One new boards, the CoolPi CM5 SoM and 4B SBC. Basic node for the rk3588
display controller and a bunch of small improvements for different boards,
* tag 'v6.8-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (21 commits)
arm64: dts: rockchip: Fix led pinctrl of lubancat 1
arm64: dts: rockchip: correct gpio_pwrctrl1 typo on nanopc-t6
arm64: dts: rockchip: correct gpio_pwrctrl1 typo on rock-5b
arm64: dts: rockchip: support poweroff on the rock-5b
arm64: dts: rockchip: Support poweroff on Orange Pi 5
arm64: dts: rockchip: nanopc-t6 sdmmc beautification
arm64: dts: rockchip: Fix rk3588 USB power-domain clocks
arm64: dts: rockchip: configure eth pad driver strength for orangepi r1 plus lts
arm64: dts: rockchip: Support poweroff on NanoPC-T6
arm64: dts: rockchip: rk3308-rock-pi-s gpio-line-names cleanup
arm64: dts: rockchip: Add support for rk3588 based board Cool Pi CM5 EVB
dt-bindings: arm: rockchip: Add Cool Pi CM5
arm64: dts: rockchip: Add support for rk3588s based board Cool Pi 4B
dt-bindings: arm: rockchip: Add Cool Pi 4B
dt-bindings: vendor-prefixes: Add Cool Pi
arm64: dts: rockchip: add gpio-line-names to rk3328-rock-pi-e
arm64: dts: rockchip: make use gpio-keys for buttons on puma-haikou
arm64: dts: rockchip: expose BIOS Disable feedback pin on rk3399-puma
arm64: dts: rockchip: fix misleading comment in rk3399-puma-haikou.dts
arm64: dts: rockchip: Add vop on rk3588
...
Link: https://lore.kernel.org/r/3711719.VqM8IeB0Os@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New boards are the Geniatech XPI-3128 (RK3128), Sonoff iHost (rv1109)
One "new" soc is the rv1109 which is a two-core variant of the rv1126
and everything else is identical.
Lots of love for the old rk3128 (power-domains, gpu, gmac, usb) and
rv1126 (uart pins, i2c2 special case) and rework of aliases to have
core busses that are hard-numbered in boards and documentation centrally
in the dtsi, but the per board aliases in the boards (ethernet).
Plus the rk3036 got a yaml hdmi binding which required some small fixes.
* tag 'v6.8-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (24 commits)
ARM: dts: rockchip: add hdmi-connector node to rk3036-kylin
ARM: dts: rockchip: fix rk3036 hdmi ports node
ARM: dts: rockchip: add gpio alias for gpio dt nodes
ARM: dts: rockchip: Move uart aliases to SoC dtsi for RK3128
ARM: dts: rockchip: Move i2c aliases to SoC dtsi for RK3128
ARM: dts: rockchip: Move gpio aliases to SoC dtsi for RK3128
ARM: dts: rockchip: Add Sonoff iHost Smart Home Hub
dt-bindings: arm: rockchip: Add Sonoff iHost
ARM: dts: rockchip: Add rv1109 SoC
ARM: dts: rockchip: Split up rgmii1 pinctrl on rv1126
ARM: dts: rockchip: Add i2c2 node to rv1126
ARM: dts: rockchip: Serial aliases for rv1126
ARM: dts: rockchip: Add alternate UART pins to rv1126
ARM: dts: rockchip: Enable GPU for XPI-3128
ARM: dts: rockchip: Add GPU node for RK3128
ARM: dts: rockchip: Add power-controller for RK3128
ARM: dts: rockchip: Enable gmac for XPI-3128
ARM: dts: rockchip: Add gmac node for RK3128
ARM: dts: rockchip: Make usbphy the parent of SCLK_USB480M for RK3128
ARM: dts: rockchip: Add dwc2 otg fifo siztes for RK3128
...
Link: https://lore.kernel.org/r/3197878.5fSG56mABF@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Current binding has following compatible combination for SoM, IO board
- NCM6A: edgeble,neural-compute-module-6a,
edgeble,neural-compute-module-6a-io
- NCM6B: edgeble,neural-compute-module-6b,
edgeble,neural-compute-module-6b-io
This board topology now changes in final revisions, so a common
compatible IO board, NCM6A-IO, is made available for both variants
of SoM: NCM6A and NCM6B, produced by Edgeble AI.
With this change, 6b-io is not as available and 6a; 6b SoM's have the
same compatible IO board as 6a-io. This change is due to the common
optimised design of the IO board made available now in final revisions,
which was not the case in initial revisions.
Update the dt-bindings with this new change.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231125142914.57459-1-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Neural Compute Module 6B(Neu6B) is a 96boards SoM-CB compute module
based on Rockchip RK3588J from Edgeble AI.
Edgeble Neural Compute Module 6B(Neu6B) IO board is an industrial
form factor evaluation board from Edgeble AI.
Neu6B needs to mount on top of this IO board in order to create complete
Edgeble Neural Compute Module 6B(Neu6B) IO platform.
This patch add dt-bindings for Edgeble Neu6 Model B SoM based IO board.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230516163454.997736-1-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add devicetree binding for Anbernic RG353PS. This device is identical
to the RG353P, except it does not have a touchscreen, does not have
an eMMC, only includes 1GB of RAM, and ships with only the 2nd
revision panel based on a Sitronix ST7703 controller. Support for the
panel has been added in a separate commit.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230512162039.31132-2-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Radxa Compute Module 3(CM3) is one of the modules from a series
System On Module based on the Radxa ROCK 3 series and is compatible
with Raspberry Pi CM4 in pinout and form factor.
Specification:
- Rockchip RK3566
- up to 8GB LPDDR4
- up to 128GB high performance eMMC
- Optional wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless,
BT 5.0, BLE with onboard and external antenna.
- Gigabit Ethernet PHY
Add dt-bindings for Radxa CM3.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230112105902.192852-1-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Neural Compute Module 6(Neu6) is a 96boards SoM-CB compute module
based on Rockchip RK3588 from Edgeble AI.
Edgeble Neural Compute Module 6(Neu6) IO board is an industrial
form factor evaluation board from Edgeble AI.
Neu6 needs to mount on top of this IO board in order to create complete
Edgeble Neural Compute Module 6(Neu6) IO platform.
This patch add dt-bindings for Edgeble Neu6 Model A SoM based IO board.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230110134658.820691-1-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Neural Compute Module 2(Neu2) is a 96boards SoM-CB compute module
based on Rockchip RV1126 from Edgeble AI.
Edgeble Neural Compute Module 2(Neu2) IO board is an industrial
form factor evaluation board from Edgeble AI.
Neu2 needs to mount on top of this IO board in order to create complete
Edgeble Neural Compute Module 2(Neu2) IO platform.
Add dt-bindings for it.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20221129075424.189655-7-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The SOQuartz Model A base board is a carrier board for the CM4
form factor, designed around the PINE64 SOQuartz CM4 SoM.
The board sports "Model A" dimensions like the Quartz64 Model A,
but is not to be confused with that.
As for I/O, it features USB 2 ports, Gigabit Ethernet, a PCIe 2
x1 slot, HDMI, a 40-pin GPIO header, CSI/DSI connectors, an eDP
flat-flex cable connector, a 12V DC barrel jack for power input
and power/reset buttons as well as a microSD card slot.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221116115337.541601-4-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add a compatible for the SOQuartz Blade base board to the rockchip
platforms binding.
The SOQuartz Blade is a PoE-capable carrier board for the CM4 SoM
form factor, designed around the SOQuartz CM4 System-on-Module.
The board features the usual connectivity (GPIO, USB, HDMI,
Ethernet) and an M.2 slot for SSDs. It may also be powered from
a 5V barrel jack input, and has a 3.5mm jack for UART debug
output.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221116115337.541601-2-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Pull devicetree updates from Rob Herring:
"DT core:
- Fix node refcounting in of_find_last_cache_level()
- Constify device_node in of_device_compatible_match()
- Fix 'dma-ranges' handling in bus controller nodes
- Fix handling of initrd start > end
- Improve error reporting in of_irq_init()
- Taint kernel on DT unittest running
- Use strscpy instead of strlcpy
- Add a build target, dt_compatible_check, to check for compatible
strings used in kernel sources against compatible strings in DT
schemas.
- Handle DT_SCHEMA_FILES changes when rebuilding
DT bindings:
- LED bindings for MT6370 PMIC
- Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller,
mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc,
and arm,versatile-sysreg to DT schema format
- Add nvmem cells to u-boot,env schema
- Add more LED_COLOR_ID definitions
- Require 'opp-table' uses to be a node
- Various schema fixes to match QEMU 'virt' DT usage
- Tree wide dropping of redundant 'Device Tree Binding' in schema
titles
- More (unevaluated|additional)Properties fixes in schema child nodes
- Drop various redundant minItems equal to maxItems"
* tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (62 commits)
of: base: Shift refcount decrement in of_find_last_cache_level()
dt-bindings: leds: Add MediaTek MT6370 flashlight
dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator
dt-bindings: mailbox: Convert mtk-gce to DT schema
of: base: make of_device_compatible_match() accept const device node
of: Fix "dma-ranges" handling for bus controllers
of: fdt: Remove unused struct fdt_scan_status
dt-bindings: display: st,stm32-dsi: Handle data-lanes in DSI port node
dt-bindings: timer: Add power-domains for TI timer-dm on K3
dt: Add a check for undocumented compatible strings in kernel
kbuild: take into account DT_SCHEMA_FILES changes while checking dtbs
dt-bindings: interrupt-controller: migrate MIPS CPU interrupt controller text bindings to YAML
dt-bindings: i2c: migrate mt7621 text bindings to YAML
dt-bindings: power: gpcv2: correct patternProperties
dt-bindings: virtio: Convert virtio,pci-iommu to DT schema
dt-bindings: timer: arm,arch_timer: Allow dual compatible string
dt-bindings: arm: cpus: Add kryo240 compatible
dt-bindings: display: bridge: nxp,tda998x: Convert to json-schema
dt-bindings: nvmem: u-boot,env: add basic NVMEM cells
dt-bindings: remoteproc: qcom,adsp: enforce smd-edge schema
...
