'struct timing_generator_funcs' are not modified in these drivers.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
It is possible for an update to acquire otg lock and begin programming
while the previous update has not completed and its values have not
latched. The correct way to go about this is to wait until the vupdate
pulses so we can be sure that previous updates have latched and we can
continue with the current update pipe programming, otherwise during
consecutive full updates we will have corruption flash on the screen.
The corruption flash occurs specifically on configs that require odm
combine, and its local to a specific pipe (will not flash across whole
screen). This ticket is across the otg slave, but it may also appear
across master.
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Knowing the destination of OTG's vertical interrupt 2 is useful for
debugging, but it is not currently included in the OTG state readback
logic
[How]
Read the OTG interrupt destination register to get the vertical interrupt
2 destination on ASICs that have this register when reading back the OTG
state from hardware
Reviewed-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Have the need to specify the CRC window on specific CRC engine.
dc_stream_configure_crc() today calculates CRC on crc engine 0 only and always
resets CRC engine at first.
[How]
Add index parameter to dc_stream_configure_crc() for selecting the desired crc
engine. Additionally, add another parameter to specify whether to skip the
default reset of crc engine.
Reviewed-by: HaoPing Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Before every full update we must wait for all pending updates to be
cleared - this is particularly important for minimal transitions
because if we don't wait for pending cleared, it will be as if
there was no minimal transition at all. In OTG we must read 3 different
status registers for pending cleared, one specifically for OTG updates,
one specifically for OPTC updates, and the last for surface related
updates.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The parameters segment_width and last_segment_width are used to control
the configuration of the Output Plane Processor (OPP), specifically the
width of each segment that the display is divided into and the width of
the last segment
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/optc/dcn35/dcn35_optc.c:59: warning: Function parameter or struct member 'segment_width' not described in 'optc35_set_odm_combine'
drivers/gpu/drm/amd/amdgpu/../display/dc/optc/dcn35/dcn35_optc.c:59: warning: Function parameter or struct member 'last_segment_width' not described in 'optc35_set_odm_combine'
drivers/gpu/drm/amd/amdgpu/../display/dc/optc/dcn35/dcn35_optc.c:59: warning: Excess function parameter 'timing' description in 'optc35_set_odm_combine'
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Currently 3-tap chroma subsampling is used for YCbCr422/420. When ODM
pipesplit is used, pixels on the left edge of ODM slices need one extra
pixel from the right edge of the previous slice to calculate the correct
chroma value.
Without this change, the chroma value is slightly different than
expected. This is usually imperceptible visually, but it impacts test
pattern CRCs for compliance test automation.
[HOW]
Update logic to use the register for adding extra left edge pixel for
YCbCr422/420 ODM cases.
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We want to support low hz case, but the original
vtotal/vtotal_min/vtotal_max can't support more
than 0x7FFF.
[HOW]
We use the 2 HW reg to contorl long vblank case.
1. OTG_V_COUNT_STOP_CONTROL -> vcount_stop
2. OTG_V_COUNT_STOP_CONTROL2 -> vcount_stop_timer
vcount_stop define from which line we stop using vcount
and start using vcount2.
vcount_stop_timer define how long we use vcount2.
Ex:
Vtotal = 7
OTG_V_COUNT_STOP_CONTROL = 4
OTG_V_COUNT_STOP_CONTROL2 = 5
time : 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
vcount : 0, 1, 2, 3, - - - - - 4, 5, 6
vcount2 : 0, 1, 2, 3, 4,
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: ChunTao Tso <chuntao.tso@amd.com>
Signed-off-by: Robin Chen<robin.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If an OPP is used for a different OPTC without first being disconnected
from the previous OPTC, unexpected behaviour can occur. This also
applies to phantom pipes, which is what the current logic missed.
[How]
Disconnect OPPs from OPTC for phantom pipes before disabling OTG master.
Also move the disconnection to before the OTG master disable, since the
register is double buffered.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Under some circumstances, disabling an OPTC and attempting to reclaim
its OPP(s) for a different OPTC could cause a hang/underflow due to OPPs
not being properly disconnected from the disabled OPTC.
[How]
Ensure that all OPPs are unassigned from an OPTC when it gets disabled.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Move all optc files to unique
folder optc.
[how]
creating optc repo in dc, and moved the dcnxx_optc.c and .h files into
corresponding new folders inside the optc and cleared the linkage
errors by adding relative paths in the Makefile.template.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Parandhaman K <parandhaman.k@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
