Jonathan writes:
IIO: New device support, features and cleanup for 6.16 - take 2
Note - last minute rebase was to drop a typo patch that I'd accidentally
picked up (in the microblaze arch Kconfig)
Take 2 is due to that rebase messing up some fixes tags that were
referring to patches after that point.
There is a known merge conflict due to changes in neighbouring lines.
Stephen's resolution in linux-next is:
https://lore.kernel.org/linux-next/20250506155728.65605bae@canb.auug.org.au/
Added 3 named IIO reviewers to MAINTAINERS. This is a reflection of those
who have been doing much of this work for some time. Lars-Peter is
removed from the entry having moved on to other topics. Thanks
Nuno, David and Andy for stepping up and Lars-Peter for all your
hard work in the past!
Includes the usual mix of new device support, features and general
cleanup.
This time we also have some tree wide changes.
- Rip out the iio_device_claim_direct_scoped() as it proved hard to work
with. This series includes quite a few related cleanups such as use
of guard or factoring code out to allow direct returns.
- Switch from iio_device_claim/release_direct_mode() to new
iio_device_claim/release_direct() which is structured so that sparse
can warn on failed releases. There were a few false positives but
those were mostly in code that benefited from being cleaned up as part
of this process.
- Introduce iio_push_to_buffers_with_ts() to replace the _timestamp()
version over time. This version takes the size of the supplied buffer
which the core checks is at least as big as expected by calculation
from channel descriptions of those channels enabled. Use this in
an initial set of drivers.
- Add macros for IIO_DECLARE_BUFFER_WITH_TS() and
IIO_DECLARE_DMA_BUFFER_WITH_TS() to avoid lots of fiddly code to ensure
correctly aligned buffers for timestamps being added onto the end of
channel data.
New device support
------------------
adi,ad3530r
- New driver for AD3530, AD3530R, AD3531 and AD3531R DACs with
programmable gain controls. R variants have internal references.
adi,ad7476
- Add support (dt compatible only) for the Rohm BU79100G ADC which is
fully compatible with the ti,ads7866.
adi,ad7606
- Support ad7606c-16 and ad7606c-18 devices. Includes switch to dynamic
channel information allocation.
adi,ad7380
- Add support for the AD7389-4
dfrobot,sen0322
- New driver for this oxygen sensor.
mediatek,mt2701-auxadc
- Add binding for MT6893 which is fully compatible with already supported
MT8173.
meson-saradc
- Support the GXLX SoCs. Mostly this is a workaround for some unrelated
clock control bits found in the ADC register map.
nuvoton,nct7201
- New driver for NCT7201 and NCT7202 I2C ADCs.
rohm,bd79124
- New driver for this 12-bit, 8-channel SAR ADC.
- Switch to new set_rv etc gpio callbacks that were added in 6.15.
rohm,bd79703
- Add support for BD79700, BD79701 and BD79702 DACs that have subsets of
functionality of the already supported bd79703. Included making this
driver suitable for support device variants.
st,stm32-lptimer
- Add support for stm32pm25 to this trigger.
Features
--------
Beyond IIO
- Property iterator for named children.
core
- Enable writes for 64 bit integers used for standard IIO ABI elements.
Previously these could be read only.
- Helper library that should avoid code duplication for simpler ADC
bindings that have a child node per channel.
- Enforce that IIO_DMA_MINALIGN is always at least 8 (almost always true
and simplifies code on all significant architectures)
core/backend
- Add support to control source of data - useful when the HDL includes
things like generated ramps for testing purposes. Enable this for
adi-axi-dac
adi,ad3552-hs
- Add debugfs related callbacks to allow debug access to register contents.
adi,ad4000
- Support SPI offload with appropriate FPGA firmware along with improving
documentation.
adi,ad7293
- Add support for external reference voltage.
adi,ad7606
- Support SPI offload.
adi,ad7768-1
- Support reset GPIO.
adi,admv8818
- Support filter frequencies beyond 2^32.
adi,adxl345
- Add single and double tap events.
hid-sensor-prox
- Support 16-bit report sizes as seen on some Intel platforms.
invensense,icm42600
- Enable use of named interrupts to avoid problems with some wiring choices.
Get the interrupt by name, but fallback to previous assumption on the first
being INT1 if no names are supplied.
microchip,mcp3911
- Add reset gpio support.
rohm,bh7150
- Add reset gpio support.
st,stm32
- Add support to control oversampling.
ti,adc128s052
- Add support for ROHM BD79104 which is early compatible with the TI
parts already supported by this driver. Includes some general driver
cleanup and a separate dt binding.
- Simplify reference voltage handling by assuming it is fixed after enabling
the supply.
winsen,mhz19b
- New driver for this C02 sensor.
Cleanup and minor fixes
-----------------------
dt-bindings
- Correct indentation and style for DTS examples.
- Use unevalutateProperties for SPI devices instead of additionalProperties
to allow generic SPI properties from spi-peripheral-props.yaml
ABI Docs
- Add missing docs for sampling_frequency when it applies only to events.
Treewide
- Various minor tweaks, comment fixes and similar.
- Sort TI ADCs in Kconfig that had gotten out of order.
- Switch various drives that provide GPIO chip functionality to the new
callbacks with return values.
- Standardize on { } formatting for all array sentinels.
- Make use of aligned_s64 in a few places to replace either wrong types
or manually defined equivalents.
- Drop places where spi bits_per_word is set to 8 because that is the
default anyway.
adi,ad_sigma_delta library
- Avoid a potential use of uninitialized data if reg_size has a value
that is not supported (no drivers hit this but it is reasonable hardening)
adi,ad4030
- Add error checking for scan types and no longer store it in state.
- Rework code to reduce duplication.
- Move setting the mode from buffer preenable() to update_scan_mode(),
better matching expected semantics of the two different callbacks.
- Improve data marshalling comments.
adi,ad4695
- Use u16 for buffer elements as oversampling is not yet supported except
with SPI offload (which doesn't use this path).
adi,ad5592r
- Clean up destruction of mutexes.
- Use lock guards to simplify code (later patch fixes a missed unlock)
adi,ad5933
- Correct some incorrect settling times.
adi,ad7091
- Deduplicate handling of writable vs volatile registers as they are the
inverse of each other for this device.
adi,ad7124
- Fix 3db Filter frequency.
- Remove ability to directly write the filter frequency (which was broken)
- Register naming improvements.
adi,ad7606
- Add a missing return value check.
- Fill in max sampling rates for all chips.
- Use devm_mutex_init()
- Fix up some kernel-doc formatting issues.
- Remove some camel case that snuck in.
- Drop setting address field in channels as easily established from other
fields.
- Drop unnecessary parameter to ad76060_scale_setup_cb_t.
adi,ad7768-1
- Convert to regmap.
- Factor out buffer allocation.
- Tidy up headers.
adi,ad7944
- Stop setting bits_per_word in SPI xfers with no data.
adi,ad9832
- Add of_device_id table rather than just relying on fallbacks.
- Use FIELD_PREP() to set values of fields.
adi,admv1013
- Cleanup a pointless ternary.
adi,admv8818
- Fix up LPF Band 5 frequency which was slightly wrong.
- Fix an integer overflow.
- Fix range calculation
adi,adt7316
- Replace irqd_get_trigger_type(irq_get_irq_data()) with simpler
irq_get_trigger_type()
adi,adxl345
- Use regmap cache instead of various state variables that were there to
reduce bus accesses.
- Make regmap return value checking consistent across all call sites.
adi,axi-dac
- Add a check on number of channels (0 to 15 valid)
allwinner,sun20i
- Use new adc-helpers to replace local parsing code for channel nodes.
bosch,bmp290
- Move to local variables for sensor data marshalling removing the need
for a messy definition that has to work for all supported parts.
Follow up fix adds a missing initialization.
dynaimage,al3010 and dynaimage,al3320a
- Various minor cleanup to bring these drivers inline with reviewed feedback
given on a new driver.
- Fix an error path in which power down is not called when it should be.
- Switch to regmap.
google,cros_ec
- Fix up a flexible array in middle of structure warning.
- Flush fifo when changing the timeout to avoid potential long wait
for samples.
hid-sensor-rotation
- Remove an __aligned(16) marking that doesn't seem to be justified.
kionix,kxcjk-1013
- Deduplicate code for setting up interrupts.
microchip,mcp3911
- Fix handling of conversion results register which differs across supported
devices.
idt,zopt2201
- Avoid duplicating register lists as all volatile registers are the
inverse of writeable registers on this device.
renesas,rzg2l
- Use new adc-helpers to replace local parsing code for channel nodes.
ti,ads1298
- Fix a missing Kconfig dependency.
* tag 'iio-for-6.16a-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (260 commits)
dt-bindings: iio: adc: Add ROHM BD79100G
iio: adc: add support for Nuvoton NCT7201
dt-bindings: iio: adc: add NCT7201 ADCs
iio: chemical: Add driver for SEN0322
dt-bindings: trivial-devices: Document SEN0322
iio: adc: ad7768-1: reorganize driver headers
iio: bmp280: zero-init buffer
iio: ssp_sensors: optimalize -> optimize
HID: sensor-hub: Fix typo and improve documentation
iio: admv1013: replace redundant ternary operator with just len
iio: chemical: mhz19b: Fix error code in probe()
iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS
iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS
iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS
iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros
iio: make IIO_DMA_MINALIGN minimum of 8 bytes
iio: pressure: zpa2326_spi: remove bits_per_word = 8
iio: pressure: ms5611_spi: remove bits_per_word = 8
...
Add Nuvoton NCT7201/NCT7202 system voltage monitor 12-bit ADC driver
NCT7201/NCT7202 supports up to 12 analog voltage monitor inputs and up
to 4 SMBus addresses by ADDR pin. Meanwhile, ALERT# hardware event pins
for independent alarm signals, and all the threshold values could be set
for system protection without any timing delay. It also supports reset
input RSTIN# to recover system from a fault condition.
Currently, only single-edge mode conversion and threshold events are
supported.
Signed-off-by: Eason Yang <j2anfernee@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250512083156.3300006-3-j2anfernee@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ROHM BD79104 ADC has identical SPI communication logic as the
ti-adc128s052. Eg, SPI transfer should be 16 clk cycles, conversion is
started when the CS is pulled low, and channel selection is done by
writing the channel ID after two zero bits. Data is contained in
big-endian format in the last 12 bits.
The BD79104 has two input voltage pins. Data sheet uses terms "vdd" and
"iovdd". The "vdd" is used also as an analog reference voltage. Hence
the driver expects finding these from the device-tree, instead of having
the "vref" only as TI's driver.
NOTE: The TI's data sheet[1] does show that the TI's IC does actually
have two voltage inputs as well. Pins are called Va (analog reference)
and Vd (digital supply pin) - but I keep the existing driver behaviour
for the TI's IC "as is", because I have no HW to test changes, and
because I have no real need to touch it.
NOTE II: The BD79104 requires SPI MODE 3.
NOTE III: I used evaluation board "BD79104FV-EVK-001" made by ROHM. With
this board I had to drop the SPI speed below the 20M which is mentioned
in the data-sheet [2]. This, however, may be a limitation of the EVK
board, not the component itself.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Datasheet: https://www.ti.com/lit/ds/symlink/adc128s052.pdf # [1]
Datasheet: https://fscdn.rohm.com/en/products/databook/datasheet/ic/data_converter/dac/bd79104fv-la-e.pdf # [2]
Link: https://patch.msgid.link/36ffa72cbdf8dbbdf1e612040db82ebcdf73fa24.1744022065.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
FPGA HDL projects can include a PWM generator in addition to SPI-Engine.
The PWM IP is used to trigger SPI-Engine offload modules that in turn set
SPI-Engine to execute transfers to poll data from the ADC. That allows data
to be read at the maximum sample rates. Also, it is possible to set a
specific sample rate by setting the proper PWM duty cycle and related state
parameters, thus allowing an adjustable ADC sample rate when a PWM (offload
trigger) is used in combination with SPI-Engine.
Add support for SPI offload.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/386ce043a0e3fc9e8ff71f17aef8de128ce5869e.1743110188.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ROHM BD79124 is a 12-bit, 8-channel, SAR ADC. The ADC supports
an automatic measurement mode, with an alarm interrupt for out-of-window
measurements. The window is configurable for each channel.
The I2C protocol for manual start of the measurement and data reading is
somewhat peculiar. It requires the master to do clock stretching after
sending the I2C slave-address until the slave has captured the data.
Needless to say this is not well suopported by the I2C controllers.
Thus do not support the BD79124's manual measurement mode but implement
the measurements using automatic measurement mode, relying on the
BD79124's ability of storing latest measurements into register.
Support also configuring the threshold events for detecting the
out-of-window events.
The BD79124 keeps asserting IRQ for as long as the measured voltage is
out of the configured window. Thus, prevent the user-space from choking
on the events and mask the received event for a fixed duration (1 second)
when an event is handled.
The ADC input pins can be also configured as general purpose outputs.
Make those pins which don't have corresponding ADC channel node in the
device-tree controllable as GPO.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/ca3886c9abcb268ca976e62cd7da28bf5d6e6382.1742560649.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The new devm_iio_adc_device_alloc_chaninfo_se() -helper is intended to
help drivers avoid open-coding the for_each_node -loop for getting the
channel IDs. The helper provides standard way to detect the ADC channel
nodes (by the node name), and a standard way to convert the "reg"
-properties to channel identification numbers, used in the struct
iio_chan_spec. Furthermore, the helper can optionally check the found
channel IDs are smaller than given maximum. This is useful for callers
which later use the IDs for example for indexing a channel data array.
The original driver treated all found child nodes as channel nodes. The
new helper requires channel nodes to be named channel[@N]. This should
help avoid problems with devices which may contain also other but ADC
child nodes. Quick grep from arch/* with the sun20i-gpadc's compatible
string didn't reveal any in-tree .dts with channel nodes named
otherwise. Also, same grep shows all the in-tree .dts seem to have
channel IDs between 0..num of channels.
Use the new helper.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/e367a803c0d625e60c9fca16c55a25eee06b5a89.1742560649.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The new devm_iio_adc_device_alloc_chaninfo_se() -helper is intended to
help drivers avoid open-coding the for_each_node -loop for getting the
channel IDs. The helper provides standard way to detect the ADC channel
nodes (by the node name), and a standard way to convert the "reg"
-properties to channel identification numbers, used in the struct
iio_chan_spec. Furthermore, the helper can optionally check the found
channel IDs are smaller than given maximum. This is useful for callers
which later use the IDs for example for indexing a channel data array.
The original driver treated all found child nodes as channel nodes. The
new helper requires channel nodes to be named channel[@N]. This should
help avoid problems with devices which may contain also other but ADC
child nodes. Quick grep from arch/* with the rzg2l_adc's compatible
string didn't reveal any in-tree .dts with channel nodes named
otherwise. Also, same grep shows all the .dts seem to have channel IDs
between 0..num of channels.
Use the new helper.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/e84ccff01070eaee3dd1ae2d7e109f963168f586.1742560649.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add driver for ADS7128 and ADS7138 12-bit, 8-channel analog-to-digital
converters. These ADCs have a wide operating range and a wide feature
set. Communication is based on the I2C interface.
ADS7128 differs in the addition of further hardware features, like a
root-mean-square (RMS) and a zero-crossing-detect (ZCD) module.
Signed-off-by: Tobias Sperling <tobias.sperling@softing.com>
Link: https://patch.msgid.link/20250213-adc_ml-v4-2-66b68f8fdb8c@softing.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for AD7770, AD7771, AD7779 ADCs. The device is capable of
sending out data both on DOUT lines interface,as on the SDO line.
The driver currently implements only the SDO data streaming mode. SPI
communication is used alternatively for accessing registers and streaming
data. Register accesses are protected by crc8.
Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@analog.com>
Link: https://patch.msgid.link/20241014143204.30195-4-ramona.nechita@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a driver for the AD762x and AD796x family of ADCs. These are
pin-compatible devices using an LVDS interface for data transfer,
capable of sampling at rates of 6 (AD7625), 10 (AD7626), and 5
(AD7960/AD7961) MSPS, respectively. They also feature multiple voltage
reference options based on the configuration of the EN1/EN0 pins, which
can be set in the devicetree.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
Link: https://patch.msgid.link/20240909-ad7625_r1-v5-2-60a397768b25@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add scaling support to STM32 DFSDM.
When used in an analog context, a DFSDM filter typically converts the data
from a sigma delta modulator. The IIO device associated to the DFSDM
filter provides these data as raw data.
The IIO device can provide scaling information (voltage and offset) to
allow conversion of raw data into physical values.
With the new binding based on IIO backend framework, the sigma delta
modulators are defined as backends providing scaling information.
The scaling is not supported with legacy binding.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Acked-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240730084640.1307938-10-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The legacy sd modulator driver registers the sigma delta modulator as
an IIO channel provider. This implementation is not convenient when the
SD modulator has to be cascaded with another IIO device. The scaling
information is distributed across devices, which makes it difficult to
report consistent scaling data on IIO devices.
The solution is to expose these cascaded IIO devices as an aggregate
device, which report global scaling information.
Add IIO backend support to SD modulator to allow scaling information
management.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20240730084640.1307938-9-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for Microchip PAC1921 Power/Current monitor.
Implemented features:
* capture of bus voltage, sense voltage, current and power measurements
in free-run integration mode
* support for both raw and triggered buffer reading
* support for overflow events
* scale attributes to control voltage and current gains
* oversampling ratio attribute to control the number of integration
samples
* sampling rate attribute that reflects the integration period
* userspace attribute and DT parameter to control shunt resistor
* simple power management support
Limitations:
* operation mode fixed to free-run integration
* READ/INT pin and OUT pin not supported
* no controls for measurement resolutions and filters
Signed-off-by: Matteo Martelli <matteomartelli3@gmail.com>
Link: https://patch.msgid.link/20240724-iio-pac1921-v4-3-723698e903a3@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This is a new driver for Analog Devices Inc. AD4695 and similar ADCs.
The initial driver supports initializing the chip including configuring
all possible LDO and reference voltage sources as well as any possible
voltage input channel wiring configuration.
Only the 4-wire SPI wiring mode where the CNV pin is tied to the CS pin
is supported at this time. And reading sample data from the ADC can only
be done in direct mode for now.
Co-developed-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240711-iio-adc-ad4695-v4-2-c31621113b57@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a driver to support reading the Auxiliary ADC IP found in the
MediaTek MT6357, MT6358 and MT6359 Power Management ICs, featuring
a different register layout, configuration reset and ADC reading
sequence from the other already supported MediaTek SoC or PMIC
(aux)ADC HW.
This driver provides multiple ADC channels for system monitoring,
such as battery voltage, PMIC temperature, PMIC-internal voltage
regulators temperature, and others.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20240604123008.327424-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ADS1119 is a precision, 16-bit, analog-to-digital converter (ADC)
that features two differential or four single-ended inputs through a
flexible input multiplexer (MUX), rail-to-rail input
buffers, a programmable gain stage, a voltage reference, and an
oscillator.
Apart from normal single conversion, the driver also supports
continuous conversion mode using a triggered buffer. However, in this
mode only one channel can be scanned at a time.
Datasheet: https://www.ti.com/lit/gpn/ads1119
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20240617183905.4685-1-francesco@dolcini.it
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This adds a new driver for the AD7380 family ADCs.
The driver currently implements basic support for the AD7380, AD7381,
2-channel differential ADCs. Support for additional single-ended,
pseudo-differential and 4-channel chips that use the same register map
as well as additional features of the chip will be added in future patches.
[Julien Stephan: fix rx/tx buffer for regmap access]
[Julien Stephan: fix scale issue]
[Julien Stephan: use the new iio_device_claim_direct_scoped
instead of iio_device_claim_direct_mode]
Co-developed-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
[Julien Stephan: add datasheet links of supported parts]
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://lore.kernel.org/r/20240528-adding-new-ad738x-driver-v7-2-4cd70a4c12c8@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Unlike the other AD719Xs, AD7194 has configurable channels. The user can
dynamically configure them in the devicetree.
Add sigma_delta_info member to chip_info structure. Since AD7194 is the
only chip that has no channel sequencer, num_slots should remain
undefined.
Also modify config AD7192 description for better scaling.
Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
Link: https://lore.kernel.org/r/20240514120222.56488-7-alisa.roman@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD7173 family offer a complete integrated Sigma-Delta ADC solution
which can be used in high precision, low noise single channel
applications or higher speed multiplexed applications. The Sigma-Delta
ADC is intended primarily for measurement of signals close to DC but also
delivers outstanding performance with input bandwidths out to ~10kHz.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Michael Walle <michael@walle.cc> # for gpio-regmap
Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240228110622.25114-3-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
