We need commit f8f6ae5d07 ("mm: always have io_remap_pfn_range() set
pgprot_decrypted()") to be able to merge Jason's cleanup patch.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm-misc-next for 5.11:
UAPI Changes:
Cross-subsystem Changes:
- arch/arm64: Describe G12b GPU as coherent
- iommu: Support coherency for Mali LPAE
Core Changes:
- atomic: Pass full state to CRTC atomic_{check, begin, flush}(); Use
atomic-state pointers
- drm: Remove SCATTER_LIST_MAX_SEGMENT; Cleanups
- doc: Document legacy_cursor_update better; cleanups
- edid: Don't warn n EDIDs of zero
- ttm: New backend allocation pool; Remove old page allocator; Rework
no_retry handling; Replace flags with booleans in struct ttm_operation_ctx
- vram-helper: Cleanups
- fbdev: Cleanups
- console: Store font size as unsigned value
Driver Changes:
- ast: Support new display mode
- amdgpu: Switch to new TTM allocator
- hisilicon: Cleanups
- nouveau: Switch to new TTM allocator; Fix include of swiotbl.h and
limits.h; Use state helper instead of CRTC state pointer
- panfrost: Support cache-coherent integrations; Fix mutex corruption on
open/close; Cleanupse
- qxl: Cleanups
- radeon: Switch to new TTM allocator
- ticdc: Fix build failure
- vmwgfx: Switch to new TTM allocator
- xlnx: Use dma_request_chan
- fbdev/sh_mobile: Cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105101641.GA13099@linux-uq9g
We wrap the timeline on construction of the next request, but there may
still be requests in flight that have not yet finalized the breadcrumb.
(The breadcrumb is delayed as we need engine-local offsets, and for the
virtual engine that is not known until execution.) As such, by the time
we write to the timeline's HWSP offset it may have changed, and we
should use the value we preserved in the request instead.
Though the window is small and infrequent (at full flow we can expect a
timeline's seqno to wrap once every 30 minutes), the impact of writing
the old seqno into the new HWSP is severe: the old requests are never
completed, and the new requests are completed before they are even
submitted.
Fixes: ebece75392 ("drm/i915: Keep timeline HWSP allocated until idle across the system")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201022064127.10159-1-chris@chris-wilson.co.uk
(cherry picked from commit c10f6019d0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since commit 9a40401cfa ("lib/scatterlist: Do not limit max_segment to
PAGE_ALIGNED values") the max_segment input to sg_alloc_table_from_pages()
does not have to be any special value. The new algorithm will always
create something less than what the user provides. Thus eliminate this
confusing constant.
- vmwgfx should use the HW capability, not mix in the OS page size for
calling dma_set_max_seg_size()
- i915 uses i915_sg_segment_size() both for sg_alloc_table_from_pages
and for some open coded sgl construction. This doesn't change the value
since rounddown(size, UINT_MAX) == SCATTERLIST_MAX_SEGMENT
- drm_prime_pages_to_sg uses it as a default if max_segment is zero,
UINT_MAX is fine to use directly.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Qian Cai <cai@lca.pw>
Cc: "Ursulin, Tvrtko" <tvrtko.ursulin@intel.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/0-v1-44733fccd781+13d-rm_scatterlist_max_jgg@nvidia.com
If the VBT assigned tc->legacy_port mismatches the live_status indicator
for the connector, we ignore the VBT directive and switch over to the HW
setting. This is not a driver error, unless we happen to misparse the
VBT or the live_status registers. However, for the system in CI where
the error is only reported on 1 port out of 4, the evidence indicates
the VBT is wrong. Stop flaging this as an error since the cause is
beyond our control, fixup the mistake and continue on.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201030153209.14808-1-chris@chris-wilson.co.uk
ibx_irq_pre_postinstall() looks totally pointless. We can just
init both SDEIMR and SDEIER at the same time before enabling the
master interrupt. It's equally racy as the other order due
to doing all of this from the postinstall stage with the interrupt
handler already in place. That is, safe with MSI but racy with
shared legacy interrupts. Fortunately we should have MSI on all ilk+.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-20-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Let's pimp the DDI encoder->name to reflect what the spec calls them.
Ie. on pre-tgl DDI A-F, on tgl+ DDI A-C or DDI TC1-6.
Also since each encoder is really a combination of the DDI and the PHY
we include the PHY name as well.
ICL is a bit special since it already has the two different types
of DDIs (combo or TC) but it still calls them just DDI A-F regarless
of the type. For that let's add an extra "(TC)" note to remind
is which type of DDI it really is.
The code is darn ugly, but not sure there's much we can do about it.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-4-ville.syrjala@linux.intel.com
One issue exposed after below commit with which the system will freeze
at suspend after vGPU is created (no need to activate the vGPU).
commit e6ba764802 ("drm/i915: Remove i915->kernel_context")
Old implementation pin the intel_context at setup_submission and
unpin it at clean_submission. So after some vGPU is created, the
intel_context is always pinned there although no workload using it.
It will then block i915 enter suspend state.
There is no need to pin it all the time. Pin/unpin it around workload
lifecycle is more reasonable. After GVT enabled suspend/resume, the
pinned intel_context will also get unpined when userspace put VM process
into suspend state since all workloads are retired, then it's safe to
unpin all intel_context for workloads created. So move the pin/unpin to
create_workload and destroy_workload, while still keep the
create/destroy in old place.
V2:
Rebase.
Fixes: e6ba764802 ("drm/i915: Remove i915->kernel_context")
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201016054059.238371-1-colin.xu@intel.com
Restore RPS for ILK-M. We lost it when an extra HAS_RPS()
check appeared in intel_rps_enable().
Unfortunaltey this just makes the performance worse on my
ILK because intel_ips insists on limiting the GPU freq to
the minimum. If we don't do the RPS init then intel_ips will
not limit the frequency for whatever reason. Either it can't
get at some required information and thus makes wrong decisions,
or we mess up some weights/etc. and cause it to make the wrong
decisions when RPS init has been done, or the entire thing is
just wrong. Would require a bunch of reverse engineering to
figure out what's going on.
Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 9c878557b1 ("drm/i915/gt: Use the RPM config register to determine clk frequencies")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021131443.25616-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 2bf06370bc)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We are incorrectly limiting the max allocation size as per the mm
max_order, which is effectively the largest power-of-two that we can fit
in the region size. However, it's normal to setup the region or
allocator with a non-power-of-two size(for example 3G), which we should
already handle correctly, except it seems for the early too-big-check.
v2: make sure we also exercise the I915_BO_ALLOC_CONTIGUOUS path, which
is quite different, since for that we are actually limited by the
largest power-of-two that we can fit within the region size. (Chris)
Fixes: b908be543e ("drm/i915: support creating LMEM objects")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: CQ Tang <cq.tang@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021103606.241395-1-matthew.auld@intel.com
(cherry picked from commit 83ebef47f8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Writes to CURSURFLIVE in TGL are causing IOMMU errors and visual
glitches that are often reproduced when executing CPU intensive
workloads while a eDP 4K panel is attached.
Manually exiting PSR causes the frontbuffer to be updated without
glitches and the IOMMU errors are also gone but this comes at the cost
of less time with PSR active.
So using this workaround until this issue is root caused and a better
fix is found.
The current code is already ready to enable PSR after this exit if
there is not other frontbuffer modifications.
Adding a new if block in psr_force_hw_tracking_exit() instead of reuse
the else/gen8- block because the plan is to revert this workaround
as soon as a better solution is found.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Tested-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201002231627.24528-1-jose.souza@intel.com
Pull more drm fixes from Dave Airlie:
"This should be the last round of things for rc1, a bunch of i915
fixes, some amdgpu, more font OOB fixes and one ttm fix just found
reading code:
fbcon/fonts:
- Two patches to prevent OOB access
ttm:
- fix for evicition value range check
amdgpu:
- Sienna Cichlid fixes
- MST manager resource leak fix
- GPU reset fix
amdkfd:
- Luxmark fix for Navi1x
i915:
- Tweak initial DPCD backlight.enabled value (Sean)
- Initialize reserved MOCS indices (Ayaz)
- Mark initial fb obj as WT on eLLC machines to avoid rcu lockup (Ville)
- Support parsing of oversize batches (Chris)
- Delay execlists processing for TGL (Chris)
- Use the active reference on the vma during error capture (Chris)
- Widen CSB pointer (Chris)
- Wait for CSB entries on TGL (Chris)
- Fix unwind for scratch page allocation (Chris)
- Exclude low patches of stolen memory (Chris)
- Force VT'd workarounds when running as a guest OS (Chris)
- Drop runtime-pm assert from vpgu io accessors (Chris)"
* tag 'drm-next-2020-10-23' of git://anongit.freedesktop.org/drm/drm: (31 commits)
drm/amdgpu: correct the cu and rb info for sienna cichlid
drm/amd/pm: remove the average clock value in sysfs
drm/amd/pm: fix pp_dpm_fclk
Revert drm/amdgpu: disable sienna chichlid UMC RAS
drm/amd/pm: fix pcie information for sienna cichlid
drm/amdkfd: Use same SQ prefetch setting as amdgpu
drm/amd/swsmu: correct wrong feature bit mapping
drm/amd/psp: Fix sysfs: cannot create duplicate filename
drm/amd/display: Avoid MST manager resource leak.
drm/amd/display: Revert "drm/amd/display: Fix a list corruption"
drm/amdgpu: update golden setting for sienna_cichlid
drm/amd/swsmu: add missing feature map for sienna_cichlid
drm/amdgpu: correct the gpu reset handling for job != NULL case
drm/amdgpu: add rlc iram and dram firmware support
drm/amdgpu: add function to program pbb mode for sienna cichlid
drm/i915: Drop runtime-pm assert from vgpu io accessors
drm/i915: Force VT'd workarounds when running as a guest OS
drm/i915: Exclude low pages (128KiB) of stolen from use
drm/i915/gt: Onion unwind for scratch page allocation failure
drm/ttm: fix eviction valuable range check.
...
- Tweak initia DPCD backlight.enabled value (Sean)
- Initialize reserved MOCS indices (Ayaz)
- Mark initial fb obj as WT on eLLC machines to avoid rcu lockup (Ville)
- Support parsing of oversize batches (Chris)
- Delay execlists processing for TGL (Chris)
- Use the active reference on the vma during error capture (Chris)
- Widen CSB pointer (Chris)
- Wait for CSB entries on TGL (Chris)
- Fix unwind for scratch page allocation (Chris)
- Exclude low patches of stolen memory (Chris)
- Force VT'd workarounds when running as a guest OS (Chris)
- Drop runtime-pm assert from vpgu io accessors (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201022205613.GA3469192@intel.com
As we disable the interrupt during suspend, also reset the irq_mask to
short-circuit subsystems that later try to turn off their interrupt
source.
<4>[ 101.816730] i915 0000:00:02.0: drm_WARN_ON(!intel_irqs_enabled(dev_priv))
<4>[ 101.816853] WARNING: CPU: 3 PID: 4241 at drivers/gpu/drm/i915/i915_irq.c:343 ilk_update_display_irq+0xb3/0x130 [i915]
v2: Reset irq_mask for i8xx_irq_reset as well, and split patch to focus
on only i915->irq_mask
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201022114246.28566-1-chris@chris-wilson.co.uk
