This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Pull x86 platform driver updates from Ilpo Järvinen:
"Highlights:
- amd/pmf:
- Avoid overwriting BIOS input values when events occur rapidly
- Fix PMF driver issues related to S4 (in part on crypto/ccp side)
- Add NPU metrics API (for accel side consumers)
- Allow disabling Smart PC function through a module parameter
- asus-wmi & HID/asus:
- Unification of backlight control (replaces quirks)
- Support multiple interfaces for controlling keyboard/RGB brightness
- Simplify init sequence
- hp-wmi:
- Add manual fan control for Victus S models
- Add fan mode keep-alive
- Fix platform profile values for Omen 16-wf1xxx
- Add EC offset to get the thermal profile
- intel/pmc: Show substate residencies also for non-primary PMCs
- intel/ISST:
- Store and restore data for all domains
- Write interface improvements
- lenovo-wmi:
- Support multiple Capability Data
- Add HWMON reporting and tuning support
- mellanox/mlx-platform: Add HI173 & HI174 support
- surface/aggregator_registry: Add Surface Pro 11 (QCOM)
- thinkpad_acpi: Add support for HW damage detection capability
- uniwill: Implement cTGP setting
- wmi:
- Introduce marshalling support
- Convert a few drivers to use the new buffer-based WMI API
- tools/power/x86/intel-speed-select: Allow read operations for non-root
- Miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (68 commits)
platform/x86: lenovo-wmi-{capdata,other}: Fix HWMON channel visibility
platform/x86: hp-wmi: Add EC offsets to read Victus S thermal profile
platform: mellanox: mlx-platform: Add support DGX flavor of next-generation 800GB/s ethernet switch.
platform: mellanox: mlx-platform: Add support for new Nvidia DGX system based on class VMOD0010
HID: asus: add support for the asus-wmi brightness handler
platform/x86: asus-wmi: add keyboard brightness event handler
platform/x86: asus-wmi: remove unused keyboard backlight quirk
HID: asus: listen to the asus-wmi brightness device instead of creating one
platform/x86: asus-wmi: Add support for multiple kbd led handlers
HID: asus: early return for ROG devices
HID: asus: move vendor initialization to probe
HID: asus: fortify keyboard handshake
HID: asus: use same report_id in response
HID: asus: initialize additional endpoints only for certain devices
HID: asus: simplify RGB init sequence
platform/wmi: string-kunit: Add missing oversized string test case
platform/x86/amd/pmf: Added a module parameter to disable the Smart PC function
platform/x86/uniwill: Implement cTGP setting
platform/x86: uniwill-laptop: Introduce device descriptor system
platform/x86/amd: Use scope-based cleanup for wbrf_record()
...
The current implementation for Victus S thermal profiles only supports
setting the profile. The driver was missing the logic to read the
hardware state, meaning it would default to "Balanced" on driver load,
overriding the currently active profile. Furthermore, the driver could
not detect if the firmware reset the profile on a power source change.
Statically store the known EC offsets for reading thermal profile in the
new .ec_tp_offset field of struct thermal_profile_params. Implement
platform_profile_victus_s_get_ec() to use this offset to read the real
hardware state. Additionally, update the power source event notifier to
use the actual hardware state when re-triggering CPU power limits
actualization.
Testing on HP Omen 16-wf1xxx (board ID 8C78) confirmed that the thermal
profile is now persistent across driver loads and power source change
events.
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260121182858.66363-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The GET_INSTANCE_ID macro that caused a kernel panic when accessing sysfs
attributes:
1. Off-by-one error: The loop condition used '<=' instead of '<',
causing access beyond array bounds. Since array indices are 0-based
and go from 0 to instances_count-1, the loop should use '<'.
2. Missing NULL check: The code dereferenced attr_name_kobj->name
without checking if attr_name_kobj was NULL, causing a null pointer
dereference in min_length_show() and other attribute show functions.
The panic occurred when fwupd tried to read BIOS configuration attributes:
Oops: general protection fault [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:min_length_show+0xcf/0x1d0 [hp_bioscfg]
Add a NULL check for attr_name_kobj before dereferencing and corrects
the loop boundary to match the pattern used elsewhere in the driver.
Cc: stable@vger.kernel.org
Fixes: 5f94f181ca ("platform/x86: hp-bioscfg: bioscfg-h")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260115203725.828434-3-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The hp-bioscfg driver attempts to register kobjects with empty names when
the HP BIOS returns attributes with empty name strings. This causes
multiple kernel warnings:
kobject: (00000000135fb5e6): attempted to be registered with empty name!
WARNING: CPU: 14 PID: 3336 at lib/kobject.c:219 kobject_add_internal+0x2eb/0x310
Add validation in hp_init_bios_buffer_attribute() to check if the
attribute name is empty after parsing it from the WMI buffer. If empty,
log a debug message and skip registration of that attribute, allowing the
module to continue processing other valid attributes.
Cc: stable@vger.kernel.org
Fixes: a34fc329b1 ("platform/x86: hp-bioscfg: bioscfg")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260115203725.828434-2-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
HP Omen 16-wf1xxx (board ID 8C78) currently sends the incorrect
Victus-specific thermal profile values via WMI, leading to a logical
inconsistency when switching between platform profiles.
The driver currently uses Victus S values:
0x00 => Balanced / Low-Power
0x01 => Performance
However, Omen Gaming Hub logs / EC register inspection on Windows shows
that this board is intended to use:
0x30 => Balanced / Low-Power
0x31 => Performance
This patch corrects the thermal profile command values to match the
values observed from Omen Gaming Hub logs. The performance benchmarks
and peak power draw (from both CPU and GPU) show no observable change
with this correction (suggesting that the firmware is currently tolerant
of the incorrect values). However sending the correct values prevents
potential regressions after future firmware updates.
Refactor victus_s_thermal_profile_boards from a list of strings to a
dmi_system_id table and move the lookup to module init. The new struct
thermal_profile_params is used to store board-specific WMI parameters,
allowing the driver to cache these values in a static pointer. This
avoids repeated DMI string comparisons and allows marking of DMI table as
__initconst.
Testing on HP Omen 16-wf1xxx (board 8C78) confirmed WMI codes 0x30/0x31
are now sent, resolving the logical inconsistency and ensuring the value
visible in EC registers match the Windows state for this profile.
Fixes: fb146a38cb ("platform/x86: hp-wmi: Add Omen 16-wf1xxx fan support")
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260113182604.115211-2-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The firmware on some HP laptops automatically reverts the fan speed
control to "Auto" mode after a 120 second timeout window.
To ensure that the user-selected fan profile (Max/Manual) persists,
implement a keep-alive mechanism that periodically refreshes the fan
mode trigger before the timeout occurs.
- Introduce a delayed workqueue to trigger the fan mode refresh every 90
seconds, ensuring the system maintains the correct fan mode setting.
- Integrate the refresh mechanism into hp_wmi_apply_fan_settings() to
start, update or cancel the keep-alive process based on the current
fan mode.
This ensures that the driver stays in sync with the hardware.
Tested on: HP Omen 16-wf1xxx (board ID 8C78)
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260113123738.222244-4-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add manual fan speed control and PWM reporting for HP Victus S-series
laptops.
While HPWMI_FAN_SPEED_SET_QUERY was previously added to reset max fan
mode, it is actually capable of individual fan control. This patch
implements hp_wmi_fan_speed_set() to allow manual control and hides
PWM inputs for non-Victus devices as the query is Victus specific.
The existing hp_wmi_fan_speed_max_get() query is unreliable on Victus S
firmware, often incorrectly reporting "Auto" mode even when "Max" is
active. To resolve this synchronization issue, move state tracking to
a per-device private context and apply "Auto" mode during driver
initialization to ensure a consistent starting point.
Refactor hp_wmi_apply_fan_settings() to use an intermediate ret
variable. This prepares the switch block for keep-alive logic being
added in a later patch, avoiding the need for duplicated mode check.
Tested on: HP Omen 16-wf1xxx (board ID 8C78)
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260113123738.222244-3-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The hp_populate_*_elements_from_package() functions in the hp-bioscfg
driver contain out-of-bounds array access vulnerabilities.
These functions parse ACPI packages into internal data structures using
a for loop with index variable 'elem' that iterates through
enum_obj/integer_obj/order_obj/password_obj/string_obj arrays.
When processing multi-element fields like PREREQUISITES and
ENUM_POSSIBLE_VALUES, these functions read multiple consecutive array
elements using expressions like 'enum_obj[elem + reqs]' and
'enum_obj[elem + pos_values]' within nested loops.
The bug is that the bounds check only validated elem, but did not consider
the additional offset when accessing elem + reqs or elem + pos_values.
The fix changes the bounds check to validate the actual accessed index.
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: e6c7b3e155 ("platform/x86: hp-bioscfg: string-attributes")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB788173D7DD4EA2CB6383683DAFB0A@SYBPR01MB7881.ausprd01.prod.outlook.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The hp-wmi driver has a number of arrays that are getting new entries
and all/most entries have been added to the end of the array. As a
result, the numerical order is mixed up in a few entries.
Reorder the array entries. Split lines for each two leading chars to
make the arrays easier to read.
Add also trailing commas.
Link: https://patch.msgid.link/20251128120215.4450-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The newer HP Omen laptops, such as Omen 16-wf1xxx, use the same
WMI-based thermal profile interface as Victus 16-r1000 and 16-s1000
models.
Add the DMI board name "8C78" to the victus_s_thermal_profile_boards
list to enable proper fan and thermal mode control.
Tested on: HP Omen 16-wf1xxx (board 8C78)
Result:
* Fan RPMs are readable
* echo 0 | sudo tee /sys/devices/platform/hp-wmi/hwmon/*/pwm1_enable
allows the fans to run on max RPM.
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20251018111001.56625-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The following patch adds support for HP Victus 16-s1000 laptop series,
by adding and fixing the following functionalities, which can be
accessed through hwmon and platform_profile sysfs:
- Functional measured fan speed reading
- Ability to enable and disable maximum fan speed
- Platform profiles full setting ability for CPU and GPU
It sets appropriates CPU and GPU power settings both on AC and battery
power sources, for low-power, balanced and performance modes.
It has been thoroughly tested on a 16-s1034nf laptop based on a 8C9C DMI
board name, and behavior of the driver on previous boards is left
untouched thanks to the separated lists of DMI board names.
Signed-off-by: Julien ROBIN <julien.robin28@free.fr>
Link: https://lore.kernel.org/r/1c00f906-8500-41d5-be80-f9092b6a49f1@free.fr
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently the platform filter cannot access any driver-specific state
which forces drivers installing a i8042 filter to have at least some
kind of global pointer for their filter.
Allow callers of i8042_install_filter() to submit a context pointer
which is then passed to the i8042 filter. This frees drivers from the
responsibility of having to manage this global pointer themself.
Also introduce a separate type for the i8042 filter (i8042_filter_t)
so that the function definitions can stay compact.
Tested on a Dell Inspiron 3505.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250113221314.435812-1-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP OMEN 8 (2022), corresponding to a board ID of 8A15, supports OMEN
thermal profile and requires the timed profile quirk.
Upon adding this ID to both the omen_thermal_profile_boards and
omen_timed_thermal_profile_boards, significant bump in performance can be
observed. For instance, SilverBench (https://silver.urih.com/) results
improved from ~56,000 to ~69,000, as a result of higher power draws (and
thus core frequencies) whilst under load:
Package Power:
- Before the patch: ~65W (dropping to about 55W under sustained load).
- After the patch: ~115W (dropping to about 105W under sustained load).
Core Power:
- Before: ~60W (ditto above).
- After: ~108W (ditto above).
Add 8A15 to omen_thermal_profile_boards and
omen_timed_thermal_profile_boards to improve performance.
Signed-off-by: Xi Xiao <1577912515@qq.com>
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Link: https://lore.kernel.org/r/20241226062207.3352629-1-jeffbai@aosc.io
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Pull x86 platform driver updates from Ilpo Järvinen:
- alienware WMAX thermal interface support
- Split ACPI and platform device based amd/hsmp drivers
- AMD X3D frequency/cache mode switching support
- asus thermal policy fixes
- Disable C1 auto-demotion in suspend to allow entering the deepest
C-states
- Fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1
- Replace intel_scu_ipc "workaround" with 32-bit IO
- Correct *_show() function error handling in panasonic-laptop
- Gemini Lake P2SB devfn correction
- think-lmi Admin/System certificate authentication support
- Disable WMI devices for shutdown, refactoring continues
- Vexia EDU ATLA 10 tablet support
- Surface Pro 9 5G (Arm/QCOM) support
- Misc cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (69 commits)
platform/x86: p2sb: Cache correct PCI bar for P2SB on Gemini Lake
platform/x86: panasonic-laptop: Return errno correctly in show callback
Documentation: alienware-wmi: Describe THERMAL_INFORMATION operation 0x02
alienware-wmi: create_thermal_profile() no longer brute-forces IDs
alienware-wmi: Adds support to Alienware x17 R2
alienware-wmi: extends the list of supported models
alienware-wmi: order alienware_quirks[] alphabetically
platform/x86/intel/pmt: allow user offset for PMT callbacks
platform/x86/amd/hsmp: Change the error type
platform/x86/amd/hsmp: Add new error code and error logs
platform/x86/amd: amd_3d_vcache: Add sysfs ABI documentation
platform/x86/amd: amd_3d_vcache: Add AMD 3D V-Cache optimizer driver
intel-hid: fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1
platform/x86/amd/hsmp: mark hsmp_msg_desc_table[] as maybe_unused
platform/x86: asus-wmi: Use platform_profile_cycle()
platform/x86: asus-wmi: Fix inconsistent use of thermal policies
platform/x86: hp: hp-bioscfg: remove redundant if statement
MAINTAINERS: Update ISHTP ECLITE maintainer entry
platform/x86: x86-android-tablets: Add support for Vexia EDU ATLA 10 tablet
platform/x86: x86-android-tablets: Add support for getting i2c_adapter by PCI parent devname()
...
The embedded controller code is mainly used on x86 laptops and cannot
work without PC style I/O port access.
Make this a user-visible configuration option that is default enabled
on x86 but otherwise disabled, and that can never be enabled unless
CONFIG_HAS_IOPORT is also available.
The empty stubs in internal.h help ignore the EC code in configurations
that don't support it. In order to see those stubs, the sbshc code also
has to include this header and drop duplicate declarations.
All the direct callers of ec_read/ec_write already had an x86
dependency and now also need to depend on APCI_EC.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241011061948.3211423-1-arnd@kernel.org
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/platform/x86/ to use
.remove(), with the eventual goal to drop struct
platform_driver::remove_new(). As .remove() and .remove_new() have the
same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
While touching these files, make indention of the struct initializer
consistent in several files.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241017073802.53235-2-u.kleine-koenig@baylibre.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The current legacy WMI handlers are susceptible to picking up wrong
WMI event data on systems where different WMI devices share some
notification IDs.
Prevent this by letting the WMI driver core taking care of retrieving
the event data. This also simplifies the legacy WMI handlers and their
implementation inside the WMI driver core.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240901031055.3030-3-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fix a platform profile option switch/getter bug on some Omen and Victus
laptops dismissing userspace choice when selecting performance mode in
inadequate conditions (e.g. by being disconnected from the AC power plug)
by
- hooking an ACPI notify handler through the
omen_register_powersource_event_handler method that listens to AC
power source changes (plugging in/out the AC power plug)
- keeping an intermediate active_platform_profile variable that is
set when userspace changes the platform profile setting
- restoring the selected platform profile kept in
active_platform_profile when AC power is plugged back into the
laptop through the power_supply_is_system_supplied call check,
unless if the user decided to alter the platform profile mid-way
Add a dependency to the POWER_SUPPLY subsystem to be able to check for
power_supply_is_system_supplied.
Introduce intermediary functions to leverage platform profile <->
internal thermal profile translation code from platform_profile_omen_set
and callers.
These changes makes the module compliant with the principles defined in
the Platform Profile Selection page of the Kernel documentation on those
kind of laptops; which is to not "(...) let userspace know about any
sub-optimal conditions which are impeding reaching the requested
performance level".
Since the Omen and Victus laptops share the same embedded controller
system, the fix is applicable to both categories of laptops.
Signed-off-by: Alexis Belmonte <alexbelm48@gmail.com>
Link: https://lore.kernel.org/r/Zovh22-7B1jI7sfF@alexis-pc
[ij: Made active_platform_profile_lock static]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add 8BAD to the list of boards which have thermal profile selection
available. This allows the CPU to draw more power than the default TDP
barrier defined by the 'balanced' thermal profile (around 50W), hence
allowing it to perform better without being throttled by the embedded
controller (around 130W).
We first need to set the HP_OMEN_EC_THERMAL_PROFILE_TIMER_OFFSET to zero.
This prevents the timer countdown from reaching zero, making the embedded
controller "force-switch" the system's thermal profile back to 'balanced'
automatically.
We also need to put a number of specific flags in
HP_OMEN_EC_THERMAL_PROFILE_FLAGS_OFFSET when we're switching to another
thermal profile:
- for 'performance', we need to set both HP_OMEN_EC_FLAGS_TURBO and
HP_OMEN_EC_FLAGS_NOTIMER;
- for 'balanced' and 'powersave', we clear out the register to notify
the system that we want to lower the TDP barrier as soon as possible.
The third flag defined in the hp_thermal_profile_omen_flags enum,
HP_OMEN_EC_FLAGS_JUSTSET, is present for completeness.
To prevent potential behaviour breakage with other Omen models, a
separate omen_timed_thermal_profile_boards array has been added to list
which boards expose this behaviour.
Performance benchmarking was done with the help of silver.urih.com and
Google Chrome 120.0.6099.129, on Gnome 45.2, with the 'performance'
thermal profile set:
| | Performance | Stress | TDP |
|------------------|-------------|------------|-------|
| with my patch | P84549 | S0.1891 | 131W |
| without my patch | P44084 | S0.1359 | 47W |
The TDP measurements were done with the help of the s-tui utility,
during the load.
There is still work to be done:
- tune the CPU and GPU fans to better cool down and enhance
performance at the right time; right now, it seems that the fans are
not properly reacting to thermal/performance events, which in turn
either causes thermal throttling OR makes the fans spin way too long,
even though the temperatures have lowered down
- expose the CPU and GPU fan curves to user-land so that they can be
controlled just like what the Omen Gaming Hub utility proposes to
its users;
Signed-off-by: Alexis Belmonte <alexbelm48@gmail.com>
Link: https://lore.kernel.org/r/ZbucvX2rRdqRgtcu@alexis-pc
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
