When building on ARCH=um (which does not set HAS_IOMEM), kconfig
reports an unmet dependency caused by PINCTRL_STMFX. It selects
MFD_STMFX, which depends on HAS_IOMEM. To stop this warning,
PINCTRL_STMFX should also depend on HAS_IOMEM.
kconfig warning:
WARNING: unmet direct dependencies detected for MFD_STMFX
Depends on [n]: HAS_IOMEM [=n] && I2C [=y] && OF [=y]
Selected by [y]:
- PINCTRL_STMFX [=y] && PINCTRL [=y] && I2C [=y] && OF_GPIO [=y]
Fixes: 1490d9f841 ("pinctrl: Add STMFX GPIO expander Pinctrl/GPIO driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/20250815022721.1650885-1-rdunlap@infradead.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Pull pin control updates from Linus Walleij:
"Nothing stands out, apart from maybe the interesting Eswin EIC7700, a
RISC-V SoC I've never seen before.
Core changes:
- Open code PINCTRL_FUNCTION_DESC() instead of defining a complex
macro only used in one place
- Add pinmux_generic_add_pinfunction() helper and use this in a few
drivers
New drivers:
- Amlogic S7, S7D and S6 pin control support
- Eswin EIC7700 pin control support
- Qualcomm PMIV0104, PM7550 and Milos pin control support
Because of unhelpful numbering schemes, the Qualcomm driver now
needs to start to rely on SoC codenames
- STM32 HDP pin control support
- Mediatek MT8189 pin control support
Improvements:
- Switch remaining pin control drivers over to the new GPIO set
callback that provides a return value
- Support RSVD (reserved) pins in the STM32 driver
- Move many fixed assignments over to pinctrl_desc definitions
- Handle multiple TLMM regions in the Qualcomm driver"
* tag 'pinctrl-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits)
pinctrl: mediatek: Add pinctrl driver for mt8189
dt-bindings: pinctrl: mediatek: Add support for mt8189
pinctrl: aspeed-g6: Add PCIe RC PERST pin group
pinctrl: ingenic: use pinmux_generic_add_pinfunction()
pinctrl: keembay: use pinmux_generic_add_pinfunction()
pinctrl: mediatek: moore: use pinmux_generic_add_pinfunction()
pinctrl: airoha: use pinmux_generic_add_pinfunction()
pinctrl: equilibrium: use pinmux_generic_add_pinfunction()
pinctrl: provide pinmux_generic_add_pinfunction()
pinctrl: pinmux: open-code PINCTRL_FUNCTION_DESC()
pinctrl: ma35: use new GPIO line value setter callbacks
MAINTAINERS: add Clément Le Goffic as STM32 HDP maintainer
pinctrl: stm32: Introduce HDP driver
dt-bindings: pinctrl: stm32: Introduce HDP
pinctrl: qcom: Add Milos pinctrl driver
dt-bindings: pinctrl: document the Milos Top Level Mode Multiplexer
pinctrl: qcom: spmi: Add PM7550
dt-bindings: pinctrl: qcom,pmic-gpio: Add PM7550 support
pinctrl: qcom: spmi: Add PMIV0104
dt-bindings: pinctrl: qcom,pmic-gpio: Add PMIV0104 support
...
The zynq driver can be enabled for compile-testing on builds without
CONFIG_OF, leading to a link error:
ld.lld-21: error: undefined symbol: pinconf_generic_dt_node_to_map
referenced by pinconf-generic.h:231 (/home/arnd/arm-soc/include/linux/pinctrl/pinconf-generic.h:231)
drivers/pinctrl/pinctrl-zynq.o:(pinconf_generic_dt_node_to_map_all) in archive vmlinux.a
Prevent this with the proper compile time dependency.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506212021.deAhuaWr-lkp@intel.com/
Fixes: 1982621dec ("pinctrl: Allow compile testing for K210, TB10X and ZYNQ")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/20250620130814.2580678-1-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When compile-testing without CONfIG_OF:
drivers/pinctrl/pinctrl-th1520.c: In function 'th1520_pinctrl_dt_node_to_map':
drivers/pinctrl/pinctrl-th1520.c:455:23: error: implicit declaration of function 'pinconf_generic_parse_dt_config'; did you mean 'pinconf_generic_dump_config'? [-Wimplicit-function-declaration]
455 | ret = pinconf_generic_parse_dt_config(child, pctldev, &configs, &nconfigs);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| pinconf_generic_dump_config
Enforce this using Kconig dependencies.
Fixes: bed5cd6f8a ("pinctrl: Add driver for the T-Head TH1520 SoC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Drew Fustini <drew@pdp7.com>
Link: https://lore.kernel.org/20241015151126.2401855-1-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Configuration of the K230 is similar to that of the K210. However, in
K210, the 256 functions for each pin are shared, whereas in K230,
multiplex functions are different for every pin.
`drv_data` of `pinctrl_pin_desc` is pointing to currently activated
group, which is used to print the name of current function of pin in
`pin_dbg_show` and will be updated in `set_mux`, so they are not set
const.
Signed-off-by: Ze Huang <18771902331@163.com>
Link: https://lore.kernel.org/20240926-k230-pinctrl-v2-2-a9a36fba4b34@163.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
RISC-V SoC Kconfig Updates for v6.10
A few different bits of SoC-related Kconfig work. The first part of
this is shared with the DT updates - the modification of all SOC_CANAAN
users to SOC_CANAAN_K210 to split the existing m-mode nommu k210 away
from the k230 that is able to be used in a "common" kernel.
The other thing here is the removal of most of the SOC_VENDOR options,
with their ARCH_VENDOR equivalents that've been waiting in the wings for
1 year+ now made visible. Due a lapse on my part when originally adding
the ARCH_VENDOR stuff, the Microchip transition isn't complete - the
_POLARFIRE was a mistake to keep as there's gonna be non-PolarFire
RISC-V stuff from Microchip soonTM.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-config-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: config: enable ARCH_CANAAN in defconfig
RISC-V: drop SOC_VIRT for ARCH_VIRT
RISC-V: drop SOC_SIFIVE for ARCH_SIFIVE
RISC-V: drop SOC_MICROCHIP_POLARFIRE for ARCH_MICROCHIP
RISC-V: Drop unused SOC_CANAAN
reset: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
pinctrl: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
clk: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
soc: canaan: Deprecate SOC_CANAAN and use SOC_CANAAN_K210 for K210
riscv: Kconfig.socs: Split ARCH_CANAAN and SOC_CANAAN_K210
Link: https://lore.kernel.org/r/20240503-mardi-underling-3d81a9f97329@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Awinic AW9523(B) is a multi-function I2C gpio expander in a
TQFN-24L package, featuring PWM (max 37mA per pin, or total max
power 3.2Watts) for LED driving capability.
It has two ports with 8 pins per port (for a total of 16 pins),
configurable as either PWM with 1/256 stepping or GPIO input/output,
1.8V logic input; each GPIO can be configured as input or output
independently from each other.
This IC also has an internal interrupt controller, which is capable
of generating an interrupt for each GPIO, depending on the
configuration, and will raise an interrupt on the INTN pin to
advertise this to an external interrupt controller.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: David Bauer <mail@david-bauer.net>
Link: https://lore.kernel.org/r/20210624214458.68716-2-mail@david-bauer.net
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240301-awinic-aw9523-v8-1-7ec572f5dfb4@linaro.org
The Lantiq PEF2256 is a framer and line interface component designed to
fulfill all required interfacing between an analog E1/T1/J1 line and the
digital PCM system highway/H.100 bus.
This kind of component can be found in old telecommunication system.
It was used to digital transmission of many simultaneous telephone calls
by time-division multiplexing. Also using HDLC protocol, WAN networks
can be reached through the framer.
This pinmux support handles the pin muxing part (pins RP(A..D) and pins
XP(A..D)) of the PEF2256.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231128132534.258459-5-herve.codina@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Pull pin control updates from Linus Walleij:
"No core changes this time
New drivers:
- Tegra234 support
- Qualcomm IPQ5018 support
- Intel Meteor Lake-S support
- Qualcomm SDX75 subdriver
- Qualcomm SPMI-based PM8953 support
Improvements:
- Fix up support for GPIO3 on the AXP209
- Push-pull drive configuration support for the AT91 PIO4
- Fix misc non-urgent bugs in the AMD driver
- Misc non-urgent improved error handling
- Misc janitorial and minor improvements"
* tag 'pinctrl-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits)
pinctrl: cherryview: Drop goto label
pinctrl: baytrail: invert if condition
pinctrl: baytrail: add warning for BYT_VAL_REG retrieval failure
pinctrl: baytrail: reduce scope of spinlock in ->dbg_show() hook
pinctrl: tegra: avoid duplicate field initializers
dt-bindings: pinctrl: qcom,sdx65-tlmm: add pcie_clkreq function
pinctrl: mlxbf3: remove broken Kconfig 'select'
pinctrl: spear: Remove unused of_gpio.h inclusion
pinctrl: lantiq: Remove unused of_gpio.h inclusion
pinctrl: at91-pio4: check return value of devm_kasprintf()
pinctrl: microchip-sgpio: check return value of devm_kasprintf()
pinctrl: freescale: Fix a memory out of bounds when num_configs is 1
pinctrl: intel: refine ->irq_set_type() hook
pinctrl: intel: refine ->set_mux() hook
pinctrl: baytrail: Use str_hi_lo() helper
lib/string_choices: Add str_high_low() helper
lib/string_helpers: Split out string_choices.h
lib/string_helpers: Add missing header files to MAINTAINERS database
pinctrl: npcm7xx: Add missing check for ioremap
pinctrl:sunplus: Add check for kmalloc
...
The new pinctrl driver selects GPIO_MLXBF3, but that can not be enabled yet because
the MELLANOX_PLATFORM symbol does not exist in the tree:
WARNING: unmet direct dependencies detected for GPIO_MLXBF3
Depends on [n]: GPIOLIB [=y] && PCI [=n] && (MELLANOX_PLATFORM [=n] && ARM64 [=y] || COMPILE_TEST [=y])
Selected by [y]:
- PINCTRL_MLXBF3 [=y] && PINCTRL [=y] && (MELLANOX_PLATFORM [=n] && ARM64 [=y] || COMPILE_TEST [=y])
As it turns out, the pinctlr driver still builds fine without this, so just
remove the select statement.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230619082104.699331-1-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If CONFIG_PINCTRL_LOONGSON2=y and CONFIG_OF is not set,
gcc complained about undefined reference:
drivers/pinctrl/pinctrl-loongson2.o: In function `pinconf_generic_dt_node_to_map_all':
pinctrl-loongson2.c:(.text+0x1c4): undefined reference to
`pinconf_generic_dt_node_to_map'
To fix this error, add depends on OF to
config PINCTRL_LOONGSON2.
Fixes: f73f88acbc ("pinctrl: pinctrl-loongson2: add pinctrl driver support")
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Link: https://lore.kernel.org/r/20221121132608.230645-1-renzhijie2@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Pull pin control updates from Linus Walleij:
"There is nothing exciting going on, no core changes, just a few
drivers and cleanups.
New drivers:
- Cypress CY8C95x0 chip pin control support, along with an immediate
cleanup
- Mediatek MT8188 SoC pin control support
- Qualcomm SM8450 and SC8280XP LPASS (low power audio subsystem) pin
control support
- Qualcomm PM7250, PM8450
- Rockchip RV1126 SoC pin control support
Improvements:
- Fix some missing pins in the Armada 37xx driver
- Convert Broadcom and Nomadik drivers to use PINCTRL_PINGROUP()
macro
- Fix some GPIO irq_chips to be immutable
- Massive Qualcomm device tree binding cleanup, with more to come"
* tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (119 commits)
MAINTAINERS: adjust STARFIVE JH7100 PINCTRL DRIVER after file movement
pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100"
pinctrl: Create subdirectory for StarFive drivers
dt-bindings: pinctrl: st,stm32: Document interrupt-controller property
dt-bindings: pinctrl: st,stm32: Document gpio-hog pattern property
dt-bindings: pinctrl: st,stm32: Document gpio-line-names
pinctrl: st: stop abusing of_get_named_gpio()
pinctrl: wpcm450: Correct the fwnode_irq_get() return value check
pinctrl: bcm: Remove unused struct bcm6328_pingroup
pinctrl: qcom: restrict drivers per ARM/ARM64
pinctrl: bcm: ns: Remove redundant dev_err call
gpio: rockchip: request GPIO mux to pinctrl when setting direction
pinctrl: rockchip: add pinmux_ops.gpio_set_direction callback
pinctrl: cy8c95x0: Align function names in cy8c95x0_pmxops
pinctrl: cy8c95x0: Drop atomicity on operations on push_pull
pinctrl: cy8c95x0: Lock register accesses in cy8c95x0_set_mux()
pinctrl: sunxi: sun50i-h5: Switch to use dev_err_probe() helper
pinctrl: stm32: Switch to use dev_err_probe() helper
dt-bindings: qcom-pmic-gpio: Add PM7250B and PM8450 bindings
pinctrl: qcom: spmi-gpio: Add compatible for PM7250B
...
Pull pin control updates from Linus Walleij:
"Outside the pinctrl driver and DT bindings we hit some Arm DT files,
patched by the maintainers.
Other than that it is business as usual.
Core changes:
- Add PINCTRL_PINGROUP() helper macro (and use it in the AMD driver).
New drivers:
- Intel Meteor Lake support.
- Reneasas RZ/V2M and r8a779g0 (R-Car V4H).
- AXP209 variants AXP221, AXP223 and AXP809.
- Qualcomm MSM8909, PM8226, PMP8074 and SM6375.
- Allwinner D1.
Improvements:
- Proper pin multiplexing in the AMD driver.
- Mediatek MT8192 can use generic drive strength and pin bias, then
fixes on top plus some I2C pin group fixes.
- Have the Allwinner Sunplus SP7021 use the generic DT schema and
make interrupts optional.
- Handle Qualcomm SC7280 ADSP.
- Handle Qualcomm MSM8916 CAMSS GP clock muxing.
- High impedance bias on ZynqMP.
- Serialize StarFive access to MMIO.
- Immutable gpiochip for BCM2835, Ingenic, Qualcomm SPMI GPIO"
* tag 'pinctrl-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (117 commits)
dt-bindings: pinctrl: qcom,pmic-gpio: add PM8226 constraints
pinctrl: qcom: Make PINCTRL_SM8450 depend on PINCTRL_MSM
pinctrl: qcom: sm8250: Fix PDC map
pinctrl: amd: Fix an unused variable
dt-bindings: pinctrl: mt8186: Add and use drive-strength-microamp
dt-bindings: pinctrl: mt8186: Add gpio-line-names property
ARM: dts: imxrt1170-pinfunc: Add pinctrl binding header
pinctrl: amd: Use unicode for debugfs output
pinctrl: amd: Fix newline declaration in debugfs output
pinctrl: at91: Fix typo 'the the' in comment
dt-bindings: pinctrl: st,stm32: Correct 'resets' property name
pinctrl: mvebu: Missing a blank line after declarations.
pinctrl: qcom: Add SM6375 TLMM driver
dt-bindings: pinctrl: Add DT schema for SM6375 TLMM
dt-bindings: pinctrl: mt8195: Use drive-strength-microamp in examples
Revert "pinctrl: qcom: spmi-gpio: make the irqchip immutable"
pinctrl: imx93: Add MODULE_DEVICE_TABLE()
pinctrl: sunxi: Add driver for Allwinner D1
pinctrl: sunxi: Make some layout parameters dynamic
pinctrl: sunxi: Refactor register/offset calculation
...
It was observed that by allowing pinctrl_amd to be loaded
later in the boot process that interrupts sent to the GPIO
controller early in the boot are not serviced. The kernel treats
these as a spurious IRQ and disables the IRQ.
This problem was exacerbated because it happened on a system with
an encrypted partition so the kernel object was not accesssible for
an extended period of time while waiting for a passphrase.
To avoid this situation from occurring, stop allowing pinctrl-amd
from being built as a module and instead require it to be built-in
or disabled.
Reported-by: madcatx@atlas.cz
Suggested-by: jwrdegoede@fedoraproject.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216230
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220713175950.964-1-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
