The smu needs to get the rlc power down message to sync the rlc state
with smu, the rlc state updating message need to be sent at while smu
begin suspend sequence , otherwise SMU will crash while RLC state is not
notified by driver, and rlc state probally changed after that
notification, so it needs to notify rlc state to smu at the end of the
suspend sequence in amdgpu_device_suspend() that can make sure the rlc
state is correctly set to SMU.
[ 101.000590] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
[ 101.000598] amdgpu 0000:03:00.0: amdgpu: Failed to disable gfxoff!
[ 110.838026] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
[ 110.838035] amdgpu 0000:03:00.0: amdgpu: Failed to disable smu features.
[ 110.838039] amdgpu 0000:03:00.0: amdgpu: Fail to disable dpm features!
[ 110.838040] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <smu> failed -62
[ 110.884394] PM: suspend of devices aborted after 21213.620 msecs
[ 110.884402] PM: start suspend of devices aborted after 21213.882 msecs
[ 110.884405] PM: Some devices failed to suspend, or early wake event detected
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In dcn32 DML pipes are ordered the same as dc pipes but only for used
pipes. For example, if dc pipe 1 and 2 are used, their dml pipe indices
would be 0 and 1 respectively. However
update_pipe_slice_table_with_split_flags doesn't skip indices for free
pipes. This causes us to not reference correct dml pipe output when
building pipe topology.
[how]
Use two variables to iterate dc and dml pipes respectively and only
increment dml pipe index when current dc pipe is not free.
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DML2 means that the dcn3x policy for calculating z-state support
no longer runs from validate_bandwidth.
This means we are unconditionally allowing Z8, the hardware default.
[How]
Port the policy over to DCN35, but with a few modifications:
- Don't use min_dst_y_next_start as a check for Z8/Z10 allow
- Add support for overriding the Z10 stutter period per ASIC
- Cleanup the code to make the policy assignment more clear
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We've had misc reports of random IOMMU page faults when
this is used. It's just a rarely used optimization anyway, so
let's just disable it. It can still be toggled via the
module parameter for testing.
v2: leave it configurable via module parameter
Reviewed-by: Yang Wang <kevinyang.wang@amd.com> (v1)
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com> # PHX & Navi33
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We've had misc reports of random IOMMU page faults when
this is used. It's just a rarely used optimization anyway, so
let's just disable it. It can still be toggled via the
module parameter for testing.
v2: leave it configurable via module parameter
Reviewed-by: Yang Wang <kevinyang.wang@amd.com> (v1)
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com> # PHX & Navi33
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We've had misc reports of random IOMMU page faults when
this is used. It's just a rarely used optimization anyway, so
let's just disable it. It can still be toggled via the
module parameter for testing.
v2: leave it configurable via module parameter
Fixes: 67318cb843 ("drm/amdgpu/gmc11: set gart placement GC11")
Reviewed-by: Yang Wang <kevinyang.wang@amd.com> (v1)
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com> # PHX & Navi33
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a module parameter to control the AGP aperture. The AGP
aperture is an aperture in the GPU's internal address space
which provides direct non-paged access to the platform address
space. This access is non-snooped so only uncached memory
can be accessed.
Add a knob so that we can toggle this for debugging.
Fixes: 67318cb843 ("drm/amdgpu/gmc11: set gart placement GC11")
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com> # PHX & Navi33
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The port num info is firstly introduced with 20.00.01.13 xgmi ta and
make them as part of topology info.
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The following patch will fix a minor issue where a debug message is
referencing an struct that has just being checked whether is null or
not. This has been noticed by using coccinelle, in the following output:
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c:540:25-29: ERROR: aconnector is NULL but dereferenced.
Fixes: 5d72e247e5 ("drm/amd/display: switch DC over to the new DRM logging macros")
Signed-off-by: José Pekkarinen <jose.pekkarinen@foxhound.fi>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When ddc_service_construct() is called, it explicitly checks both the
link type and whether there is something on the link which will
dictate whether the pin is marked as hw_supported.
If the pin isn't set or the link is not set (such as from
unloading/reloading amdgpu in an IGT test) then fail the
amdgpu_dm_i2c_xfer() call.
Cc: stable@vger.kernel.org
Fixes: 22676bc500 ("drm/amd/display: Fix dmub soft hang for PSR 1")
Link: https://github.com/fwupd/fwupd/issues/6327
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following:
drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c:237: warning: Function parameter or member 'ring' not described in 'amdgpu_vce_entity_init'
drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c:405: warning: Function parameter or member 'ring' not described in 'amdgpu_uvd_entity_init'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The valid num_mem_partitions is required during ttm pool fini,
thus move the cleanup at the end of the function.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull drm fixes from Daniel Vetter:
"Dave's VPN to the big machine died, so it's on me to do fixes pr this
and next week while everyone else is at plumbers.
- big pile of amd fixes, but mostly for hw support newly added in 6.7
- i915 fixes, mostly minor things
- qxl memory leak fix
- vc4 uaf fix in mock helpers
- syncobj fix for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE"
* tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm: (78 commits)
drm/amdgpu: fix error handling in amdgpu_vm_init
drm/amdgpu: Fix possible null pointer dereference
drm/amdgpu: move UVD and VCE sched entity init after sched init
drm/amdgpu: move kfd_resume before the ip late init
drm/amd: Explicitly check for GFXOFF to be enabled for s0ix
drm/amdgpu: Change WREG32_RLC to WREG32_SOC15_RLC where inst != 0 (v2)
drm/amdgpu: Use correct KIQ MEC engine for gfx9.4.3 (v5)
drm/amdgpu: add smu v13.0.6 pcs xgmi ras error query support
drm/amdgpu: fix software pci_unplug on some chips
drm/amd/display: remove duplicated argument
drm/amdgpu: correct mca debugfs dump reg list
drm/amdgpu: correct acclerator check architecutre dump
drm/amdgpu: add pcs xgmi v6.4.0 ras support
drm/amdgpu: Change extended-scope MTYPE on GC 9.4.3
drm/amdgpu: disable smu v13.0.6 mca debug mode by default
drm/amdgpu: Support multiple error query modes
drm/amdgpu: refine smu v13.0.6 mca dump driver
drm/amdgpu: Do not program PF-only regs in hdp_v4_0.c under SRIOV (v2)
drm/amdgpu: Skip PCTL0_MMHUB_DEEPSLEEP_IB write in jpegv4.0.3 under SRIOV
drm: amd: Resolve Sphinx unexpected indentation warning
...
We need kernel scheduling entities to deal with handle clean up
if apps are not cleaned up properly. With commit 56e449603f
("drm/sched: Convert the GPU scheduler to variable number of run-queues")
the scheduler entities have to be created after scheduler init, so
change the ordering to fix this.
v2: Leave logic in UVD and VCE code
Fixes: 56e449603f ("drm/sched: Convert the GPU scheduler to variable number of run-queues")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <ltuikov89@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: ltuikov89@gmail.com
The kfd_resume needs to touch GC registers to enable the interrupts,
it needs to be done before GFXOFF is enabled to ensure that the GFX is
not off and GC registers can be touched. So move kfd_resume before the
amdgpu_device_ip_late_init which enables the CGPG/GFXOFF.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If a user has disabled GFXOFF this may cause problems for the suspend
sequence. Ensure that it is enabled in amdgpu_acpi_is_s0ix_active().
The system won't reach the deepest state but it also won't hang.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_kiq_wreg/rreg is hardcoded to use MEC engine 0.
Add an xcc_id parameter to amdgpu_kiq_wreg/rreg, define W/RREG32_XCC
and amdgpu_device_xcc_wreg/rreg to use the new xcc_id parameter.
Using amdgpu_sriov_runtime to determine whether to access via kiq or
RLC is sufficient for now.
v5: add condition in amdgpu_device_xcc_w/rreg, remove trace func call
v4: avoid using amdgpu_sriov_w/rreg
v3: use W/RREG32_XCC to handle non-kiq case
v2: define amdgpu_device_xcc_wreg/rreg instead of changing parameters
of amdgpu_device_wreg/rreg
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Spotted by coccicheck, there is a redundant check for
v->SourcePixelFormat[k] != dm_444_16. This patch will
remove it. The corresponding output follows.
drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c:5130:86-122: duplicated argument to && or ||
Signed-off-by: José Pekkarinen <jose.pekkarinen@foxhound.fi>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
refine smu mca driver to support query ras error from pmfw path.
- correct gfx smu bank hwid (from mp5 to smu bank)
- retire unused callback function in amdgpu_mca_smu_funcs{}
- add new mca_bank_set{} structure to collect mca bank
- move enum mca_reg_idx into amdgpu_mca.h header
- add mca status register field decode macro
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
