Split helper functions from the netconsole basic test into a separate
library file to enable reuse across different netconsole tests. This
change only moves the existing helper functions to lib/sh/lib_netcons.sh
while preserving the same test functionality.
The helpers provide common functions for:
- Setting up network namespaces and interfaces
- Managing netconsole dynamic targets
- Setting user data
- Handling test dependencies
- Cleanup operations
Do not make any change in the code, other than the mechanical
separation.
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250108-netcons_overflow_test-v3-2-3d85eb091bec@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most of our tests use rtnetlink to read device stats, so they
don't expose the drivers much to paths in which device stats
are read under RCU. Add tests which hammer profcs reads to
make sure drivers:
- don't sleep while reporting stats,
- can handle parallel reads,
- can handle device going down while reading.
Set ifname on the env class in NetDrvEnv, we already do that
in NetDrvEpEnv.
KTAP version 1
1..7
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
ok 6 stats.procfs_hammer
# completed up/down cycles: 6
ok 7 stats.procfs_downup_hammer
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250107022932.2087744-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test a more realistic usage pattern, and one with heavy contention, in order to
actually exercise ntsync's internal synchronization.
This test has several threads in a tight loop acquiring a mutex, modifying some
shared data, and then releasing the mutex. At the end we check if the data is
consistent.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-28-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wine has tests for its synchronization primitives, but these are more accessible
to kernel developers, and also allow us to test some edge cases that Wine does
not care about.
This patch adds tests for semaphore-specific ioctls NTSYNC_IOC_SEM_POST and
NTSYNC_IOC_SEM_READ, and waiting on semaphores.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-17-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This test already catches a netlink bug fixed by this series,
but only when running on HW with many queues. Make sure the
netdevsim instance created has a lot of queues, and constrain
the size of the recv_buffer used by netlink.
While at it test both rx and tx queues.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20241213152244.3080955-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add selftest case to check the send and receive throughput.
Supported link modes between local NIC driver and partner
are varied. Then send and receive throughput is captured
and verified. Test uses iperf3 tool.
Add iperf3 server/client function in GenerateTraffic class.
Signed-off-by: Mohan Prasad J <mohan.prasad@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add selftest case for testing the speed and duplex state of
local NIC driver and the partner based on the supported
link modes obtained from the ethtool. Speed and duplex states
are varied and verified using ethtool.
Signed-off-by: Mohan Prasad J <mohan.prasad@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add selftest file for the link layer tests of a NIC driver.
Test for auto-negotiation is added.
Add LinkConfig class for changing link layer configs.
Selftest makes use of ksft modules and ethtool.
Include selftest file in the Makefile.
Signed-off-by: Mohan Prasad J <mohan.prasad@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The netconsole selftest relies on the availability of the netdevsim module.
To ensure the test can run correctly, we need to check if the netdevsim
module is either loaded or built-in before proceeding.
Update the netconsole selftest to check for the existence of
the /sys/bus/netdevsim/new_device file before running the test. If the
file is not found, the test is skipped with an explanation that the
CONFIG_NETDEVSIM kernel config option may not be enabled.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241108-netcon_selftest_deps-v1-1-1789cbf3adcd@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Only RX side for now and small message to test the setup.
In the future, we can extend it to TX side and to testing
both sides with a couple of megs of data.
make \
-C tools/testing/selftests \
TARGETS="drivers/hw/net" \
install INSTALL_PATH=~/tmp/ksft
scp ~/tmp/ksft ${HOST}:
scp ~/tmp/ksft ${PEER}:
cfg+="NETIF=${DEV}\n"
cfg+="LOCAL_V6=${HOST_IP}\n"
cfg+="REMOTE_V6=${PEER_IP}\n"
cfg+="REMOTE_TYPE=ssh\n"
cfg+="REMOTE_ARGS=root@${PEER}\n"
echo -e "$cfg" | ssh root@${HOST} "cat > ksft/drivers/net/net.config"
ssh root@${HOST} "cd ksft && ./run_kselftest.sh -t drivers/net:devmem.py"
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241107181211.3934153-13-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend netcons_basic selftest to verify the userdata functionality by:
1. Creating a test key in the userdata configfs directory
2. Writing a known value to the key
3. Validating the key-value pair appears in the captured network output
This ensures the userdata feature is properly tested during selftests.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20241029090030.1793551-3-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the defer framework to schedule cleanups as soon as the command is
executed.
Note that the start_traffic commands in __burst_test() are each sending a
fixed number of packets (note the -c flag) and then ending. They therefore
do not need a matching stop_traffic.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the defer framework to schedule cleanups as soon as the command is
executed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the defer framework to schedule cleanups as soon as the command is
executed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the defer framework to schedule cleanups as soon as the command is
executed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the defer framework to schedule cleanups as soon as the command is
executed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Instead of having a suite of dedicated cleanup functions, use the defer
framework to schedule cleanups right as their setup functions are run.
The sleep after stop_traffic() in mlxsw selftests is necessary, but
scheduling it as "defer sleep; defer stop_traffic" is silly. Instead, add a
local helper to stop traffic and sleep afterwards.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
