Pull media updates from Mauro Carvalho Chehab:
- the old V4L2 core videobuf kAPI was finally removed. All media
drivers should now be using VB2 kAPI
- new automotive driver: mgb4
- new platform video driver: npcm-video
- new sensor driver: mt9m114
- new TI driver used in conjunction with Cadence CSI2RX IP to bridge
TI-specific parts
- ir-rx51 was removed and the N900 DT binding was moved to the
pwm-ir-tx generic driver
- drop atomisp-specific ov5693, using the upstream driver instead
- the camss driver has gained RDI3 support for VFE 17x
- the atomisp driver now detects ISP2400 or ISP2401 at run time. No
need to set it up at build time anymore
- lots of driver fixes, cleanups and improvements
* tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits)
media: nuvoton: VIDEO_NPCM_VCD_ECE should depend on ARCH_NPCM
media: venus: Fix firmware path for resources
media: venus: hfi_cmds: Replace one-element array with flex-array member and use __counted_by
media: venus: hfi_parser: Add check to keep the number of codecs within range
media: venus: hfi: add checks to handle capabilities from firmware
media: venus: hfi: fix the check to handle session buffer requirement
media: venus: hfi: add checks to perform sanity on queue pointers
media: platform: cadence: select MIPI_DPHY dependency
media: MAINTAINERS: Fix path for J721E CSI2RX bindings
media: cec: meson: always include meson sub-directory in Makefile
media: videobuf2: Fix IS_ERR checking in vb2_dc_put_userptr()
media: platform: mtk-mdp3: fix uninitialized variable in mdp_path_config()
media: mediatek: vcodec: using encoder device to alloc/free encoder memory
media: imx-jpeg: notify source chagne event when the first picture parsed
media: cx231xx: Use EP5_BUF_SIZE macro
media: siano: Drop unnecessary error check for debugfs_create_dir/file()
media: mediatek: vcodec: Handle invalid encoder vsi
media: aspeed: Drop unnecessary error check for debugfs_create_file()
Documentation: media: buffer.rst: fix V4L2_BUF_FLAG_PREPARED
Documentation: media: gen-errors.rst: fix confusing ENOTTY description
...
Pull USB/Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1.
Nothing really major in here, just lots of constant development for
new hardware. Included in here are:
- Thunderbolt (i.e. USB4) fixes for reported issues and support for
new hardware types and devices
- USB typec additions of new drivers and cleanups for some existing
ones
- xhci cleanups and expanded tracing support and some platform
specific updates
- USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio,
spi, and i2c drivers for that type of device (all acked by the
respective subsystem maintainers.)
- lots of USB gadget driver updates and cleanups
- new USB dwc3 platforms supported, as well as other dwc3 fixes and
cleanups
- USB chipidea driver updates
- other smaller driver cleanups and additions, full details in the
shortlog
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
usb: gadget: uvc: Add missing initialization of ssp config descriptor
usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
usb: raw-gadget: report suspend, resume, reset, and disconnect events
usb: raw-gadget: don't disable device if usb_ep_queue fails
usb: raw-gadget: properly handle interrupted requests
usb:cdnsp: remove TRB_FLUSH_ENDPOINT command
usb: gadget: aspeed_udc: Convert to platform remove callback returning void
dt-bindings: usb: fsa4480: Add compatible for OCP96011
usb: typec: fsa4480: Add support to swap SBU orientation
dt-bindings: usb: fsa4480: Add data-lanes property to endpoint
usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()
Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller"
Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport"
thunderbolt: Fix one kernel-doc comment
usb: gadget: f_ncm: Always set current gadget in ncm_bind()
usb: core: Remove duplicated check in usb_hub_create_port_device
usb: typec: tcpm: Add additional checks for contaminant
arm64: dts: rockchip: rk3588s: Add USB3 host controller
usb: dwc3: add optional PHY interface clocks
dt-bindings: usb: add rk3588 compatible to rockchip,dwc3
...
Pull SoC driver updates from Arnd Bergmann:
"The highlights for the driver support this time are
- Qualcomm platforms gain support for the Qualcomm Secure Execution
Environment firmware interface to access EFI variables on certain
devices, and new features for multiple platform and firmware
drivers.
- Arm FF-A firmware support gains support for v1.1 specification
features, in particular notification and memory transaction
descriptor changes.
- SCMI firmware support now support v3.2 features for clock and DVFS
configuration and a new transport for Qualcomm platforms.
- Minor cleanups and bugfixes are added to pretty much all the active
platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive,
amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and
more.
In particular, this contains portions of the treewide conversion to
use __counted_by annotations and the device_get_match_data helper"
* tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (156 commits)
soc: qcom: pmic_glink_altmode: Print return value on error
firmware: qcom: scm: remove unneeded 'extern' specifiers
firmware: qcom: scm: add a missing forward declaration for struct device
firmware: qcom: move Qualcomm code into its own directory
soc: samsung: exynos-chipid: Convert to platform remove callback returning void
soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size()
soc: qcom: pmic_glink: fix connector type to be DisplayPort
soc: ti: k3-socinfo: Avoid overriding return value
soc: ti: k3-socinfo: Fix typo in bitfield documentation
soc: ti: knav_qmss_queue: Use device_get_match_data()
firmware: ti_sci: Use device_get_match_data()
firmware: qcom: qseecom: add missing include guards
soc/pxa: ssp: Convert to platform remove callback returning void
soc/mediatek: mtk-mmsys: Convert to platform remove callback returning void
soc/mediatek: mtk-devapc: Convert to platform remove callback returning void
soc/loongson: loongson2_guts: Convert to platform remove callback returning void
soc/litex: litex_soc_ctrl: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-qmgr: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-npe: Convert to platform remove callback returning void
soc/hisilicon: kunpeng_hccs: Convert to platform remove callback returning void
...
Pull SoC DT updates from Arnd Bergmann:
"There are a couple new SoCs that are supported for the first time:
- AMD Pensando Elba is a data processing unit based on Cortex-A72 CPU
cores
- Sophgo makes RISC-V based chips, and we now support the CV1800B
chip used in the milkv-duo board and the massive sg2042 chip in the
milkv-pioneer, a 64-core developer workstation.
- Qualcomm Snapdragon 720G (sm7125) is a close relative of Snapdragon
7c and gets added with some Xiaomi phones
- Renesas gains support for the R8A779F4 (R-Car S4-8) automotive SoC
and the RZ/G3S (R9A08G045) embedded SoC.
There are also a bunch of newly supported machines that use already
supported chips. On the 32-bit side, we have:
- USRobotics USR8200 is a NAS/Firewall/router based on the ancient
Intel IXP4xx platform
- A couple of machines based on the NXP i.MX5 and i.MX6 platforms
- One machine each for Allwinner V3s, Aspeed AST2600, Microchip
sama5d29 and ST STM32mp157
The other ones all use arm64 cores on chips from allwinner, amlogic,
freescale, mediatek, qualcomm and rockchip"
* tag 'soc-dt-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (641 commits)
ARM: dts: BCM5301X: Set switch ports for Linksys EA9200
ARM: dts: BCM5301X: Set fixed-link for extra Netgear R8000 CPU ports
ARM: dts: BCM5301X: Explicitly disable unused switch CPU ports
ARM: dts: BCM5301X: Relicense Vivek's code to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Relicense Felix's code to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Set MAC address for Asus RT-AC87U
arm64: dts: socionext: add missing cache properties
riscv: dts: thead: convert isa detection to new properties
arm64: dts: Update cache properties for socionext
arm64: dts: ti: k3-am654-idk: Add ICSSG Ethernet ports
arm64: dts: ti: k3-am654-icssg2: add ICSSG2 Ethernet support
arm64: dts: ti: k3-am65-main: Add ICSSG IEP nodes
arm64: dts: ti: k3-am62p5-sk: Updates for SK EVM
arm64: dts: ti: k3-am62p: Add nodes for more IPs
arm64: dts: rockchip: Add Turing RK1 SoM support
dt-bindings: arm: rockchip: Add Turing RK1
dt-bindings: vendor-prefixes: add turing
arm64: dts: rockchip: Add DFI to rk3588s
arm64: dts: rockchip: Add DFI to rk356x
arm64: dts: rockchip: Always enable DFI on rk3399
...
Pull devicetree updates from Rob Herring:
- Add a kselftest to check for unprobed DT devices
- Fix address translation for some 3 address cells cases
- Refactor firmware node refcounting for AMBA bus
- Add bindings for qcom,sm4450-pdc, Qualcomm Kryo 465 CPU, and
Freescale QMC HDLC
- Add Marantec vendor prefix
- Convert qcom,pm8921-keypad, cnxt,cx92755-wdt, da9062-wdt, and
atmel,at91rm9200-wdt bindings to DT schema
- Several additionalProperties/unevaluatedProperties on child node
schemas fixes
- Drop reserved-memory bindings which now live in dtschema project
- Fix a reference to rockchip,inno-usb2phy.yaml
- Remove backlight nodes from display panel examples
- Expand example for using DT_SCHEMA_FILES
- Merge simple LVDS panel bindings to one binding doc
* tag 'devicetree-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Add support for QMC HDLC
dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Add 'additionalProperties: false' in child nodes
dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Fix example property name
dt-bindings: arm,coresight-cti: Add missing additionalProperties on child nodes
dt-bindings: arm,coresight-cti: Drop type for 'cpu' property
dt-bindings: soundwire: Add reference to soundwire-controller.yaml schema
dt-bindings: input: syna,rmi4: Make "additionalProperties: true" explicit
media: dt-bindings: ti,ds90ub960: Add missing type for "i2c-alias"
dt-bindings: input: qcom,pm8921-keypad: convert to YAML format
of: overlay: unittest: overlay_bad_unresolved: Spelling s/ok/okay/
of: address: Consolidate bus .map() functions
of: address: Store number of bus flag cells rather than bool
of: unittest: Add tests for address translations
of: address: Remove duplicated functions
of: address: Fix address translation when address-size is greater than 2
dt-bindings: watchdog: cnxt,cx92755-wdt: convert txt to yaml
dt-bindings: watchdog: da9062-wdt: convert txt to yaml
dt-bindings: watchdog: fsl,scu-wdt: Document imx8dl
dt-bindings: watchdog: atmel,at91rm9200-wdt: convert txt to yaml
dt-bindings: usb: rockchip,dwc3: update inno usb2 phy binding name
...
The QMC (QUICC mutichannel controller) is a controller present in some
PowerQUICC SoC such as MPC885.
The QMC HDLC uses the QMC controller to transfer HDLC data.
Additionally, a framer can be connected to the QMC HDLC.
If present, this framer is the interface between the TDM bus used by the
QMC HDLC and the E1/T1 line.
The QMC HDLC can use this framer to get information about the E1/T1 line
and configure the E1/T1 line.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231011061437.64213-9-herve.codina@bootlin.com
Signed-off-by: Rob Herring <robh@kernel.org>
Qualcomm driver updates for v6.7
This introduces partial support for the Qualcomm Secure Execution
Environment SCM interface, and uses this to implement EFI variable
access on the Windows On Snapdragon devices (for now).
The 32/64-bit calling convention detector of the SCM interface is
updated to not choose 64-bit convention when Linux is 32-bit. The
"extern" specifier is dropped from the interface include file.
The LLCC driver gains support for carrying configuration for multiple
different system/DDR configurations for a given platform, and selecting
between them. Support for Q[DR]U1000 is added to the driver.
All exported symbols are transitioned to EXPORT_SYMBOL_GPL().
The platform_drivers in the Qualcomm SoC are transitioned to the
void-returning remove_new implementation.
The rmtfs memory driver gains support for leaving guard pages around the
used area, to avoid issues if the allocation happens to be placed
adjacent to another protected memory region.
The socinfo driver gains knowledge about IPQ8174, QCM6490, SM7150P and
various PMICs used together with SM8550.
* tag 'qcom-drivers-for-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (44 commits)
soc: qcom: socinfo: Convert to platform remove callback returning void
soc: qcom: smsm: Convert to platform remove callback returning void
soc: qcom: smp2p: Convert to platform remove callback returning void
soc: qcom: smem: Convert to platform remove callback returning void
soc: qcom: rmtfs_mem: Convert to platform remove callback returning void
soc: qcom: qcom_stats: Convert to platform remove callback returning void
soc: qcom: qcom_gsbi: Convert to platform remove callback returning void
soc: qcom: qcom_aoss: Convert to platform remove callback returning void
soc: qcom: pmic_glink: Convert to platform remove callback returning void
soc: qcom: ocmem: Convert to platform remove callback returning void
soc: qcom: llcc-qcom: Convert to platform remove callback returning void
soc: qcom: icc-bwmon: Convert to platform remove callback returning void
firmware: qcom_scm: use 64-bit calling convention only when client is 64-bit
soc: qcom: llcc: Handle a second device without data corruption
soc: qcom: Switch to EXPORT_SYMBOL_GPL()
soc: qcom: smem: Annotate struct qcom_smem with __counted_by
soc: qcom: rmtfs: Support discarding guard pages
dt-bindings: reserved-memory: rmtfs: Allow guard pages
dt-bindings: firmware: qcom,scm: document IPQ5018 compatible
firmware: qcom_scm: disable SDI if required
...
Link: https://lore.kernel.org/r/20231015204014.855672-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dt-bindings: Changes for v6.7-rc1
This contains some rework of the Tegra PMC device tree bindings that
will help with validating device trees with json-schema.
* tag 'tegra-for-6.7-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: arm: tegra: pmc: Relicense and move into soc/tegra directory
dt-bindings: arm: tegra: pmc: Reformat example
dt-bindings: arm: tegra: pmc: Restructure pad configuration node schema
dt-bindings: arm: tegra: pmc: Increase maximum number of clocks per powergate
dt-bindings: arm: tegra: pmc: Move additionalProperties
dt-bindings: arm: tegra: pmc: Remove useless boilerplate descriptions
dt-bindings: arm: tegra: pmc: Improve property descriptions
Link: https://lore.kernel.org/r/20231013153723.1729109-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas DTS updates for v6.7 (take two)
- Improve audio clock accuracy on the RZ/{G2L,G2LC,V2L} SMARC EVK
development boards,
- Add FLASH support for the Renesas Bock-W development board,
- Add L2 cache and non-coherent DMA support on the RZ/Five SoC and the
RZ/Five SMARC development board,
- Add initial support for the RZ/G3S SoC and the RZ/G3S SMARC SoM and
SMARC Carrier-II EVK development boards,
- Add initial support for the R8A779F4 variant of the R-Car S4-8 SoC
and the R-Car S4 Starter Kit development board,
- Apply DT overlays to base DTBs to improve validation and usability.
* tag 'renesas-dts-for-v6.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (25 commits)
arm64: dts: renesas: Apply overlays to base dtbs
arm64: dts: renesas: rzg3s-smarc-som: Spelling s/device-type/device_type/
arm64: dts: renesas: r9a08g045: Add missing cache-level for L3 cache
arm64: dts: renesas: r9a08g045: Add nodes for SDHI1 and SDHI2
arm64: dts: renesas: ebisu: Document Ebisu-4D support
arm64: dts: renesas: Add R-Car S4 Starter Kit support
arm64: dts: renesas: Add Renesas R8A779F4 SoC support
arm64: dts: renesas: Add initial device tree for RZ/G3S SMARC EVK board
arm64: dts: renesas: Add initial device tree for RZ SMARC Carrier-II Board
arm64: dts: renesas: Add initial support for RZ/G3S SMARC SoM
arm64: dts: renesas: Add initial DTSI for RZ/G3S SoC
riscv: dts: renesas: rzfive-smarc: Enable the blocks which were explicitly disabled
riscv: dts: renesas: r9a07g043f: Add dma-noncoherent property
riscv: dts: renesas: r9a07g043f: Add L2 cache node
ARM: dts: renesas: bockw: Add FLASH node
arm64: dts: renesas: rz-smarc: Use versa3 clk for audio mclk
dt-bindings: clock: renesas,rzg2l-cpg: Document RZ/G3S SoC
clk: tegra: fix error return case for recalc_rate
clk: si521xx: Fix regmap write accessor
clk: si521xx: Use REGCACHE_FLAT instead of NONE
...
Link: https://lore.kernel.org/r/cover.1697200123.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
STi DT for v6.7, round 1 :
stih418-b2264: leds and serial fixes
stih407: drop max-duty-cycle property
stih415/416: remove boards from yaml
stih407/410/418: add boards to yaml
* tag 'sti-dt-for-v6.7-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
dt-bindings: arm: sti: add STi boards and remove stih415/stih416
dt-bindings: soc: sti: add STi platform syscon
ARM: dts: st: correct led level in stih418-b2264.dts
ARM: dts: st: move leds out of soc in stih418-b2264.dts
ARM: dts: st: correct serial alias in stih418-b2264.dts
ARM: dts: st: stih407: drop max-duty-cycle
Link: https://lore.kernel.org/r/e6b975f2-9936-465a-8253-6fcead974006@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Dual-license this binding for consistency with other Tegra bindings and
move it into the soc/tegra directory.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The reboot and poweroff features are actually part of the Power
Management Unit system controller, thus allow them as its children,
instead of specifying as separate device nodes with syscon phandle.
Without it, the reboot/poweroff feature becomes unavailable.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Loongson-2K series chips (ls2k0500/ls2k1000/ls2k2000) share the same
PM system controller, using ls2k0500 compatible as fallback for the
others.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add dt-bindings document for Graphics Core Information (GFXI) node. It
is used by NPCM video driver to retrieve Graphics core information.
Signed-off-by: Marvin Lin <milkfafa@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Introduce MT7988 SoC compatibility string in mt7986-wo-ccif binding.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull clk subsystem updates from Stephen Boyd:
"This pull request is full of clk driver changes. In fact, there aren't
any changes to the clk framework this time around. That's probably
because everyone was on vacation (yours truly included). We did lose a
couple clk drivers this time around because nobody was using those
devices. That skews the diffstat a bit, but either way, nothing looks
out of the ordinary here. The usual suspects are chugging along adding
support for more SoCs and fixing bugs.
If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a
handful of patches that move the NR_CLKS define from the DT binding
header to the driver. There's even patches that migrate drivers to use
clk_parent_data and clk_hw to describe clk tree topology. It seems
that the spring (summer?) cleaning bug got some folks, or the
semiconductor shortage finally hit the software side.
New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver
Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct
spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to
drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and
RZ/G2 SoCs
- Convert sun9i-mmc clock to use
devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e.
consider alternative parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher)
clock rate for NM, NKM, mux and div type clocks, as use it for
Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for
Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks
moved out to the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock
controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs,
and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are
corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global
clock controller driver
- Support retention for the Qualcomm SC8280XP display clock
controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE
to fix issues with missing parent clocks across sc7180, sm7150,
sm6350 and sm8250, while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for
correctness
- Extend the Qualcomm SM83550 Video clock controller to support
SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and
R-Car H3, M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to
allow glitch free switching"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits)
clk: qcom: Fix SM_GPUCC_8450 dependencies
clk: lmk04832: Support using PLL1_LD as SPI readback pin
clk: lmk04832: Don't disable vco clock on probe fail
clk: lmk04832: Set missing parent_names for output clocks
clk: mvebu: Convert to devm_platform_ioremap_resource()
clk: nuvoton: Convert to devm_platform_ioremap_resource()
clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
clk: ti: Use devm_platform_get_and_ioremap_resource()
clk: mediatek: Convert to devm_platform_ioremap_resource()
clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
clk: gemini: Convert to devm_platform_ioremap_resource()
clk: fsl-sai: Convert to devm_platform_ioremap_resource()
clk: bm1880: Convert to devm_platform_ioremap_resource()
clk: axm5516: Convert to devm_platform_ioremap_resource()
clk: actions: Convert to devm_platform_ioremap_resource()
clk: cdce925: Remove redundant of_match_ptr()
clk: pxa910: Move number of clocks to driver source
clk: pxa1928: Move number of clocks to driver source
clk: pxa168: Move number of clocks to driver source
clk: mmp2: Move number of clocks to driver source
...
Pull devicetree updates from Rob Herring:
"DT core:
- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.
- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.
- Refactor node and property manipulation functions to better share
code with old API and changeset API
- Refactor changeset print functions to a common implementation
- Move some platform_device specific functions into of_platform.c
Bindings:
- Treewide fixing of typos
- Treewide clean-up of SPDX tags to use 'OR' consistently
- Last chunk of dropping unnecessary quotes. With that, the check for
unnecessary quotes is enabled in yamllint.
- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format
- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450
Inline Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt
controller, Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings
- Fixes for Rockchip DWC PCI binding
- Ensure all properties are evaluated on USB connector schema
- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations"
* tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
dt-bindings: usb: Add V3s compatible string for OHCI
dt-bindings: usb: Add V3s compatible string for EHCI
dt-bindings: display: panel: mipi-dbi-spi: add Saef SF-TC154B
dt-bindings: vendor-prefixes: document Saef Technology
dt-bindings: thermal: lmh: update maintainer address
of: unittest: Fix of_unittest_pci_node() kconfig dependencies
dt-bindings: crypto: ice: Document sm8450 inline crypto engine
dt-bindings: ufs: qcom: Add ICE to sm8450 example
dt-bindings: ufs: qcom: Add sm6115 binding
dt-bindings: ufs: qcom: Add reg-names property for ICE
dt-bindings: yamllint: Enable quoted string check
dt-bindings: Drop remaining unneeded quotes
of: unittest-data: Fix whitespace - angular brackets
of: unittest-data: Fix whitespace - indentation
of: unittest-data: Fix whitespace - blank lines
of: unittest-data: Convert remaining overlay DTS files to sugar syntax
of: overlay: unittest: Add test for unresolved symbol
of: unittest: Add separators to of_unittest_overlay_high_level()
of: unittest: Cleanup partially-applied overlays
of: unittest: Merge of_unittest_apply{,_revert}_overlay_check()
...
Pull ARM devicetree updates from Arnd Bergmann:
"These are the devicetree updates for Arm and RISC-V based SoCs, mainly
from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips, Samsung, ST and
Starfive.
Only a few new SoC got added:
- TI AM62P5, a variant of the existing Sitara AM62x family
- Intel Agilex5, an FPGFA platform that includes an Cortex-A76/A55
SoC.
- Qualcomm ipq5018 is used in wireless access points
- Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile phone
platform.
In total, 29 machines get added, which is low because of the summer
break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST,
Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of
these are development and reference boards.
Despite not adding a lot of new machines, there are over 700 patches
in total, most of which are cleanups and minor fixes"
* tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (735 commits)
arm64: dts: use capital "OR" for multiple licenses in SPDX
ARM: dts: use capital "OR" for multiple licenses in SPDX
arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
ARM: dts: qcom: apq8064: add support to gsbi4 uart
riscv: dts: change TH1520 files to dual license
riscv: dts: thead: add BeagleV Ahead board device tree
dt-bindings: riscv: Add BeagleV Ahead board compatibles
ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board
ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators
dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs
ARM: dts: stm32: support display on stm32f746-disco board
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
ARM: dts: stm32: add pin map for LTDC on stm32f7
ARM: dts: stm32: add ltdc support on stm32f746 MCU
arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Add PDC
riscv: dts: starfive: fix jh7110 qspi sort order
...
- Add Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
- Introduce kstrdup_and_replace() and use it
* clk-versa:
clk: vc7: Use i2c_get_match_data() instead of device_get_match_data()
clk: vc5: Use i2c_get_match_data() instead of device_get_match_data()
clk: versaclock3: Switch to use i2c_driver's probe callback
clk: Add support for versa3 clock driver
dt-bindings: clock: Add Renesas versa3 clock generator bindings
* clk-strdup:
clk: ti: Replace kstrdup() + strreplace() with kstrdup_and_replace()
clk: tegra: Replace kstrdup() + strreplace() with kstrdup_and_replace()
driver core: Replace kstrdup() + strreplace() with kstrdup_and_replace()
lib/string_helpers: Add kstrdup_and_replace() helper
* clk-amlogic: (22 commits)
dt-bindings: soc: amlogic: document System Control registers
dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema
dt-bindings: clock: amlogic: convert amlogic,gxbb-clkc.txt to dt-schema
clk: meson: axg-audio: move bindings include to main driver
clk: meson: meson8b: move bindings include to main driver
clk: meson: a1: move bindings include to main driver
clk: meson: eeclk: move bindings include to main driver
clk: meson: aoclk: move bindings include to main driver
dt-bindings: clk: axg-audio-clkc: expose all clock ids
dt-bindings: clk: amlogic,a1-pll-clkc: expose all clock ids
dt-bindings: clk: amlogic,a1-peripherals-clkc: expose all clock ids
dt-bindings: clk: meson8b-clkc: expose all clock ids
dt-bindings: clk: g12a-aoclkc: expose all clock ids
dt-bindings: clk: g12a-clks: expose all clock ids
dt-bindings: clk: axg-clkc: expose all clock ids
dt-bindings: clk: gxbb-clkc: expose all clock ids
clk: meson: migrate axg-audio out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate meson8b out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate a1 clock drivers out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate meson-aoclk out of hw_onecell_data to drop NR_CLKS
...
* clk-allwinner:
clk: sunxi-ng: nkm: Prefer current parent rate
clk: sunxi-ng: a64: select closest rate for pll-video0
clk: sunxi-ng: div: Support finding closest rate
clk: sunxi-ng: mux: Support finding closest rate
clk: sunxi-ng: nkm: Support finding closest rate
clk: sunxi-ng: nm: Support finding closest rate
clk: sunxi-ng: Add helper function to find closest rate
clk: sunxi-ng: Add feature to find closest rate
clk: sunxi-ng: a64: allow pll-mipi to set parent's rate
clk: sunxi-ng: nkm: consider alternative parent rates when determining rate
clk: sunxi-ng: nkm: Use correct parameter name for parent HW
clk: sunxi-ng: Modify mismatched function name
clk: sunxi: sun9i-mmc: Use devm_platform_get_and_ioremap_resource()
* clk-rockchip:
clk: rockchip: rv1126: Add PD_VO clock tree
clk: rockchip: rk3568: Fix PLL rate setting for 78.75MHz
clk: rockchip: rk3568: Add PLL rate for 101MHz
Documentation/process/license-rules.rst and checkpatch expect the SPDX
identifier syntax for multiple licenses to use capital "OR". Correct it
to keep consistent format and avoid copy-paste issues.
Correct also the format // -> .* in few Allwinner binding headers as
pointed out by checkpatch:
WARNING: Improper SPDX comment style for 'include/dt-bindings/reset/sun50i-h6-ccu.h', please use '/*' instead
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230823084540.112602-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Qualcomm driver updates for v6.6
Compatible and clock handling in the Qualcomm SCM driver is cleaned up,
together with a couple stylistic cleanups and transition to mark
exported symbols GPL only.
An abstraction for the RPM subsystem is introduced, to make align the
structure of the SMD and GLINK nodes thereof with the structure when a
remoteproc is involved. This is done to facilitate associating
additional entities with the RPM subsystem.
The qmp_send() API is modified to not expose hardware requirements onto
the client drivers, and then further extended to allow command
formatting directly in the API, to facilitate this typical use case.
In the Qualcomm Command DB driver, NUL characters previously included in
identifiers are dropped from the debugfs, to facilitate scripting.
The thresholds of the BWMON driver are simplified to avoid hard coded
starting values.
The OCMEM driver is updated with some cleanups and fixes, and addition
of MSM8226 support.
PMIC_GLINK gains support for retimer switches, safe mode is selected
when the cable is disconnected from altmode and the same is enabled for
SM8550.
An off-by-one string length check is corrected in the QMI encoder
decoder library.
The RPMh tracepoints are extended to include the state of the request,
to provide needed context in the traced events.
The series from Ulf creating a genpd framework is integrated, to
facilitate the other changes to the cpr, rpmpd and rpmhpd driver.
SDX75 support is added to the rpmhpd driver, and the rpmpd driver is
extended with the same sync_state logic found in the rpmhpd driver.
The socinfo driver gains knowledge about SM4450 and SM7125, the IPQ5019
platform is dropped.
Clock handling in the GSBI driver is cleaned up with the use of
devm_clk_get_enabled().
The list of VMIDs defined for the SCM assign memory interface is
extended.
* tag 'qcom-drivers-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (52 commits)
soc: qcom: aoss: Tidy up qmp_send() callers
soc: qcom: aoss: Format string in qmp_send()
soc: qcom: aoss: Move length requirements from caller
dt-bindings: firmware: qcom: scm: Updating VMID list
dt-bindings: qcom: Update RPMHPD entries for some SoCs
soc: qcom: qmi_encdec: Restrict string length in decode
soc: qcom: smem: Fix incompatible types in comparison
soc: qcom: ocmem: add missing clk_disable_unprepare() in ocmem_dev_probe()
soc: qcom: socinfo: Add SoC ID for SM7125
dt-bindings: arm: qcom,ids: Add SoC ID for SM7125
dt-bindings: arm: qcom,ids: drop the IPQ5019 SoC ID
soc: qcom: socinfo: drop the IPQ5019 SoC ID
soc: qcom: socinfo: add SM4450 ID
dt-bindings: arm: qcom,ids: add SoC ID for SM4450
soc: qcom: pmic_glink: enable altmode for SM8550
soc: qcom: pmic_glink_altmode: add retimer-switch support
soc: qcom: pmic_glink_altmode: handle safe mode when disconnect
soc: qcom: rpmhpd: Add SDX75 power domains
dt-bindings: power: qcom,rpmpd: Add compatible for sdx75
genpd: Makefile: build imx
...
Link: https://lore.kernel.org/r/20230818023338.2484467-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
TI K3 device tree updates for v6.6
New Boards:
- TQ group's TQMaX4XxL AM64 SOM and MBaX4XxL carrier board
- TI's AM62P5 Starter Kit (SK)
New features:
AM625:
- Support for Display (parallel only) - hdmi+audio support for
AM625-SK/BeaglePlay, TC358778 DPI to MIPI-DSI bridge support
for verdin.
- MCU MCAN support and enable of Toradex Verdin
- Toradex Verdin Dahlia audio support
AM62A7:
- MCU MCAN support
- Enable USB Dual Role Device(DRD) support for AM62A7
Starter Kit(SK).
AM64:
- TQ group's tqma64xxl: Overlays for SD-card and wlan.
J721E:
- Main domain CPSW9G and correponding gateway/ethernet
switch expansion - GESI board.
J721S2/AM68:
- New CAN instances, ehrpwm, Display (DSS) and am68-sk HDMI support
- Main domain CPSW2G and correponding gateway/ethernet
switch expansion - GESI board.
J784S4/AM69:
- Boot phase tag marking in device tree
- UFS support
Cleanups and non-urgent fixes:
- Cosmetic style fixups around "=" and "{" whitespace usage.
- Fixups across multiple SoCs/boards for pwm-tbclk to matchup with
bindings
- Serdes header file include/dt-bindings/mux/ti-serdes.h is now
deprecated, use k3-serdes.h in soc dtsi folder.
- All SoCs: Enable GPIO/SDHCI/OSPI/TSADC/C6/C7 DSP nodes at the
board level.
- Fixups for AM62: Crypto powerdomains are conditional to better
represent control of the crypto engines by security controller.
- Fixups for j721e: Duplicate wakeup_i2c node dropped for SoM board.
- Fixups for j721s2/am68: pimux offsets for OSPI.
- Fixups for j784s4/am69: Fixups for pinmux for ospi/adc interrupt
ranges for wkup/main gpios
* tag 'ti-k3-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (68 commits)
arm64: dts: ti: verdin-am62: Add DSI display support
arm64: dts: ti: Add support for the AM62P5 Starter Kit
arm64: dts: ti: Introduce AM62P5 family of SoCs
dt-bindings: arm: ti: Add bindings for AM62P5 SoCs
arm64: dts: ti: k3-am69-sk: Add phase tags marking
arm64: dts: ti: k3-j784s4-evm: Add phase tags marking
arm64: dts: ti: k3-j784s4: Add phase tags marking
arm64: dts: ti: k3-am625-beagleplay: Add HDMI support
arm64: dts: ti: am62x-sk: Add overlay for HDMI audio
arm64: dts: ti: k3-am62x-sk-common: Add HDMI support
arm64: dts: ti: k3-am62-main: Add node for DSS
arm64: dts: ti: k3-am62x-sk-common: Update main-i2c1 frequency
arm64: dts: ti: k3-j721e: Enable C6x DSP nodes at the board level
arm64: dts: ti: k3-j784s4: Enable C7x DSP nodes at the board level
arm64: dts: ti: k3-j721e: Enable C7x DSP nodes at the board level
arm64: dts: ti: k3-*: fix fss node dtbs check warnings
arm64: dts: ti: k3-am64: Enable TSCADC nodes at the board level
arm64: dts: ti: k3-am65: Enable TSCADC nodes at the board level
arm64: dts: ti: k3-j721e: Enable TSCADC nodes at the board level
arm64: dts: ti: k3-j7200: Enable GPIO nodes at the board level
...
Link: https://lore.kernel.org/r/20230814160651.frxohyshd2evp2k4@expenses
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
RISC-V Devicetrees for v6.6
StarFive:
There's only StarFive stuff this time around, starting with some
bindings to get clock ID defines out of the binding headers. Getting
these (and the syscon bindings) in unblocked a swathe of stuff sitting
on the list. Added are: new clock controllers and sycons, ethernet
support, thermal sensors, USB and PCIe PHYs, hwrng, mmc and a few more
besides for the VisionFive v2. The original VisionFive and BeagleV
Starlight got some the thermal sensor support too, as that is supported
by the same driver. These changes make the board actually usable with
something other than an initramfs.
Overlay support by way of the -@ flag set during dtb building, is added
also.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: (26 commits)
riscv: dts: starfive: jh7110: Fix GMAC configuration
riscv: dts: starfive - Add hwrng node for JH7110 SoC
riscv: dts: starfive - Add crypto and DMA node for JH7110
riscv: dts: starfive: Add mmc nodes on VisionFive 2 board
riscv: dts: starfive: enable DCDC1&ALDO4 node in axp15060
riscv: dts: starfive: Add QSPI controller node for StarFive JH7110 SoC
riscv: dts: starfive: jh7110: add the node and pins configuration for tdm
riscv: dts: starfive: jh7110: add dma controller node
riscv: dts: starfive: Add spi node and pins configuration
riscv: dts: starfive: Add USB dts node for JH7110
riscv: dts: starfive: Add USB and PCIe PHY nodes for JH7110
riscv: dts: starfive: jh7110: Add temperature sensor node and thermal-zones
riscv: dts: starfive: jh7100: Add temperature sensor node and thermal-zones
riscv: dts: starfive: visionfive 2: Add configuration of gmac and phy
riscv: dts: starfive: jh7110: Add ethernet device nodes
riscv: dts: starfive: jh7110: Add PLL clocks source in SYSCRG node
riscv: dts: starfive: jh7110: Add syscon nodes
riscv: dts: starfive: jh7110: Add STGCRG/ISPCRG/VOUTCRG nodes
riscv: dts: starfive: jh7110: Add DVP and HDMI TX pixel external clocks
dt-bindings: clock: Add StarFive JH7110 Video-Output clock and reset generator
...
Link: https://lore.kernel.org/r/20230813-naturist-fragment-ac7d10c453ba@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
RINGACC module on K3 SoCs have CFG register region which is usually
configured by a Device Management firmware. But certain entities such as
bootloader (like U-Boot) may have to access them directly. Describe this
region in the binding documentation for completeness of module
description.
Keep the binding compatible with existing DTS files by requiring first
four regions to be present at least.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230809175932.2553156-2-vigneshr@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
USB connector bindings is complete, thus no additional properties should
be allowed. Add missing 'reg' property and change additionalProperties
to false, so the schema will check for anything unexpected. This also
allows to drop the 'reg' from other bindings referencing the
usb-connector.yaml and make it required.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230725102325.76336-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the NVIDIA embedded controller bindings from the free-form text
format to json-schema.
Acked-by: Marc Dietrich <marvin24@gmx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Convert the NVIDIA Tegra AHB bindings from the free-form text format to
json-schema.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Convert the Tegra flow controller bindings from the free-form text
format to json-schema.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
On Qualcomm platforms, most subsystems (e.g. audio/modem DSP) are
described as remote processors in the device tree, with a dedicated
node where properties and services related to them can be described.
The Resource Power Manager (RPM) is also such a subsystem, with a
remote processor that is running a special firmware. Unfortunately,
the RPM never got a dedicated node representing it properly in the
device tree. Most of the RPM services are described below a top-level
/smd or /rpm-glink node.
However, SMD/GLINK is just one of the communication channels to the RPM
firmware. For example, the MPM interrupt functionality provided by the
RPM does not use SMD/GLINK but writes directly to a special memory
region allocated by the RPM firmware in combination with a mailbox.
Currently there is no good place in the device tree to describe this
functionality. It doesn't belong below SMD/GLINK but it's not an
independent top-level device either.
Introduce a new "qcom,rpm-proc" compatible that allows describing the
RPM as a remote processor/subsystem like all others. The SMD/GLINK node
is moved to a "smd-edge"/"glink-edge" subnode consistent with other
existing bindings. Additional subnodes (e.g. interrupt-controller for
MPM, rpm-master-stats) can be also added there.
Deprecate using the old top-level /smd node since all SMD edges
are now specified as subnodes of the remote processor.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-6-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
