Pull clk updates from Stephen Boyd:
"This is the usual collection of primarily clk driver updates.
The big part of the diff is all the new Qualcomm clk drivers added for
a few SoCs they're working on. The other two vendors with significant
work this cycle are Renesas and Amlogic. Renesas adds a bunch of clks
to existing drivers and supports some new SoCs while Amlogic is
starting a significant refactoring to simplify their code.
The core framework gained a pair of helpers to get the 'struct device'
or 'struct device_node' associated with a 'struct clk_hw'. Some
associated KUnit tests were added for these simple helpers as well.
Beyond that core change there are lots of little fixes throughout the
clk drivers for the stuff we see every day, wrong clk driver data that
affects tree topology or supported frequencies, etc. They're not found
until the clks are actually used by some consumer device driver.
New Drivers:
- Global, display, gpu, video, camera, tcsr, and rpmh clock
controller for the Qualcomm Milos SoC
- Camera, display, GPU, and video clock controllers for Qualcomm
QCS615
- Video clock controller driver for Qualcomm SM6350
- Camera clock controller driver for Qualcomm SC8180X
- I3C clocks and resets on Renesas RZ/G3E
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/V2H(P) and RZ/V2N
- SPI (RSPI) clocks and resets on Renesas RZ/V2H(P)
- SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H
- Ethernet clocks and resets on Renesas RZ/G3E
- Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H
(R9A09G087) SoCs
- Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N
- Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas
RZ/V2N
Updates:
- Support atomic PWMs in the PWM clk driver
- clk_hw_get_dev() and clk_hw_get_of_node() helpers
- Replace round_rate() with determine_rate() in various clk drivers
- Convert clk DT bindings to DT schema format for DT validation
- Various clk driver cleanups and refactorings from static analysis
tools and possibly real humans
- A lot of little fixes here and there to things like clk tree
topology, missing frequencies, flagging clks as critical, etc"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (216 commits)
clk: clocking-wizard: Fix the round rate handling for versal
clk: Fix typos
clk: spacemit: ccu_pll: fix error return value in recalc_rate callback
clk: tegra: periph: Make tegra_clk_periph_ops static
clk: tegra: periph: Fix error handling and resolve unsigned compare warning
clk: imx: scu: convert from round_rate() to determine_rate()
clk: imx: pllv4: convert from round_rate() to determine_rate()
clk: imx: pllv3: convert from round_rate() to determine_rate()
clk: imx: pllv2: convert from round_rate() to determine_rate()
clk: imx: pll14xx: convert from round_rate() to determine_rate()
clk: imx: pfd: convert from round_rate() to determine_rate()
clk: imx: frac-pll: convert from round_rate() to determine_rate()
clk: imx: fracn-gppll: convert from round_rate() to determine_rate()
clk: imx: fixup-div: convert from round_rate() to determine_rate()
clk: imx: cpu: convert from round_rate() to determine_rate()
clk: imx: busy: convert from round_rate() to determine_rate()
clk: imx: composite-93: remove round_rate() in favor of determine_rate()
clk: imx: composite-8m: remove round_rate() in favor of determine_rate()
clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls
clk: imx: Remove redundant pm_runtime_mark_last_busy() calls
...
Pull MFD updates from Lee Jones:
"New Support & Features:
- Add extensive support for the Analog Devices ADP5589 I/O expander,
including core MFD, GPIO, PWM, and a new keypad matrix input
driver. This also adds support for handling various events
including GPI, keypad, reset and unlock ev ents
- Add support for the TI TPS652G1 PMIC, a stripped-down version of
the TPS65224, including core MFD, PFSM, pinctrl, and GPIO support
- Add support for the Apple Silicon System Management Controller
(SMC), including the core MFD driver which handles the RTKit-based
protocol, a new GPIO driver for PMU GPIOs, and a new
reboot/power-off driver.
Improvements & Fixes:
- Dynamically add ADP5585 sub-devices based on device tree properties
- Move ADP5585 oscillator control from the child PWM driver to the
main MFD driver to better handle shared resources
- Add support for a hardware reset pin and VDD regulator to the
ADP5585 driver
- Update the TPS65219 MFD cell's GPIO compatible string for the
TPS65214 to reflect hardware capabilities correctly
- Separate the ChromeOS EC charge-control probing from the USB-PD
subsystem, allowing it to probe independently based on the
dedicated EC_FEATURE_CHARGER
- Fix an interrupt naming typo in the MT6370 driver
- Fix RK806 PMIC reset behavior by allowing the reset mode to be
customized via a new device tree property
- Fix AXP20X regulator cell ID conflicts for secondary PMICs on
boards without an IRQ line connected
- Fix MT6397 keypad sub-device creation to use specific names instead
of a generic one, ensuring correct driver binding
- Fix a build warning in the stm32-timers driver by adding a missing
include for export.h.
Cleanups & Refactoring:
- Refactor the ADP5585 driver to simplify how regmap defaults are
handled, making it easier to add new chip variants
- Introduce per-chip register map structures for the ADP5585/ADP5589
family to handle differences between the devices
- Convert several drivers to use dev_fwnode() instead of
of_fwnode_handle()
- Make various static structures const in the cs40l50, rohm-bd71828,
tps65219, and twl6040 drivers
- Remove redundant pm_runtime_mark_last_busy() calls from several
drivers
- Alphabetize Kconfig entries for Cirrus Logic and Maxim drivers
- Remove unused fields from the 'tps65219' struct
- Update several MFD-related headers to follow the 'Include What You
Use' (IWYU) principle.
Removals:
- Remove the old, platform-data-based adp5589-keys input driver,
which is now superseded by the new MFD-based adp5585-keys driver
- Remove the unused twl6030_mmc_card_detect() functions and
associated header declarations
- Remove the now unused pcf50633/core.h header file
- Remove the fsl,imx8qxp-csr device tree binding, which was being
used incorrectly.
Device Tree Bindings Updates:
- Add support for the Analog Devices ADP5589 I/O expander to the
adi,adp5585.yaml binding
- Add new properties to the adi,adp5585.yaml binding for input
events, including keypad pins, unlock events, and reset events
- Add a reset-gpios property to the adi,adp5585.yaml binding
- Add the TI TPS652G1 PMIC to the ti,tps6594.yaml binding
- Add new bindings for the Apple Mac System Management Controller
(SMC) and its sub-devices: apple,smc.yaml, apple,smc-gpio.yaml, and
apple,smc-reboot.yaml
- Convert the Freescale MXS LRADC binding (mxs-lradc) to YAML schema
format
- Convert and combine the NXP LPC1850 CREG, DMAMUX, and USB OTG PHY
bindings into a single YAML schema file
- Convert the TI TPS65910 binding to YAML schema format
- Add a comment to the samsung,s2mps11.yaml binding to clarify the
use of 'oneOf' for interrupt properties
- Add the rockchip,reset-mode property to the rockchip,rk806.yaml
binding to allow customization of the PMIC's reset behavior"
* tag 'mfd-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (28 commits)
mfd: dt-bindings: Convert TPS65910 to DT schema
mfd: Minor Cirrus/Maxim Kconfig order fixes
mfd: Remove redundant pm_runtime_mark_last_busy() calls
mfd: mt6397: Do not use generic name for keypad sub-devices
mfd: axp20x: Set explicit ID for regulator cell if no IRQ line is present
mfd: mt6370: Fix the interrupt naming typo
mfd: rk8xx-core: Allow to customize RK806 reset mode
dt-bindings: mfd: rk806: Allow to customize PMIC reset mode
mfd: syscon: atmel-smc: Don't use "proxy" headers
mfd: madera: Don't use "proxy" headers
mfd: wm8350-core: Don't use "proxy" headers
dt-bindings: mfd: samsung,s2mps11: Add comment about interrupts properties
mfd: davinci_voicecodec: Don't use "proxy" headers
mfd: pcf50633: Remove the header file core.h
mfd: tps65219: Remove another unused field from 'struct tps65219'
mfd: tps65219: Remove an unused field from 'struct tps65219'
mfd: tps65219: Constify struct regmap_irq_sub_irq_map and tps65219_chip_data
mfd: rohm-bd71828: Constify some structures
dt-bindings: mfd: fsl,imx8qxp-csr: Remove binding documentation
mfd: axp20x: Set explicit ID for AXP313 regulator
...
Resolve conflicts with i.MX95 changes 88768d6f8c ("clk:
imx95-blk-ctl: Rename lvds and displaymix csr blk") in clk-imx
and aacc875a44 ("clk: imx: Fix an out-of-bounds access in
dispmix_csr_clk_dev_data") in clk-fixes.
* clk-fixes:
clk: sunxi-ng: v3s: Fix TCON clock parents
clk: sunxi-ng: v3s: Fix CSI1 MCLK clock name
clk: sunxi-ng: v3s: Fix CSI SCLK clock name
dt-bindings: clock: mediatek: Add #reset-cells property for MT8188
clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data
clk: scmi: Handle case where child clocks are initialized before their parents
clk: sunxi-ng: a523: Mark MBUS clock as critical
Pull SoC devicetree updates from Arnd Bergmann:
"There are a few new variants of existing chips:
- mt6572 is an older mobile phone chip from mediatek that was
extremely popular a decade ago but never got upstreamed until now
- exynos2200 is a recent high-end mobile phone chip used in a few
Samsung phones like the Galaxy S22
- Renesas R-Car V4M-7 (R8A779H2) is an updated version of R-Car V4M
(R8A779H0) and used in automotive applications
- Tegra264 is a new chip from NVIDIA, but support is fairly minimal
for now, and not much information is public about it
There are five more chips in a separate branch, as those are new chip
families that I merged along with the necessary infrastructure.
New board support is not that exciting, with a total of 33 newly added
machines here:
- Evaluation platforms for the chips above, plus TI am62d2 and Sophgo
sg2042
- Six 32-bit industrial boards based on stm32, imx6 and am33 chips,
plus eight 64-bit rockchips rk33xx/rk35xx, am62d2, t527, imx8 and
imx95
- Two newly added ASPEED BMC based motherboards, and one that got
removed
- Phones and Tablets based on 32-bit mt6572, tegra30 and 64-bit
msm8976 SoCs
- Three Laptops based on Mediatek mt8186 and Qualcomm Snapdragon X1
- A set-top box based on Amlogic meson-gxm
Updates for existing machines are spread over all the above families.
One notable change here is support for the RP1 I/O chip used in
Raspberry Pi 5"
* tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (606 commits)
riscv: dts: sophgo: fix mdio node name for CV180X
riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device
riscv: dts: sophgo: add Sophgo SG2042_EVB_V2.0 board device tree
riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree
dt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindings
riscv: dts: sophgo: add ethernet GMAC device for sg2042
riscv: dts: sophgo: Enable ethernet device for Huashan Pi
riscv: dts: sophgo: Add mdio multiplexer device for cv18xx
riscv: dts: sophgo: Add ethernet device for cv18xx
riscv: dts: sophgo: sg2044: add pmu configuration
riscv: dts: sophgo: sg2044: add ziccrse extension
riscv: dts: sophgo: add zfh for sg2042
riscv: dts: sophgo: add ziccrse for sg2042
riscv: dts: sophgo: Add xtheadvector to the sg2042 devicetree
riscv: dts: sophgo: sg2044: add PCIe device support for SG2044
riscv: dts: sophgo: sg2044: add MSI device support for SG2044
riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC
riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC
dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000
riscv: dts: sophgo: sg2044: Add missing riscv,cbop-block-size property
...
Combine the following separate plain text based bindings to YAML:
lpc1850-creg-clk.txt
pc1850-dmamux.txt
phy-lpc18xx-usb-otg.txt
Additional changes:
- remove label in example.
- remove dmamux consumer in example.
- remove clock consumer in example.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250602143612.943516-1-Frank.Li@nxp.com
Signed-off-by: Lee Jones <lee@kernel.org>
Qualcomm Arm64 DeviceTree updates for v6.17
79b896e7da arm64: dts: qcom: msm8976-longcheer-l9360: Add initial device tree
6516961352 arm64: dts: qcom: Add support for X1-based Asus Zenbook A14
The DB410c D3 camera mezzanine is converted to an overlay.
On MSM8976 SDC2 pinctrl definitions are introduced and BLSP DMA
controller is marked to be managed by another entity.
Add camera subsystem on the QCM2290 platform.
Add and enable remoteproc and related devices on QCS615.
Add and enable Video encoder/decoder on QCS8300 and SA8775P.
Also on SA8775P add CPU OPP tables for scaling DDR/L3 bandwidth based on
CPU frequency, add L3 interconnect definitions, DSI and video
encoder/decoder support.
Enable the SLPI remoteproc on SDM850-based Lenovo Yoga C630.
On SM6350, add the video clock controller, APR and some audio related
services.
Describe the camera subsystem on SM8550 and add Iris video
encoder/decoder node for SM8650.
On SM8750 introduce UFS and Soundwire support, enable these and describe
the sound hardware on MTP and QRD.
Add camera clock controller on SC8180X.
On X Elite, for the Dell XPS13, add WiFi and Bluetooth pwrseq and enable
the fingerprint sensor. For HP Omnibook X14 USB1 SS1 SBU mux and do
some misc cleanup.
Replace the thermal zones inherited from X Elite with X Plus-specific
ones.
Add missing interrupts and clean up unrelated clocks for PCIe
controllers across a variety of platforms.
* tag 'qcom-arm64-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (67 commits)
arm64: dts: qcom: sm8150: Drop unrelated clocks from PCIe hosts
arm64: dts: qcom: sc8180x: Drop unrelated clocks from PCIe hosts
arm64: dts: qcom: x1-asus-zenbook: support sound
arm64: dts: qcom: x1-asus-zenbook: fixup GPU nodes
arm64: dts: qcom: sm6115: add debug UART pins
arm64: dts: qcom: sm8650: add iris DT node
arm64: dts: qcom: msm8976-longcheer-l9360: Add initial device tree
arm64: dts: qcom: msm8976: Add sdc2 GPIOs
dt-bindings: arm: qcom: Add MSM8976 BQ Aquaris X5 Plus
arm64: dts: qcom: msm8976: Make blsp_dma controlled-remotely
arm64: dts: qcom: sa8775p: Correct the interrupt for remoteproc
arm64: dts: qcom: sm8550: Add support for camss
arm64: dts: qcom: qcs615: disable the CTI device of the camera block
arm64: dts: qcom: qcs615-ride: enable remoteprocs
arm64: dts: qcom: qcs615: add ADSP and CDSP nodes
arm64: dts: qcom: qcs615: Add IMEM and PIL info region
arm64: dts: qcom: qcs615: Add mproc node for SEMP2P
arm64: dts: qcom: Add support for X1-based Asus Zenbook A14
arm64: dts: qcom: sc7180: Expand IMEM region
arm64: dts: qcom: sdm845: Expand IMEM region
...
Link: https://lore.kernel.org/r/20250716031059.76348-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As the MT7628 and MT7688 are identical in most respects, mt7628a.dtsi is
used for both SoCs. To prevent "Kernel panic - not syncing: unable to
get CPU clock, err=-2" and allow an MT7688-based board to boot, the
following must be allowed:
compatible = "ralink,mt7628-sysc", "ralink,mt7688-sysc", "syscon";
Signed-off-by: Ezra Buehler <ezra.buehler@husqvarnagroup.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Renesas RZ/N2H DT Binding Definitions
DT bindings and binding definitions for the Renesas RZ/N2H (R9A09G087)
SoC, shared by driver and DT source files.
