Define PMU events for GT frequency (actual and requested). The
instantaneous values for these frequencies will be displayed.
Following PMU events are being added:
xe_0000_00_02.0/gt-actual-frequency/ [Kernel PMU event]
xe_0000_00_02.0/gt-requested-frequency/ [Kernel PMU event]
Standard perf commands can be used to monitor GT frequency:
$ perf stat -e xe_0000_00_02.0/gt-requested-frequency,gt=0/ -I1000
1.001229762 1483 Mhz xe_0000_00_02.0/gt-requested-frequency,gt=0/
2.006175406 1483 Mhz xe_0000_00_02.0/gt-requested-frequency,gt=0/
v2: Use locks while storing/reading samples, keep track of multiple
clients (Lucas) and other general cleanup.
v3: Review comments (Lucas) and use event counts instead of mask for
active events.
v4: Add freq events to event_param_valid method (Riana)
v5: Use instantaneous values instead of aggregating (Lucas)
v6: Obtain fwake at init for freq events as well and use non fwake
variant method for reading requested freq to avoid lockdep issues (Lucas)
v7: Review comments (Rodrigo, Lucas)
Cc: Riana Tauro <riana.tauro@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250331204827.2535393-1-vinay.belgaumkar@intel.com
Add PMU support for per-function engine activity stats.
per-function engine activity is enabled when VF's are enabled.
If 2 VF's are enabled, then the applicable function values are
0 - PF engine activity
1 - VF1 engine activity
2 - VF2 engine activity
This can be read from perf tool as shown below
./perf stat -e xe_<bdf>/engine-active-ticks,gt=0,engine_class=0,
engine_instance=0,function=1/ -I 1000
v2: fix documentation (Umesh)
remove global for functions (Lucas, Michal)
v3: fix commit message
move function_id checks to same place (Michal)
v4: fix comment (Umesh)
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311071759.2117211-3-riana.tauro@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
PMU provides two counters (engine-active-ticks, engine-total-ticks)
to calculate engine activity. When querying engine activity,
user must group these 2 counters using the perf_event
group mechanism to ensure both counters are sampled together.
To list the events
./perf list
xe_0000_03_00.0/engine-active-ticks/ [Kernel PMU event]
xe_0000_03_00.0/engine-total-ticks/ [Kernel PMU event]
The formats to be used with the above are
engine_instance - config:12-19
engine_class - config:20-27
gt - config:60-63
The events can then be read using perf tool
./perf stat -e xe_0000_03_00.0/engine-active-ticks,gt=0,
engine_class=0,engine_instance=0/,
xe_0000_03_00.0/engine-total-ticks,gt=0,
engine_class=0,engine_instance=0/ -I 1000
Engine activity can then be calculated as below
engine activity % = (engine active ticks/engine total ticks) * 100
v2: validate gt
rename total-ticks to engine-total-ticks
add helper to get hwe (Umesh)
v3: fix checkpatch warning
add details to documentation (Umesh)
remove ascii formats from documentation (Lucas)
v4: remove unnecessary warn within raw_spinlock (Lucas)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224053903.2253539-5-riana.tauro@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Provide a PMU interface for GT C6 residency counters. The interface is
similar to the one available for i915, but gt is passed in the config
when creating the event.
Sample usage and output:
$ perf list | grep gt-c6
xe_0000_00_02.0/gt-c6-residency/ [Kernel PMU event]
$ tail /sys/bus/event_source/devices/xe_0000_00_02.0/events/gt-c6-residency*
==> /sys/bus/event_source/devices/xe_0000_00_02.0/events/gt-c6-residency <==
event=0x01
==> /sys/bus/event_source/devices/xe_0000_00_02.0/events/gt-c6-residency.unit <==
ms
$ perf stat -e xe_0000_00_02.0/gt-c6-residency,gt=0/ -I1000
# time counts unit events
1.001196056 1,001 ms xe_0000_00_02.0/gt-c6-residency,gt=0/
2.005216219 1,003 ms xe_0000_00_02.0/gt-c6-residency,gt=0/
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124050411.2189060-6-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Most constants defined in xe_drm.h use DRM_XE_ as prefix which is
helpful to identify the name space. Make this systematic and add
this prefix where it was missing.
v2:
- fix vertical alignment of define values
- remove double DRM_ in some variables (José Roberto de Souza)
v3: Rebase
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There are a set of engine group busyness counters provided by HW which are
perfect fit to be exposed via PMU perf events.
BSPEC: 46559, 46560, 46722, 46729, 52071, 71028
events can be listed using:
perf list
xe_0000_03_00.0/any-engine-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/copy-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/interrupts/ [Kernel PMU event]
xe_0000_03_00.0/media-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/render-group-busy-gt0/ [Kernel PMU event]
and can be read using:
perf stat -e "xe_0000_8c_00.0/render-group-busy-gt0/" -I 1000
time counts unit events
1.001139062 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
2.003294678 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
3.005199582 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
4.007076497 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
5.008553068 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
6.010531563 43520 ns xe_0000_8c_00.0/render-group-busy-gt0/
7.012468029 44800 ns xe_0000_8c_00.0/render-group-busy-gt0/
8.013463515 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
9.015300183 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
10.017233010 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
10.971934120 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
The pmu base implementation is taken from i915.
v2:
Store last known value when device is awake return that while the GT is
suspended and then update the driver copy when read during awake.
v3:
1. drop init_samples, as storing counters before going to suspend should
be sufficient.
2. ported the "drm/i915/pmu: Make PMU sample array two-dimensional" and
dropped helpers to store and read samples.
3. use xe_device_mem_access_get_if_ongoing to check if device is active
before reading the OA registers.
4. dropped format attr as no longer needed
5. introduce xe_pmu_suspend to call engine_group_busyness_store
6. few other nits.
v4: minor nits.
v5: take forcewake when accessing the OAG registers
v6:
1. drop engine_busyness_sample_type
2. update UAPI documentation
v7:
1. update UAPI documentation
2. drop MEDIA_GT specific change for media busyness counter.
Co-developed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Co-developed-by: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
