Documentation/process/deprecated.rst recommends against the use of
kmalloc with dynamic size calculations due to the risk of overflow and
smaller allocation being made than the caller was expecting.
Replace kmalloc() with kmalloc_array() in amdgpu_amdkfd_gfx_v10.c,
amdgpu_amdkfd_gfx_v10_3.c, amdgpu_amdkfd_gfx_v11.c and
amdgpu_amdkfd_gfx_v12.c to make the intended allocation size clearer
and avoid potential overflow issues.
Suggested-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Rahul Kumar <rk0006818@gmail.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
we dont need to allocate local array of pages to hold
the pages returned by the hmm, instead we could use
the hmm_range structure itself to get to hmm_pfn
and get the required pages directly.
This avoids call to alloc/free quite a lot.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's not necessary that the build string and atom header section has a
difference of 32 bytes. Use the remaining bytes in the section as copy
limit.
Fixes: d6fa802661 ("drm/amdgpu: Add vbios build number interface")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kcalloc() may fail. When WS is non-zero and allocation fails, ectx.ws
remains NULL while ectx.ws_size is set, leading to a potential NULL
pointer dereference in atom_get_src_int() when accessing WS entries.
Return -ENOMEM on allocation failure to avoid the NULL dereference.
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It turned out that protecting the status of each bo_va with a
spinlock was just hiding problems instead of solving them.
Revert the whole approach, add a separate stats_lock and lockdep
assertions that the correct reservation lock is held all over the place.
This not only allows for better checks if a state transition is properly
protected by a lock, but also switching back to using list macros to
iterate over the state of lists protected by the dma_resv lock of the
root PD.
v2: re-add missing check
v3: split into two patches
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In S0i3, GFX state is retained, so it's preferrable to
preempt queues rather than unmapping them as the overhead
is lower.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: David Perry <david.perry@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check VF critical region before RAS poison injection to ensure that the
poison injection will not hit the VF critical region.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When in S0i3, the GFX state is retained, so all we need to do
is stop the runlist so GFX can enter gfxoff.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: David Perry <david.perry@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The SRIOV guest send requet to host to check whether the poison
injection address is in VF critical region or not via mabox.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC has been the default for ~8 years now and supports
many things that the non-DC code does not (audio, DP MST, etc.).
No DCE 11.x IPs ever supported analog encoders so that is not
an issue. Finally drop this code.
Acked-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of using i2c_add_adapter() and i2c_del_adapter() in the SMU V11,
use devm_i2c_add_adapter() to simplify the code path.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit replaces i2c_add_adapter() with devm_i2c_add_adapter() and
removes part of the cleanup logic since the new function handles the i2c
removal.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That was actually complete nonsense and not validating the BOs
at all. The code just cleared all VM areas were it couldn't grab the
lock for a BO.
Try to fix this. Only compile tested at the moment.
v2: fix fence slot reservation as well as pointed out by Sunil.
also validate PDs, PTs, per VM BOs and update PDEs
v3: grab the status_lock while working with the done list.
v4: rename functions, add some comments, fix waiting for updates to
complete.
v4: rename amdgpu_vm_lock_done_list(), add some more comments
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gang submission means that the kernel driver guarantees that multiple
submissions are executed on the HW at the same time on different engines.
Background is that those submissions then depend on each other and each
can't finish stand alone.
SRIOV now uses world switch to preempt submissions on the engines to allow
sharing the HW resources between multiple VFs.
The problem is now that the SRIOV world switch can't know about such inter
dependencies and will cause a timeout if it waits for a partially running
gang submission.
To conclude SRIOV and gang submissions are fundamentally incompatible at
the moment. For now just disable them.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable the cleaner shader for additional GFX11.0.1/11.0.4 series GPUs to
ensure data isolation among GPU tasks. The cleaner shader is tasked with
clearing the Local Data Store (LDS), Vector General Purpose Registers
(VGPRs), and Scalar General Purpose Registers (SGPRs), which helps avoid
data leakage and guarantees the accuracy of computational results.
This update extends cleaner shader support to GFX11.0.1/11.0.4 GPUs,
previously available for GFX11.0.3. It enhances security by clearing GPU
memory between processes and maintains a consistent GPU state across KGD
and KFD workloads.
Cc: Wasee Alam <wasee.alam@amd.com>
Cc: Mario Sopena-Novales <mario.novales@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0a71ceb27f)
This is should be unnecessary since a VRAM manager isn't mandatory in
the first place.
It could be that we have some missing checks inside AMDGPU or TTM but
those should then be fixed instead of worked around like that.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MES pipe0 will do VM invalidation with engine set 5 when assign VMID to a process,
driver will submit inv_tlb package to mes pipe1. It might run into race condition
if both pipes use the same invalidate engine set. From MES version 0x83 it will use
invalidate engine set 6 for pipe1 to fix the issue
Signed-off-by: Shaoyun Liu <shaoyun.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch modifies the user queue management to use preempt/restore
operations instead of full map/unmap for queue eviction scenarios where
applicable. The changes include:
1. Introduces new helper functions:
- amdgpu_userqueue_preempt_helper()
- amdgpu_userqueue_restore_helper()
2. Updates queue state management to track PREEMPTED state
3. Modifies eviction handling to use preempt instead of unmap:
- amdgpu_userq_evict_all() now uses preempt_helper
- amdgpu_userq_restore_all() now uses restore_helper
The preempt/restore approach provides better performance during queue
eviction by avoiding the overhead of full queue teardown and setup.
Full map/unmap operations are still used for initial setup/teardown
and system suspend scenarios.
v2: rename amdgpu_userqueue_restore_helper/amdgpu_userqueue_preempt_helper to
amdgpu_userq_restore_helper/amdgpu_userq_preempt_helper for consistency. (Alex)
v3: amdgpu_userq_stop_sched_for_enforce_isolation() and
amdgpu_userq_start_sched_for_enforce_isolation() should use preempt and restore (Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the suspend and resume API rather than remove queue
and add queue API. The former just preempts the queue
while the latter remove it from the scheduler completely.
There is no need to do that, we only need preemption
in this case.
V2: replace queue_active with queue state
v3: set the suspend_fence_addr
v4: allocate another per queue buffer for the suspend fence, and set the sequence number.
also wait for the suspend fence. (Alex)
v5: use a wb slot (Alex)
v6: Change the timeout period. For MES, the default timeout is 2100000; /* 2100 ms */ (Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable the cleaner shader for additional GFX11.0.1/11.0.4 series GPUs to
ensure data isolation among GPU tasks. The cleaner shader is tasked with
clearing the Local Data Store (LDS), Vector General Purpose Registers
(VGPRs), and Scalar General Purpose Registers (SGPRs), which helps avoid
data leakage and guarantees the accuracy of computational results.
This update extends cleaner shader support to GFX11.0.1/11.0.4 GPUs,
previously available for GFX11.0.3. It enhances security by clearing GPU
memory between processes and maintains a consistent GPU state across KGD
and KFD workloads.
Cc: Wasee Alam <wasee.alam@amd.com>
Cc: Mario Sopena-Novales <mario.novales@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Define a utility macro for defining capabilities and their attributes.
Capability attributes are read-only, write-only, read-write.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename extra_dw to extra_bytes and document what it's for.
The value is already used as if it were bytes in vcn_v4_0.c
and in amdgpu_ring_init. Just adjust the dword count in
jpeg_v1_0.c so that it becomes a byte count.
v2:
Rename extra_dw to extra_bytes as discussed during review.
Fixes: c8c1a1d2ef ("drm/amdgpu: define and add extra dword for jpeg ring")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This code isn't needed anymore as we collect the same information
into pm_display_cfg instead.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
xgmi hive reference is taken on function entry, but not released
correctly for all paths. Use __free() to release reference properly.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add mmio_remap bookkeeping to amdgpu_device and introduce
amdgpu_ttm_mmio_remap_bo_init()/fini() to manage a kernel-owned,
one-page (4K) BO in AMDGPU_GEM_DOMAIN_MMIO_REMAP.
Bookkeeping:
- adev->rmmio_remap.bo : kernel-owned singleton BO
The BO is allocated during TTM init when a remap bus address is available
(adev->rmmio_remap.bus_addr) and PAGE_SIZE <= AMDGPU_GPU_PAGE_SIZE (4K),
and freed during TTM fini.
v2:
- Check mmio_remap bus address (adev->rmmio_remap.bus_addr) instead of
rmmio_base. (Alex)
- Skip quietly if PAGE_SIZE > AMDGPU_GPU_PAGE_SIZE or no bus address
(no warn). (Alex)
- Use `amdgpu_bo_create()` (not *_kernel) - Only with this The object
is stored in adev->mmio_remap.bo and will later be exposed to
userspace via a GEM handle. (Christian)
v3:
- Remove obvious comment before amdgpu_ttm_mmio_remap_bo_fini() call.
(Alex)
v4:
- Squash bookkeeping into this patch (Christian)
Suggested-by: Christian König <christian.koenig@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a one-page TTM range manager for AMDGPU_PL_MMIO_REMAP via
amdgpu_ttm_init_on_chip(). This only registers the placement with TTM;
no BO is allocated in this patch.
The singleton 4K remap BO is created and freed in the following patch.
This split follows to separate heap bring-up from BO allocation.
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement TTM-level behavior for AMDGPU_PL_MMIO_REMAP so it behaves as a
CPU-visible IO page:
* amdgpu_evict_flags(): mark as unmovable
* amdgpu_res_cpu_visible(): consider CPU-visible
* amdgpu_bo_move(): use null move when src/dst is MMIO_REMAP
* amdgpu_ttm_io_mem_reserve(): program base/is_iomem/caching using
the device's mmio_remap_* metadata
* amdgpu_ttm_io_mem_pfn(): return PFN for the remapped HDP page
* amdgpu_ttm_tt_pde_flags(): set AMDGPU_PTE_SYSTEM for this mem type
v2:
- Drop HDP-specific comment; keep generic remap (Alex).
v3:
- Fix indentation in amdgpu_res_cpu_visible (Christian).
- Use adev->rmmio_remap.bus_addr for MMIO_REMAP bus/PFN calculations
(Alex).
v4:
- Drop unnecessary (resource_size_t) casts in MMIO_REMAP io-mem paths
(Alex)
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace kzalloc() followed by copy_from_user() with memdup_user() to
improve and simplify ta_if_load_debugfs_write() and
ta_if_invoke_debugfs_write().
No functional changes intended.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace k(v)malloc_array() + copy_from_user() with (v)memdup_array_user().
This shrinks the source code and improves separation between the kernel
and userspace slabs.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace kmalloc_array() + copy_from_user() with memdup_array_user().
This shrinks the source code and improves separation between the kernel
and userspace slabs.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace kvmalloc_array() + copy_from_user() with vmemdup_array_user() on
the fast path.
This shrinks the source code and improves separation between the kernel
and userspace slabs.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
