Qualcomm driver updates for v6.3
This introduces a new driver for the Data Capture and Compare block,
which provides a mechanism for capturing hardware state (access MMIO
registers) either upon request of triggered automatically e.g. upon a
watchdog bite, for post mortem analysis.
The remote filesystem memory share driver gains support for having its
memory bound to more than a single VMID.
The SCM driver gains the minimal support needed to support a new
mechanism where secure world can put calls on hold and later request
them to be retried.
Support for the new SA8775P platform is added to rpmhpd, QDU1000 is
added to the SCM driver and a long list of platforms are added to the
socinfo driver. Support for socinfo data revision 16 is also introduced.
Lastly a driver to program the ramp controller in MSM8976 is introduced.
* tag 'qcom-drivers-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
firmware: qcom: scm: Add wait-queue handling logic
dt-bindings: firmware: qcom,scm: Add optional interrupt
Revert "dt-bindings: power: rpmpd: Add SM4250 support"
Revert "soc: qcom: rpmpd: Add SM4250 support"
soc: qcom: socinfo: Add a bunch of older SoCs
dt-bindings: arm: qcom,ids: Add a bunch of older SoCs
dt-bindings: arm: qcom,ids: Add QRD board ID
soc: qcom: socinfo: Fix soc_id order
dt-bindings: soc: qcom: smd-rpm: Exclude MSM8936 from glink-channels
dt-bindings: firmware: qcom: scm: Separate VMIDs from header to bindings
soc: qcom: rmtfs: Optionally map RMTFS to more VMs
dt-bindings: reserved-memory: rmtfs: Make qcom,vmid an array
dt-bindings: firmware: scm: Add QDU1000/QRU1000 compatible
dt-bindings: firmware: qcom,scm: narrow clocks and interconnects
dt-bindings: firmware: qcom,scm: document MSM8226 clocks
soc: qcom: ramp_controller: Make things static
soc: qcom: rmphpd: add power domains for sa8775p
dt-bindings: power: qcom,rpmpd: document sa8775p
PM: AVS: qcom-cpr: Fix an error handling path in cpr_probe()
soc: qcom: dcc: rewrite description of dcc sysfs files
...
Link: https://lore.kernel.org/r/20230126163008.3676950-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The pseries platform can support dynamic secure boot (i.e. secure boot
using user-defined keys) using variables contained with the PowerVM LPAR
Platform KeyStore (PLPKS). Using the powerpc secvar API, expose the
relevant variables for pseries dynamic secure boot through the existing
secvar filesystem layout.
The relevant variables for dynamic secure boot are signed in the
keystore, and can only be modified using the H_PKS_SIGNED_UPDATE hcall.
Object labels in the keystore are encoded using ucs2 format. With our
fixed variable names we don't have to care about encoding outside of the
necessary byte padding.
When a user writes to a variable, the first 8 bytes of data must contain
the signed update flags as defined by the hypervisor.
When a user reads a variable, the first 4 bytes of data contain the
policies defined for the object.
Limitations exist due to the underlying implementation of sysfs binary
attributes, as is the case for the OPAL secvar implementation -
partial writes are unsupported and writes cannot be larger than PAGE_SIZE.
(Even when using bin_attributes, which can be larger than a single page,
sysfs only gives us one page's worth of write buffer at a time, and the
hypervisor does not expose an interface for partial writes.)
Co-developed-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Co-developed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
[mpe: Add NLS dependency to fix build errors, squash fix from ajd]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-25-ajd@linux.ibm.com
Include the support for enumerating and provisioning ram regions for
v6.3. This also include a default policy change for ram / volatile
device-dax instances to assign them to the dax_kmem driver by default.
Merge the general CXL updates with fixes targeting v6.2-rc for v6.3.
Resolve a conflict with the fix and move of cxl_report_and_clear() from
pci.c to core/pci.c.
IPU policy can be disabled, let's add description for it and other policy.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Allow users to create new color matching descriptors in addition to
the default one. These must be associated with a UVC format in order
to be transmitted to the host, which is achieved by symlinking from
the format to the newly created color matching descriptor - extend
the uncompressed and mjpeg formats to support that linking operation.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230202114142.300858-7-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document the settings exported by rt9467 charger driver through sysfs
entries:
- sysoff_enable
Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com>
[update kernel version and date]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Document the settings exported by rt9471 charger driver through sysfs entries:
- sysoff_enable
- port_detect_enable
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
[update kernel version and date]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The perf subsystem assumes that all counters are by default per-CPU. So
the user space tool reads a counter from each CPU. However, the IOMMU
counters are system-wide and can be read from any CPU. Here we use a CPU
mask to restrict counting to one CPU to handle the issue. (with CPU
hotplug notifier to choose a different CPU if the chosen one is taken
off-line).
The CPU is exposed to /sys/bus/event_source/devices/dmar*/cpumask for
the user space perf tool.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230128200428.1459118-6-kan.liang@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Implement the IOMMU performance monitor capability, which supports the
collection of information about key events occurring during operation of
the remapping hardware, to aid performance tuning and debug.
The IOMMU perfmon support is implemented as part of the IOMMU driver and
interfaces with the Linux perf subsystem.
The IOMMU PMU has the following unique features compared with the other
PMUs.
- Support counting. Not support sampling.
- Does not support per-thread counting. The scope is system-wide.
- Support per-counter capability register. The event constraints can be
enumerated.
- The available event and event group can also be enumerated.
- Extra Enhanced Commands are introduced to control the counters.
Add a new variable, struct iommu_pmu *pmu, to in the struct intel_iommu
to track the PMU related information.
Add iommu_pmu_register() and iommu_pmu_unregister() to register and
unregister a IOMMU PMU. The register function setup the IOMMU PMU ops
and invoke the standard perf_pmu_register() interface to register a PMU
in the perf subsystem. This patch only exposes the functions. The
following patch will enable them in the IOMMU driver.
The IOMMU PMUs can be found under /sys/bus/event_source/devices/dmar*
The available filters and event format can be found at the format folder
$ ls /sys/bus/event_source/devices/dmar1/format/
event event_group filter_ats filter_ats_en filter_page_table
filter_page_table_en
The supported events can be found at the events folder
$ ls /sys/bus/event_source/devices/dmar1/events/
ats_blocked fs_nonleaf_hit int_cache_hit_posted
iommu_mem_blocked iotlb_hit pasid_cache_lookup ss_nonleaf_hit
ctxt_cache_hit fs_nonleaf_lookup int_cache_lookup
iommu_mrds iotlb_lookup pg_req_posted ss_nonleaf_lookup
ctxt_cache_lookup int_cache_hit_nonposted iommu_clocks
iommu_requests pasid_cache_hit pw_occupancy
The command below illustrates filter usage with a simple example.
$ perf stat -e dmar1/iommu_requests,filter_ats_en=0x1,filter_ats=0x1/
-a sleep 1
Performance counter stats for 'system wide':
368,947 dmar1/iommu_requests,filter_ats_en=0x1,filter_ats=0x1/
1.002592074 seconds time elapsed
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230128200428.1459118-5-kan.liang@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch exports the CAN channel ID as a sysfs attribute. The CAN
channel ID is a user-configurable u8/u32 identifier that can be set
individually for each CAN interface of a PEAK USB device.
Exporting the channel ID as a sysfs attribute allows users to easily read
the ID and to write udev rules that can match against the ID. This is
especially useful for PEAK USB devices that do not export a serial
number at SUB level.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Lukas Magel <lukas.magel@posteo.net>
Link: https://lore.kernel.org/all/20230116200932.157769-7-lukas.magel@posteo.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Suzuki writes:
coresight: Updates for v6.3
- Dynamic TraceID allocation scheme for CoreSight trace source. Allows systems
with > 44 CPUs to use the ETMs. TraceID is advertised via AUX_OUTPUT_HWID
packets in perf.data. Also allows allocating trace-ids for non-CPU bound trace
components (e.g., Qualcomm TPDA).
- Support for Qualcomm TPDA and TPDM CoreSight devices.
- Support for Ultrasoc SMB CoreSight Sink buffer.
- Fixes for HiSilicon PTT driver
- MAINTAINERS update: Add Reviewer for HiSilicon PTT driver
- Bug fixes for CTI power management and sysfs mode
- Fix CoreSight ETM4x TRCSEQRSTEVRn access
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux: (35 commits)
coresight: tmc: Don't enable TMC when it's not ready.
coresight: tpda: fix return value check in tpda_probe()
Coresight: tpda/tpdm: remove incorrect __exit annotation
coresight: perf: Output trace id only once
coresight: Fix uninitialised variable use in coresight_disable
Documentation: coresight: tpdm: Add dummy comment after sysfs list
Documentation: coresight: Extend title heading syntax in TPDM and TPDA documentation
Documentation: trace: Add documentation for TPDM and TPDA
dt-bindings: arm: Adds CoreSight TPDA hardware definitions
Coresight: Add TPDA link driver
coresight-tpdm: Add integration test support
coresight-tpdm: Add DSB dataset support
dt-bindings: arm: Add CoreSight TPDM hardware
Coresight: Add coresight TPDM source driver
coresight: core: Use IDR for non-cpu bound sources' paths.
coresight: trace-id: Add debug & test macros to Trace ID allocation
coresight: events: PERF_RECORD_AUX_OUTPUT_HW_ID used for Trace ID
kernel: events: Export perf_report_aux_output_id()
coresight: trace id: Remove legacy get trace ID function.
coresight: etmX.X: stm: Remove trace_id() callback
...
Commit 98de59bfe4 ("take calculation of final prot in
security_mmap_file() into a helper") caused ima_file_mmap() to receive the
protections requested by the application and not those applied by the
kernel.
After restoring the original MMAP_CHECK behavior, existing attestation
servers might be broken due to not being ready to handle new entries
(previously missing) in the IMA measurement list.
Restore the original correct MMAP_CHECK behavior, instead of keeping the
current buggy one and introducing a new hook with the correct behavior.
Otherwise, there would have been the risk of IMA users not noticing the
problem at all, as they would actively have to update the IMA policy, to
switch to the correct behavior.
Also, introduce the new MMAP_CHECK_REQPROT hook to keep the current
behavior, so that IMA users could easily fix a broken attestation server,
although this approach is discouraged due to potentially missing
measurements.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Due to holidays we started -next with more -fixes in-flight than
usual, and people have been asking where they are. Backmerge to get
things better in sync.
Conflicts:
- Tiny conflict in drm_fbdev_generic.c between variable rename and
missing error handling that got added.
- Conflict in drm_fb_helper.c between the added call to vgaswitcheroo
in drm_fb_helper_single_fb_probe and a refactor patch that extracted
lots of helpers and incidentally removed the dev local variable.
Readd it to make things compile.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The current discard_io_aware_gran is a fixed value, change it to be
configurable through the sys node.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Xu writes:
FPGA Manager changes for 6.3-rc1
Microchip:
- Ivan's reliability improvements for Microchip Polarfire FPGA
FPGA DFL doc:
- Randy and Yilun's kernel doc fixes.
The 2 patches, "fpga: dfl: more kernel-doc corrections" &
"fpga: dfl: kernel-doc corrections" conflicts with Matthew's FPGA
patch "fpga: dfl: add basic support for DFHv1" on tty-next. Yilun
resolved the conflicts on:
--branch for-next https://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga.git/
On that branch, Matthew's patch is applied first then kernel doc fixes
follow.
Intel m10 bmc MFD & sub devices:
- Lee's topic branch merged, to support new BMC board type with new
PMCI interface to host, as well as its new sub devices.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: bridge: return errors in the show() method of the "state" attribute
fpga: dfl: more kernel-doc corrections
fpga: dfl: kernel-doc corrections
fpga: microchip-spi: separate data frame write routine
fpga: microchip-spi: rewrite status polling in a time measurable way
fpga: microchip-spi: move SPI I/O buffers out of stack
mfd: intel-m10-bmc: Add PMCI driver
fpga: m10bmc-sec: Make rsu status type specific
fpga: m10bmc-sec: Create helpers for rsu status/progress checks
mfd: intel-m10-bmc: Prefix register defines with M10BMC_N3000
fpga: intel-m10-bmc: Rework flash read/write
mfd: intel-m10-bmc: Support multiple CSR register layouts
mfd: intel-m10-bmc: Split into core and spi specific parts
mfd: intel-m10-bmc: Rename the local variables
mfd: intel-m10-bmc: Create m10bmc_platform_info for type specific info
mfd: intel-m10-bmc: Add missing includes to header
Stephen Rothwell reported htmldocs warnings when merging accel tree:
Documentation/ABI/testing/sysfs-driver-habanalabs:201: ERROR: Unexpected indentation.
Documentation/ABI/testing/sysfs-driver-habanalabs:201: WARNING: Block quote ends without a blank line; unexpected unindent.
Documentation/ABI/testing/sysfs-driver-habanalabs:201: ERROR: Unexpected indentation.
Documentation/ABI/testing/sysfs-driver-habanalabs:201: WARNING: Block quote ends without a blank line; unexpected unindent.
Fix these by fixing alignment of list of card status returned by
/sys/class/habanalabs/hl<n>/status.
Link: https://lore.kernel.org/linux-next/20230120130634.61c3e857@canb.auug.org.au/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As device status was changed recently, we must update the
documentation as well.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Arm SCMI updates for v6.3
The main addition is a unified userspace interface for SCMI irrespective
of the underlying transport and along with some changed to refactor the
SCMI stack probing sequence.
1. SCMI unified userspace interface
This is to have a unified way of testing an SCMI platform firmware
implementation for compliance, fuzzing etc., from the perspective of
the non-secure OSPM irrespective of the underlying transport supporting
SCMI. It is just for testing/development and not a feature intended fo
use in production.
Currently an SCMI Compliance Suite[1] can only work by injecting SCMI
messages using the mailbox test driver only which makes it transport
specific and can't be used with any other transport like virtio,
smc/hvc, optee, etc. Also the shared memory can be transport specific
and it is better to even abstract/hide those details while providing
the userspace access. So in order to scale with any transport, we need
a unified interface for the same.
In order to achieve that, SCMI "raw mode support" is being added through
debugfs which is more configurable as well. A userspace application
can inject bare SCMI binary messages into the SCMI core stack; such
messages will be routed by the SCMI regular kernel stack to the backend
platform firmware using the configured transport transparently. This
eliminates the to know about the specific underlying transport
internals that will be taken care of by the SCMI core stack itself.
Further no additional changes needed in the device tree like in the
mailbox-test driver.
[1] https://gitlab.arm.com/tests/scmi-tests
2. Refactoring of the SCMI stack probing sequence
On some platforms, SCMI transport can be provide by OPTEE/TEE which
introduces certain dependency in the probe ordering. In order to address
the same, the SCMI bus is split into its own module which continues to
be initialized at subsys_initcall, while the SCMI core stack, including
its various transport backends (like optee, mailbox, virtio, smc), is
now moved into a separate module at module_init level.
This allows the other possibly dependent subsystems to register and/or
access SCMI bus well before the core SCMI stack and its dependent
transport backends.
* tag 'scmi-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (31 commits)
firmware: arm_scmi: Clarify raw per-channel ABI documentation
firmware: arm_scmi: Add per-channel raw injection support
firmware: arm_scmi: Add the raw mode co-existence support
firmware: arm_scmi: Call raw mode hooks from the core stack
firmware: arm_scmi: Reject SCMI drivers when configured in raw mode
firmware: arm_scmi: Add debugfs ABI documentation for raw mode
firmware: arm_scmi: Add core raw transmission support
firmware: arm_scmi: Add debugfs ABI documentation for common entries
firmware: arm_scmi: Populate a common SCMI debugfs root
debugfs: Export debugfs_create_str symbol
include: trace: Add platform and channel instance references
firmware: arm_scmi: Add internal platform/channel identifiers
firmware: arm_scmi: Move errors defs and code to common.h
firmware: arm_scmi: Add xfer helpers to provide raw access
firmware: arm_scmi: Add flags field to xfer
firmware: arm_scmi: Refactor scmi_wait_for_message_response
firmware: arm_scmi: Refactor polling helpers
firmware: arm_scmi: Refactor xfer in-flight registration routines
firmware: arm_scmi: Split bus and driver into distinct modules
firmware: arm_scmi: Introduce a new lifecycle for protocol devices
...
Link: https://lore.kernel.org/r/20230120162152.1438456-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Triple Modular Redundancy(TMR) subsystem contains three microblaze cores,
subsystem is fault-tolerant and continues to operate nominally after
encountering an error. Together with the capability to detect and recover
from errors, the implementation ensures the reliability of the entire
subsystem. TMR Manager is responsible for performing recovery of the
subsystem detects the fault via a break signal it invokes microblaze
software break handler which calls the tmr manager driver api to
update the error count and status, added support for fault detection
feature via sysfs interface.
Usage:
To know the break handler count(Error count):
cat /sys/devices/platform/amba_pl/44a10000.tmr_manager/errcnt
Signed-off-by: Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com>
Link: https://lore.kernel.org/r/20221125054113.122833-3-appana.durga.kedareswara.rao@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Integration test for tpdm can help to generate the data for
verification of the topology during TPDM software bring up.
Sample:
echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink
echo 1 > /sys/bus/coresight/devices/tpdm0/enable_source
echo 1 > /sys/bus/coresight/devices/tpdm0/integration_test
echo 2 > /sys/bus/coresight/devices/tpdm0/integration_test
cat /dev/tmc_etf0 > /data/etf-tpdm0.bin
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230117145708.16739-6-quic_jinlmao@quicinc.com
There is a custom (non-USB IF) extension to the USB standard:
https://wicg.github.io/webusb/
This specification is published under the W3C Community Contributor
Agreement, which in particular allows to implement the specification
without any royalties.
The specification allows USB gadgets to announce an URL to landing
page and describes a Javascript interface for websites to interact
with the USB gadget, if the user allows it. It is currently
supported by Chromium-based browsers, such as Chrome, Edge and
Opera on all major operating systems including Linux.
This patch adds optional support for Linux-based USB gadgets
wishing to expose such a landing page.
During device enumeration, a host recognizes that the announced
USB version is at least 2.01, which means, that there are BOS
descriptors available. The device than announces WebUSB support
using a platform device capability. This includes a vendor code
under which the landing page URL can be retrieved using a
vendor-specific request.
Previously, the BOS descriptors would unconditionally include an
LPM related descriptor, as BOS descriptors were only ever sent
when the device was LPM capable. As this is no longer the case,
this patch puts this descriptor behind a lpm_capable condition.
Usage is modeled after os_desc descriptors:
echo 1 > webusb/use
echo "https://www.kernel.org" > webusb/landingPage
lsusb will report the device with the following lines:
Platform Device Capability:
bLength 24
bDescriptorType 16
bDevCapabilityType 5
bReserved 0
PlatformCapabilityUUID {3408b638-09a9-47a0-8bfd-a0768815b665}
WebUSB:
bcdVersion 1.00
bVendorCode 0
iLandingPage 1 https://www.kernel.org
Signed-off-by: Jó Ágila Bitsch <jgilab@gmail.com>
Link: https://lore.kernel.org/r/Y8Crf8P2qAWuuk/F@jo-einhundert
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the TraceID API to allocate ETM trace IDs dynamically.
As with the etm4x we allocate on enable / disable for perf,
allocate on enable / reset for sysfs.
Additionally we allocate on sysfs file read as both perf and sysfs
can read the ID before enabling the hardware.
Remove sysfs option to write trace ID - which is inconsistent with
both the dynamic allocation method and the fixed allocation method
previously used.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-7-mike.leach@linaro.org
