.c and amdgpu_discovery.c), the code
passed the address of a smaller variable by casting it to u64 *, which
is unsafe.
This could make the function write more bytes than the smaller variable
can hold, possibly overwriting nearby memory. Reported by static
analysis tools.
v2: Dynamic region size comes from the host (SR-IOV setup) and is always
fixed to 5 MB. (Lijo/Ellen)
5 MB easily fits inside a 32-bit value, so using a 64-bit type is not
needed. It also avoids extra type casts
Fixes: b4a8fcc782 ("drm/amdgpu: Add logic for VF ipd and VF bios to init from dynamic crit_region offsets")
Reported by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Ellen Pan <yunru.pan@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Due to low memory or when num of pages is too big to be
accomodated, allocation could fail for pfn's.
Chekc hmm_pfns for NULL before calling the kvfree for the it.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function amdgpu_virt_init_critical_region() contained an invalid
check for a negative init_hdr_offset value:
if (init_hdr_offset < 0)
Since init_hdr_offset is an unsigned 32-bit integer, this condition can
never be true and triggers a Smatch warning:
warn: unsigned 'init_hdr_offset' is never less than zero
In addition, the subsequent bounds check: if ((init_hdr_offset +
init_hdr_size) > vram_size) was vulnerable to integer overflow when
adding the two unsigned values. Thus, by promoting offset and size to
64-bit and using check_add_overflow() to safely validate the sum against
VRAM size.
Fixes: 07009df649 ("drm/amdgpu: Introduce SRIOV critical regions v2 during VF init")
Reported by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Ellen Pan <yunru.pan@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Ellen Pan <yunru.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The amdgpu_userq_buffer_va_list_del() function frees "va_cursor" but it
is dereferenced on the next line when we print the debug message. Print
the debug message first and then free it.
Fixes: 2a28f9665d ("drm/amdgpu: track the userq bo va for its obj management")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Display uniras version in sysfs version interface
when uniras enable.
v2: display ras version detail info
Signed-off-by: Jinzhou Su <jinzhou.su@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Query the sub-revision field in the IP Discovery table for the VFs
to obtain their revision ID.
Meanwhile, read the revision ID from the strap register for the PF.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Newer VPE microcode has functionality that will decrease DPM level
only when a workload has run for 2 or more seconds. If VPE is turned
off before this DPM decrease and the PMFW doesn't reset it when
power gating VPE, the SOC can get stuck with a higher DPM level.
This can happen from amdgpu's ring buffer test because it's a short
quick workload for VPE and VPE is turned off after 1s.
[How]
In idle handler besides checking fences are drained check PMFW version
to determine if it will reset DPM when power gating VPE. If PMFW will
not do this, then check VPE DPM level. If it is not DPM0 reschedule
delayed work again until it is.
v2: squash in return fix (Alex)
Cc: Peyton.Lee@amd.com
Reported-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Sultan Alsawaf <sultan@kerneltoast.com>
Tested-by: Sultan Alsawaf <sultan@kerneltoast.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4615
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm-misc-next for v6.19:
UAPI Changes:
Cross-subsystem Changes:
- fbcon cleanups.
- Make drivers depend on FB_TILEBLITTING instead of selecting it,
and hide FB_MODE_HELPERS.
Core Changes:
- More preparations for rust.
- Throttle dirty worker with vblank
- Use drm_for_each_bridge_in_chain_scoped in drm's bridge code and
assorted fixes.
- Ensure drm_client_modeset tests are enabled in UML.
- Rename ttm_bo_put to ttm_bo_fini, as a further step in removing the
TTM bo refcount.
- Add POST_LT_ADJ_REQ training sequence.
- Show list of removed but still allocated bridges.
- Add a simulated vblank interrupt for hardware without it,
and add some helpers to use them in vkms and hypervdrm.
Driver Changes:
- Assorted small fixes, cleanups and updates to host1x, tegra,
panthor, amdxdna, gud, vc4, ssd130x, ivpu, panfrost, panthor,
sysfb, bridge/sn65dsi86, solomon, ast, tidss.
- Convert drivers from using .round_rate() to .determine_rate()
- Add support for KD116N3730A07/A12, chromebook mt8189, JT101TM023,
LQ079L1SX01, raspberrypi 5" panels.
- Improve reclocking on tegra186+ with nouveau.
- Improve runtime pm in amdxdna.
- Add support for HTX_PAI in imx.
- Use a helper to calculate dumb buffer sizes in most drivers.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/b412fb91-8545-466a-8102-d89c0f2758a7@linux.intel.com
1. Added VF logic in amdgpu_virt to init IP discovery using the offsets from dynamic(v2) critical regions;
2. Added VF logic in amdgpu_virt to init bios image using the offsets from dynamic(v2) critical regions;
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- During guest driver init, asa VFs receive PF msg to
init dynamic critical region(v2), VFs reuse fw_vram_usage_*
from ttm to store critical region tables in a 5MB chunk.
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Introduced amdgpu_virt_init_critical_region during VF init.
- VFs use init_data_header_offset and init_data_header_size_kb
transmitted via PF2VF mailbox to fetch the offset of
critical regions' offsets/sizes in VRAM and save to
adev->virt.crit_region_offsets and adev->virt.crit_region_sizes_kb.
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Added enum amd_sriov_crit_region_version to support multi versions
2. Added logic in SRIOV mailbox to regonize crit_region version during
req_gpu_init_data
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are many set but not used warnings under drivers/gpu/drm/amd when
compiling with the latest upstream mainline GCC:
drivers/gpu/drm/amd/amdgpu/amdgpu_gart.c:305:18: warning: variable ‘p’ set but not used [-Wunused-but-set-variable=]
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.h:103:26: warning: variable ‘internal_reg_offset’ set but not used [-Wunused-but-set-variable=]
...
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.h:164:26: warning: variable ‘internal_reg_offset’ set but not used [-Wunused-but-set-variable=]
...
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:445:13: warning: variable ‘pipe_idx’ set but not used [-Wunused-but-set-variable=]
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:875:21: warning: variable ‘pipe_idx’ set but not used [-Wunused-but-set-variable=]
Remove the variables actually not used or add __maybe_unused attribute for
the variables actually used to fix them, compile tested only.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's possible that unit_num is larger than 0 but save_count is zero,
since we do get bad page address but the address is invalid. Check
unit_num and save_count together.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Candice Li <candice.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add kernel docs for the functions related to hmm_range.
Documents added for functions:
amdgpu_hmm_range_valid
amdgpu_hmm_range_alloc
amdgpu_hmm_range_free
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently SRIOV runtime will use kiq to write HDP_MEM_FLUSH_CNTL for
hdp flush. This register need to be write from CPU for nbif to aware,
otherwise it will not work.
Implement amdgpu_kiq_hdp_flush and use kiq to do gpu hdp flush during
sriov runtime.
v2:
- fallback to amdgpu_asic_flush_hdp when amdgpu_kiq_hdp_flush failed
- add function amdgpu_mes_hdp_flush
v3:
- changed returned error
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
