Patch series "introduce VM_MAYBE_GUARD and make it sticky", v4.
Currently, guard regions are not visible to users except through
/proc/$pid/pagemap, with no explicit visibility at the VMA level.
This makes the feature less useful, as it isn't entirely apparent which
VMAs may have these entries present, especially when performing actions
which walk through memory regions such as those performed by CRIU.
This series addresses this issue by introducing the VM_MAYBE_GUARD flag
which fulfils this role, updating the smaps logic to display an entry for
these.
The semantics of this flag are that a guard region MAY be present if set
(we cannot be sure, as we can't efficiently track whether an
MADV_GUARD_REMOVE finally removes all the guard regions in a VMA) - but if
not set the VMA definitely does NOT have any guard regions present.
It's problematic to establish this flag without further action, because
that means that VMAs with guard regions in them become non-mergeable with
adjacent VMAs for no especially good reason.
To work around this, this series also introduces the concept of 'sticky'
VMA flags - that is flags which:
a. if set in one VMA and not in another still permit those VMAs to be
merged (if otherwise compatible).
b. When they are merged, the resultant VMA must have the flag set.
The VMA logic is updated to propagate these flags correctly.
Additionally, VM_MAYBE_GUARD being an explicit VMA flag allows us to solve
an issue with file-backed guard regions - previously these established an
anon_vma object for file-backed mappings solely to have vma_needs_copy()
correctly propagate guard region mappings to child processes.
We introduce a new flag alias VM_COPY_ON_FORK (which currently only
specifies VM_MAYBE_GUARD) and update vma_needs_copy() to check explicitly
for this flag and to copy page tables if it is present, which resolves
this issue.
Additionally, we add the ability for allow-listed VMA flags to be
atomically writable with only mmap/VMA read locks held.
The only flag we allow so far is VM_MAYBE_GUARD, which we carefully ensure
does not cause any races by being allowed to do so.
This allows us to maintain guard region installation as a read-locked
operation and not endure the overhead of obtaining a write lock here.
Finally we introduce extensive VMA userland tests to assert that the
sticky VMA logic behaves correctly as well as guard region self tests to
assert that smaps visibility is correctly implemented.
This patch (of 9):
Currently, if a user needs to determine if guard regions are present in a
range, they have to scan all VMAs (or have knowledge of which ones might
have guard regions).
Since commit 8e2f2aeb8b ("fs/proc/task_mmu: add guard region bit to
pagemap") and the related commit a516403787 ("fs/proc: extend the
PAGEMAP_SCAN ioctl to report guard regions"), users can use either
/proc/$pid/pagemap or the PAGEMAP_SCAN functionality to perform this
operation at a virtual address level.
This is not ideal, and it gives no visibility at a /proc/$pid/smaps level
that guard regions exist in ranges.
This patch remedies the situation by establishing a new VMA flag,
VM_MAYBE_GUARD, to indicate that a VMA may contain guard regions (it is
uncertain because we cannot reasonably determine whether a
MADV_GUARD_REMOVE call has removed all of the guard regions in a VMA, and
additionally VMAs may change across merge/split).
We utilise 0x800 for this flag which makes it available to 32-bit
architectures also, a flag that was previously used by VM_DENYWRITE, which
was removed in commit 8d0920bde5 ("mm: remove VM_DENYWRITE") and hasn't
bee reused yet.
We also update the smaps logic and documentation to identify these VMAs.
Another major use of this functionality is that we can use it to identify
that we ought to copy page tables on fork.
We do not actually implement usage of this flag in mm/madvise.c yet as we
need to allow some VMA flags to be applied atomically under mmap/VMA read
lock in order to avoid the need to acquire a write lock for this purpose.
Link: https://lkml.kernel.org/r/cover.1763460113.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/cf8ef821eba29b6c5b5e138fffe95d6dcabdedb9.1763460113.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
subtest_kmem_cache_iter_check_slabinfo() fundamentally compares slab
cache names parsed out from /proc/slabinfo against those stored within
struct kmem_cache_result. The current problem is that the slab cache
name within struct kmem_cache_result is stored within a bounded
fixed-length array (sized to SLAB_NAME_MAX(32)), whereas the name
parsed out from /proc/slabinfo is not. Meaning, using ASSERT_STREQ()
can certainly lead to test failures, particularly when dealing with
slab cache names that are longer than SLAB_NAME_MAX(32)
bytes. Notably, kmem_cache_create() allows callers to create slab
caches with somewhat arbitrarily sized names via its __name identifier
argument, so exceeding the SLAB_NAME_MAX(32) limit that is in place
now can certainly happen.
Make subtest_kmem_cache_iter_check_slabinfo() more reliable by only
checking up to sizeof(struct kmem_cache_result.name) - 1 using
ASSERT_STRNEQ().
Fixes: a496d0cdc8 ("selftests/bpf: Add a test for kmem_cache_iter")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://patch.msgid.link/20251118073734.4188710-1-mattbobrowski@google.com
Cross-merge networking fixes after downstream PR (net-6.18-rc7).
No conflicts, adjacent changes:
tools/testing/selftests/net/af_unix/Makefile
e1bb28bf13 ("selftest: af_unix: Add test for SO_PEEK_OFF.")
45a1cd8346 ("selftests: af_unix: Add tests for ECONNRESET and EOF semantics")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from IPsec and wireless.
Previous releases - regressions:
- prevent NULL deref in generic_hwtstamp_ioctl_lower(),
newer APIs don't populate all the pointers in the request
- phylink: add missing supported link modes for the fixed-link
- mptcp: fix false positive warning in mptcp_pm_nl_rm_addr
Previous releases - always broken:
- openvswitch: remove never-working support for setting NSH fields
- xfrm: number of fixes for error paths of xfrm_state creation/
modification/deletion
- xfrm: fixes for offload
- fix the determination of the protocol of the inner packet
- don't push locally generated packets directly to L2 tunnel
mode offloading, they still need processing from the standard
xfrm path
- mptcp: fix a couple of corner cases in fallback and fastclose
handling
- wifi: rtw89: hw_scan: prevent connections from getting stuck,
work around apparent bug in FW by tweaking messages we send
- af_unix: fix duplicate data if PEEK w/ peek_offset needs to wait
- veth: more robust handing of race to avoid txq getting stuck
- eth: ps3_gelic_net: handle skb allocation failures"
* tag 'net-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
vsock: Ignore signal/timeout on connect() if already established
be2net: pass wrb_params in case of OS2BMC
l2tp: reset skb control buffer on xmit
net: dsa: microchip: lan937x: Fix RGMII delay tuning
selftests: mptcp: add a check for 'add_addr_accepted'
mptcp: fix address removal logic in mptcp_pm_nl_rm_addr
selftests: mptcp: join: userspace: longer timeout
selftests: mptcp: join: endpoints: longer timeout
selftests: mptcp: join: fastclose: remove flaky marks
mptcp: fix duplicate reset on fastclose
mptcp: decouple mptcp fastclose from tcp close
mptcp: do not fallback when OoO is present
mptcp: fix premature close in case of fallback
mptcp: avoid unneeded subflow-level drops
mptcp: fix ack generation for fallback msk
wifi: rtw89: hw_scan: Don't let the operating channel be last
net: phylink: add missing supported link modes for the fixed-link
selftest: af_unix: Add test for SO_PEEK_OFF.
af_unix: Read sk_peek_offset() again after sleeping in unix_stream_read_generic().
net/mlx5: Clean up only new IRQ glue on request_irq() failure
...
The previous patch fixed an issue with the 'add_addr_accepted' counter.
This was not spot by the test suite.
Check this counter and 'add_addr_signal' in MPTCP Join 'delete re-add
signal' test. This should help spotting similar regressions later on.
These counters are crucial for ensuring the MPTCP path manager correctly
handles the subflow creation via 'ADD_ADDR'.
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-11-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In rare cases, when the test environment is very slow, some userspace
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to have a longer
timeout, and even go over the default one. This connection will be
killed at the end, after the verifications: increasing the timeout
doesn't change anything, apart from avoiding it to end before the end of
the verifications.
To play it safe, all userspace tests not waiting for the end of the
transfer are now having a longer timeout: 2 minutes.
The Fixes commit was making the connection longer, but still, the
default timeout would have stopped it after 1 minute, which might not be
enough in very slow environments.
Fixes: 290493078b ("selftests: mptcp: join: userspace: longer transfer")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-9-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In rare cases, when the test environment is very slow, some endpoints
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to have a longer
timeout, and even go over the default one. This connection will be
killed at the end, after the verifications: increasing the timeout
doesn't change anything, apart from avoiding it to end before the end of
the verifications.
To play it safe, all endpoints tests not waiting for the end of the
transfer are now having a longer timeout: 2 minutes.
The Fixes commit was making the connection longer, but still, the
default timeout would have stopped it after 1 minute, which might not be
enough in very slow environments.
Fixes: 6457595db9 ("selftests: mptcp: join: endpoints: longer transfer")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-8-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Parsing KTAP is quite an inconvenience, but most of the time the thing
you really want to know is "did anything fail"?
Let's give the user the his information without them needing
to parse anything.
Because of the use of subshells and namespaces, this needs to be
communicated via a file. Just write arbitrary data into the file and
treat non-empty content as a signal that something failed.
In case any user depends on the current behaviour, such as running this
from a script with `set -e` and parsing the result for failures
afterwards, add a flag they can set to get the old behaviour, namely
--no-error-on-fail.
Link: https://lore.kernel.org/r/20251111-b4-ksft-error-on-fail-v3-1-0951a51135f6@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The printf statement attempts to print the DMA direction string using
the syntax 'dir[directions]', which is an invalid array access. The
variable 'dir' is an integer, and 'directions' is a char pointer array.
This incorrect syntax should be 'directions[dir]', using 'dir' as the
index into the 'directions' array. Fix this by correcting the array
access from 'dir[directions]' to 'directions[dir]'.
Link: https://lore.kernel.org/r/20251104025234.2363-1-zhangchujun@cmss.chinamobile.com
Signed-off-by: Zhang Chujun <zhangchujun@cmss.chinamobile.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
vgic_lpi_stress sends MAPTI and MAPC commands during guest GIC setup to
map interrupt events to ITT entries and collection IDs to
redistributors, respectively.
We have no guarantee that the ITS will finish handling these mapping
commands before the selftest calls KVM_SIGNAL_MSI to inject LPIs to the
guest. If LPIs are injected before ITS mapping completes, the ITS cannot
properly pass the interrupt on to the redistributor.
Fix by adding a SYNC command to the selftests ITS library, then calling
SYNC after ITS mapping to ensure mapping completes before signal_lpi()
writes to GITS_TRANSLATER.
Signed-off-by: Maximilian Dittgen <mdittgen@amazon.de>
Link: https://msgid.link/20251119135744.68552-2-mdittgen@amazon.de
Signed-off-by: Oliver Upton <oupton@kernel.org>
The selftests GIC library and tests assume that the
GICR_TYPER.Processor_number associated with a given CPU is the same as
the CPU's selftest index.
Since this assumption is not guaranteed by specification, add an assert
in gicv3_cpu_init() that validates this is true.
Signed-off-by: Maximilian Dittgen <mdittgen@amazon.de>
Link: https://msgid.link/20251119135744.68552-1-mdittgen@amazon.de
Signed-off-by: Oliver Upton <oupton@kernel.org>
Add selftests to cbo.c to verify Zicbop extension behavior, and split
the previous `--sigill` mode into two options so they can be tested
independently.
The test checks:
- That hwprobe correctly reports Zicbop presence and block size.
- That prefetch instructions execute without exception on valid and NULL
addresses when Zicbop is present.
Signed-off-by: Yao Zihong <zihong.plct@isrc.iscas.ac.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://patch.msgid.link/20251118162436.15485-3-zihong.plct@isrc.iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The new test checks that a route that has been promoted from RA-learned
to static does not switch back when a new RA message arrives. In
addition, it checks that the route is owned by RA again when the static
address is removed.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20251115095939.6967-2-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test covers various cases to verify SO_PEEK_OFF behaviour
for all AF_UNIX socket types.
two_chunks_blocking and two_chunks_overlap_blocking reproduce
the issue mentioned in the previous patch.
Without the patch, the two tests fail:
# RUN so_peek_off.stream.two_chunks_blocking ...
# so_peek_off.c:121:two_chunks_blocking:Expected 'bbbb' == 'aaaabbbb'.
# two_chunks_blocking: Test terminated by assertion
# FAIL so_peek_off.stream.two_chunks_blocking
not ok 3 so_peek_off.stream.two_chunks_blocking
# RUN so_peek_off.stream.two_chunks_overlap_blocking ...
# so_peek_off.c:159:two_chunks_overlap_blocking:Expected 'bbbb' == 'aaaabbbb'.
# two_chunks_overlap_blocking: Test terminated by assertion
# FAIL so_peek_off.stream.two_chunks_overlap_blocking
not ok 5 so_peek_off.stream.two_chunks_overlap_blocking
With the patch, all tests pass:
# PASSED: 15 / 15 tests passed.
# Totals: pass:15 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251117174740.3684604-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mock_get_event() uses an uninitialized local variable, nr_overflow, to
populate the overflow_err_count field. That results in incorrect
overflow_err_count values in mocked cxl_overflow trace events, such as
this case where the records are reported as 0 and should be non-zero:
[] cxl_overflow: memdev=mem7 host=cxl_mem.6 serial=7: log=Failure : 0 records from 1763228189130895685 to 1763228193130896180
Fix by using log->nr_overflow and remove the unused local variable.
A follow-up change was considered in cxl_mem_get_records_log() to
confirm that the overflow_err_count is non-zero when the overflow flag
is set [1]. Since the driver has no functional dependency on this
constraint, and a device that violates this specific requirement does
not cause incorrect driver behavior, no validation check is added.
[1] CXL 3.2, Table 8-65 Get Event Records Output Payload
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>> ---
Link: https://patch.msgid.link/20251116013036.1713313-1-alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Commit 364ee9f326 ("cxl/test: Enhance event testing") changed the
loop iterator in mock_get_event() from a static constant,
CXL_TEST_EVENT_CNT, to a dynamic global variable, ret_limit. The
intent was to vary the number of events returned per call to simulate
events occurring while logs are being read.
However, ret_limit is modified without synchronization. When multiple
threads call mock_get_event() concurrently, one thread may read
ret_limit, another thread may increment it, and the first thread's
loop condition and size calculation see and use the updated value.
This is visible during cxl_test module load when all memdevs are
initializing simultaneously, which includes getting event records. It
is not tied to the cxl-events.sh unit test specifically, as that
operates on a single memdev.
While no actual harm results (the buffer is always large enough and
the record count fields correctly reflect what was written), this is
a correctness issue. The race creates an inconsistent state within
mock_get_event() and adding variability based on a race appears
unintended.
Make ret_limit a local variable populated from an atomic counter. Each
call gets a stable value that won't change during execution. That
preserves the intended behavior of varying the return counts across
calls while eliminating the race condition.
This implementation uses "+ 1" to produce the full range of 1 to
CXL_TEST_EVENT_RET_MAX (4) records. Previously only 1, 2, 3 were
produced.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>> ---
Link: https://patch.msgid.link/20251116013819.1713780-1-alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The connect4_prog and bpf_iter_setsockopt tests duplicate the same
open-coded TCP congestion control string comparison logic. Since
bpf_strncmp() provides the same functionality, use it instead to
avoid repeated open-coded loops.
This change applies only to functional BPF tests and does not affect
the verifier performance benchmarks (veristat.cfg). No functional
changes intended.
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Hoyeon Lee <hoyeon.lee@suse.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251115225550.1086693-5-hoyeon.lee@suse.com
Some BPF selftests contain identical copies of the min(), max(),
before(), and after() helpers. These repeated snippets are the same
across the tests and do not need to be defined separately.
Move these helpers into bpf_tracing_net.h so they can be shared by
TCP related BPF programs. This removes repeated code and keeps the
helpers in a single place.
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Hoyeon Lee <hoyeon.lee@suse.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251115225550.1086693-4-hoyeon.lee@suse.com
Some of the vsyscall selftests expect a #PF when vsyscalls are disabled.
However, with LASS enabled, an invalid access results in a SIGSEGV due
to a #GP instead of a #PF. One such negative test fails because it is
expecting X86_PF_INSTR to be set.
Update the failing test to expect either a #GP or a #PF. Also, update
the printed messages to show the trap number (denoting the type of
fault) instead of assuming a #PF.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20251118182911.2983253-8-sohil.mehta%40intel.com
Add selftests to verify and document Linux’s intended behaviour for
UNIX domain sockets (SOCK_STREAM and SOCK_DGRAM) when a peer closes.
The tests verify that:
1. SOCK_STREAM returns EOF when the peer closes normally.
2. SOCK_STREAM returns ECONNRESET if the peer closes with unread data.
3. SOCK_SEQPACKET returns EOF when the peer closes normally.
4. SOCK_SEQPACKET returns ECONNRESET if the peer closes with unread data.
5. SOCK_DGRAM does not return ECONNRESET when the peer closes.
This follows up on review feedback suggesting a selftest to clarify
Linux’s semantics.
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Sunday Adelodun <adelodunolaoluwa@yahoo.com>
Link: https://patch.msgid.link/20251113112802.44657-1-adelodunolaoluwa@yahoo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ret_set_ksft_status() calls ksft_status_merge() with the current return
status and the last one. It treats a non-zero return code from
ksft_status_merge() as an indication that the return status was
overwritten by the last one and therefore overwrites the return message
with the last one.
Currently, ksft_status_merge() returns a non-zero return code even if
the current return status and the last one are equal. This results in
return messages being overwritten which is counter-productive since we
are more interested in the first failure message and not the last one.
Fix by changing ksft_status_merge() to only return a non-zero return
code if the current return status was actually changed.
Add a test case which checks that the first error message is not
overwritten.
Before:
# ./lib_sh_test.sh
[...]
TEST: RET tfail2 tfail -> fail [FAIL]
retmsg=tfail expected tfail2
[...]
# echo $?
1
After:
# ./lib_sh_test.sh
[...]
TEST: RET tfail2 tfail -> fail [ OK ]
[...]
# echo $?
0
Fixes: 596c8819cb ("selftests: forwarding: Have RET track kselftest framework constants")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251116081029.69112-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recently, some debugging happened around a test that was timing out. The
stats were showing connections being closed which was confusing because
the closing state was caused by the timeout stopping the transfer.
To avoid such confusion, the timeout is no longer done per mptcp_connect
process, but separately. In case of timeout, the stats are now printed,
then the apps are killed.
The stats will still be printed after the kill, but that's fine, and
this might even be useful, just in case. Timeout should be exceptional.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-8-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before, 'nstat' was used to retrieve each individual counter: this means
querying 4 different sources from /proc/net and iterating over 100+
counters each time. Instead, the stats could be retrieved once, and the
output file could be parsed for each counter. Even better, such file is
already present: the nstat history file.
To be able to get this working, the nstat history file also needs to
contains zero counters too, so it is still possible to know if a counter
is missing or set to 0.
This also simplifies mptcp_connect.sh: instead of checking multiple
counters before and after a test to compute the difference, the stats
history files can be reset before each test, and nstat can display only
the difference.
mptcp_lib_get_counter() continues to work when no history file is
available: by fetching nstat directly, like before. This is the case in
diag.sh and userspace_pm.sh where there is no need to save the history
file. This is also the case in mptcp_join.sh, when 'run_tests' is
executed in the background: easier to continue fetching counters than
updating the history each time it is needed.
Note: 'nstat' is called with '-s' in mptcp_lib_nstat_get(), so this
helper can be called multiple times during the test if needed.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-5-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of errors, dump the stats from history instead of using nstat.
There are multiple advantages to that:
- The same filters from pr_err_stats are used, e.g. the unused 'rate'
column is not displayed.
- The counters are closer to the ones from when the test stopped.
- While at it, the errors can be better presented: error colours, a
small indentation to distinguish the different parts, extra new lines.
Even if it should only happen in rare cases -- internal errors, or netns
issues -- if no history is available, 'nstat' is used like before, just
in case.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-4-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On a system which support SME but not SVE we can now disable streaming mode
via ptrace by writing FPSIMD formatted data through NT_ARM_SVE with a VL of
0. Extend fp-ptrace to cover rather than skip these cases, relax the check
for SVE writes of FPSIMD format data to not skip if SME is supported and
accept 0 as the VL when performing the ptrace write.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In order to allow exiting streaming mode on systems with SME but not SVE
we allow writes of FPSIMD format data via NT_ARM_SVE even when SVE is not
supported, add a test case that covers this to sve-ptrace.
We do not support reads.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Extended linear cache unit testing support
- Standardize CXL auto region size
- Add cxl_test CFMWS support for extended linear cache
- Add support for acpi extended linear cache
Add a module parameter to allow activation of extended linear cache
on the auto region for cxl_test. The current platform implementation
for extended linear cache is 1:1 of DRAM and CXL memory. A CFMWS is
created with the size of both memory together where DRAM takes the
first part of the memory range and CXL covers the second part. The
current CXL auto region on cxl_test consists of 2 256M devices that
creates a 512M region. The new extended linear cache setup will have
512M DRAM and 512M CXL memory for a total of 1G CFMWS. The hardware
decoders must have their starting offset moved to after the DRAM region
to handle the CXL regions.
[ dj: Fixup commenting style. (Jonathan) ]
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Fabio M. De Francesco <fabio.m.de.francesco@linux.intel.com>
Link: https://patch.msgid.link/20251117144611.903692-3-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Remove s390 compat support from everything within tools, since s390 compat
support will be removed from the kernel.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Weißschuh <linux@weissschuh.net> # tools/nolibc selftests/nolibc
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> # selftests/vDSO
Acked-by: Alexei Starovoitov <ast@kernel.org> # bpf bits
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
