Pull pin control updates from Linus Walleij:
"Nothing stands out, apart from maybe the interesting Eswin EIC7700, a
RISC-V SoC I've never seen before.
Core changes:
- Open code PINCTRL_FUNCTION_DESC() instead of defining a complex
macro only used in one place
- Add pinmux_generic_add_pinfunction() helper and use this in a few
drivers
New drivers:
- Amlogic S7, S7D and S6 pin control support
- Eswin EIC7700 pin control support
- Qualcomm PMIV0104, PM7550 and Milos pin control support
Because of unhelpful numbering schemes, the Qualcomm driver now
needs to start to rely on SoC codenames
- STM32 HDP pin control support
- Mediatek MT8189 pin control support
Improvements:
- Switch remaining pin control drivers over to the new GPIO set
callback that provides a return value
- Support RSVD (reserved) pins in the STM32 driver
- Move many fixed assignments over to pinctrl_desc definitions
- Handle multiple TLMM regions in the Qualcomm driver"
* tag 'pinctrl-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits)
pinctrl: mediatek: Add pinctrl driver for mt8189
dt-bindings: pinctrl: mediatek: Add support for mt8189
pinctrl: aspeed-g6: Add PCIe RC PERST pin group
pinctrl: ingenic: use pinmux_generic_add_pinfunction()
pinctrl: keembay: use pinmux_generic_add_pinfunction()
pinctrl: mediatek: moore: use pinmux_generic_add_pinfunction()
pinctrl: airoha: use pinmux_generic_add_pinfunction()
pinctrl: equilibrium: use pinmux_generic_add_pinfunction()
pinctrl: provide pinmux_generic_add_pinfunction()
pinctrl: pinmux: open-code PINCTRL_FUNCTION_DESC()
pinctrl: ma35: use new GPIO line value setter callbacks
MAINTAINERS: add Clément Le Goffic as STM32 HDP maintainer
pinctrl: stm32: Introduce HDP driver
dt-bindings: pinctrl: stm32: Introduce HDP
pinctrl: qcom: Add Milos pinctrl driver
dt-bindings: pinctrl: document the Milos Top Level Mode Multiplexer
pinctrl: qcom: spmi: Add PM7550
dt-bindings: pinctrl: qcom,pmic-gpio: Add PM7550 support
pinctrl: qcom: spmi: Add PMIV0104
dt-bindings: pinctrl: qcom,pmic-gpio: Add PMIV0104 support
...
This pull request contains Broadcom ARM64-based SoCs Device Tree updates
for 6.17, please pull the following:
- Linus updates the 64-bit BCMBCA SoCs Device Tree with the common
peripherals that exit as well as correct IRQ assignments
- Andrea adds support for the RP1 companion chip on the Raspberry Pi 5
systems with clocks, gpios, pinctrl, all of that using an overlay to
describe those peripherals
- Rob drops the interrupt-parent property from the GICv2M node on
Northstar2 SoCs
* tag 'arm-soc/for-6.17/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: northstar2: Drop GIC V2M "interrupt-parent"
arm64: dts: broadcom: Add overlay for RP1 device
arm64: dts: broadcom: Add board DTS for Rpi5 which includes RP1 node
arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5
arm64: dts: rp1: Add support for RaspberryPi's RP1 device
dt-bindings: misc: Add device specific bindings for RaspberryPi RP1
dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
dt-bindings: clock: Add RaspberryPi RP1 clock bindings
ARM64: dts: bcm63158: Add BCMBCA peripherals
ARM64: dts: bcm6858: Add BCMBCA peripherals
ARM64: dts: bcm6856: Add BCMBCA peripherals
ARM64: dts: bcm4908: Add BCMBCA peripherals
Link: https://lore.kernel.org/r/20250630190216.1518354-3-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With the introduction of the RK3576, the maximum device function ID used
increased to 14, as anyone can easily verify for themselves with:
rg -g '*-pinctrl.dtsi' '<\d+\s+RK_P..\s+(?<func>\d+)\s.*>;$' --trim \
-NI -r '$func' arch/arm64/boot/dts/rockchip/ | sort -g | uniq
Unfortunately, this wasn't caught by dt-validate as those pins are
omit-if-no-ref and we had no reference to them in any tree so far.
Once again kick the can down the road by increasing the limit to 14.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/20250602-rk3576-pwm-v2-1-a6434b0ce60c@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Pull pin control updates from Linus Walleij:
"An especially linear and sparse improvement and new drivers release.
Nothing exciting. The biggest change in Bartosz changes to make
gpiochip set/get calls return error codes (something we should have
fixed ages ago but is now finally getting fixed.)
Core changes:
- Add the devres devm_pinctrl_register_mappings() call that can
register some pin control machine mappings and have them go away
with the associated device
New drivers:
- Support for the Mediatek MT6893 and MT8196 SoCs
- Support for the Renesas RZ/V2N SoC
- Support for the NXP Freescale i.MX943 SoC
Improvements:
- Per-SoC suspend/resume callbacks in the Samsung drivers
- Set all pins as input (High-Z) at probe in the MCP23S08 driver
- Switch most GPIO chips to use the setters/getters with a return
value
- EGPIO support in the Qualcomm QCM2290 driver
- Fix up the number of available GPIO lines in Qualcomm QCS8300 and
QCS615"
* tag 'pinctrl-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits)
pinctrl: freescale: Add support for imx943 pinctrl
pinctrl: core: add devm_pinctrl_register_mappings()
pinctrl: remove extern specifier for functions in machine.h
pinctrl: mediatek: eint: Fix invalid pointer dereference for v1 platforms
pinctrl: freescale: Enable driver if platform is enabled.
pinctrl: freescale: Depend imx-scu driver on OF
pinctrl: armada-37xx: propagate error from armada_37xx_pmx_set_by_name()
pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get_direction()
pinctrl: armada-37xx: propagate error from armada_37xx_pmx_gpio_set_direction()
pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get()
pinctrl: armada-37xx: propagate error from armada_37xx_gpio_direction_output()
pinctrl: armada-37xx: set GPIO output value before setting direction
pinctrl: armada-37xx: use correct OUTPUT_VAL register for GPIOs > 31
pinctrl: meson: Drop unused aml_pctl_find_group_by_name()
pinctrl: at91: Fix possible out-of-boundary access
pinctrl: add stubs for OF-specific pinconf functions
pinctrl: qcom: correct the ngpios entry for QCS8300
pinctrl: qcom: correct the ngpios entry for QCS615
dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs8300
dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs615
...
Pull clk updates from Stephen Boyd:
"This has been a semi-quiet cycle. The core framework remains unchanged
this time around.
In terms of shiny new code though, we have support for the SpacemiT K1
SoC, Sophgo SG2044, and T-HEAD TH1520 VO clk drivers joining the usual
silicon players like Qualcomm, Samsung, Allwinner, and Renesas.
Surprisingly, the Qualcomm pile was smaller than usual but that is
likely because they put one SoC support inside a driver for a
different SoC that is very similar.
Other than all those new clk drivers there are the usual clk data
updates to fix parents, frequency tables, and add missing clks along
with some Kconfig changes to make compile testing simpler and even
more DT binding conversions to boot.
The exciting part is still the new SoC support like SpacemiT and
Sophgo support though, which really dominate the diffstat because they
introduce a whole new silicon vendor clk driver.
New Drivers:
- Camera clock controller driver for Qualcomm QCS8300
- DE (display engine) 3.3 clocks on Allwinner H616
- Samsung ExynosAutov920 CPU cluster CL0, CL1 and CL2 clock controllers
- Video Output (VO) subsystem clk controller in the T-HEAD TH1520 SoC
- Clock driver for Sophgo SG2044
- Clock driver for SpacemiT K1 SoC
- Renesas RZ/V2N (R9A09G056) SoC clk driver
Updates:
- Correct data in various SoC clk drivers
- Allow clkaN to be optional in the Qualcomm RPMh clock controller
driver if command db doesn't define it
- Change Kconfig options to not enable by default during compile
testing
- Add missing clks in various SoC clk drivers
- Remove some duplicate clk DT bindings and convert some more to
YAML"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits)
clk: qcom: gcc-x1e80100: Set FORCE MEM CORE for UFS clocks
clk: qcom: gcc: Set FORCE_MEM_CORE_ON for gcc_ufs_axi_clk for 8650/8750
clk: qcom: rpmh: make clkaN optional
clk: qcom: Add support for Camera Clock Controller on QCS8300
clk: rockchip: rk3528: add slab.h header include
clk: rockchip: rk3576: add missing slab.h include
clk: meson: Do not enable by default during compile testing
clk: meson-g12a: add missing fclk_div2 to spicc
clk: qcom: gcc-msm8939: Fix mclk0 & mclk1 for 24 MHz
clk: rockchip: rename gate-grf clk file
clk: rockchip: rename branch_muxgrf to branch_grf_mux
clk: sunxi-ng: ccu: add Display Engine 3.3 (DE33) support
dt-bindings: allwinner: add H616 DE33 clock binding
clk: samsung: correct clock summary for hsi1 block
dt-bindings: clock: add SM6350 QCOM video clock bindings
clk: rockchip: Pass NULL as reg pointer when registering GRF MMC clocks
clk: sunxi-ng: h616: Add LVDS reset for LCD TCON
dt-bindings: clock: sun50i-h616-ccu: Add LVDS reset
clk: rockchip: rk3036: mark ddrphy as critical
clk: rockchip: rk3036: fix implementation of usb480m clock mux
...
Samsung pinctrl drivers changes for v6.15
1. Add pin controller drivers for newly usptreamed Samsung Exynos2200
and Exynos7870.
2. Correct filter configuration offset of some of Google GS101 SoC pin
banks, which later is supposed to be used during system
suspend/resume.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The A523 contains a pin controller similar to previous SoCs, although
using 10 GPIO banks (PortB-PortK), all of them being IRQ capable.
With this SoC we introduce a new style of binding, where the pinmux values
for each pin group are stored in the new "allwinner,pinmux" property in
the DT node, instead of requiring every driver to store a mapping between
the function names and the required pinmux.
Add a new binding file, since all the different variants of the old
binding are making the file a bit unwieldy to handle already, and the new
property would make the situation worse.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/20250306235827.4895-7-andre.przywara@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
SG2042 introduces a simple pinctrl device for all configurable pins.
For the SG2042 pinctl register file, each register (32 bits) is
responsible for two pins, each occupying the upper 16 bits and lower
16 bits of the register. It supports setting pull up/down, drive
strength and input schmitt trigger.
Add support for SG2042 pinctrl device.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/20250211051801.470800-6-inochiama@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: renesas: Updates for v6.14 (take two)
- Add support for alpha-numerical port references on the RZ/V2H SoC,
- Add support for the RZ/G3E (R9A09G047) Soc.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
