The gsc_hdcp_ops is duplicated and initialized exactly the same way in
two different places (for i915 and xe), and requires forward
declarations for all the hooks. Deduplicate, and make the functions
static.
There are slight differences in the i915 and xe implementations of
intel_hdcp_gsc_init() and intel_hdcp_gsc_fini(). Take the best of both,
and improve.
We need to expose intel_hdcp_gsc_hdcp2_init() and
intel_hdcp_gsc_free_message() for this, and create the latter for xe.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/21e7871b35d4c7d13f016b5ecb4f10e5be72c531.1745524803.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We haven't updated the DRIVER_TIMESTAMP since commit 3570bd989a
("drm/i915: Update DRIVER_DATE to 20230929") 1½ years ago. Before then,
the previous update was commit 139caf7ca2 ("drm/i915: Update
DRIVER_DATE to 20201103") 4+ years ago. The DRIVER_DATE has also been
removed altogether.
We've used the DRIVER_TIMESTAMP to log suggestions to file bugs on GPU
hangs when they happen on a driver less than six months old. Combined
with the sporadic DRIVER_TIMESTAMP updates, we really haven't logged the
suggestions for years.
Just stop logging the suggestion to file bugs altogether, and remove
DRIVER_TIMESTAMP. This doesn't really change anything wrt to logging GPU
errors or how we handle bugs. And effectively we already stopped logging
the message a year ago when we stopped updating DRIVER_TIMESTAMP.
Instead, add an unconditional message about the GPU error state
location.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20250429115055.2133143-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Minimum HBlank is programmed to address jitter for high resolutions with
high refresh rates that have small Hblank, specifically where Hblank is
smaller than one MTP.
TODO: Add the min_hblank calculation for hdmi as well.
v2: move from intel_audio.c to intel_dp.c
some correction in link_bpp_x16 (Imre)
v3: min_hblank for 8b/10b MST and 128b/132b SST/MST
handle error for intel_dp_mst_dsc_get_slice_count
reset min_hblank before disabling transcoder (Imre)
v4: compute link_bpp_x16 within compute_min_hblank,
return error in case of compute failure
call compute_min_hblank() before vrr_compute_config (Imre)
v5: readout MIN_HBLAN reg for Xe3+
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250424-hblank-v7-2-8b002f1506cc@intel.com
Now that include/linux/bits.h implements fixed-width GENMASK_U*(), use
them to implement the i915/xe specific macros. Converting each driver
to use the generic macros are left for later, when/if other
driver-specific macros are also generalized.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Following the convention, convert intel_hdmi.c to use an intel_connector
pointer everywhere, calling this pointer connector. If the intel
connector must be casted from a drm_connector, call this pointer
_connector and use this pointer only for the casting.
v2: Use for_each_new_intel_connector_in_state(). (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250428134716.3396802-3-imre.deak@intel.com
To deterministically capture the transition of the state machine going from
SRDOFFACK to IDLE, the delayed V. Blank should be at least one line after
the non-delayed V. Blank.
Ensure this by adding new interface into intel_psr to query number of lines
needed for vblank delay and call it from intel_crtc_vblank_delay.
v3: use existing intel_crtc_vblank_delay mechanism
v2: apply limits only when needed (VRR TG vs. Legacy TG)
Bspec: 69897
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250423102704.1368310-1-jouni.hogander@intel.com
Currently we disable the VGA plane from various places, sometimes
multiple times in the same init/resume sequence. Get rid of all this
mess and do it just once. The most correct place seems to be just
after intel_early_display_was() as that one applies various workarounds
that need to be in place before we touch any planes (including the
VGA plane).
Actually, we do still have a second caller in
vlv_display_power_well_init(). I think we still need that as the reset
value of VGACNTR is 0x0 and thus technically the VGA plane will be
(at least partially) enabled after the power well has been toggled.
In both cases we have the necessary power reference already held
(INIT power domain for load/resume case, and the display power well
itself being what we need for vlv_display_power_well_init()).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250417114454.12836-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Add an interface in debugfs which will help in debugging LOBF
feature.
v1: Initial version.
v2:
- Remove FORCE_EN flag. [Jouni]
- Change prefix from I915 to INTEL. [Jani]
- Use u8 instead of bool for lobf-debug flag. [Jani]
v3:
- Use intel_connector instead of display. [Jani]
- Remove edp connector check as it was already present
in caller function. [Jani]
- Remove loop of searching edp encoder which is directly
accessible from intel_connector. [Jani]
v4:
- Simplify alpm debug to bool instead of bit-mask. [Jani]
v5:
- Remove READ_ONCE(). [Jani]
- Modify variable name to *_disable_*. [Jouni]
v6: Improved debug print. [Jouni]
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250423092334.2294483-8-animesh.manna@intel.com
For every commit the dependent condition for LOBF is checked
and accordingly update has_lobf flag which will be used
to update the ALPM_CTL register during commit.
v1: Initial version.
v2: Avoid reading h/w register without has_lobf check. [Jani]
v3: Update LOBF in post plane update instead of separate function. [Jouni]
v4:
- Add lobf disable print. [Jouni]
- Simplify condition check for enabling/disabling lobf. [Jouni]
v5: Disable LOBF in pre_plane_update(). [Jouni]
v6: use lobf flag of old_crtc_state and write 0 into ALPM_CTL. [Jouni]
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250423092334.2294483-7-animesh.manna@intel.com
Enablement of LOBF is added in post plane update whenever
has_lobf flag is set. As LOBF can be enabled in non-psr
case as well so adding in post plane update. There is no
change of configuring alpm with psr path.
v1: Initial version.
v2: Use encoder-mask to find the associated encoder from
crtc-state. [Jani]
v3: Remove alpm_configure from intel_psr.c. [Jouni]
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250423092334.2294483-3-animesh.manna@intel.com
