Context Timestamp (CTX_TIMESTAMP) in the LRC accumulates the run ticks
of the context, but only gets updated when the context switches out. In
order to check how long a context has been active before it switches
out, two things are required:
(1) Determine if the context is running:
To do so, we program the WA BB to set an initial value for CTX_TIMESTAMP
in the LRC. The value chosen is 1 since 0 is the initial value when the
LRC is initialized. During a query, we just check for this value to
determine if the context is active. If the context switched out, it
would overwrite this location with the actual CTX_TIMESTAMP MMIO value.
Note that WA BB runs as the last part of the context restore, so reusing
this LRC location will not clobber anything.
(2) Calculate the time that the context has been active for:
The CTX_TIMESTAMP ticks only when the context is active. If a context is
active, we just use the CTX_TIMESTAMP MMIO as the new value of
utilization. While doing so, we need to read the CTX_TIMESTAMP MMIO
for the specific engine instance. Since we do not know which instance
the context is running on until it is scheduled, we also read the
ENGINE_ID MMIO in the WA BB and store it in the PPHSWP.
Using the above 2 instructions in a WA BB, capture active context
utilization.
v2: (Matt Brost)
- This breaks TDR, fix it by saving the CTX_TIMESTAMP register
"drm/xe: Save CTX_TIMESTAMP mmio value instead of LRC value"
- Drop tile from LRC if using gt
"drm/xe: Save the gt pointer in LRC and drop the tile"
v3:
- Remove helpers for bb_per_ctx_ptr (Matt)
- Add define for context active value (Matt)
- Use 64 bit CTX TIMESTAMP for platforms that support it. For platforms
that don't, live with the rare race. (Matt, Lucas)
- Convert engine id to hwe and get the MMIO value (Lucas)
- Correct commit message on when WA BB runs (Lucas)
v4:
- s/GRAPHICS_VER(...)/xe->info.has_64bit_timestamp/ (Matt)
- Drop support for active utilization on a VF (CI failure)
- In xe_lrc_init ensure the lrc value is 0 to begin with (CI regression)
v5:
- Minor checkpatch fix
- Squash into previous commit and make TDR use 32-bit time
- Update code comment to match commit msg
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4532
Cc: <stable@vger.kernel.org> # v6.13+
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250509161159.2173069-8-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 82b98cadb0)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Userspace is required to mark a queue as using PXP to guarantee that the
PXP instructions will work. In addition to managing the PXP sessions,
when a PXP queue is created the driver will set the relevant bits in
its context control register.
On submission of a valid PXP queue, the driver will validate all
encrypted objects mapped to the VM to ensured they were encrypted with
the current key.
v2: Remove pxp_types include outside of PXP code (Jani), better comments
and code cleanup (John)
v3: split the internal PXP management to a separate patch for ease of
review. re-order ioctl checks to always return -EINVAL if parameters are
invalid, rebase on msix changes.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-9-daniele.ceraolospurio@intel.com
When we decide to kill a job, (from guc_exec_queue_timedout_job), we could
end up with 4 possible scenarios at this starting point of this decision:
1. the guc-captured register-dump is already there.
2. the driver is wedged.mode > 1, so GuC-engine-reset / GuC-err-capture
will not happen.
3. the user has started the driver in execlist-submission mode.
4. the guc-captured register-dump is not ready yet so we force GuC to kill
that context now, but:
A. we don't know yet if GuC will be successful on the engine-reset
and get the guc-err-capture, else kmd will do a manual reset later
OR B. guc will be successful and we will get a guc-err-capture
shortly.
So to accomdate the scenarios of 2 and 4A, we will need to do a manual KMD
capture first(which is not be reliable in guc-submission mode) and decide
later if we need to use that for the cases of 2 or 4A. So this flow is
part of the implementation for this patch.
Provide xe_guc_capture_get_reg_desc_list to get the register dscriptor
list.
Add manual capture by read from hw engine if GuC capture is not ready.
If it becomes ready at later time, GuC sourced data will be used.
Although there may only be a small delay between (1) the check for whether
guc-err-capture is available at the start of guc_exec_queue_timedout_job
and (2) the decision on using a valid guc-err-capture or manual-capture,
lets not take any chances and lock the matching node down so it doesn't
get re-claimed if GuC-Err-Capture subsystem is running out of pre-cached
nodes.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004193428.3311145-6-zhanjun.dong@intel.com
For non-RCS engines, nearly all of the LRC state is composed of MI
instructions (specifically MI_LOAD_REGISTER_IMM). Providing a dump
interface allows us to verify that the context image layout matches
what's documented in the bspec, and also allows us to check whether LRC
workarounds are being properly captured by the default state we record
at startup.
For now, the non-MI instructions found in the RCS and CCS engines will
dump as "unknown;" parsing of those will be added in a follow-up patch.
v2:
- Add raw instruction header as well as decoded meaning. (Lucas)
- Check that num_dw isn't greater than remaining_dw for instructions
that have a "# dwords" field. (Lucas)
- Clarify comment about skipping over ppHWSP. (Lucas)
Bspec: 64993
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20231016163449.1300701-13-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Xe, is a new driver for Intel GPUs that supports both integrated and
discrete platforms starting with Tiger Lake (first Intel Xe Architecture).
The code is at a stage where it is already functional and has experimental
support for multiple platforms starting from Tiger Lake, with initial
support implemented in Mesa (for Iris and Anv, our OpenGL and Vulkan
drivers), as well as in NEO (for OpenCL and Level0).
The new Xe driver leverages a lot from i915.
As for display, the intent is to share the display code with the i915
driver so that there is maximum reuse there. But it is not added
in this patch.
This initial work is a collaboration of many people and unfortunately
the big squashed patch won't fully honor the proper credits. But let's
get some git quick stats so we can at least try to preserve some of the
credits:
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Co-developed-by: Matthew Auld <matthew.auld@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Co-developed-by: Francois Dugast <francois.dugast@intel.com>
Co-developed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Co-developed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Co-developed-by: Philippe Lecluse <philippe.lecluse@intel.com>
Co-developed-by: Nirmoy Das <nirmoy.das@intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: José Roberto de Souza <jose.souza@intel.com>
Co-developed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Co-developed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Co-developed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
