The fbnic driver was presenting with the following locking assert coming
out of a PM resume:
[ 42.208116][ T164] RTNL: assertion failed at drivers/net/phy/phylink.c (2611)
[ 42.208492][ T164] WARNING: CPU: 1 PID: 164 at drivers/net/phy/phylink.c:2611 phylink_resume+0x190/0x1e0
[ 42.208872][ T164] Modules linked in:
[ 42.209140][ T164] CPU: 1 UID: 0 PID: 164 Comm: bash Not tainted 6.17.0-rc2-virtme #134 PREEMPT(full)
[ 42.209496][ T164] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014
[ 42.209861][ T164] RIP: 0010:phylink_resume+0x190/0x1e0
[ 42.210057][ T164] Code: 83 e5 01 0f 85 b0 fe ff ff c6 05 1c cd 3e 02 01 90 ba 33 0a 00 00 48 c7 c6 20 3a 1d a5 48 c7 c7 e0 3e 1d a5 e8 21 b8 90 fe 90 <0f> 0b 90 90 e9 86 fe ff ff e8 42 ea 1f ff e9 e2 fe ff ff 48 89 ef
[ 42.210708][ T164] RSP: 0018:ffffc90000affbd8 EFLAGS: 00010296
[ 42.210983][ T164] RAX: 0000000000000000 RBX: ffff8880078d8400 RCX: 0000000000000000
[ 42.211235][ T164] RDX: 0000000000000000 RSI: 1ffffffff4f10938 RDI: 0000000000000001
[ 42.211466][ T164] RBP: 0000000000000000 R08: ffffffffa2ae79ea R09: fffffbfff4b3eb84
[ 42.211707][ T164] R10: 0000000000000003 R11: 0000000000000000 R12: ffff888007ad8000
[ 42.211997][ T164] R13: 0000000000000002 R14: ffff888006a18800 R15: ffffffffa34c59e0
[ 42.212234][ T164] FS: 00007f0dc8e39740(0000) GS:ffff88808f51f000(0000) knlGS:0000000000000000
[ 42.212505][ T164] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 42.212704][ T164] CR2: 00007f0dc8e9fe10 CR3: 000000000b56d003 CR4: 0000000000772ef0
[ 42.213227][ T164] PKRU: 55555554
[ 42.213366][ T164] Call Trace:
[ 42.213483][ T164] <TASK>
[ 42.213565][ T164] __fbnic_pm_attach.isra.0+0x8e/0xa0
[ 42.213725][ T164] pci_reset_function+0x116/0x1d0
[ 42.213895][ T164] reset_store+0xa0/0x100
[ 42.214025][ T164] ? pci_dev_reset_attr_is_visible+0x50/0x50
[ 42.214221][ T164] ? sysfs_file_kobj+0xc1/0x1e0
[ 42.214374][ T164] ? sysfs_kf_write+0x65/0x160
[ 42.214526][ T164] kernfs_fop_write_iter+0x2f8/0x4c0
[ 42.214677][ T164] ? kernfs_vma_page_mkwrite+0x1f0/0x1f0
[ 42.214836][ T164] new_sync_write+0x308/0x6f0
[ 42.214987][ T164] ? __lock_acquire+0x34c/0x740
[ 42.215135][ T164] ? new_sync_read+0x6f0/0x6f0
[ 42.215288][ T164] ? lock_acquire.part.0+0xbc/0x260
[ 42.215440][ T164] ? ksys_write+0xff/0x200
[ 42.215590][ T164] ? perf_trace_sched_switch+0x6d0/0x6d0
[ 42.215742][ T164] vfs_write+0x65e/0xbb0
[ 42.215876][ T164] ksys_write+0xff/0x200
[ 42.215994][ T164] ? __ia32_sys_read+0xc0/0xc0
[ 42.216141][ T164] ? do_user_addr_fault+0x269/0x9f0
[ 42.216292][ T164] ? rcu_is_watching+0x15/0xd0
[ 42.216442][ T164] do_syscall_64+0xbb/0x360
[ 42.216591][ T164] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 42.216784][ T164] RIP: 0033:0x7f0dc8ea9986
A bit of digging showed that we were invoking the phylink_resume as a part
of the fbnic_up path when we were enabling the service task while not
holding the RTNL lock. We should be enabling this sooner as a part of the
ndo_open path and then just letting the service task come online later.
This will help to enforce the correct locking and brings the phylink
interface online at the same time as the network interface, instead of at a
later time.
I tested this on QEMU to verify this was working by putting the system to
sleep using "echo mem > /sys/power/state" to put the system to sleep in the
guest and then using the command "system_wakeup" in the QEMU monitor.
Fixes: 69684376ee ("eth: fbnic: Add link detection")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/175616257316.1963577.12238158800417771119.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The exception handling path for the __fbnic_pm_resume function had a bug in
that it was taking the devlink lock and then exiting to exception handling
instead of waiting until after it released the lock to do so. In order to
handle that I am swapping the placement of the unlock and the exception
handling jump to label so that we don't trigger a deadlock by holding the
lock longer than we need to.
In addition this change applies the same ordering to the rtnl_lock/unlock
calls in the same function as it should make the code easier to follow if
it adheres to a consistent pattern.
Fixes: 82534f446d ("eth: fbnic: Add devlink dev flash support")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/175616256667.1963577.5543500806256052549.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex added page bias of LONG_MAX, which is admittedly quite
a clever way of catching overflows of the pp ref count.
The page pool code was "optimized" to leave the ref at 1
for freed pages so it can't catch basic bugs by itself any more.
(Something we should probably address under DEBUG_NET...)
Unfortunately for fbnic since commit f7dc3248dc ("skbuff: Optimization
of SKB coalescing for page pool") core _may_ actually take two extra
pp refcounts, if one of them is returned before driver gives up the bias
the ret < 0 check in page_pool_unref_netmem() will trigger.
While at it add a FBNIC_ to the name of the driver constant.
Fixes: 0cb4c0a137 ("eth: fbnic: Implement Rx queue alloc/start/stop/free")
Link: https://patch.msgid.link/20250801170754.2439577-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CI hit a UaF in fbnic in the AF_XDP portion of the queues.py test.
The UaF is in the __sk_mark_napi_id_once() call in xsk_bind(),
NAPI has been freed. Looks like the device failed to open earlier,
and we lack clearing the NAPI pointer from the queue.
Fixes: 557d02238e ("eth: fbnic: centralize the queue count and NAPI<>queue setting")
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250728163129.117360-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
UBSAN complains that we reach beyond the end of the log entry:
UBSAN: array-index-out-of-bounds in drivers/net/ethernet/meta/fbnic/fbnic_fw_log.c:94:50
index 71 is out of range for type 'char [*]'
Call Trace:
<TASK>
ubsan_epilogue+0x5/0x2b
fbnic_fw_log_write+0x120/0x960
fbnic_fw_parse_logs+0x161/0x210
We're just taking the address of the character after the array,
so this really seems like something that should be legal.
But whatever, easy enough to silence by doing direct pointer math.
Fixes: c2b93d6bec ("eth: fbnic: Create ring buffer for firmware logs")
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250709205910.3107691-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The firmware log buffer is enabled during probe and freed during remove.
Early versions of firmware do not support sending logs. Once the mailbox is
up driver will enable logging when supported firmware versions are detected.
Logging is disabled before the mailbox is freed.
Signed-off-by: Lee Trager <lee@trager.us>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250702192207.697368-6-lee@trager.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By default firmware will not send logs to the host. This must be explicitly
enabled by the driver. The mailbox has the concept of a flag which is a u32
used as a boolean. Lack of flag defaults to a value of false. When enabling
logging historical logs may be optionally requested. These are log messages
generated by the NIC before the driver was loaded. The driver also sends a
log version to support changing the logging format in the future.
[SEND_LOGS_REQ] = {
[SEND_LOGS] /* flag to request log reporting */
[SEND_LOGS_HISTORY] /* flag to request historical logs */
[SEND_LOGS_VERSION] /* u32 indicating the log format version */
}
Logs may be sent to the user either one at a time, or when historical logs
are requested in bulk. Firmware may not send more than 14 messages in bulk
to prevent flooding the mailbox.
[LOG_MSG] = {
[LOG_INDEX] /* entry 0 - u64 index of log */
[LOG_MSEC] /* entry 0 - u32 timestamp of log */
[LOG_MSG] /* entry 0 - char log message up to 256 */
[LOG_LENGTH] /* u32 of remaining log items in arrays */
[LOG_INDEX_ARRAY] = {
[LOG_INDEX] /* entry 1 - u64 index of log */
[LOG_INDEX] /* entry 2 - u64 index of log */
...
}
[LOG_MSEC_ARRAY] = {
[LOG_MSEC] /* entry 1 - u32 timestamp of log */
[LOG_MSEC] /* entry 2 - u32 timestamp of log */
...
}
[LOG_MSG_ARRAY] = {
[LOG_MSG] /* entry 1 - char log message up to 256 */
[LOG_MSG] /* entry 2 - char log message up to 256 */
...
}
}
Signed-off-by: Lee Trager <lee@trager.us>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250702192207.697368-5-lee@trager.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The full minimum version is 0.10.6-0. The six is now correctly defined as
patch and shifted appropriately. 0.10.6-0 is a preproduction version of
firmware which was released over a year and a half ago. All production
devices meet this requirement.
Signed-off-by: Lee Trager <lee@trager.us>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250702192207.697368-2-lee@trager.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fbnic_fw_clear_cmpl() does the inverse of fbnic_mbx_set_cmpl().
It removes the completion from the mailbox table.
It also calls fbnic_mbx_set_cmpl_slot() internally.
It should have fbnic_mbx prefix, not fbnic_fw.
I'm not very clear on what the distinction is between the two
prefixes but the matching "set" and "clear" functions should
use the same prefix.
While at it move the "clear" function closer to the "set".
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250624142834.3275164-6-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This change adds some basic support for reporting the current link config
to the user via ethtool. Currently the main components reported are the
carrier status, link speed, and FEC.
For now we are handling the FEC directly as phylink doesn't have support
for it. The plan is to work on incorporating FEC support into phylink and
eventually adding the ability for us to set the FEC configuration through
phylink itself.
In addition as we don't yet have SFP or PHY support the listed modes
supported are including ones not supported by the media we are attached to.
That will hopefully be addressed once we can get the QSFP modules
supported.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/175028448275.625704.60592644122010798.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The fbnic driver was using the XLGMII link mode to enable phylink, however
that mode wasn't the correct one to use as the NIC doesn't actually use
XLGMII, it is using a combinations of 25G, 50G, and 100G interface modes
and configuring those via pins exposed on the PCS, MAC, and PHY interfaces.
To more accurately reflect that we should drop the uxe of XGMII and XLGMII
and instead use the correct interface types.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/175028447568.625704.17971496887030109107.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There were several issues in the way we were handling the link info coming
from firmware.
First is the fact that we were carrying around "AUTO" flags to indicate
that we needed to populate the values. We can just drop this and assume
that we will always be populating the settings from firmware. With this we
can also clean up the masking as the "AUTO" flags were just there to be
stripped anyway.
Second since we are getting rid of the "AUTO" setting we still need a way
to report that the link is not configured. We convert the link_mode "AUTO"
to "UNKNOWN" to do this. With this we can avoid reporting link up in the
phylink_pcs_get_state call as we will just set link to 0 and return without
updating the link speed. This is preferred versus the driver just forcing
50G which makes it harder to recover when the FW does start providing valid
settings.
With this the plan is to eventually replace the link_mode we use with the
interface_mode from phylink for all intents and purposes and have the two
be interchangeable. At that point we can convert the FW provided settings
over to something closer to link partner settings and give phylink greater
control of the interface allowing for user override of the settings and an
asynchronous setup of the link versus having to pull early settings from
firmware.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/175028445548.625704.1367708155813490215.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In order for us to make use of the information in the PHY we need to verify
that the FW capabilities message has been processed. To do so we should
poll until the FW version in the capabilities message is at least at the
minimum level needed to verify that the FW can support the basic PHY config
messages.
As such this change adds logic so that we will poll the mailbox until such
time as the FW version can be populated with an acceptable value. If it
doesn't reach a sufficicient value the mailbox will be considered to have
timed out.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/175028444873.625704.10269838393153693403.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add three new mailbox messages to support PLDM upgrades:
* FW_START_UPGRADE - Enables driver to request starting a firmware upgrade
by specifying the component to be upgraded and its
size.
* WRITE_CHUNK - Allows firmware to request driver to send a chunk of
data at the specified offset.
* FINISH_UPGRADE - Allows firmware to cancel the upgrade process and
return an error.
Signed-off-by: Lee Trager <lee@trager.us>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250512190109.2475614-5-lee@trager.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
fbnic supports applying firmware which may not be rolled back. This is
implemented in firmware however it is useful for the driver to know the
minimum supported firmware version. This will enable the driver validate
new firmware before it is sent to the NIC. If it is too old the driver can
provide a clear message that the version is too old.
Signed-off-by: Lee Trager <lee@trager.us>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250512190109.2475614-3-lee@trager.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We had originally thought to have the mailbox go to ready in the background
while we were doing other things. One issue with this though is that we
can't disable it by clearing the ready state without also blocking
interrupts or calls to mbx_poll as it will just pop back to life during an
interrupt.
In order to prevent that from happening we can pull the code for toggling
to ready out of the interrupt path and instead place it in the
fbnic_mbx_poll_tx_ready path so that it becomes the only spot where the
Rx/Tx can toggle to the ready state. By doing this we can prevent races
where we disable the DMA and/or free buffers only to have an interrupt fire
and undo what we have done.
Fixes: da3cde0820 ("eth: fbnic: Add FW communication mechanism")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654722518.499179.11612865740376848478.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There were a couple different issues found in fbnic_mbx_poll_tx_ready.
Among them were the fact that we were sleeping much longer than we actually
needed to as the actual FW could respond in under 20ms. The other issue was
that we would just keep polling the mailbox even if the device itself had
gone away.
To address the responsiveness issues we can decrease the sleeps to 20ms and
use a jiffies based timeout value rather than just counting the number of
times we slept and then polled.
To address the hardware going away we can move the check for the firmware
BAR being present from where it was and place it inside the loop after the
mailbox descriptor ring is initialized and before we sleep so that we just
abort and return an error if the device went away during initialization.
With these two changes we see a significant improvement in boot times for
the driver.
Fixes: da3cde0820 ("eth: fbnic: Add FW communication mechanism")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654721224.499179.2698616208976624755.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There was an issue in that if we were to shutdown we could be left with
a completion in flight as the mailbox went away. To address that I have
added an fbnic_mbx_evict_all_cmpl function that is meant to essentially
create a "broken pipe" type response so that all callers will receive an
error indicating that the connection has been broken as a result of us
shutting down the mailbox.
Fixes: 378e5cc1c6 ("eth: fbnic: hwmon: Add completion infrastructure for firmware requests")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654720578.499179.380252598204530873.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The fbnic_mbx_flush_tx function had a number of issues.
First, we were waiting 200ms for the firmware to process the packets. We
can drop this to 20ms and in almost all cases this should be more than
enough time. So by changing this we can significantly reduce shutdown time.
Second, we were not making sure that the Tx path was actually shut off. As
such we could still have packets added while we were flushing the mailbox.
To prevent that we can now clear the ready flag for the Tx side and it
should stay down since the interrupt is disabled.
Third, we kept re-reading the tail due to the second issue. The tail should
not move after we have started the flush so we can just read it once while
we are holding the mailbox Tx lock. By doing that we are guaranteed that
the value should be consistent.
Fourth, we were keeping a count of descriptors cleaned due to the second
and third issues called out. That count is not a valid reason to be exiting
the cleanup, and with the tail only being read once we shouldn't see any
cases where the tail moves after the disable so the tracking of count can
be dropped.
Fifth, we were using attempts * sleep time to determine how long we would
wait in our polling loop to flush out the Tx. This can be very imprecise.
In order to tighten up the timing we are shifting over to using a jiffies
value of jiffies + 10 * HZ + 1 to determine the jiffies value we should
stop polling at as this should be accurate within once sleep cycle for the
total amount of time spent polling.
Fixes: da3cde0820 ("eth: fbnic: Add FW communication mechanism")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654719929.499179.16406653096197423749.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We have two issues that need to be addressed in our IRQ handling.
One is the fact that we can end up double-freeing IRQs in the event of an
exception handling error such as a PCIe reset/recovery that fails. To
prevent that from becoming an issue we can use the msix_vector values to
indicate that we have successfully requested/freed the IRQ by only setting
or clearing them when we have completed the given action.
The other issue is that we have several potential races in our IRQ path due
to us manipulating the mask before the vector has been truly disabled. In
order to handle that in the case of the FW mailbox we need to not
auto-enable the IRQ and instead will be enabling/disabling it separately.
In the case of the PCS vector we can mitigate this by unmapping it and
synchronizing the IRQ before we clear the mask.
The general order of operations after this change is now to request the
interrupt, poll the FW mailbox to ready, and then enable the interrupt. For
the shutdown we do the reverse where we disable the interrupt, flush any
pending Tx, and then free the IRQ. I am renaming the enable/disable to
request/free to be equivilent with the IRQ calls being used. We may see
additions in the future to enable/disable the IRQs versus request/free them
for certain use cases.
Fixes: da3cde0820 ("eth: fbnic: Add FW communication mechanism")
Fixes: 69684376ee ("eth: fbnic: Add link detection")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654719271.499179.3634535105127848325.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In order to prevent the device from throwing spurious writes and/or reads
at us we need to gate the AXI fabric interface to the PCIe until such time
as we know the FW is in a known good state.
To accomplish this we use the mailbox as a mechanism for us to recognize
that the FW has acknowledged our presence and is no longer sending any
stale message data to us.
We start in fbnic_mbx_init by calling fbnic_mbx_reset_desc_ring function,
disabling the DMA in both directions, and then invalidating all the
descriptors in each ring.
We then poll the mailbox in fbnic_mbx_poll_tx_ready and when the interrupt
is set by the FW we pick it up and mark the mailboxes as ready, while also
enabling the DMA.
Once we have completed all the transactions and need to shut down we call
into fbnic_mbx_clean which will in turn call fbnic_mbx_reset_desc_ring for
each ring and shut down the DMA and once again invalidate the descriptors.
Fixes: 3646153161 ("eth: fbnic: Add register init to set PCIe/Ethernet device config")
Fixes: da3cde0820 ("eth: fbnic: Add FW communication mechanism")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654718623.499179.7445197308109347982.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Address to issues with the FW mailbox descriptor initialization.
We need to reverse the order of accesses when we invalidate an entry versus
writing an entry. When writing an entry we write upper and then lower as
the lower 32b contain the valid bit that makes the entire address valid.
However for invalidation we should write it in the reverse order so that
the upper is marked invalid before we update it.
Without this change we may see FW attempt to access pages with the upper
32b of the address set to 0 which will likely result in DMAR faults due to
write access failures on mailbox shutdown.
Fixes: da3cde0820 ("eth: fbnic: Add FW communication mechanism")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654717972.499179.8083789731819297034.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch add coverage for TMI stats including PTP stats and drop
stats.
PTP stats include illegal requests, bad timestamp and good timestamps.
The bad timestamp and illegal request counters are reported under as
`error` via `ethtool -T` Both these counters are individually being
reported via `ethtool -S`
The good timestamp stats are being reported as `pkts` via `ethtool -T`
ethtool -S eth0 | grep "ptp"
ptp_illegal_req: 0
ptp_good_ts: 0
ptp_bad_ts: 0
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410070859.4160768-5-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch provides coverage to the RXB (RX Buffer) stats. RXB stats
are divided into 3 sections: RXB enqueue, RXB FIFO, and RXB dequeue
stats.
The RXB enqueue/dequeue stats are indexed from 0-3 and cater for the
input/output counters whereas, the RXB fifo stats are indexed from 0-7.
The RXB also supports pause frame stats counters which we are leaving
for a later patch.
ethtool -S eth0 | grep rxb
rxb_integrity_err0: 0
rxb_mac_err0: 0
rxb_parser_err0: 0
rxb_frm_err0: 0
rxb_drbo0_frames: 1433543
rxb_drbo0_bytes: 775949081
---
---
rxb_intf3_frames: 1195711
rxb_intf3_bytes: 739650210
rxb_pbuf3_frames: 1195711
rxb_pbuf3_bytes: 765948092
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410070859.4160768-4-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch provides support for hardware queue stats and covers
packet errors for RX-DMA engine, RCQ drops and BDQ drops.
The packet errors are also aggregated with the `rx_errors` stats in the
`rtnl_link_stats` as well as with the `hw_drops` in the queue API.
The RCQ and BDQ drops are aggregated with `rx_over_errors` in the
`rtnl_link_stats` as well as with the `hw_drop_overruns` in the queue API.
ethtool -S eth0 | grep -E 'rde'
rde_0_pkt_err: 0
rde_0_pkt_cq_drop: 0
rde_0_pkt_bdq_drop: 0
---
---
rde_127_pkt_err: 0
rde_127_pkt_cq_drop: 0
rde_127_pkt_bdq_drop: 0
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410070859.4160768-3-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch adds lock protection for the hardware statistics for fbnic.
The hardware statistics access via ndo_get_stats64 is not protected by
the rtnl_lock(). Since these stats can be accessed from different places
in the code such as service task, ethtool, Q-API, and net_device_ops, a
lock-less approach can lead to races.
Note that this patch is not a fix rather, just a prep for the subsequent
changes in this series.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410070859.4160768-2-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
