Wire up the conversions and strings for the new MMIO_REMAP placement:
* amdgpu_mem_type_to_domain() maps AMDGPU_PL_MMIO_REMAP -> domain
* amdgpu_bo_placement_from_domain() accepts the new domain
* amdgpu_bo_mem_stats_placement() and amdgpu_bo_print_info() report it
* res cursor supports the new placement
* fdinfo prints "mmioremap" for the new placement
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce a kernel-internal TTM placement type AMDGPU_PL_MMIO_REMAP
for the HDP flush MMIO remap page
Plumbing added:
- amdgpu_res_cursor.{first,next}: treat MMIO_REMAP like DOORBELL
- amdgpu_ttm_io_mem_reserve(): return BAR bus address + offset
for MMIO_REMAP, mark as uncached I/O
- amdgpu_ttm_io_mem_pfn(): PFN from register BAR
- amdgpu_res_cpu_visible(): visible to CPU
- amdgpu_evict_flags()/amdgpu_bo_move(): non-migratable
- amdgpu_ttm_tt_pde_flags(): map as SYSTEM
- amdgpu_bo_mem_stats_placement(): report AMDGPU_PL_MMIO_REMAP
- amdgpu_fdinfo: print “mmioremap” bucket label
Cc: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no reason to require this to happen on first submitted IB only.
We need to wait for the queue to be idle, but it can be done at any
time (including when there are multiple video sessions active).
Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There can be multiple engine info packages in one IB and the first one
may be common engine, not decode/encode.
We need to parse the entire IB instead of stopping after finding first
engine info.
Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will help on validating the userq input args, and
rejecting for the invalid userq request at the IOCTLs
first place.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a new GEM domain bit AMDGPU_GEM_DOMAIN_MMIO_REMAP to allow
userspace to request the MMIO remap (HDP flush) page via GEM_CREATE.
- include/uapi/drm/amdgpu_drm.h:
* define AMDGPU_GEM_DOMAIN_MMIO_REMAP
* include the bit in AMDGPU_GEM_DOMAIN_MASK
v2: Add early reject in amdgpu_gem_create_ioctl() (Alex).
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit b61badd20b ("drm/amdgpu: fix usage slab after free")
reordered when amdgpu_fence_driver_sw_fini() was called after
that patch, amdgpu_fence_driver_sw_fini() effectively became
a no-op as the sched entities we never freed because the
ring pointers were already set to NULL. Remove the NULL
setting.
Reported-by: Lin.Cao <lincao12@amd.com>
Cc: Vitaly Prosyak <vitaly.prosyak@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Fixes: b61badd20b ("drm/amdgpu: fix usage slab after free")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current mem limit check leaks some GTT memory (reserved_for_pt
reserved_for_ras + adev->vram_pin_size) for small APUs.
Since carveout VRAM is tunable on APUs, there are three case
regarding the carveout VRAM size relative to GTT:
1. 0 < carveout < gtt
apu_prefer_gtt = true, is_app_apu = false
2. carveout > gtt / 2
apu_prefer_gtt = false, is_app_apu = false
3. 0 = carveout
apu_prefer_gtt = true, is_app_apu = true
It doesn't make sense to check below limitation in case 1
(default case, small carveout) because the values in the below
expression are mixed with carveout and gtt.
adev->kfd.vram_used[xcp_id] + vram_needed >
vram_size - reserved_for_pt - reserved_for_ras -
atomic64_read(&adev->vram_pin_size)
gtt: kfd.vram_used, vram_needed, vram_size
carveout: reserved_for_pt, reserved_for_ras, adev->vram_pin_size
In case 1, vram allocation will go to gtt domain, skip vram check
since ttm_mem_limit check already cover this allocation.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fa7c99f04f)
Some PSPv11 SOCs take a longer time for PSP based mode-1 reset. Instead
of checking for C2PMSG_33 status, add the callback wait_for_bootloader.
Wait for bootloader to be back to steady state is already part of the
generic mode-1 reset flow. Increase the retry count for bootloader wait
and also fix the mask to prevent fake pass.
Fixes: 8345a71fc5 ("drm/amdgpu: Add more checks to PSP mailbox")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4531
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 32f73741d6)
The copy_to_user() function returns the number of bytes that it wasn't
able to copy, but we should return -EFAULT to the user.
Fixes: 4d82724f7f ("drm/amdgpu: Add mapping info option for GEM_OP ioctl")
Fixes: f9db1fc52c ("drm/amdgpu: Add ioctl to get all gem handles for a process")
Reviewed-By: David Francis <David.Francis@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The header comment above amdgpu_gem_list_handles_ioctl referenced
drm_amdgpu_gem_list_handles_ioctl. Update the comment to reflect the
actual function identifier to avoid misleading prototype warnings.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c:1106: warning: expecting prototype for drm_amdgpu_gem_list_handles_ioctl(). Prototype was for amdgpu_gem_list_handles_ioctl() instead
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print PD address of VM root instead of GPU address in the debugfs.
On modern GPU's this is what UMR tool expects in the registers
as well.
Fixes: 719b378d37 ("drm/amdgpu: add debugfs support for VM pagetable per client")
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a detect and reset callback and add the implementation
for mes. The callback will detect all hung queues of a
particular ip type (e.g., GFX or compute or SDMA) and
reset them.
v2: increase reset counter and set fence force completion
v3: Removed userq_mutex in mes_userq_detect_and_reset since the driver holds it when calling
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some SOCs which are part of the cyan skillfish family
rely on an explicit firmware for IP discovery. Add support
for the gpu_info firmware.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Align the function headers for `amdgpu_max_hdmi_pixel_clock` and
`amdgpu_connector_dvi_mode_valid` with the function implementations so
they match the expected kdoc style.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c:1199: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Returns the maximum supported HDMI (TMDS) pixel clock in KHz.
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c:1212: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Validates the given display mode on DVI and HDMI connectors.
Fixes: 585b2f685c ("drm/amdgpu: Respect max pixel clock for HDMI and DVI-D (v2)")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current mem limit check leaks some GTT memory (reserved_for_pt
reserved_for_ras + adev->vram_pin_size) for small APUs.
Since carveout VRAM is tunable on APUs, there are three case
regarding the carveout VRAM size relative to GTT:
1. 0 < carveout < gtt
apu_prefer_gtt = true, is_app_apu = false
2. carveout > gtt / 2
apu_prefer_gtt = false, is_app_apu = false
3. 0 = carveout
apu_prefer_gtt = true, is_app_apu = true
It doesn't make sense to check below limitation in case 1
(default case, small carveout) because the values in the below
expression are mixed with carveout and gtt.
adev->kfd.vram_used[xcp_id] + vram_needed >
vram_size - reserved_for_pt - reserved_for_ras -
atomic64_read(&adev->vram_pin_size)
gtt: kfd.vram_used, vram_needed, vram_size
carveout: reserved_for_pt, reserved_for_ras, adev->vram_pin_size
In case 1, vram allocation will go to gtt domain, skip vram check
since ttm_mem_limit check already cover this allocation.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for forcing completion of userq fences.
This is needed for userq resets and asic resets so that we
can set the error on the fence and force completion.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Helper function to detect and reset hung queues. MES will
return an array of doorbell indices of which queues are hung
and were optionally reset.
v2: Clear the doorbell array before detection
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit implements the actual MES (Micro Engine Scheduler) suspend
and resume gang operations for version 12 hardware. Previously these
functions were just stubs returning success.
v2: Always use AMDGPU_MES_SCHED_PIPE
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Add two new function pointers to struct amdgpu_userq_funcs:
- preempt: To handle preemption of user mode queues
- restore: To restore preempted user mode queues
These callbacks will allow the driver to properly manage queue
preemption and restoration when needed, such as during context
switching or priority changes.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add more information in the debugfs which is needed to dump
a pagetable correctly for userqueues where vmid is not known
in the kernel.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct valid_bits and ms_chk_bits of section info field for bad page
threshold exceed CPER to match OOB's behavior.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ternary operators in the form of "a ? false : true", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ternary operators in the form of "a ? false : true", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ternary operators in the form of "a ? false : true", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ternary operators in the form of "a ? false : true", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently the error check from the call to mes_v12_inv_tlb_convert_hub_id
is always false because a uint32_t struct field hub_id is being used to
to perform the less than zero error check. Fix this by using the int
variable ret to perform the check.
Fixes: 87e6505261 ("drm/amd/amdgpu : Use the MES INV_TLBS API for tlb invalidation on gfx12")
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm-misc-next for v6.18:
Cross-subsystem Changes:
- Update a number of DT bindings for STM32MP25 Arm SoC
Core Changes:
gem:
- Simplify locking for GPUVM
panel-backlight-quirks:
- Add additional quirks for EDID, DMI, brightness
sched:
- Fix race condition in trace code
- Clean up
sysfb:
- Clean up
Driver Changes:
amdgpu:
- Give kernel jobs a unique id for better tracing
amdxdna:
- Improve error reporting
bridge:
- Improve ref counting on bridge management
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
gud:
- Replace simple-KMS pipe with regular atomic helpers
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
ivpu:
- Clean up
nouveau:
- Improve error reporting
panthor:
- Fail VM bind if BO has offset
- Clean up
rcar-du:
- Make number of lanes configurable
rockchip:
- Add support for RK3588 DPTX output
rocket:
- Use kfree() and sizeof() correctly
- Test DMA status
- Clean up
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
- Clean up
stm:
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
tidss:
- Convert to kernel's FIELD_ macros
v3d:
- Improve job management and locking
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250904090932.GA193997@linux.fritz.box
Currently the kzalloc failure check just sets reports the failure
and sets the variable ret to -ENOMEM, which is not checked later
for this specific error. Fix this by just returning -ENOMEM rather
than setting ret.
Fixes: 4fb9307154 ("drm/amd/amdgpu: remove redundant host to psp cmd buf allocations")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1ee9d1a096)
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declarations to the end of the corresponding
structures. Notice that `struct dev_pagemap` is a flexible structure,
this is a structure that contains a flexible-array member.
struct dev_pagemap always has room for at least one range. amdgpu only
uses a single range. Therefore no change are needed to the allocation
of struct amdgpu_device.
Fix 283 of the following type of warnings:
283 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h:111:28: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently the kzalloc failure check just sets reports the failure
and sets the variable ret to -ENOMEM, which is not checked later
for this specific error. Fix this by just returning -ENOMEM rather
than setting ret.
Fixes: 4fb9307154 ("drm/amd/amdgpu: remove redundant host to psp cmd buf allocations")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These fields were only used by si_dpm and are not necessary
anymore. They also may have been incorrect because:
- wm_high was set to the LOW_WATERMARK field of watermark A.
- wm_low was not set on DCE 6 and was always zero.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unlike later versions, UVD 3 has firmware validation.
For this to work, the UVD should be powered up correctly.
When DPM is enabled and the display clock is off,
the SMU may choose a power state which doesn't power
the UVD, which can result in failure to initialize UVD.
v2:
Add code comments to explain about the UVD power state
and how UVD clock is turned on/off.
Fixes: b38f3e80ec ("drm amdgpu: SI UVD v3_1 (v2)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new ioctl DRM_IOCTL_AMDGPU_GEM_LIST_HANDLES.
This ioctl returns a list of bos with their handles, sizes,
and flags and domains.
This ioctl is meant to be used during CRIU checkpoint and
provide information needed to reconstruct the bos
in CRIU restore.
Userspace for this and the next change can be found at
https://github.com/checkpoint-restore/criu/pull/2613
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
