Dario Binacchi
b0b255d6b8
dt-bindings: touchscreen: convert eeti bindings to json schema
...
Convert EETI touchscreen controller device tree binding to json-schema.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com >
Reviewed-by: Rob Herring (Arm) <robh@kernel.org >
Link: https://lore.kernel.org/r/20250925153144.4082786-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com >
2025-09-25 11:36:22 -07:00
Frank Li
618f571af6
dt-bindings: input: exc3000: move eeti,egalax_ts from egalax-ts.txt to eeti,exc3000.yaml
...
Remove legacy binding egalax-ts.txt file. And add compatible string
eeti,egalax_ts and wakeup-gpios to eeti,exc3000.yaml. "eeti,egalax_ts" is
general compatible string, which is not preferred. But it is compatible
with old devices (older than 10 years) and existing driver in
drivers/input/touchscreen/egalax_ts.c.
Allow address 0x4 for eeti,egalax_ts.
Don't require touchscreen-size-x(y) for eeti,egalax_ts.
Keep the same restriction for existing compatible string.
Fix below DTB_CHECKS warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-gw52xx.dtb: /soc/bus@2100000/i2c@21a8000/egalax_ts@4: failed to match any schema with compatible: ['eeti,egalax_ts']
Signed-off-by: Frank Li <Frank.Li@nxp.com >
Reviewed-by: Rob Herring (Arm) <robh@kernel.org >
Link: https://lore.kernel.org/r/20250904171543.517650-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com >
2025-09-06 07:02:36 -07:00
Philipp Zabel
87d9d1e3eb
dt-bindings: input: touchscreen: exc3000: add EXC81W32
...
Add compatible for EXC81W32 touchscreen controllers.
They use the same protocol and have the same resolution as EXC80H84.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de >
Acked-by: Conor Dooley <conor.dooley@microchip.com >
Link: https://lore.kernel.org/r/20240710-input-exc3000-exc81w32-v3-1-4272183628b4@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com >
2024-07-11 09:58:35 -07:00
Mike Looijmans
ff78525569
dt-bindings: input: exc3000: support power supply regulators
...
Add power supply regulator support to the exc3000 devices.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl >
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org >
Link: https://lore.kernel.org/r/20230707131042.10795-1-mike.looijmans@topic.nl
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com >
2023-07-07 16:54:11 -07:00
Sebastian Reichel
27aced19e0
Input: exc3000 - add reset gpio support
...
Add basic support for an optional reset gpio.
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com >
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com >
Acked-by: Rob Herring <robh@kernel.org >
Link: https://lore.kernel.org/r/20200805160520.456570-4-sebastian.reichel@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com >
2020-08-06 17:34:18 -07:00
Sebastian Reichel
3bdd21c693
Input: exc3000 - add EXC80H60 and EXC80H84 support
...
This adds support for EXC80H60 and EXCH84 controllers, which
use a different event type id and have two extra bits for the
resolution (so the maximum is 16K instead of 4K).
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com >
Acked-by: Rob Herring <robh@kernel.org >
Link: https://lore.kernel.org/r/20200805160520.456570-3-sebastian.reichel@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com >
2020-08-06 17:34:17 -07:00
Sebastian Reichel
1053653ffa
dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to json-schema
...
Convert the EETI EXC3000 binding to DT schema format using json-schema
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com >
Reviewed-by: Rob Herring <robh@kernel.org >
Link: https://lore.kernel.org/r/20200805160520.456570-2-sebastian.reichel@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com >
2020-08-06 17:34:16 -07:00
