This is a scripted split of the display related register macros from
i915_reg.h to display/intel_display_regs.h. As a starting point, move
all the macros that are only used in display code (or GVT). If there are
users in core i915 code or soc/, or no users anywhere, keep the macros
in i915_reg.h. This is done in groups of macros separated by blank
lines, moving the comments along with the groups.
Some manually picked macro groups are kept/moved regardless of the
heuristics above.
This is obviously a very crude approach. It's not perfect. But there are
4.2k lines in i915_reg.h, and its refactoring has ground to a halt. This
is the big hammer that splits the file to two, and enables further
cleanup.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> # v2
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250606102256.2080073-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Hook up PIPEDMC interrupts. We'll need these for:
- flip queue signalling
- GTT/ATS faults on LNL+
- unclaimed register access errors (supposedly that is what
the error interrupt indicated according to Windows code).
On LNL+ we get a new level of interrupts registers PIPEDMC_INTERRUPT*.
On earlier platforms we only have the INT_VECTOR field in the
PIPEDMC_STATUS registers, whose values are defined by the firmware.
For now we'll enable the interrupts on LNL+ only. For earlier platforms
it's not clear that there is any use for these interrupts, and some
ADL machines have exhibited spurious DE_PIPE interrupts with the
PIPEDMC interrupts unmasked/enabled. We can revisit enabling these
for earlier platforms in the future.
For some unknown reason LNL pipe B triggers the error interrupt
during the first DC state transition (subsequent transitions are
maybe OK?). No clear idea what's going on here yet, so keep the
error interrupt disabled for now.
Similar to DSB interrupt registers, the unused bits in
PIPEDMC_INTERRUPT* seem to act like randomg r/w bits (instead
of being hardwired to 0 like one would expect), and so we'll try
to avoid setting them so that we don't mistake them for real
interrupts.
v2: Only enable/unmask for LNL+
Keep the flip queue interrupt masked off for now since
we don't have a use for it yet
v3: Also keep the error interrupt masked off for now due to
LNL pipe B triggering it
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250514174257.8708-1-ville.syrjala@linux.intel.com
Observe that i915->irq_lock is no longer used to protect anything
outside of display. Make it a display thing.
This allows us to remove the ugly #define irq_lock irq.lock hack from xe
compat header.
Note that this is slightly more subtle than it first looks. For i915,
there's no functional change here. The lock is moved. However, for xe,
we'll now have *two* locks, xe->irq.lock and display->irq.lock. These
should protect different things, though. Indeed, nesting in the past
would've lead to a deadlock because they were the same lock.
With the i915 references gone, we can make a handful more files
independent of i915_drv.h.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/6d8d2ce0f34a9c7361a5e2fcf96bb32a34c57e76.1746536745.git.jani.nikula@intel.com
[Jani: Fixed a comment while applying.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This patch is applying workaround for underrun on idle PSR HW issue
(Wa_16025596647) when PSR is getting enabled. It uses vblank enable/disable
status, DC5/6 enabled disabled and enabled pipes count information made
available.
This patch is also adding calls to dc5/dc6, vblank enable/disable and pipe
enable/disable notification functions as needed.
intel_psr_needs_block_dc_vblank is modified to get vblank enable/disable
notification on PSR capable system.
v2: use intel_dmc interface instead of directly writing dmc register
Bspec: 74151
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-12-jouni.hogander@intel.com
Now that INTEL_PCH_TYPE() and HAS_PCH_*() macros are under display, and
accept a struct intel_display pointer, use that instead of struct
drm_i915_private pointer in display code.
This is done naively by running:
$ sed -i 's/\(INTEL_PCH_TYPE\|HAS_PCH_[A-Z0-9_-]*\)([^)]*)/\1(display)/g' \
$(find drivers/gpu/drm/i915/display -name "*.c")
and fixing the fallout, i.e. removing unused local i915 variables and
adding display variables where needed.
v2: Rebase
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://lore.kernel.org/r/999f4d7b8ed11739b1c5ec8d6408fc39d5e3776b.1744880985.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Hook up the display fault irq handlers for VLV/CHV.
Unfortunately the actual hardware doesn't agree with the
spec on how DPINVGTT should behave. The docs claim that
the status bits can be cleared by writing '1' to them,
but in reality there doesn't seem to be any way to clear
them. So we must disable and ignore any fault we've already
seen in the past. The entire register does reset when
the display power well goes down, so we can just always
re-enable all the bits in irq postinstall without having
to track the state beyond that.
v2: Use intel_display instead of dev_priv
Move xe gen2_error_{init,reset}() out
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217070047.953-9-ville.syrjala@linux.intel.com
Most of MMIO accesses from intel_display_irq.c are currently done via
uncore_*() functions instead of the display-specific ones, namely
intel_de_*(). Because of that, DMC wakelock ends up being ignored and
some invalid MMIO accesses are performed while display is in dynamic DC
states. Thus, update the display IRQ code to use the intel_de_*() MMIO
functions.
After this change, we are left with some IRQ-specific functions that
still use the unwrapped uncore_*() functions (i.e. gen2_irq_init,
gen3_irq_reset and gen2_assert_iir_is_zero). We will deal with them in
an upcoming change.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113204306.112266-2-gustavo.sousa@intel.com
From LNL onwards there is a new hardware feature, which
allows to detect if the driver wrongly allocated DBuf
entries and they happen to overlap. If enabled this will
cause a specific interrupt to occur.
We now handle it in the driver, by writing correspondent
error message to kernel log.
v2: Initialize dbuf overlap flag in runtime_defaults (Jani Nikula)
v3: Unmask the overlap detection interrupt (Uma)
v4: use display over i915 (Jani Nikula)
v5: Use display instead of dev_priv (Jani Nikula)
v6: rebased to resolve merge conflicts
Bspec: 69450, 69464
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030103319.207235-1-vinod.govindapillai@intel.com
Underrun recovery was defeatured and was never brought into usage.
Thus we can remove the underrun recovery interrupt/reporting
register bits and related logic introduced to detect/report soft,
hard, port underruns.
Essentially this is a revert of the commit 8bcc0840cf
("drm/i915/xelpd: Enhanced pipe underrun reporting") which originally
added this functionality. Also note that PIPE_STATUS_UNDERRUN bit in
PIPESTATUS still stays relevant but we would move back to not
clearing this sticky bit as we are not using any information from
this register.
v2: Extend commit message to add more details (Matt Roper)
v3: Fix the old commit mention in commit message
Signed-off-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241015080503.3521063-1-sai.teja.pottumuttu@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Turns out CRC interrupts also fail to wake up i915gm/i945gm from
C2+. I suppose this is a generic problem, but for most other
interrupts the system will be busy enough already prior to
the irq being issued. But CRC interrupts are like vblank interrupts
and only fire once per frame, so plenty of time to fall asleep
in between them.
Apply the same core clock gating trick to CRC interrupts
that we use for vblank interrupts.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241001195803.3371-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
