[Why]
Memory allocation occurs within dml21_validate() for adding phantom planes.
May cause kernel to be tainted due to usage of FP Start.
[How]
Move FP start from dml21_validate to before mode programming/mode support.
Calculations requiring floating point are all done within mode programming
or mode support.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fe3250f108)
[WHY & HOW]
Remove the unnecessary DC_FP_START/DC_FP_END pair to reduce time in
preempt_disable. It also fixes "BUG: sleeping function called from
invalid context" error messages because of calling kzalloc with
GFP_KERNEL which can sleep.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 94da0735b6)
[Why]
"BUG: sleeping function called from invalid context" error.
after:
"drm/amd/display: Protect FPU in dml2_validate()/dml21_validate()"
The populate_dml_plane_cfg_from_plane_state() uses the GFP_KERNEL flag
for memory allocation, which shouldn't be used in atomic contexts.
The allocation is needed only for using another helper function
get_scaler_data_for_plane().
[How]
Modify helpers to pass a pointer to scaler_data within existing context,
eliminating the need for dynamic memory allocation/deallocation
and copying.
Fixes: 366e77cd49 ("drm/amd/display: Protect FPU in dml2_validate()/dml21_validate()")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bd3e84bc98)
Cc: stable@vger.kernel.org
smu_v13_0_display_clock_voltage_request() and
smu_v13_0_set_min_deep_sleep_dcefclk() were added in 2020 by
commit c05d1c4015 ("drm/amd/swsmu: add aldebaran smu13 ip support (v3)")
but have remained unused.
Remove them.
smu_v13_0_display_clock_voltage_request() was the only user
of smu_v13_0_set_hard_freq_limited_range(). Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The last use of smu_v11_0_get_dpm_level_range() was removed in 2020 by
commit 46a301e14e ("drm/amd/powerplay: drop unnecessary Navi1x specific
APIs")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu7_copy_bytes_from_smc() was added in 2016 by
commit 1ff55f4651 ("drm/amd/powerplay: implement smu7_smumgr for asics
with smu ip version 7.")
but never used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since secure firmware is more stable than bring up phase, I believe we
don't need such mdelays any more before wait PSP response on PSP v12.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Trigger Huang <Trigger.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If applications unmap the memory before destroying the userptr, it needs
trigger a segfault to notify user space to correct the free sequence in
VM debug mode.
v2: Send gpu access fault to user space
v3: Report gpu address to user space, remove unnecessary params
v4: update pr_err into one line, remove userptr log info
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In VM debug mode, it is desirable to notify the application
to correct the freeing sequence by unmapping the memory before
destroying the userptr in the old userptr path. Add a bitmask
to decide whether to send gpu vm fault to the applition.
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The driver doesn't want to implicitly sync on the DMA_RESV_USAGE_BOOKKEEP
usage fences, and the BOOKEEP fences should be synced explicitly. So, as
the VM implicit syncing only need to return and sync the dependent read
fences.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the s3/s0ix and s4 flags in the pm notifier so that we can skip
the resource evictions properly in pm prepare based on whether
we are suspending or hibernating. Drop the eviction as processes
are not frozen at this time, we we can end up getting stuck trying
to evict VRAM while applications continue to submit work which
causes the buffers to get pulled back into VRAM.
v2: Move suspend flags out of pm notifier (Mario)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4178
Fixes: 2965e6355d ("drm/amd: Add Suspend/Hibernate notification callback support")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This notification may arrive in VF mailbox while polling for response from
another event.
This patches covers the following scenarios:
- If VF is already in RMA state, then do not attempt to contact the host.
Host will ignore the VF after sending the notification.
- If the notification is detected during polling, then set the RMA status,
and return error to caller.
- If the notification arrives by interrupt, then set the RMA status and
queue a reset. This reset will fail and VF will stop runtime services.
Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Host may stop runtime services after reaching a bad page threshold.
This notification will indicate to the VF that it no longer has
access to the GPU.
Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN1_AON_SOC_ADDRESS_3_0 offset varies on different
VCN generations, the issue in vcn4.0.5 is caused by
a different VCN1_AON_SOC_ADDRESS_3_0 offset.
This patch does the following:
1. use the same offset for other VCN generations.
2. use the vcn4.0.5 special offset
3. update vcn_4_0 and vcn_5_0
Acked-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The dma_resv_add_fence() already refers to the added fence.
So when attaching the evciton fence to the gem bo, it needn't
refer to it anymore.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Host will send a notification when new bad pages are available.
Uopn guest request, the first 256 bad page addresses
will be placed into the PF2VF region.
Guest should pause the PF2VF worker thread while
the copy is in progress.
Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently VFs rely on poison consumption interrupt from HW
to kick off the bad page retirement process. Part of this process
includes a VF reset.
This patch adds the following:
1) Host Bad Pages notification message.
2) Guest request bad pages message.
When combined, VFs are able to reserve the pages early, and potentially
avoid future poison consumption that will disrupt user services
from consequent FLR.
Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add some random documentation associated with the ring buffer
manipulations and writeback.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace 0 and 1 with false and true for boolean variables in
dml2_core_dcn4_calcs.c and dml2_core_utils.c to align with the Linux
kernel coding style guidelines, which recommend using C99 bool type
with true/false values.
Signed-off-by: Ivan Shamliev <ivan.shamliev.dev@abv.bg>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The header file 'tegra_drm.h' is included in gem.c, but this file is
already include 'drm.h'. Although there is no harm in including this
file again, it is also not necessary. Furthermore, the header file is
located under 'include/uapi/drm' so ideally the full path would be
used to be explicit. For now, just remove from gem.c.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250428153435.1013101-1-jonathanh@nvidia.com
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct i915_wa *". The returned type, while
technically matching, will be const qualified. As there is no general
way to remove const qualifiers, adjust the allocation type to match
the assignment.
Signed-off-by: Kees Cook <kees@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20250426061357.work.749-kees@kernel.org
Observe that i915->irq_lock is no longer used to protect anything
outside of display. Make it a display thing.
This allows us to remove the ugly #define irq_lock irq.lock hack from xe
compat header.
Note that this is slightly more subtle than it first looks. For i915,
there's no functional change here. The lock is moved. However, for xe,
we'll now have *two* locks, xe->irq.lock and display->irq.lock. These
should protect different things, though. Indeed, nesting in the past
would've lead to a deadlock because they were the same lock.
With the i915 references gone, we can make a handful more files
independent of i915_drv.h.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/6d8d2ce0f34a9c7361a5e2fcf96bb32a34c57e76.1746536745.git.jani.nikula@intel.com
[Jani: Fixed a comment while applying.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
