Add test_rss_default_context_rule() to verify that ntuple rules can
correctly direct traffic to the default RSS context (context 0).
The test creates two ntuple rules with explicit location priorities:
- A high-priority rule (loc 0) directing specific port traffic to
context 0.
- A low-priority rule (loc 1) directing all other TCP traffic to context
1.
This validates that:
1. Rules targeting the default context function properly.
2. Traffic steering works as expected when mixing default and
additional RSS contexts.
The test was written by AI, and reviewed by humans.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250612071958.1696361-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 846742f7e3 ("selftests: drv-net: add a warning for
bkg + shell + terminate") added a warning for bkg() used
with terminate=True. The tso test was missed as we didn't
have it running anywhere in NIPA. Add exit_wait=True, to avoid:
# Warning: combining shell and terminate is risky!
# SIGTERM may not reach the child on zsh/ksh!
getting printed twice for every variant.
Fixes: 0d0f4174f6 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604012055.891431-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add missing config options for the tso.py test, specifically
to make sure the kernel is built with vxlan and gre tunnels.
I noticed this while adding a TSO-capable device QEMU to the CI.
Previously we only run virtio tests and it doesn't report LSO
stats on the QEMU we have.
Fixes: 0d0f4174f6 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604001653.853008-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current test just sends "hello\nworld" and verifies that is the
string received on the RX side. That is fine, but improve the test a bit
by sending 1K data. The test should be improved further to send more
data, but for now this should be a welcome improvement.
The test will send a repeating pattern of 0x01, 0x02, ... 0x06. The
ncdevmem `-v 7` flag will verify this pattern. ncdevmem will provide
useful debugging info when the test fails, such as the frags received
and verified fine, and which frag exactly failed, what was the expected
byte pattern, and what is the actual byte pattern received. All this
debug information will be useful when the test fails.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-8-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netdev_bind_rx takes ownership of the queue array passed as parameter
and frees it, so a queue array buffer cannot be reused across multiple
netdev_bind_rx calls.
This commit fixes that by always passing in a newly created queue array
to all netdev_bind_rx calls in ncdevmem.
Fixes: 85585b4bc8 ("selftests: add ncdevmem, netcat for devmem TCP")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250508084434.1933069-1-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Revert fbbf93556f ("selftests: nic_performance: Add selftest for performance of NIC driver")
Revert c087dc5439 ("selftests: nic_link_layer: Add selftest case for speed and duplex states")
Revert 6116075e18 ("selftests: nic_link_layer: Add link layer selftest for NIC driver")
These tests don't clean up after themselves, don't use the disruptive
annotations, don't get included in make install etc. etc. The tests
were added before we have any "HW" runner, so the issues were missed.
Our CI doesn't have any way of excluding broken tests, remove these
for now to stop the random pollution of results due to broken env.
We can always add them back once / if fixed.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250507140109.929801-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clean up two build warnings:
[1]
iou-zcrx.c: In function ‘process_recvzc’:
iou-zcrx.c:263:37: warning: too many arguments for format [-Wformat-extra-args]
263 | error(1, 0, "payload mismatch at ", i);
| ^~~~~~~~~~~~~~~~~~~~~~
[2] Use "%zd" for ssize_t type as better
iou-zcrx.c: In function ‘run_client’:
iou-zcrx.c:357:47: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘ssize_t’ {aka ‘long int’} [-Wformat=]
357 | error(1, 0, "send(): %d", sent);
| ~^ ~~~~
| | |
| int ssize_t {aka long int}
| %ld
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250502175136.1122-1-haiyuewa@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ensure the following prerequisites before executing the test:
1. 'socat' is installed on the remote host.
2. Python version supports socket.SO_INCOMING_CPU (available since v3.11).
Skip the test if either prerequisite is not met.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250430054801.750646-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RSS contexts are used to shard work across multiple queues for an
application using io_uring zero copy receive. Add a test case checking
that steering flows into an RSS context works.
Until I add multi-thread support to the selftest binary, this test case
only has 1 queue in the RSS context.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250425022049.3474590-4-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For bnxt when the agg ring is used then tcp-data-split is automatically
reported to be enabled, but __net_mp_open_rxq() requires tcp-data-split
to be explicitly enabled by the user.
Enable tcp-data-split explicitly in io_uring zc rx selftest.
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250409163153.2747918-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Rather tiny pull request, mostly so that we can get into our trees
your fix to the x86 Makefile.
Current release - regressions:
- Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc", error
queue accounting was missed
Current release - new code bugs:
- 5 fixes for the netdevice instance locking work
Previous releases - regressions:
- usbnet: restore usb%d name exception for local mac addresses
Previous releases - always broken:
- rtnetlink: allocate vfinfo size for VF GUIDs when supported, avoid
spurious GET_LINK failures
- eth: mana: Switch to page pool for jumbo frames
- phy: broadcom: Correct BCM5221 PHY model detection
Misc:
- selftests: drv-net: replace helpers for referring to other files"
* tag 'net-6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (22 commits)
Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc"
bnxt_en: bring back rtnl lock in bnxt_shutdown
eth: gve: add missing netdev locks on reset and shutdown paths
selftests: mptcp: ignore mptcp_diag binary
selftests: mptcp: close fd_in before returning in main_loop
selftests: mptcp: fix incorrect fd checks in main_loop
mptcp: fix NULL pointer in can_accept_new_subflow
octeontx2-af: Free NIX_AF_INT_VEC_GEN irq
octeontx2-af: Fix mbox INTR handler when num VFs > 64
net: fix use-after-free in the netdev_nl_sock_priv_destroy()
selftests: net: use Path helpers in ping
selftests: net: use the dummy bpf from net/lib
selftests: drv-net: replace the rpath helper with Path objects
net: lapbether: use netdev_lockdep_set_classes() helper
net: phy: broadcom: Correct BCM5221 PHY model detection
net: usb: usbnet: restore usb%d name exception for local mac addresses
net/mlx5e: SHAMPO, Make reserved size independent of page size
net: mana: Switch to page pool for jumbo frames
MAINTAINERS: Add dedicated entries for phy_link_topology
net: move replay logic to tc_modify_qdisc
...
Pull io_uring zero-copy receive support from Jens Axboe:
"This adds support for zero-copy receive with io_uring, enabling fast
bulk receive of data directly into application memory, rather than
needing to copy the data out of kernel memory.
While this version only supports host memory as that was the initial
target, other memory types are planned as well, with notably GPU
memory coming next.
This work depends on some networking components which were queued up
on the networking side, but have now landed in your tree.
This is the work of Pavel Begunkov and David Wei. From the v14 posting:
'We configure a page pool that a driver uses to fill a hw rx queue
to hand out user pages instead of kernel pages. Any data that ends
up hitting this hw rx queue will thus be dma'd into userspace
memory directly, without needing to be bounced through kernel
memory. 'Reading' data out of a socket instead becomes a
_notification_ mechanism, where the kernel tells userspace where
the data is. The overall approach is similar to the devmem TCP
proposal
This relies on hw header/data split, flow steering and RSS to
ensure packet headers remain in kernel memory and only desired
flows hit a hw rx queue configured for zero copy. Configuring this
is outside of the scope of this patchset.
We share netdev core infra with devmem TCP. The main difference is
that io_uring is used for the uAPI and the lifetime of all objects
are bound to an io_uring instance. Data is 'read' using a new
io_uring request type. When done, data is returned via a new shared
refill queue. A zero copy page pool refills a hw rx queue from this
refill queue directly. Of course, the lifetime of these data
buffers are managed by io_uring rather than the networking stack,
with different refcounting rules.
This patchset is the first step adding basic zero copy support. We
will extend this iteratively with new features e.g. dynamically
allocated zero copy areas, THP support, dmabuf support, improved
copy fallback, general optimisations and more'
In a local setup, I was able to saturate a 200G link with a single CPU
core, and at netdev conf 0x19 earlier this month, Jamal reported
188Gbit of bandwidth using a single core (no HT, including soft-irq).
Safe to say the efficiency is there, as bigger links would be needed
to find the per-core limit, and it's considerably more efficient and
faster than the existing devmem solution"
* tag 'for-6.15/io_uring-rx-zc-20250325' of git://git.kernel.dk/linux:
io_uring/zcrx: add selftest case for recvzc with read limit
io_uring/zcrx: add a read limit to recvzc requests
io_uring: add missing IORING_MAP_OFF_ZCRX_REGION in io_uring_mmap
io_uring: Rename KConfig to Kconfig
io_uring/zcrx: fix leaks on failed registration
io_uring/zcrx: recheck ifq on shutdown
io_uring/zcrx: add selftest
net: add documentation for io_uring zcrx
io_uring/zcrx: add copy fallback
io_uring/zcrx: throttle receive requests
io_uring/zcrx: set pp memory provider for an rx queue
io_uring/zcrx: add io_recvzc request
io_uring/zcrx: dma-map area for the device
io_uring/zcrx: implement zerocopy receive pp memory provider
io_uring/zcrx: grab a net device
io_uring/zcrx: add io_zcrx_area
io_uring/zcrx: add interface queue and refill queue
Add tests to check that the napi retained the IRQ after down/up,
multiple changes in the number of rx queues and after
attaching/releasing XDP program.
Tested on ice and idpf:
# NETIF=<iface> tools/testing/selftests/drivers/net/hw/irq.py
KTAP version 1
1..4
ok 1 irq.check_irqs_reported
ok 2 irq.check_reconfig_queues
ok 3 irq.check_reconfig_xdp
ok 4 irq.check_down
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Tested-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://patch.msgid.link/20250224232228.990783-7-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a simple test for TSO. Send a few MB of data and check device
stats to verify that the device was performing segmentation.
Do the same thing over a few tunnel types.
Injecting GSO packets directly would give us more ability to test
corner cases, but perhaps starting simple is good enough?
# ./ksft-net-drv/drivers/net/hw/tso.py
# Detected qstat for LSO wire-packets
KTAP version 1
1..14
ok 1 tso.ipv4 # SKIP Test requires IPv4 connectivity
ok 2 tso.vxlan4_ipv4 # SKIP Test requires IPv4 connectivity
ok 3 tso.vxlan6_ipv4 # SKIP Test requires IPv4 connectivity
ok 4 tso.vxlan_csum4_ipv4 # SKIP Test requires IPv4 connectivity
ok 5 tso.vxlan_csum6_ipv4 # SKIP Test requires IPv4 connectivity
ok 6 tso.gre4_ipv4 # SKIP Test requires IPv4 connectivity
ok 7 tso.gre6_ipv4 # SKIP Test requires IPv4 connectivity
ok 8 tso.ipv6
ok 9 tso.vxlan4_ipv6
ok 10 tso.vxlan6_ipv6
ok 11 tso.vxlan_csum4_ipv6
ok 12 tso.vxlan_csum6_ipv6
# Testing with mangleid enabled
ok 13 tso.gre4_ipv6
ok 14 tso.gre6_ipv6
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:7 error:0
Note that the test currently depends on the driver reporting
the LSO count via qstat, which appears to be relatively rare
(virtio, cisco/enic, sfc/efc; but virtio needs host support).
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250218225426.77726-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Looks like more and more tests want to iterate over IP version,
run the same test over ipv4 and ipv6. The current naming of
members in the env class makes it a bit awkward, we have
separate members for ipv4 and ipv6 parameters.
Store the parameters inside dicts, so that tests can easily
index them with ip version.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250218225426.77726-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest for io_uring zero copy Rx. This test cannot run locally
and requires a remote host to be configured in net.config. The remote
host must have hardware support for zero copy Rx as listed in the
documentation page. The test will restore the NIC config back to before
the test and is idempotent.
liburing is required to compile the test and be installed on the remote
host running the test.
Signed-off-by: David Wei <dw@davidwei.uk>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20250215000947.789731-12-dw@davidwei.uk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Refering to C binaries from Python code is going to be a common
need. Add a helper to convert from path in relation to the test.
Meaning, if the test is in the same directory as the binary, the
call would be simply: cfg.rpath("binary").
The helper name "rpath" is not great. I can't think of a better
name that would be accurate yet concise.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250207184140.1730466-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tool pp_alloc_fail.py tested error recovery by injecting errors
into the function page_pool_alloc_pages(). The page pool allocation
function page_pool_dev_alloc() does not end up calling
page_pool_alloc_pages(). page_pool_alloc_netmems() seems to be the
function that is called by all of the page pool alloc functions in
the API, so move error injection to that function instead.
Signed-off-by: John Daley <johndale@cisco.com>
Link: https://patch.msgid.link/20250115181312.3544-2-johndale@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add selftest case to check the send and receive throughput.
Supported link modes between local NIC driver and partner
are varied. Then send and receive throughput is captured
and verified. Test uses iperf3 tool.
Add iperf3 server/client function in GenerateTraffic class.
Signed-off-by: Mohan Prasad J <mohan.prasad@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add selftest case for testing the speed and duplex state of
local NIC driver and the partner based on the supported
link modes obtained from the ethtool. Speed and duplex states
are varied and verified using ethtool.
Signed-off-by: Mohan Prasad J <mohan.prasad@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
