Pull pin control updates from Linus Walleij:
"An especially linear and sparse improvement and new drivers release.
Nothing exciting. The biggest change in Bartosz changes to make
gpiochip set/get calls return error codes (something we should have
fixed ages ago but is now finally getting fixed.)
Core changes:
- Add the devres devm_pinctrl_register_mappings() call that can
register some pin control machine mappings and have them go away
with the associated device
New drivers:
- Support for the Mediatek MT6893 and MT8196 SoCs
- Support for the Renesas RZ/V2N SoC
- Support for the NXP Freescale i.MX943 SoC
Improvements:
- Per-SoC suspend/resume callbacks in the Samsung drivers
- Set all pins as input (High-Z) at probe in the MCP23S08 driver
- Switch most GPIO chips to use the setters/getters with a return
value
- EGPIO support in the Qualcomm QCM2290 driver
- Fix up the number of available GPIO lines in Qualcomm QCS8300 and
QCS615"
* tag 'pinctrl-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits)
pinctrl: freescale: Add support for imx943 pinctrl
pinctrl: core: add devm_pinctrl_register_mappings()
pinctrl: remove extern specifier for functions in machine.h
pinctrl: mediatek: eint: Fix invalid pointer dereference for v1 platforms
pinctrl: freescale: Enable driver if platform is enabled.
pinctrl: freescale: Depend imx-scu driver on OF
pinctrl: armada-37xx: propagate error from armada_37xx_pmx_set_by_name()
pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get_direction()
pinctrl: armada-37xx: propagate error from armada_37xx_pmx_gpio_set_direction()
pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get()
pinctrl: armada-37xx: propagate error from armada_37xx_gpio_direction_output()
pinctrl: armada-37xx: set GPIO output value before setting direction
pinctrl: armada-37xx: use correct OUTPUT_VAL register for GPIOs > 31
pinctrl: meson: Drop unused aml_pctl_find_group_by_name()
pinctrl: at91: Fix possible out-of-boundary access
pinctrl: add stubs for OF-specific pinconf functions
pinctrl: qcom: correct the ngpios entry for QCS8300
pinctrl: qcom: correct the ngpios entry for QCS615
dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs8300
dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs615
...
Pull clk updates from Stephen Boyd:
"This has been a semi-quiet cycle. The core framework remains unchanged
this time around.
In terms of shiny new code though, we have support for the SpacemiT K1
SoC, Sophgo SG2044, and T-HEAD TH1520 VO clk drivers joining the usual
silicon players like Qualcomm, Samsung, Allwinner, and Renesas.
Surprisingly, the Qualcomm pile was smaller than usual but that is
likely because they put one SoC support inside a driver for a
different SoC that is very similar.
Other than all those new clk drivers there are the usual clk data
updates to fix parents, frequency tables, and add missing clks along
with some Kconfig changes to make compile testing simpler and even
more DT binding conversions to boot.
The exciting part is still the new SoC support like SpacemiT and
Sophgo support though, which really dominate the diffstat because they
introduce a whole new silicon vendor clk driver.
New Drivers:
- Camera clock controller driver for Qualcomm QCS8300
- DE (display engine) 3.3 clocks on Allwinner H616
- Samsung ExynosAutov920 CPU cluster CL0, CL1 and CL2 clock controllers
- Video Output (VO) subsystem clk controller in the T-HEAD TH1520 SoC
- Clock driver for Sophgo SG2044
- Clock driver for SpacemiT K1 SoC
- Renesas RZ/V2N (R9A09G056) SoC clk driver
Updates:
- Correct data in various SoC clk drivers
- Allow clkaN to be optional in the Qualcomm RPMh clock controller
driver if command db doesn't define it
- Change Kconfig options to not enable by default during compile
testing
- Add missing clks in various SoC clk drivers
- Remove some duplicate clk DT bindings and convert some more to
YAML"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits)
clk: qcom: gcc-x1e80100: Set FORCE MEM CORE for UFS clocks
clk: qcom: gcc: Set FORCE_MEM_CORE_ON for gcc_ufs_axi_clk for 8650/8750
clk: qcom: rpmh: make clkaN optional
clk: qcom: Add support for Camera Clock Controller on QCS8300
clk: rockchip: rk3528: add slab.h header include
clk: rockchip: rk3576: add missing slab.h include
clk: meson: Do not enable by default during compile testing
clk: meson-g12a: add missing fclk_div2 to spicc
clk: qcom: gcc-msm8939: Fix mclk0 & mclk1 for 24 MHz
clk: rockchip: rename gate-grf clk file
clk: rockchip: rename branch_muxgrf to branch_grf_mux
clk: sunxi-ng: ccu: add Display Engine 3.3 (DE33) support
dt-bindings: allwinner: add H616 DE33 clock binding
clk: samsung: correct clock summary for hsi1 block
dt-bindings: clock: add SM6350 QCOM video clock bindings
clk: rockchip: Pass NULL as reg pointer when registering GRF MMC clocks
clk: sunxi-ng: h616: Add LVDS reset for LCD TCON
dt-bindings: clock: sun50i-h616-ccu: Add LVDS reset
clk: rockchip: rk3036: mark ddrphy as critical
clk: rockchip: rk3036: fix implementation of usb480m clock mux
...
Samsung pinctrl drivers changes for v6.15
1. Add pin controller drivers for newly usptreamed Samsung Exynos2200
and Exynos7870.
2. Correct filter configuration offset of some of Google GS101 SoC pin
banks, which later is supposed to be used during system
suspend/resume.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The A523 contains a pin controller similar to previous SoCs, although
using 10 GPIO banks (PortB-PortK), all of them being IRQ capable.
With this SoC we introduce a new style of binding, where the pinmux values
for each pin group are stored in the new "allwinner,pinmux" property in
the DT node, instead of requiring every driver to store a mapping between
the function names and the required pinmux.
Add a new binding file, since all the different variants of the old
binding are making the file a bit unwieldy to handle already, and the new
property would make the situation worse.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/20250306235827.4895-7-andre.przywara@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
SG2042 introduces a simple pinctrl device for all configurable pins.
For the SG2042 pinctl register file, each register (32 bits) is
responsible for two pins, each occupying the upper 16 bits and lower
16 bits of the register. It supports setting pull up/down, drive
strength and input schmitt trigger.
Add support for SG2042 pinctrl device.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/20250211051801.470800-6-inochiama@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: renesas: Updates for v6.14 (take two)
- Add support for alpha-numerical port references on the RZ/V2H SoC,
- Add support for the RZ/G3E (R9A09G047) Soc.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Pull pin control updates from Linus Walleij:
"No core changes this time.
New drivers:
- Xlinix Versal pin control driver
- Ocelot LAN969x pin control driver
- T-Head TH1520 RISC-V SoC pin control driver
- Qualcomm SM8750, IPQ5424, QCS8300, SAR2130P and QCS615 SoC pin
control drivers
- Qualcomm SM8750 LPASS (low power audio subsystem) pin control
driver
- Qualcomm PM8937 mixsig IC pin control support, GPIO and MPP
(multi-purpose-pin)
- Samsung Exynos8895 and Exynos9810 SoC pin control driver
- SpacemiT K1 SoC pin control driver
- Airhoa EN7581 IC pin control driver
Improvements:
- The Renesas subdriver now supports schmitt-trigger and open drain
pin configurations if the hardware supports it
- Support GPIOF and GPIOG banks in the Aspeed G6 SoC
- Support the DSW community in the Intel Elkhartlake SoC"
* tag 'pinctrl-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits)
pinctrl: airoha: Use unsigned long for bit search
pinctrl: k210: Undef K210_PC_DEFAULT
pinctrl: qcom: spmi: fix debugfs drive strength
pinctrl: qcom: Add sm8750 pinctrl driver
dt-bindings: pinctrl: qcom: Add sm8750 pinctrl
pinctrl: cy8c95x0: remove unneeded goto labels
pinctrl: cy8c95x0: embed iterator to the for-loop
pinctrl: cy8c95x0: Use temporary variable for struct device
pinctrl: cy8c95x0: use flexible sleeping in reset function
pinctrl: cy8c95x0: switch to using devm_regulator_get_enable()
pinctrl: cy8c95x0: Use 2-argument strscpy()
dt-bindings: pinctrl: sx150xq: allow gpio line naming
pinctrl: single: add marvell,pxa1908-padconf compatible
dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible
dt-bindings: pinctrl: correct typo of description for cv1800
pinctrl: qcom: spmi-mpp: Add PM8937 compatible
dt-bindings: pinctrl: qcom,pmic-mpp: Document PM8937 compatible
pinctrl: qcom-pmic-gpio: add support for PM8937
dt-bindings: pinctrl: qcom,pmic-gpio: add PM8937
pinctrl: Use of_property_present() for non-boolean properties
...
Samsung pinctrl drivers changes for v6.13
1. Add new pin controller drivers for new Samsung SoCs: Exynos8895,
Exynos9810, Exynos990.
2. Correct the condition when applying further interrupt constraints on
certain Samsung pin controllers. The condition was simply not
effective.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
