KVM SVM changes for 6.16:
- Wait for target vCPU to acknowledge KVM_REQ_UPDATE_PROTECTED_GUEST_STATE to
fix a race between AP destroy and VMRUN.
- Decrypt and dump the VMSA in dump_vmcb() if debugging enabled for the VM.
- Add support for ALLOWED_SEV_FEATURES.
- Add #VMGEXIT to the set of handlers special cased for CONFIG_RETPOLINE=y.
- Treat DEBUGCTL[5:2] as reserved to pave the way for virtualizing features
that utilize those bits.
- Don't account temporary allocations in sev_send_update_data().
- Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM, via Bus Lock Threshold.
KVM selftests changes for 6.16:
- Add support for SNP to the various SEV selftests.
- Add a selftest to verify fastops instructions via forced emulation.
- Add MGLRU support to the access tracking perf test.
KVM/arm64 updates for 6.16
* New features:
- Add large stage-2 mapping support for non-protected pKVM guests,
clawing back some performance.
- Add UBSAN support to the standalone EL2 object used in nVHE/hVHE and
protected modes.
- Enable nested virtualisation support on systems that support it
(yes, it has been a long time coming), though it is disabled by
default.
* Improvements, fixes and cleanups:
- Large rework of the way KVM tracks architecture features and links
them with the effects of control bits. This ensures correctness of
emulation (the data is automatically extracted from the published
JSON files), and helps dealing with the evolution of the
architecture.
- Significant changes to the way pKVM tracks ownership of pages,
avoiding page table walks by storing the state in the hypervisor's
vmemmap. This in turn enables the THP support described above.
- New selftest checking the pKVM ownership transition rules
- Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests
even if the host didn't have it.
- Fixes for the address translation emulation, which happened to be
rather buggy in some specific contexts.
- Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N
from the number of counters exposed to a guest and addressing a
number of issues in the process.
- Add a new selftest for the SVE host state being corrupted by a
guest.
- Keep HCR_EL2.xMO set at all times for systems running with the
kernel at EL2, ensuring that the window for interrupts is slightly
bigger, and avoiding a pretty bad erratum on the AmpereOne HW.
- Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers
from a pretty bad case of TLB corruption unless accesses to HCR_EL2
are heavily synchronised.
- Add a per-VM, per-ITS debugfs entry to dump the state of the ITS
tables in a human-friendly fashion.
- and the usual random cleanups.
Some common KVM test cases are supported on LoongArch now as following:
coalesced_io_test
demand_paging_test
dirty_log_perf_test
dirty_log_test
guest_print_test
hardware_disable_test
kvm_binary_stats_test
kvm_create_max_vcpus
kvm_page_table_test
memslot_modification_stress_test
memslot_perf_test
set_memory_region_test
And other test cases are not supported by LoongArch such as rseq_test,
since it is not supported on LoongArch physical machine either.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add a test case to verify x86's bus lock exit functionality, which is now
supported on both Intel and AMD. Trigger bus lock exits by performing a
split-lock access, i.e. an atomic access that splits two cache lines.
Verify that the correct number of bus lock exits are generated, and that
the counter is incremented correctly and at the appropriate time based on
the underlying architecture.
Generate bus locks in both L1 and L2 (if nested virtualization is enabled),
as SVM's functionality in particular requires non-trivial logic to do the
right thing when running nested VMs.
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Co-developed-by: Manali Shukla <manali.shukla@amd.com>
Signed-off-by: Manali Shukla <manali.shukla@amd.com>
Link: https://lore.kernel.org/r/20250502050346.14274-6-manali.shukla@amd.com
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use MGLRU's debugfs interface to do access tracking instead of
page_idle. The logic to use the page_idle bitmap is left in, as it is
useful for kernels that do not have MGLRU built in.
When MGLRU is enabled, page_idle will report pages as still idle even
after being accessed, as MGLRU doesn't necessarily clear the Idle folio
flag when accessing an idle page, so the test will not attempt to use
page_idle if MGLRU is enabled but otherwise not usable.
Aging pages with MGLRU is much faster than marking pages as idle with
page_idle.
Co-developed-by: Axel Rasmussen <axelrasmussen@google.com>
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250508184649.2576210-8-jthoughton@google.com
[sean: print parsed features, not raw string]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a test to verify KVM's fastops emulation via forced emulation. KVM's
so called "fastop" infrastructure executes the to-be-emulated instruction
directly on hardware instead of manually emulating the instruction in
software, using various shenanigans to glue together the emulator context
and CPU state, e.g. to get RFLAGS fed into the instruction and back out
for the emulator.
Add testcases for all instructions that are low hanging fruit. While the
primary goal of the selftest is to validate the glue code, a secondary
goal is to ensure "emulation" matches hardware exactly, including for
arithmetic flags that are architecturally undefined. While arithmetic
flags may be *architecturally* undefined, their behavior is deterministic
for a given CPU (likely a given uarch, and possibly even an entire family
or class of CPUs). I.e. KVM has effectively been emulating underlying
hardware behavior for years.
Link: https://lore.kernel.org/r/20250506011250.1089254-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Until recently, the kernel could unexpectedly discard SVE state for a
period after a KVM_RUN ioctl, when the guest did not execute any
FPSIMD/SVE/SME instructions. We fixed that issue in commit:
fbc7e61195 ("KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state")
Add a test which tries to provoke that issue by manipulating SVE state
before/after running a guest which does not execute any FPSIMD/SVE/SME
instructions. The test executes a handful of iterations to miminize
the risk that the issue is masked by preemption.
Signed-off--by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250417-kvm-selftest-sve-signal-v1-1-6330c2f3da0c@kernel.org
[maz: Restored MR's SoB, fixed commit message according to MR's write-up]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Several tests cover infrastructure from virt/kvm/ and userspace APIs that have
only minimal requirements from architecture-specific code. As such, they are
available on all architectures that have libkvm support, and this presumably
will apply also in the future (for example if loongarch gets selftests support).
Put them in a separate variable and list them only once.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250401141327.785520-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a rudimentary test for validating KVM's handling of L1 hypervisor
intercepts during instruction emulation on behalf of L2. To minimize
complexity and avoid overlap with other tests, only validate KVM's
handling of instructions that L1 wants to intercept, i.e. that generate a
nested VM-Exit. Full testing of emulation on behalf of L2 is better
achieved by running existing (forced) emulation tests in a VM, (although
on VMX, getting L0 to emulate on #UD requires modifying either L1 KVM to
not intercept #UD, or modifying L0 KVM to prioritize L0's exception
intercepts over L1's intercepts, as is done by KVM for SVM).
Since emulation should never be successful, i.e. L2 always exits to L1,
dynamically generate the L2 code stream instead of adding a helper for
each instruction. Doing so requires hand coding instruction opcodes, but
makes it significantly easier for the test to compute the expected "next
RIP" and instruction length.
Link: https://lore.kernel.org/r/20250201015518.689704-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that KVM selftests uses the kernel's canonical arch paths, directly
override ARCH to 'x86' when targeting x86_64 instead of defining ARCH_DIR
to redirect to appropriate paths. ARCH_DIR was originally added to deal
with KVM selftests using the target triple ARCH for directories, e.g.
s390x and aarch64; keeping it around just to deal with the one-off alias
from x86_64=>x86 is unnecessary and confusing.
Note, even when selftests are built from the top-level Makefile, ARCH is
scoped to KVM's makefiles, i.e. overriding ARCH won't trip up some other
selftests that (somehow) expects x86_64 and can't work with x86.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20241128005547.4077116-17-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the kernel's canonical $(ARCH) paths instead of the raw target triple
for KVM selftests directories. KVM selftests are quite nearly the only
place in the entire kernel that using the target triple for directories,
tools/testing/selftests/drivers/s390x being the lone holdout.
Using the kernel's preferred nomenclature eliminates the minor, but
annoying, friction of having to translate to KVM's selftests directories,
e.g. for pattern matching, opening files, running selftests, etc.
Opportunsitically delete file comments that reference the full path of the
file, as they are obviously prone to becoming stale, and serve no known
purpose.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20241128005547.4077116-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Provide empty targets for KVM selftests if the target architecture is
unsupported to make it obvious which architectures are supported, and so
that various side effects don't fail and/or do weird things, e.g. as is,
"mkdir -p $(sort $(dir $(TEST_GEN_PROGS)))" fails due to a missing operand,
and conversely, "$(shell mkdir -p $(sort $(OUTPUT)/$(ARCH_DIR) ..." will
create an empty, useless directory for the unsupported architecture.
Move the guts of the Makefile to Makefile.kvm so that it's easier to see
that the if-statement effectively guards all of KVM selftests.
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20241128005547.4077116-15-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
