KVM selftests changes for 6.17
- Fix a comment typo.
- Verify KVM is loaded when getting any KVM module param so that attempting to
run a selftest without kvm.ko loaded results in a SKIP message about KVM not
being loaded/enabled, versus some random parameter not existing.
- SKIP tests that hit EACCES when attempting to access a file, with a "Root
required?" help message. In most cases, the test just needs to be run with
elevated permissions.
KVM x86 misc changes for 6.17
- Prevert the host's DEBUGCTL.FREEZE_IN_SMM (Intel only) when running the
guest. Failure to honor FREEZE_IN_SMM can bleed host state into the guest.
- Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter (Intel only) to
prevent L1 from running L2 with features that KVM doesn't support, e.g. BTF.
- Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to the
vCPU's CPUID model.
- Rework the MSR interception code so that the SVM and VMX APIs are more or
less identical.
- Recalculate all MSR intercepts from the "source" on MSR filter changes, and
drop the dedicated "shadow" bitmaps (and their awful "max" size defines).
- WARN and reject loading kvm-amd.ko instead of panicking the kernel if the
nested SVM MSRPM offsets tracker can't handle an MSR.
- Advertise support for LKGS (Load Kernel GS base), a new instruction that's
loosely related to FRED, but is supported and enumerated independently.
- Fix a user-triggerable WARN that syzkaller found by stuffing INIT_RECEIVED,
a.k.a. WFS, and then putting the vCPU into VMX Root Mode (post-VMXON). Use
the same approach KVM uses for dealing with "impossible" emulation when
running a !URG guest, and simply wait until KVM_RUN to detect that the vCPU
has architecturally impossible state.
- Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling interception of
APERF/MPERF reads, so that a "properly" configured VM can "virtualize"
APERF/MPERF (with many caveats).
- Reject KVM_SET_TSC_KHZ if vCPUs have been created, as changing the "default"
frequency is unsupported for VMs with a "secure" TSC, and there's no known
use case for changing the default frequency for other VM types.
Expand kvm_pin_this_task_to_pcpu() into a set of APIs to allow pinning a
task (or self) to a CPU (any or specific). This will allow deduplicating
code throughout a variety of selftests.
Opportunistically use "self" instead of "this_task" as it is both more
concise and less ambiguous.
Link: https://lore.kernel.org/r/20250626001225.744268-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that KVM x86 allows compiling out support for in-kernel I/O APIC (and
PIC and PIT) emulation, i.e. allows disabling KVM_CREATE_IRQCHIP for all
intents and purposes, fall back to a split IRQ chip for x86 if creating
the full in-kernel version fails with ENOTTY.
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20250611213557.294358-17-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Expand the SKIP conditions of the open_path_or_exit() helper to skip on
EACCES as well as ENOENT. Most often, lack of permissions to a file
needed by a KVM selftests is due to a file being root-only by default,
not because of any bug/misconfiguration that warrants failing a test.
Link: https://lore.kernel.org/r/20250516215909.2551628-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add an inner __open_path_or_exit() API to let the caller provide additional
information on ENOENT to try and help the user figure out why the test is
being skipped, e.g. for files like the page_idle bitmap needed by the
access tracking perf, which is dependent on a Kconfig.
Immediately convert /dev/kvm to the new API, both as an example and because
users might not know that some architectures/setups require loading KVM.
Link: https://lore.kernel.org/r/20250516215909.2551628-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Probe /dev/kvm when getting a KVM module param so that attempting to load
a module param super early in a selftest generates a SKIP message about
KVM not being loaded/enabled, versus some random parameter not existing.
E.g. KVM x86's unconditional retrieval of force_emulation_prefix during
kvm_selftest_arch_init() generates a rather confusing error message that
takes far too much triage to understand.
Link: https://lore.kernel.org/r/20250516215909.2551628-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM selftests changes for 6.16:
- Add support for SNP to the various SEV selftests.
- Add a selftest to verify fastops instructions via forced emulation.
- Add MGLRU support to the access tracking perf test.
On LoongArch system, 16K page is used in general and GVA width is 47 bit
while GPA width is 47 bit also, here add new VM mode VM_MODE_P47V47_16K.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Now that the binary stats cache infrastructure is largely scope agnostic,
add support for vCPU-scoped stats. Like VM stats, open and cache the
stats FD when the vCPU is created so that it's guaranteed to be valid when
vcpu_get_stats() is invoked.
Account for the extra per-vCPU file descriptor in kvm_set_files_rlimit(),
so that tests that create large VMs don't run afoul of resource limits.
To sanity check that the infrastructure actually works, and to get a bit
of bonus coverage, add an assert in x86's xapic_ipi_test to verify that
the number of HLTs executed by the test matches the number of HLT exits
observed by KVM.
Tested-by: Manali Shukla <Manali.Shukla@amd.com>
Link: https://lore.kernel.org/r/20250111005049.1247555-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the max vCPUs test's RLIMIT_NOFILE adjustments to common code, and
use the new helper to adjust the resource limit for non-barebones VMs by
default. x86's recalc_apic_map_test creates 512 vCPUs, and a future
change will open the binary stats fd for all vCPUs, which will put the
recalc APIC test above some distros' default limit of 1024.
Link: https://lore.kernel.org/r/20250111005049.1247555-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Get and cache a VM's binary stats FD when the VM is opened, as opposed to
waiting until the stats are first used. Opening the stats FD outside of
__vm_get_stat() will allow converting it to a scope-agnostic helper.
Note, this doesn't interfere with kvm_binary_stats_test's testcase that
verifies a stats FD can be used after its own VM's FD is closed, as the
cached FD is also closed during kvm_vm_free().
Link: https://lore.kernel.org/r/20250111005049.1247555-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a struct and helpers to manage the binary stats cache, which is
currently used only for VM-scoped stats. This will allow expanding the
selftests infrastructure to provide support for vCPU-scoped binary stats,
which, except for the ioctl to get the stats FD are identical to VM-scoped
stats.
Defer converting __vm_get_stat() to a scope-agnostic helper to a future
patch, as getting the stats FD from KVM needs to be moved elsewhere
before it can be made completely scope-agnostic.
Link: https://lore.kernel.org/r/20250111005049.1247555-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Fail the test if it attempts to read a stat that doesn't exist, e.g. due
to a typo (hooray, strings), or because the test tried to get a stat for
the wrong scope. As is, there's no indiciation of failure and @data is
left untouched, e.g. holds '0' or random stack data in most cases.
Fixes: 8448ec5993 ("KVM: selftests: Add NX huge pages test")
Link: https://lore.kernel.org/r/20250111005049.1247555-4-seanjc@google.com
[sean: fixup spelling mistake, courtesy of Colin Ian King]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Close/free a VM's binary stats cache when the VM is released, not when the
VM is fully freed. When a VM is re-created, e.g. for state save/restore
tests, the stats FD and descriptor points at the old, defunct VM. The FD
is still valid, in that the underlying stats file won't be freed until the
FD is closed, but reading stats will always pull information from the old
VM.
Note, this is a benign bug in the current code base as none of the tests
that recreate VMs use binary stats.
Fixes: 83f6e109f5 ("KVM: selftests: Cache binary stats metadata for duration of test")
Link: https://lore.kernel.org/r/20250111005049.1247555-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When allocating and freeing a VM's cached binary stats info, check for a
NULL descriptor, not a '0' file descriptor, as '0' is a legal FD. E.g. in
the unlikely scenario the kernel installs the stats FD at entry '0',
selftests would reallocate on the next __vm_get_stat() and/or fail to free
the stats in kvm_vm_free().
Fixes: 83f6e109f5 ("KVM: selftests: Cache binary stats metadata for duration of test")
Link: https://lore.kernel.org/r/20250111005049.1247555-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Don't check for an unhandled exception if KVM_RUN failed, e.g. if it
returned errno=EFAULT, as reporting unhandled exceptions is done via a
ucall, i.e. requires KVM_RUN to exit cleanly. Theoretically, checking
for a ucall on a failed KVM_RUN could get a false positive, e.g. if there
were stale data in vcpu->run from a previous exit.
Reviewed-by: James Houghton <jthoughton@google.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20241128005547.4077116-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When freeing a VM, don't call into KVM to manually remove each memslot,
simply cleanup and free any userspace assets associated with the memory
region. KVM is ultimately responsible for ensuring kernel resources are
freed when the VM is destroyed, deleting memslots one-by-one is
unnecessarily slow, and unless a test is already leaking the VM fd, the
VM will be destroyed when kvm_vm_release() is called.
Not deleting KVM's memslot also allows cleaning up dead VMs without having
to care whether or not the to-be-freed VM is dead or alive.
Reported-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/kvmarm/Zy0bcM0m-N18gAZz@google.com/
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Unlink memory regions when freeing a VM, even though it's not strictly
necessary since all tracking structures are freed soon after. The time
spent deleting entries is negligible, and not unlinking entries is
confusing, e.g. it's easy to overlook that the tree structures are
freed by the caller.
Link: https://lore.kernel.org/r/20240802201429.338412-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Print the guest's random seed during VM creation if and only if the seed
has changed since the seed was last printed. The vast majority of tests,
if not all tests at this point, set the seed during test initialization
and never change the seed, i.e. printing it every time a VM is created is
useless noise.
Snapshot and print the seed during early selftest init to play nice with
tests that use the kselftests harness, at the cost of printing an unused
seed for tests that change the seed during test-specific initialization,
e.g. dirty_log_perf_test. The kselftests harness runs each testcase in a
separate process that is forked from the original process before creating
each testcase's VM, i.e. waiting until first VM creation will result in
the seed being printed by each testcase despite it never changing. And
long term, the hope/goal is that setting the seed will be handled by the
core framework, i.e. that the dirty_log_perf_test wart will naturally go
away.
Reported-by: Yi Lai <yi1.lai@intel.com>
Reported-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240627021756.144815-2-dapeng1.mi@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM selftests treewide updates for 6.10:
- Define _GNU_SOURCE for all selftests to fix a warning that was introduced by
a change to kselftest_harness.h late in the 6.9 cycle, and because forcing
every test to #define _GNU_SOURCE is painful.
- Provide a global psuedo-RNG instance for all tests, so that library code can
generate random, but determinstic numbers.
- Use the global pRNG to randomly force emulation of select writes from guest
code on x86, e.g. to help validate KVM's emulation of locked accesses.
- Rename kvm_util_base.h back to kvm_util.h, as the weird layer of indirection
was added purely to avoid manually #including ucall_common.h in a handful of
locations.
- Allocate and initialize x86's GDT, IDT, TSS, segments, and default exception
handlers at VM creation, instead of forcing tests to manually trigger the
related setup.
KVM selftests cleanups and fixes for 6.10:
- Enhance the demand paging test to allow for better reporting and stressing
of UFFD performance.
- Convert the steal time test to generate TAP-friendly output.
- Fix a flaky false positive in the xen_shinfo_test due to comparing elapsed
time across two different clock domains.
- Skip the MONITOR/MWAIT test if the host doesn't actually support MWAIT.
- Avoid unnecessary use of "sudo" in the NX hugepage test to play nice with
running in a minimal userspace environment.
- Allow skipping the RSEQ test's sanity check that the vCPU was able to
complete a reasonable number of KVM_RUNs, as the assert can fail on a
completely valid setup. If the test is run on a large-ish system that is
otherwise idle, and the test isn't affined to a low-ish number of CPUs, the
vCPU task can be repeatedly migrated to CPUs that are in deep sleep states,
which results in the vCPU having very little net runtime before the next
migration due to high wakeup latencies.
Effectively revert the movement of code from kvm_util.h => kvm_util_base.h,
as the TL;DR of the justification for the move was to avoid #idefs and/or
circular dependencies between what ended up being ucall_common.h and what
was (and now again, is), kvm_util.h.
But avoiding #ifdef and circular includes is trivial: don't do that. The
cost of removing kvm_util_base.h is a few extra includes of ucall_common.h,
but that cost is practically nothing. On the other hand, having a "base"
version of a header that is really just the header itself is confusing,
and makes it weird/hard to choose names for headers that actually are
"base" headers, e.g. to hold core KVM selftests typedefs.
For all intents and purposes, this reverts commit
7d9a662ed9.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a global guest_random_state instance, i.e. a pseudo-RNG, so that an
RNG is available for *all* tests. This will allow randomizing behavior
in core library code, e.g. x86 will utilize the pRNG to conditionally
force emulation of writes from within common guest code.
To allow for deterministic runs, and to be compatible with existing tests,
allow tests to override the seed used to initialize the pRNG.
Note, the seed *must* be overwritten before a VM is created in order for
the seed to take effect, though it's perfectly fine for a test to
initialize multiple VMs with different seeds.
And as evidenced by memstress_guest_code(), it's also a-ok to instantiate
more RNGs using the global seed (or a modified version of it). The goal
of the global RNG is purely to ensure that _a_ source of random numbers is
available, it doesn't have to be the _only_ RNG.
Link: https://lore.kernel.org/r/20240314185459.2439072-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Define _GNU_SOURCE is the base CFLAGS instead of relying on selftests to
manually #define _GNU_SOURCE, which is repetitive and error prone. E.g.
kselftest_harness.h requires _GNU_SOURCE for asprintf(), but if a selftest
includes kvm_test_harness.h after stdio.h, the include guards result in
the effective version of stdio.h consumed by kvm_test_harness.h not
defining asprintf():
In file included from x86_64/fix_hypercall_test.c:12:
In file included from include/kvm_test_harness.h:11:
../kselftest_harness.h:1169:2: error: call to undeclared function
'asprintf'; ISO C99 and later do not support implicit function declarations
[-Wimplicit-function-declaration]
1169 | asprintf(&test_name, "%s%s%s.%s", f->name,
| ^
When including the rseq selftest's "library" code, #undef _GNU_SOURCE so
that rseq.c controls whether or not it wants to build with _GNU_SOURCE.
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240423190308.2883084-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
This removes the concept of "subtypes", instead letting the tests use proper
VM types that were recently added. While the sev_init_vm() and sev_es_init_vm()
are still able to operate with the legacy KVM_SEV_INIT and KVM_SEV_ES_INIT
ioctls, this is limited to VMs that are created manually with
vm_create_barebones().
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-16-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM x86 PMU changes for 6.9:
- Fix several bugs where KVM speciously prevents the guest from utilizing
fixed counters and architectural event encodings based on whether or not
guest CPUID reports support for the _architectural_ encoding.
- Fix a variety of bugs in KVM's emulation of RDPMC, e.g. for "fast" reads,
priority of VMX interception vs #GP, PMC types in architectural PMUs, etc.
- Add a selftest to verify KVM correctly emulates RDMPC, counter availability,
and a variety of other PMC-related behaviors that depend on guest CPUID,
i.e. are difficult to validate via KVM-Unit-Tests.
- Zero out PMU metadata on AMD if the virtual PMU is disabled to avoid wasting
cycles, e.g. when checking if a PMC event needs to be synthesized when
skipping an instruction.
- Optimize triggering of emulated events, e.g. for "count instructions" events
when skipping an instruction, which yields a ~10% performance improvement in
VM-Exit microbenchmarks when a vPMU is exposed to the guest.
- Tighten the check for "PMI in guest" to reduce false positives if an NMI
arrives in the host while KVM is handling an IRQ VM-Exit.
KVM selftests changes for 6.9:
- Add macros to reduce the amount of boilerplate code needed to write "simple"
selftests, and to utilize selftest TAP infrastructure, which is especially
beneficial for KVM selftests with multiple testcases.
- Add basic smoke tests for SEV and SEV-ES, along with a pile of library
support for handling private/encrypted/protected memory.
- Fix benign bugs where tests neglect to close() guest_memfd files.
Add helpers to read integer module params, which is painfully non-trivial
because the pain of dealing with strings in C is exacerbated by the kernel
inserting a newline.
Don't bother differentiating between int, uint, short, etc. They all fit
in an int, and KVM (thankfully) doesn't have any integer params larger
than an int.
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-24-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
open_path_or_exit() is used for '/dev/kvm', '/dev/sev', and
'/sys/module/%s/parameters/%s' and skipping test when the entry is missing
is completely reasonable. Other errors, however, may indicate a real issue
which is easy to miss. E.g. when 'hyperv_features' test was entering an
infinite loop the output was:
./hyperv_features
Testing access to Hyper-V specific MSRs
1..0 # SKIP - /dev/kvm not available (errno: 24)
and this can easily get overlooked.
Keep ENOENT case 'special' for skipping tests and fail when open() results
in any other errno.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240129085847.2674082-2-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM/arm64 updates for Linux 6.8
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB
base granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with
a prefix branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV
support to that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Add yet another macro to the VM/vCPU ioctl() framework to detect when an
ioctl() failed because KVM killed/bugged the VM, i.e. when there was
nothing wrong with the ioctl() itself. If KVM kills a VM, e.g. by way of
a failed KVM_BUG_ON(), all subsequent VM and vCPU ioctl()s will fail with
-EIO, which can be quite misleading and ultimately waste user/developer
time.
Use KVM_CHECK_EXTENSION on KVM_CAP_USER_MEMORY to detect if the VM is
dead and/or bug, as KVM doesn't provide a dedicated ioctl(). Using a
heuristic is obviously less than ideal, but practically speaking the logic
is bulletproof barring a KVM change, and any such change would arguably
break userspace, e.g. if KVM returns something other than -EIO.
Without the detection, tearing down a bugged VM yields a cryptic failure
when deleting memslots:
==== Test Assertion Failure ====
lib/kvm_util.c:689: !ret
pid=45131 tid=45131 errno=5 - Input/output error
1 0x00000000004036c3: __vm_mem_region_delete at kvm_util.c:689
2 0x00000000004042f0: kvm_vm_free at kvm_util.c:724 (discriminator 12)
3 0x0000000000402929: race_sync_regs at sync_regs_test.c:193
4 0x0000000000401cab: main at sync_regs_test.c:334 (discriminator 6)
5 0x0000000000416f13: __libc_start_call_main at libc-start.o:?
6 0x000000000041855f: __libc_start_main_impl at ??:?
7 0x0000000000401d40: _start at ??:?
KVM_SET_USER_MEMORY_REGION failed, rc: -1 errno: 5 (Input/output error)
Which morphs into a more pointed error message with the detection:
==== Test Assertion Failure ====
lib/kvm_util.c:689: false
pid=80347 tid=80347 errno=5 - Input/output error
1 0x00000000004039ab: __vm_mem_region_delete at kvm_util.c:689 (discriminator 5)
2 0x0000000000404660: kvm_vm_free at kvm_util.c:724 (discriminator 12)
3 0x0000000000402ac9: race_sync_regs at sync_regs_test.c:193
4 0x0000000000401cb7: main at sync_regs_test.c:334 (discriminator 6)
5 0x0000000000418263: __libc_start_call_main at libc-start.o:?
6 0x00000000004198af: __libc_start_main_impl at ??:?
7 0x0000000000401d90: _start at ??:?
KVM killed/bugged the VM, check the kernel log for clues
Suggested-by: Michal Luczaj <mhal@rbox.co>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Colton Lewis <coltonlewis@google.com>
Link: https://lore.kernel.org/r/20231108010953.560824-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add helpers to invoke KVM_SET_USER_MEMORY_REGION2 directly so that tests
can validate of features that are unique to "version 2" of "set user
memory region", e.g. do negative testing on gmem_fd and gmem_offset.
Provide a raw version as well as an assert-success version to reduce
the amount of boilerplate code need for basic usage.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-33-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a "vm_shape" structure to encapsulate the selftests-defined "mode",
along with the KVM-defined "type" for use when creating a new VM. "mode"
tracks physical and virtual address properties, as well as the preferred
backing memory type, while "type" corresponds to the VM type.
Taking the VM type will allow adding tests for KVM_CREATE_GUEST_MEMFD
without needing an entirely separate set of helpers. At this time,
guest_memfd is effectively usable only by confidential VM types in the
form of guest private memory, and it's expected that x86 will double down
and require unique VM types for TDX and SNP guests.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-30-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add helpers to convert memory between private and shared via KVM's
memory attributes, as well as helpers to free/allocate guest_memfd memory
via fallocate(). Userspace, i.e. tests, is NOT required to do fallocate()
when converting memory, as the attributes are the single source of truth.
Provide allocate() helpers so that tests can mimic a userspace that frees
private memory on conversion, e.g. to prioritize memory usage over
performance.
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-28-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for creating "private" memslots via KVM_CREATE_GUEST_MEMFD and
KVM_SET_USER_MEMORY_REGION2. Make vm_userspace_mem_region_add() a wrapper
to its effective replacement, vm_mem_add(), so that private memslots are
fully opt-in, i.e. don't require update all tests that add memory regions.
Pivot on the KVM_MEM_PRIVATE flag instead of the validity of the "gmem"
file descriptor so that simple tests can let vm_mem_add() do the heavy
lifting of creating the guest memfd, but also allow the caller to pass in
an explicit fd+offset so that fancier tests can do things like back
multiple memslots with a single file. If the caller passes in a fd, dup()
the fd so that (a) __vm_mem_region_delete() can close the fd associated
with the memory region without needing yet another flag, and (b) so that
the caller can safely close its copy of the fd without having to first
destroy memslots.
Co-developed-by: Ackerley Tng <ackerleytng@google.com>
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-27-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use KVM_SET_USER_MEMORY_REGION2 throughout KVM's selftests library so that
support for guest private memory can be added without needing an entirely
separate set of helpers.
Note, this obviously makes selftests backwards-incompatible with older KVM
versions from this point forward.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-26-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop kvm_userspace_memory_region_find(), it's unused and a terrible API
(probably why it's unused). If anything outside of kvm_util.c needs to
get at the memslot, userspace_mem_region_find() can be exposed to give
others full access to all memory region/slot information.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-25-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add additional pages to the guest to account for the number of pages
the ucall headers need. The only reason things worked before is the
ucall headers are fairly small. If they were ever to increase in
size the guest could run out of memory.
This is done in preparation for adding string formatting options to
the guest through the ucall framework which increases the size of
the ucall headers.
Fixes: 426729b2cf ("KVM: selftests: Add ucall pool based implementation")
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230729003643.1053367-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
