Pull i2c updates from Wolfram Sang:
"Core updates:
- move towards using the 'fwnode' handle instead of 'of_node'
(meaning 'of_node' even gets removed from i2c_board_info)
- add support for Write Disable-aware SPD eeproms
- minor stuff (use new helpers, typo fixes)
i2c-atr (address translator) updates:
- support per-channel alias pools
- added support for dynamic address translation (also adds FPC202
driver as its user)
- add 'static' and 'passthrough' flags
Cleanups and refactorings
- Many drivers switched to dev_err_probe()
- Generic cleanups applied to designware, iproc, ismt, mlxbf,
npcm7xx, qcom-geni, pasemi, and thunderx
- davinci: declare I2C mangling support among I2C features
- designware: clean up DTS handling
- designware: fix PM runtime on driver unregister
- imx: improve error logging during probe
- lpc2k: improve checks in probe error path
- xgene-slimpro: improve PCC shared memory handling
- pasemi: improve error handling in reset, smbus clear, timeouts
- tegra: validate buffer length during transfers
- wmt: convert binding to YAML format
Improvements and extended support:
- microchip-core: add SMBus support
- mlxbf: add support for repeated start in block transfers
- mlxbf: improve timer configuration
- npcm: attempt clock toggle recovery before failing init
- octeon: add support for block mode operations
- pasemi: add support for unjam device feature
- riic: add support for bus recovery
New device support:
- MediaTek Dimensity 1200 (MT6893)
- Sophgo SG2044
- Renesas RZ/V2N (R9A09G056)
- Rockchip RK3528
- AMD ISP (new driver)"
* tag 'i2c-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (89 commits)
i2c: Use str_read_write() helper
i2c: mlxbf: avoid 64-bit division
i2c: viai2c-wmt: Replace dev_err() with dev_err_probe() in probe function
i2c: designware: Don't warn about missing get_clk_rate_khz
i2c: designware: Invoke runtime suspend on quick slave re-registration
i2c-mlxbf: Improve I2C bus timing configuration
i2c-mlxbf: Add repeated start condition support
i2c: xgene-slimpro: Replace dev_err() with dev_err_probe() in probe function
dt-bindings: i2c: i2c-wmt: Convert to YAML
i2c: microchip-corei2c: add smbus support
i2c: mlxbf: Allow build with COMPILE_TEST
i2c: I2C_DESIGNWARE_AMDISP should depend on DRM_AMD_ISP
i2c: atr: add passthrough flag
i2c: atr: add static flag
i2c: atr: allow replacing mappings in attach_addr()
i2c: atr: deduplicate logic in attach_addr()
i2c: atr: do not create mapping in detach_addr()
i2c: atr: split up i2c_atr_get_mapping_by_addr()
i2c: atr: find_mapping() -> get_mapping()
i2c: atr: Fix lockdep for nested ATRs
...
The addition of target mode causes a build failure when CONFIG_I2C_SLAVE
is turned off:
drivers/i2c/busses/i2c-imx-lpi2c.c:1273:10: error: 'const struct i2c_algorithm' has no member named 'reg_target'
1273 | .reg_target = lpi2c_imx_register_target,
| ^~~~~~~~~~
drivers/i2c/busses/i2c-imx-lpi2c.c:1274:10: error: 'const struct i2c_algorithm' has no member named 'unreg_target'
1274 | .unreg_target = lpi2c_imx_unregister_target,
| ^~~~~~~~~~~~
Select the Kconfig symbol like we do for other similar drivers.
Fixes: 1ee867e465 ("i2c: imx-lpi2c: add target mode support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Pull i2c updates from Wolfram Sang:
"Core:
- drivers can now use a GPIO as a side channel for SMBus Alerts using
a generic binding
- regular stuff like mem leak fix, Makefile maintenance...
Host improvements and refactoring:
- All controllers using the 'remove_new' callback have been reverted
to use the 'remove' callback
- Intel SCH controller underwent significant refactoring, this brings
love and a modern look to the driver
- PIIX4 driver refactored to enable usage by other drivers (e.g., AMD
ASF)
- iMX/MXC improved message handling to reduce protocol overhead:
Refactored DMA/non-DMA read/write and bus polling mechanisms to
achieve this.
- ACPI documentation for PIIX4
New host features:
- i2c-cadence support for atomic transfers
- Qualcomm CII support for a 32MHz serial engine clock
Deprecated features:
- Dropped outdated support for AMD756 S4882 and NFORCE2 S4985. If
somebody misses this, Jean will rewrite support using the proper
i2c mux framework.
New hardware IDs for existing drivers:
- Intel Panther Lake
- S32G2/S32G3 SoCs
- HJMC01 DesignWare ACPI HID
- PIC64GX to Microchip Core
- Qualcomm SDM670 to Qualcomm CCI
New drivers:
- AMD ASF
- Realtek RTL I2C Controller
at24 updates:
- add support for the lockable page on ST M24256E"
* tag 'i2c-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (59 commits)
docs: i2c: piix4: Add ACPI section
i2c: Add driver for the RTL9300 I2C controller
i2c: qcom-cci: Remove unused struct member cci_clk_rate
dt-bindings: i2c: Add Realtek RTL I2C Controller
i2c: busses: Use *-y instead of *-objs in Makefile
i2c: imx: add support for S32G2/S32G3 SoCs
dt-bindings: i2c: imx: add SoC specific compatible strings for S32G
i2c: qcom-cci: Remove the unused variable cci_clk_rate
i2c: Drop legacy muxing pseudo-drivers
i2c: imx: prevent rescheduling in non dma mode
i2c: imx: separate atomic, dma and non-dma use case
i2c: imx: do not poll for bus busy in single master mode
i2c: designware: Add a new ACPI HID for HJMC01 I2C controller
i2c: qcom-geni: Keep comment why interrupts start disabled
dt-bindings: i2c: microchip: corei2c: Add PIC64GX as compatible with driver
i2c: designware: constify abort_sources
i2c: Switch back to struct platform_driver::remove()
i2c: qcom-geni: Support systems with 32MHz serial engine clock
i2c: qcom-cci: Stop complaining about DT set clock rate
dt-bindings: i2c: qcom-cci: Document SDM670 compatible
...
Add support for the I2C controller on the RTL9300 SoC. There are two I2C
controllers in the RTL9300 that are part of the Ethernet switch register
block. Each of these controllers owns a SCL pin (GPIO8 for the fiorst
I2C controller, GPIO17 for the second). There are 8 possible SDA pins
(GPIO9-16) that can be assigned to either I2C controller. This
relationship is represented in the device tree with a child node for
each SDA line in use.
This is based on the openwrt implementation[1] but has been
significantly modified
[1] - https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/realtek/files-5.15/drivers/i2c/busses/i2c-rtl9300.c
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
While at it, fix an obvious typo in help section of the Kconfig.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Some S32G2/S32G3 SoC I2C particularities exist
such as different <clock divider, register value> pairs.
Those are addressed by adding specific S32G2 and S32G3
compatible strings.
Co-developed-by: Ionut Vicovan <Ionut.Vicovan@nxp.com>
Signed-off-by: Ionut Vicovan <Ionut.Vicovan@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The i2c-amd756-s4882 and i2c-nforce2-s4985 muxing pseudo-drivers were
written at a time when the i2c core did not support muxing. They are
essentially board-specific hacks. If we had to add support for these
boards today, we would implement it in a completely different way.
These Tyan server boards are 19 years old by now, so I very much doubt
any of these is still running today. So let's just drop this clumsy
code. If anyone really still needs this support and complains, I'll
rewrite it in a proper way on top of i2c-mux.
This also fixes the following warnings:
drivers/i2c/busses/i2c-amd756.c:286:20: warning: symbol 'amd756_smbus' was not declared. Should it be static?
drivers/i2c/busses/i2c-nforce2.c:123:20: warning: symbol 'nforce2_smbus' was not declared. Should it be static?
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Andi Shyti <andi.shyti@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Implement the i2c_algorithm operations to enable support for AMD ASF
(Alert Standard Format) with SMBus. This enhancement includes:
- Adding functionality to identify and select the supported ASF functions.
- Implementing mechanisms for registering and deregistering I2C slave
devices.
- Providing support for data transfer operations over ASF.
Additionally, include a 'select' Kconfig entry as the current patch
utilizes .reg_slave() and .unreg_slave() callbacks, which are controlled
by CONFIG_I2C_SLAVE.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The AMD ASF controller is presented to the operating system as an ACPI
device. The AMD ASF driver can use ACPI to obtain information about the
ASF controller's attributes, such as the ASF address space and interrupt
number, and to handle ASF interrupts.
Currently, the piix4 driver assumes that a specific port address is
designated for AUX operations. However, with the introduction of ASF, the
same port address may also be used by the ASF controller. Therefore, a
check needs to be added to ensure that if ASF is advertised and enabled in
ACPI, the AUX port should not be configured.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The KEBA I2C controller is only present on KEBA PLC devices. Hence add
a dependency on KEBA_CP500, to prevent asking the user about this driver
when configuring a kernel without KEBA CP500 system FPGA support.
Fixes: c7e08c816c ("i2c: keba: Add KEBA I2C controller support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Gerhard Engleder <eg@keba.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The KEBA I2C controller is found in the system FPGA of KEBA PLC devices.
It is used to connect EEPROMs and hardware monitoring chips. The
It is a simple I2C controller with a fixed bus speed of 100 kbit/s. The
whole message transmission is executed by the driver. The driver
triggers all steps over control, status and data register. There are no
FIFOs or interrupts.
Signed-off-by: Gerhard Engleder <eg@keba.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
There are quite a few drivers and options for the DesignWare
I2C adapter in the Kconfig. Grouping all of them under the
I2C_DESIGNWARE_CORE. That makes the menuconfig a bit more
easier to understand.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The piix4 I2C bus can carry SPDs, register them if present.
Only look on bus 0, as this is where the SPDs seem to be located.
Only the first 8 slots are supported. If the system has more,
then these will not be visible.
The AUX bus can not be probed as on some platforms it reports all
devices present and all reads return "0".
This would allow the ee1004 to be probed incorrectly.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Add Zhaoxin I2C controller driver. It provides the access to the i2c
busses, which connects to the touchpad, eeprom, I2S, etc.
Zhaoxin I2C controller has two separate busses, so may accommodate up
to two I2C adapters. Those adapters are listed in the ACPI namespace
with the IIC1D17 HID, and probed by a platform driver.
The driver works with IRQ mode, and supports basic I2C features. Flags
I2C_AQ_NO_ZERO_LEN and I2C_AQ_COMB_WRITE_THEN_READ are used to limit
the unsupported access.
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Hans Hu <hanshu-oc@zhaoxin.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to add HAS_IOPORT as dependency for those
drivers using them.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Currently, all Kconfig symbols for R-Car Gen4 SoCs select
ARCH_RCAR_GEN3, which might confuse the casual reader. Prepare for the
advent of ARCH_RCAR_GEN4 by extending the dependency for auto-selecting
reset controller support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Pull i2c updates from Wolfram Sang:
"I2C has largely driver updates for 6.7, i.e. feature additions (like
adding transfers while in atomic mode), using new helpers (like
devm_clk_get_enabled), new IDs, documentation fixes and additions...
you name it.
The core got a memleak fix and better support for nested muxes"
* tag 'i2c-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (53 commits)
i2c: s3c2410: make i2c_s3c_irq_nextbyte() void
i2c: qcom-geni: add ACPI device id for sc8180x
Documentation: i2c: add fault code for not supporting 10 bit addresses
i2c: sun6i-p2wi: Prevent potential division by zero
i2c: mux: demux-pinctrl: Convert to use sysfs_emit_at() API
i2c: i801: Use new helper acpi_use_parent_companion
ACPI: Add helper acpi_use_parent_companion
MAINTAINERS: add YAML file for i2c-demux-pinctrl
i2c: core: fix lockdep warning for sparsely nested adapter chain
i2c: axxia: eliminate kernel-doc warnings
dt-bindings: i2c: i2c-demux-pinctrl: Convert to json-schema
i2c: stm32f7: Use devm_clk_get_enabled()
i2c: stm32f4: Use devm_clk_get_enabled()
i2c: stm32f7: add description of atomic in struct stm32f7_i2c_dev
i2c: fix memleak in i2c_new_client_device()
i2c: exynos5: Calculate t_scl_l, t_scl_h according to i2c spec
i2c: i801: Simplify class-based client device instantiation
i2c: exynos5: add support for atomic transfers
i2c: at91-core: Use devm_clk_get_enabled()
eeprom: at24: add ST M24C64-D Additional Write lockable page support
...
The "i2c_mlxcpld" platform device is only instantiated on X86 systems
(through drivers/platform/x86/mlx-platform.c), or on ARM64 systems with
ACPI (through drivers/platform/mellanox/nvsw-sn2201.c). Hence further
restrict the dependency on ARM64 to ACPI, to prevent asking the user
about this driver when configuring an ARM64 kernel without ACPI support.
While at it, document in the Kconfig help text that the driver supports
ARM64/ACPI based systems, too.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Vadim Pasternak <vadimp@nvidia.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Pull i2c updates from Wolfram Sang:
"Mostly fixes for DTs or DT handling this time. And a few driver
bugfixes"
* tag 'i2c-for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (28 commits)
i2c: xiic: xiic_xfer(): Fix runtime PM leak on error path
i2c: cadence: cdns_i2c_master_xfer(): Fix runtime PM leak on error path
i2c: omap: Improve error reporting for problems during .remove()
i2c: cadence: Add reset controller support
dt-bindings: i2c: cadence: Document `resets` property
i2c: mediatek: add support for MT7981 SoC
dt-bindings: i2c: i2c-mt65xx: add MediaTek MT7981 SoC
dt-bindings: i2c: Drop unneeded quotes
i2c: brcmstb: use devm_platform_ioremap_resource_byname()
i2c: cadence: Detect maximum transfer size
i2c: cadence: Allow to specify the FIFO depth
dt-bindings: i2c: cadence: Document `fifo-depth` property
i2c: xiic: Use devm_platform_get_and_ioremap_resource()
i2c: mpc: Use i2c-scl-clk-low-timeout-us i2c property
i2c: mpc: Use of_property_read_u32 instead of of_get_property
dt-bindings: i2c: mpc: Mark "fsl,timeout" as deprecated
i2c: xiic: hide OF related data for COMPILE_TEST
i2c: synquacer: mark OF related data as maybe unused
dt-bindings: i2c: i2c-mt65xx: Add compatible for MT6795 Helio X10
i2c: imx: Simplify using devm_clk_get_enabled()
...
Currently the PSP semaphore communication base address is discovered
by using an MSR that is not architecturally guaranteed for future
platforms. Also the mailbox that is utilized for communication with
the PSP may have other consumers in the kernel, so it's better to
make all communication go through a single driver.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mark Hasemeyer <markhas@chromium.org>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Mark Hasemeyer <markhas@chromium.org>
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As part of converting RISC-V SOC_FOO symbols to ARCH_FOO to match the
use of such symbols on other architectures, convert the Microchip FPGA
i2c drivers to use the new symbol.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The ppc64le_allmodconfig sets I2C_PASEMI=y and leaves COMPILE_TEST to
default to y and I2C_APPLE to default to m, running into a known
incompatible configuration that breaks the build [1]. Specifically,
a common dependency (i2c-pasemi-core.o in this case) cannot be used by
both builtin and module consumers.
Disable I2C_APPLE when I2C_PASEMI is a builtin to prevent this.
[1]: https://lore.kernel.org/all/202112061809.XT99aPrf-lkp@intel.com
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Pull i2c updates from Wolfram Sang:
- new drivers for HPE GXP and Loongson 2K/LS7A
- bigger refactorings for i801 and xiic
- gpio driver gained ACPI and SDA-write only support
- the core converted some OF helpers to fwnode helpers
- usual bunch of driver updates
* tag 'i2c-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits)
MAINTAINERS: Add HPE GXP I2C Support
i2c: Add GXP SoC I2C Controller
dt-bindings: i2c: Add hpe,gxp-i2c
i2c: xiic: Remove some dead code
i2c: xiic: Add SCL frequency configuration support
i2c: xiic: Update compatible with new IP version
dt-bindings: i2c: xiic: Add 'xlnx,axi-iic-2.1' to compatible
i2c: i801: Call i801_check_post() from i801_access()
i2c: i801: Call i801_check_pre() from i801_access()
i2c: i801: Centralize configuring block commands in i801_block_transaction
i2c: i801: Centralize configuring non-block commands in i801_simple_transaction
i2c: i801: Handle SMBAUXCTL_E32B in i801_block_transaction_by_block only
i2c: i801: Add i801_simple_transaction(), complementing i801_block_transaction()
Documentation: i2c: correct spelling
dt-bindings: i2c: i2c-st: convert to DT schema
i2c: i801: add helper i801_set_hstadd()
i2c: i801: make FEATURE_BLOCK_PROC dependent on FEATURE_BLOCK_BUFFER
i2c: i801: make FEATURE_HOST_NOTIFY dependent on FEATURE_IRQ
i2c: i801: improve interrupt handler
i2c: st: use pm_sleep_ptr to avoid ifdef CONFIG_PM_SLEEP
...
The GXP SoC supports 10 I2C engines. Each I2C engine is completely
independent and can function both as an I2C master and I2C slave. The
I2C master can operate in a multi master environment. The engines support
a scalable speed from 8kHZ to 1.5 Mhz.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This I2C module is integrated into the Loongson-2K SoCs and Loongson
LS7A bridge chip.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
All board support that was marked as 'unused' earlier can
now be removed, leaving the five machines that that still
had someone using them in 2022, or that are supported in
qemu.
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
