Document the AD3530/AD3530R (8-channel) and AD3531/AD3531R (4-channel)
low-power, 16-bit, buffered voltage output DACs with software-
programmable gain controls. They provide full-scale output spans of 2.5V
or 5V for reference voltages of 2.5V. These devices operate on a single
2.7V to 5.5V supply and are guaranteed to be monotonic by design.
The "R" variants include a 2.5V, 5ppm/°C internal reference, which is
disabled by default.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Link: https://patch.msgid.link/20250429-togreg-v7-2-0af9c543b545@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Merge from Jonathan:
IIO: 2nd set of fixes for the 6.13 cycle.
Given timing so late in cycle and that they are all confined to
specific drivers, it is fine for these to go upstream early in the
6.14 cycle.
hid-sensors
- Handle processed attention channel rather than just returning
an error.
adi,ad3552r
- Fix output ranges for ad3541r and ad3542r.
- Clear the reset status flag so that we can pick up any resets
during operation.
adi,ad5791
- Fix a misleading dt binding example where the sense of the
interrupt was reversed.
adi,ad7606
- Fix some hard coded offsets that should be taking the number of
channels on a particular part into account. These were missed
due to some racing changes.
ams,as73211
- Fix an off by one in optimized path for just reading the colour
channels.
bosch,bme680
- Fix type of variable passed as pointer, ensuring it works on
big endian systems and doesn't expose uninitialized data.
* tag 'iio-fixes-for-6.13b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: dac: ad3552r-hs: clear reset status flag
iio: dac: ad3552r-common: fix ad3541/2r ranges
iio: chemical: bme680: Fix uninitialized variable in __bme680_read_raw()
iio: light: as73211: fix channel handling in only-color triggered buffer
dt-bindings: iio: dac: ad5791: ldac gpio is active low
iio: hid-sensor-prox: Fix invalid read_raw for attention
iio: adc: ad7606: Fix hardcoded offset in the ADC channels
Add a new compatible and related bindigns for the fpga-based
"ad3552r" AXI IP core, a variant of the generic AXI DAC IP.
The AXI "ad3552r" IP is a very similar HDL (fpga) variant of the
generic AXI "DAC" IP, intended to control ad3552r and similar chips,
mainly to reach high speed transfer rates using a QSPI DDR
(dobule-data-rate) interface.
The ad3552r device is defined as a child of the AXI DAC, that in
this case is acting as an SPI controller.
Note, #io-backend is present because it is possible (in theory anyway)
to use a separate controller for the control path than that used
for the datapath.
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241028-wip-bl-ad3552r-axi-v0-iio-testing-v9-2-f6960b4f9719@kernel-space.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The adi,gain-scaling-p/n values are an inverted log2,
so initial naming was set correctly, but the driver uses just
adi,gain-scaling-p/n, and if fdt is created accordingly with
the fdt bindings documentation, driver fails the probe.
Observing that:
- the Linux driver is the only consumer,
- there are no upstreamed dts nodes related to ad3552r,
the fix to the documentation side is preferred and less-risk.
Fixes: b0a96c5f59 ("dt-bindings: iio: dac: Add adi,ad3552r.yaml")
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240522150141.1776196-2-adureghello@baylibre.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
access-controllers is an optional property that allows a peripheral to
refer to one or more domain access controller(s).
Description of this property is added to all peripheral binding files of
the peripheral under the STM32 firewall controller. It allows an accurate
representation of the hardware, where various peripherals are connected
to a firewall bus. The firewall can then check the peripheral accesses
before allowing its device to probe.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220816124321.67817-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Pull devicetree updates from Rob Herring:
"Bindings:
- Add spi-peripheral-props.yaml references to various SPI device
bindings
- Convert qcom,pm8916-wdt, ds1307, Qualcomm BAM DMA, is31fl319x,
skyworks,aat1290, Rockchip EMAC, gpio-ir-receiver, ahci-ceva, Arm
CCN PMU, rda,8810pl-intc, sil,sii9022, ps2-gpio, and
arm-firmware-suite bindings to DT schema format
- New bindings for Arm virtual platforms display, Qualcomm IMEM
memory region, Samsung S5PV210 ChipID, EM Microelectronic EM3027
RTC, and arm,cortex-a78ae
- Add vendor prefixes for asrock, bytedance, hxt, ingrasys, inventec,
quanta, and densitron
- Add missing MSI and IOMMU properties to host-generic-pci
- Remove bindings for removed EFM32 platform
- Remove old chosen.txt binding (replaced by schema)
- Treewide add missing type information for properties
- Treewide fixing of typos and its vs. it's in bindings. Its all good
now.
- Drop unnecessary quoting in power related schemas
- Several LED binding updates which didn't get picked up
- Move various bindings to proper directories
DT core code:
- Convert unittest GPIO related tests to use fwnode
- Check ima-kexec-buffer against memory bounds
- Print reserved-memory allocation/reservation failures as errors
- Cleanup early_init_dt_reserve_memory_arch()
- Simplify of_overlay_fdt_apply() tail"
* tag 'devicetree-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (65 commits)
dt-bindings: mtd: microchip,mchp48l640: use spi-peripheral-props.yaml
dt-bindings: power: supply: drop quotes when not needed
dt-bindings: power: reset: drop quotes when not needed
dt-bindings: power: drop quotes when not needed
dt-bindings: PCI: host-generic-pci: Allow IOMMU and MSI properties
of/fdt: declared return type does not match actual return type
devicetree/bindings: correct possessive "its" typos
dt-bindings: net: convert emac_rockchip.txt to YAML
dt-bindings: eeprom: microchip,93lc46b: move to eeprom directory
dt-bindings: eeprom: at25: use spi-peripheral-props.yaml
dt-bindings: display: use spi-peripheral-props.yaml
dt-bindings: watchdog: qcom,pm8916-wdt: convert to dtschema
dt-bindings: power: reset: qcom,pon: use absolute path to other schema
dt-bindings: iio/dac: adi,ad5766: Add missing type to 'output-range-microvolts'
dt-bindings: power: supply: charger-manager: Add missing type for 'cm-battery-stat'
dt-bindings: panel: raydium,rm67191: Add missing type to 'video-mode'
of/fdt: Clean up early_init_dt_reserve_memory_arch()
dt-bindings: PCI: fsl,imx6q-pcie: Add missing type for 'reset-gpio-active-high'
dt-bindings: rtc: Add EM Microelectronic EM3027 bindings
dt-bindings: rtc: ds1307: Convert to json-schema
...
Pull char / misc / other smaller driver subsystem updates from Greg KH:
"Here is the large set of char, misc, and other driver subsystem
updates for 5.19-rc1. The merge request for this has been delayed as I
wanted to get lots of linux-next testing due to some late arrivals of
changes for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers and
cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no
reported problems"
* tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (387 commits)
habanalabs: use separate structure info for each error collect data
habanalabs: fix missing handle shift during mmap
habanalabs: remove hdev from hl_ctx_get args
habanalabs: do MMU prefetch as deferred work
habanalabs: order memory manager messages
habanalabs: return -EFAULT on copy_to_user error
habanalabs: use NULL for eventfd
habanalabs: update firmware header
habanalabs: add support for notification via eventfd
habanalabs: add topic to memory manager buffer
habanalabs: handle race in driver fini
habanalabs: add device memory scrub ability through debugfs
habanalabs: use unified memory manager for CB flow
habanalabs: unified memory manager new code for CB flow
habanalabs/gaudi: set arbitration timeout to a high value
habanalabs: add put by handle method to memory manager
habanalabs: hide memory manager page shift
habanalabs: Add separate poll interval value for protocol
habanalabs: use get_task_pid() to take PID
habanalabs: add prefetch flag to the MAP operation
...
Jonathan writes:
First set of IIO new device support, features and cleanup for 5.19
Usual mixed bag. Stand out this time is Andy Shevchenko's continuing
effort to move drivers over the generic firmware interfaces.
Device support
* sprd,sc2720
- upm9620 binding addition.
- Refactor and support for sc2720, sc2721 and sc2730.
* ti,ads1015
- Refactor driver and add support for TLA2024.
Device support (IDs only)
* invensense,mpu6050
- Add ID for ICM-20608-D.
* st,accel:
- Add ID for lis302dl.
* st,lsm6dsx
- Add support for ASM330LHHX (can fallback to LSM6DSR.)
Features
* convert drivers to device properties
- IIO core
- adi,ad7266
- adi,adis16480
- adi,adxl355
- bosch,bmi160
- domintech,dmard06
- fsl,fxas21002c
- invensense,mpu3050
- linear,ltc2983
- linear,ltc2632
- maxbotix,mb1232
- maxim,max31856
- maxim,max31865
- multiplexer
- ping
- rescale
- taos,tsl2772
* core
- Add runtime check on whether realbits fit in storagebits for each
channel.
* adi,ad_sigma_delta
- Add sequencer support and relevant update_scan_mode callbacks for
adi,ad7192 and adi,ad7124.
Cleanup and minor fixes
* MAINTAINERS
- Update Lorenzo Bianconi's email address for IIO drivers.
- Add entry for ad3552r and update maintainer in dt-binding doc.
* tree-wide
- Replace strtobool() with kstrtobool().
- Drop false OF dependencies.
* core
- Tidy up and document IIO modes.
- Take iio_buffer_enabled() out of header allowing current_mode to be
moved to the opaque structure.
- As all kfifo buffers use the same mode value, drop that parameter
and set it unconditionally.
- White space fixes and similar.
- Drop use of list iterator variable for
list_for_each_entry_continue_reverse and use list_prepare_entry to
restart.
* sysfs-trigger
- Replace use of 'found' variable with dedicate list iterator variable.
* adi,ad7124
- Drop misleading shift.
* adi,ad2s1210
- Remove redundant local variable assignment.
* adi,adis16480
- Use local device pointer to reduce repetition.
- Improve handling of clocks.
* domintech,dmard09
- White space.
* dummy driver
- Improve error handling.
* fsl,mma8452
- Add missing documentation of name element.
* invensense,mpu3050
- Stop remove() returning non 0.
* kionix,kxsd9
- White space.
* linear,ltc2688
- Use local variable for struct device.
- Combine of_node_put() error handling paths.
* linear,ltc2983
- Avoid use of constants in messages where a define is available.
* microchip,mcp4131
- Fix compatible in dt example.
* pni,rm3100
- Stop directly accessing iio_dev->current_mode just to find out
if the buffer is enabled.
* renesas,rzg2l
- Relax kconfig constraint to include newer devices.
* sprd,sc27xx
- Fix wrong scaling mask.
- Improve the calibration values.
* samsung,ssp
- Replace a 'found' variable in favor of an explicit value that was
found.
* sensortek,stk3xx
- Add proximity-near-level binding and driver support.
* st,st_sensors:
- Drop unused accel_type enum.
- Return early in *_write_raw()
- Drop unnecessary locking in _avail functions.
- Add local lock to protect odr against concurrent updates allowing
mlock to no longer be used outside of the core.
- Use iio_device_claim_direct_mode() rather than racy checking of
the current mode.
* st,stmpe-adc
- Fix checks on wait_for_completion_timeout().
- Allow use of of_device_id for matching.
* st,stm32-dfsdm
- Stop accessing iio_dev->current_mode to find out if the buffer
is enabled (so we can hide that variable in the opaque structure)
* st,vl53l0x
- Fix checks on wait_for_completion_timeout.
* ti,ads1015
- Add missing ID for ti,ads1115 in binding doc.
- Convert from repeated chip ID look up to selecting static const
data.
- Switch to read_avail() callback.
* ti,ads8688
- Use of_device_id for driver matching.
* ti,palmas-adc
- Drop a warning on minor calibration mismatch leading to slightly
negative values after applying the calibration.
* tag 'iio-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (95 commits)
iio: ti-ads8688: use of_device_id for OF matching
iio: stmpe-adc: use of_device_id for OF matching
dt-bindings: iio: Fix incorrect compatible strings in examples
iio: gyro: mpu3050: Make mpu3050_common_remove() return void
iio: dac: ltc2632: Make use of device properties
iio: temperature: max31865: Make use of device properties
iio: proximity: mb1232: Switch to use fwnode_irq_get()
iio: imu: adis16480: Improve getting the optional clocks
iio: imu: adis16480: Use temporary variable for struct device
iio: imu: adis16480: Make use of device properties
staging: iio: ad2s1210: remove redundant assignment to variable negative
iio: adc: sc27xx: add support for PMIC sc2730
iio: adc: sc27xx: add support for PMIC sc2720 and sc2721
iio: adc: sc27xx: refactor some functions for support more PMiCs
iio: adc: sc27xx: structure adjustment and optimization
iio: adc: sc27xx: Fine tune the scale calibration values
iio: adc: sc27xx: fix read big scale voltage not right
dt-bindings:iio:adc: add sprd,ump9620-adc dt-binding
iio: proximity: stk3310: Export near level property for proximity sensor
dt-bindings: iio: light: stk33xx: Add proximity-near-level
...
