Because the layer/window enable/disable is take effect by vsync, if the
overlay configuration of these layers does not follow vsync and
takes effect immediately instead, when multiple layers are dynamically
enable/disable, inconsistent display contents may be seen on the screen.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250318062024.4555-1-andyshrk@163.com
Add support for gamma LUT in VOP2 driver. The implementation was inspired
by one found in VOP1 driver. Blue and red channels in gamma LUT register
write were swapped with respect to how gamma LUT values are written in
VOP1. Gamma LUT port selection was added before the write of new gamma LUT
table.
If the current SoC is rk356x, check if no other CRTC has gamma LUT enabled
in atomic_check (only one video port can use gamma LUT at a time) and
disable gamma LUT before the LUT table write.
If the current SoC isn't rk356x, "seamless" gamma lut update is performed
similarly to how it was done in the case of RK3399 in VOP1[1]. In seamless
update gamma LUT disable before the write isn't necessary, check if no
other CRTC has gamma LUT enabled is also not necessary, different register
is being used to select gamma LUT port[2] and after setting DSP_LUT_EN bit,
GAMMA_UPDATE_EN bit is set[3].
Gamma size is set and drm color management is enabled for each video port's
CRTC except ones which have no associated device.
Patch was tested on RK3566 (Pinetab2). When using userspace tools
which set eg. constant color temperature no issues were noticed. When
using userspace tools which adjust eg. color temperature the slight screen
flicker is visible probably because of gamma LUT disable needed in the
case of RK356x before gamma LUT write.
Compare behaviour of eg.:
```
gammastep -O 3000
```
To eg.:
```
gammastep -l 53:23 -t 6000:3000
```
In latter case color temperature is slowly adjusted at the beginning which
causes screen to slighly flicker. Then it adjusts every few seconds which
also causes slight screen flicker.
[1] https://lists.infradead.org/pipermail/linux-rockchip/2021-October/028132.html
[2] https://lore.kernel.org/linux-rockchip/48249708-8c05-40d2-a5d8-23de960c5a77@rock-chips.com/
[3] https://github.com/radxa/kernel/blob/linux-6.1-stan-rkr1/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c#L3437
Helped-by: Daniel Stone <daniel@fooishbar.org>
Helped-by: Dragan Simic <dsimic@manjaro.org>
Helped-by: Diederik de Haas <didi.debian@cknow.org>
Helped-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Piotr Zalewski <pZ010001011111@proton.me>
Reviewed-by: Andy Yan <andyshrk@163.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241101185545.559090-3-pZ010001011111@proton.me
The different VOP variants support different maximum resolutions. Reject
resolutions that are not supported by a specific variant.
This hasn't been a problem in the upstream driver so far as 1920x1080
has been the maximum resolution supported by the HDMI driver and that
resolution is supported by all VOP variants. Now with higher resolutions
supported in the HDMI driver we have to limit the resolutions to the
ones supported by the VOP.
The actual maximum resolutions are taken from the Rockchip downstream
Kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
[dropped the vdisplay > height check after talking to Sascha, as according to
the vendor code "Actually vop hardware has no output height limit"
(from vendor commit "drm/rockchip: vop: get rid of max_output.height check")
and the height-check broke the px30-minievb display]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216102447.582905-2-s.hauer@pengutronix.de
The VOP2 unit is found on Rockchip SoCs beginning with rk3566/rk3568.
It replaces the VOP unit found in the older Rockchip SoCs.
This driver has been derived from the downstream Rockchip Kernel and
heavily modified:
- All nonstandard DRM properties have been removed
- dropped struct vop2_plane_state and pass around less data between
functions
- Dropped all DRM_FORMAT_* not known on upstream
- rework register access to get rid of excessively used macros
- Drop all waiting for framesyncs
The driver is tested with HDMI and MIPI-DSI display on a RK3568-EVB
board. Overlay support is tested with the modetest utility. AFBC support
on the cluster windows is tested with weston-simple-dmabuf-egl on
weston using the (yet to be upstreamed) panfrost driver support.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Co-Developed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
[dt-binding-header:]
Acked-by: Rob Herring <robh@kernel.org>
[moved dt-binding header from dt-nodes patch to here
and made checkpatch --strict happier]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220422072841.2206452-23-s.hauer@pengutronix.de
