[why]
pm sysfs should be writable in one VF mode as is in passthrough
[how]
do not remove write access on pm sysfs if device is in one VF mode
Fixes: 11c9cc95f8 ("amdgpu/pm: Make sysfs pm attributes as read-only for VFs")
Signed-off-by: Yiqing Yao <yiqing.yao@amd.com>
Reviewed-by: Monk Liu <Monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For Some ASICs, with the PMFW default settings, we may see the
power consumption reported via metrics table is "Very Erratic".
With the socket power alpha filter set as 10/100ms, we can correct
that issue.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang static analysis reports this problem
amdgpu_ctx.c:616:26: warning: Assigned value is garbage
or undefined
args->out.pstate.flags = stable_pstate;
^ ~~~~~~~~~~~~~
amdgpu_ctx_stable_pstate can fail without setting
stable_pstate. So check.
Fixes: 8cda7a4f96 ("drm/amdgpu/UAPI: add new CTX OP to get/set stable pstates")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For DCN3/3.01/3.02 at least these use the fpu.
v2: squash in build fix for when DCN is not enabled (Leo)
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In LTTPR non-transparent mode, we need
to reset the cached lane settings before performing
link training on the next PHY repeater. Otherwise,
the cached lane settings will be used for the next
clock recovery e.g. VS = MAX (3) which should not be
the case according to the DP specs. We expect to use
minimum lane settings on each clock recovery sequence.
[how]
Reset DPCD and HW lane settings on each repeater LT.
Set training pattern to 0 for the repeater that failed LT
at the proper place.
Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The KFD only unmaps all queues, all dynamics queues or all process queues
since RUN_LIST is mapped with all KFD queues.
There's no need to provide a single type unmap so remove this option.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch handles the GPU recovery failure in sriov environment by
retrying the reset if the first reset fails. To determine the condition
of retry, a new macro AMDGPU_RETRY_SRIOV_RESET is added which returns
true if failure is due to ETIMEDOUT, EINVAL or EBUSY, otherwise return
false.A new macro AMDGPU_MAX_RETRY_LIMIT is used to limit the retry to 2.
It also handles the return status in Post Asic Reset by updating the return
code with asic_reset_res and eventually return the return code in
amdgpu_job_timedout().
Signed-off-by: Surbhi Kakarya <surbhi.kakarya@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Merge amdgpu_ras_late_init to
amdgpu_ras_block_late_init.
2. Remove amdgpu_ras_late_init since no ras block
calls amdgpu_ras_late_init.
3. Merge amdgpu_ras_late_fini to
amdgpu_ras_block_late_fini.
4. Remove amdgpu_ras_late_fini since no ras block
calls amdgpu_ras_late_fini.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In order to reduce redundant struct conversion, modify
operating sysfs and interrupt function interface parameters.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Define amdgpu_ras_block_late_init to create sysfs nodes
and interrupt handles.
2. Define amdgpu_ras_block_late_fini to remove sysfs nodes
and interrupt handles.
3. Replace ras block variable members in struct
amdgpu_ras_block_object with struct ras_common_if, which
can make it easy to associate each ras block instance
with each ras block functional interface.
4. Add .ras_cb to struct amdgpu_ras_block_object.
5. Change each ras block to fit for the changement of struct
amdgpu_ras_block_object.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
rlcg legacy read is not available in SRIOV configration.
Otherwise, gmc_v9_0_flush_gpu_tlb will always complain
timeout and finally breaks driver load.
v2: bypass read in amdgpu_virt_get_rlcg_reg_access_flag (from Victor)
Fixes: 97d1a3b967 ("drm/amdgpu: switch to get_rlcg_reg_access_flag for gfx9")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Victor Skvortsov <Victor.Skvortsov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A bunch of errors and warnings are leftover KFD over the years, attempt
to fix the errors and most warnings reported by checkpatch tool. Still a
few warnings remain which may be false positives so ignore them for now.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add IP discovery data in sysfs. The format is:
/sys/class/drm/cardX/device/ip_discovery/die/D/B/I/<attrs>
where,
X is the card ID, an integer,
D is the die ID, an integer,
B is the IP HW ID, an integer, aka block type,
I is the IP HW ID instance, an integer.
<attrs> are the attributes of the block instance. At the moment these
include HW ID, instance number, major, minor, revision, number of base
addresses, and the base addresses themselves.
A symbolic link of the acronym HW ID is also created, under D/, if you
prefer to browse by something humanly accessible.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Tom StDenis <tom.stdenis@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amd-drm-next-5.18-2022-02-11-1:
amdgpu:
- Clean up of power management code
- Enable freesync video mode by default
- Clean up of RAS code
- Improve VRAM access for debug using SDMA
- Coding style cleanups
- SR-IOV fixes
- More display FP reorg
- TLB flush fixes for Arcuturus, Vega20
- Misc display fixes
- Rework special register access methods for SR-IOV
- DP2 fixes
- DP tunneling fixes
- DSC fixes
- More IP discovery cleanups
- Misc RAS fixes
- Enable both SMU i2c buses where applicable
- s2idle improvements
- DPCS header cleanup
- Add new CAP firmware support for SR-IOV
amdkfd:
- Misc cleanups
- SVM fixes
- CRIU support
- Clean up MQD manager
UAPI:
- Add interface to amdgpu CTX ioctl to request a stable power state for profiling
https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/207
- Add amdkfd support for CRIU
https://github.com/checkpoint-restore/criu/pull/1709
- Remove old unused amdkfd debugger interface
Was only implemented for Kaveri and was only ever used by an old HSA tool that was never open sourced
radeon:
- Fix error handling in radeon_driver_open_kms
- UVD suspend fix
- Misc fixes
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220211220706.5803-1-alexander.deucher@amd.com
Pull char/misc driver fixes from Greg KH:
"Here are a small number of char/misc driver fixes for 5.17-rc4 for
reported issues. They contain:
- phy driver fixes
- iio driver fix
- eeprom driver fix
- speakup regression fix
- fastrpc fix
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
iio: buffer: Fix file related error handling in IIO_BUFFER_GET_FD_IOCTL
speakup-dectlk: Restore pitch setting
bus: mhi: pci_generic: Add mru_default for Cinterion MV31-W
bus: mhi: pci_generic: Add mru_default for Foxconn SDX55
eeprom: ee1004: limit i2c reads to I2C_SMBUS_BLOCK_MAX
misc: fastrpc: avoid double fput() on failed usercopy
phy: dphy: Correct clk_pre parameter
phy: phy-mtk-tphy: Fix duplicated argument in phy-mtk-tphy
phy: stm32: fix a refcount leak in stm32_usbphyc_pll_enable()
phy: xilinx: zynqmp: Fix bus width setting for SGMII
phy: cadence: Sierra: fix error handling bugs in probe()
phy: ti: Fix missing sentinel for clk_div_table
phy: broadcom: Kconfig: Fix PHY_BRCM_USB config option
phy: usb: Leave some clocks running during suspend
Avoid spam the kernel log on application memory allocation failures.
__func__ argument was also removed from dev_fmt macro due to
parameter conflicts with dynamic_dev_dbg.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.comi>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
SDMA ring buffer test failed if suspend is aborted during
S0i3 resume.
[How]
If suspend is aborted for some reason during S0i3 resume
cycle, it follows SDMA ring test failing and errors in amdgpu
resume. For RN/CZN/Picasso, SMU saves and restores SDMA
registers during S0ix cycle. So, skipping SDMA suspend and
resume from driver solves the issue. This time, the system
is able to resume gracefully even the suspend is aborted.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rajib Mahapatra <rajib.mahapatra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
KMD reports a warning on holding a lock from drm_syncobj_find_fence,
when running amdgpu_test case “syncobj timeline test”.
ctx->lock was designed to prevent concurrent "amdgpu_ctx_wait_prev_fence"
calls and avoid dead reservation lock from GPU reset. since no reservation
lock is held in latest GPU reset any more, ctx->lock can be simply removed
and concurrent "amdgpu_ctx_wait_prev_fence" call also can be prevented by
PD root bo reservation lock.
call stacks:
=================
//hold lock
amdgpu_cs_ioctl->amdgpu_cs_parser_init->mutex_lock(&parser->ctx->lock);
…
//report warning
amdgpu_cs_dependencies->amdgpu_cs_process_syncobj_timeline_in_dep \
->amdgpu_syncobj_lookup_and_add_to_sync -> drm_syncobj_find_fence \
-> lockdep_assert_none_held_once
…
amdgpu_cs_ioctl->amdgpu_cs_parser_fini->mutex_unlock(&parser->ctx->lock);
Signed-off-by: Ken Xue <Ken.Xue@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(v4)
Modifications to satisfy checkpatch --strict
(v3)
Rewrote patchset to order patches as (API, hw impl, usecase)
- modified amdgpu_get_pp_od_clk_voltage to try
amdgpu_dpm_emit_clock_levels and fallback to
amdgpu_dpm_print_clock_levels if emit is not implemented.
- modified amdgpu_get_pp_dpm_clock to try
amdgpu_dpm_emit_clock_levels and fallback to
amdgpu_dpm_print_clock_levels if emit is not implemented.
- Newline is printed to buf if no output produced
== Test ==
LOGFILE=pp_clk.test.log
AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1`
AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | awk '{print $9}'`
HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON}
lspci -nn | grep "VGA\|Display" > $LOGFILE
FILES="pp_od_clk_voltage
pp_dpm_sclk
pp_dpm_mclk
pp_dpm_pcie
pp_dpm_socclk
pp_dpm_fclk
pp_dpm_dcefclk
pp_dpm_vclk
pp_dpm_dclk "
for f in $FILES
do
echo === $f === >> $LOGFILE
cat $HWMON_DIR/device/$f >> $LOGFILE
done
cat $LOGFILE
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(v4)
Modifications to satisfy checkpatch --strict
(v3)
Rewrote patchset to order patches as (API, hw impl, usecase)
- implement emit_clk_levels for navi10, based on print_clk_levels,
but using sysfs_emit without smu_cmn_get_sysfs() workaround
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang static analysis reports this problem
kfd_chardev.c:2594:16: warning: The expression is an uninitialized value.
The computed value will also be garbage
while (ret && i--) {
^~~
i is a loop variable and this block unwinds a problem in the loop.
When the error happens before the loop, this value is garbage.
Move the initialization of i to its decalaration.
Fixes: be072b06c7 ("drm/amdkfd: CRIU export BOs as prime dmabuf objects")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clang static analysis reports this problem
kfd_chardev.c:2092:2: warning: 1st function call argument
is an uninitialized value
kvfree(bo_privs);
^~~~~~~~~~~~~~~~
When bo_buckets alloc fails, it jumps to an error handler
that frees the yet to be allocated bo_privs. Because
bo_buckets is the first error, return directly.
Fixes: 5ccbb057c0 ("drm/amdkfd: CRIU Implement KFD checkpoint ioctl")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
