This DC patchset brings improvements in multiple areas. In summary, we highlight:
- change static screen wait frame_count for ips
- Fix hang/underflow when transitioning to ODM4:1
- Only clear symclk otg flag for HDMI
- Fix lightup regression with DP2 single display configs
- Refactor phantom resource allocation
- Refactor dc_state interface
- Wake DMCUB before executing GPINT commands
- Wake DMCUB before sending a command
- Refactor DMCUB enter/exit idle interface
- enable dcn35 idle power optimization
- fix usb-c connector_type
- add debug option for ExtendedVBlank DLG adjust
- Set test_pattern_changed update flag on pipe enable
- dereference variable before checking for zero
- get dprefclk ss info from integration info table
- skip error logging when DMUB is inactive from S3
- make flip_timestamp_in_us a 64-bit variable
- Add case for dcn35 to support usb4 dmub hpd event
- Add function for dumping clk registers
- Unify optimize_required flags and VRR adjustments
- Revert using channel_width as 2 for vram table 3.0
- remove HPO PG in driver side
- do not send commands to DMUB if DMUB is inactive from S3
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
the original wait for 2 static frames before enter static screen
was not good enough for IPS-enabled case since enter/exit takes more time.
[How]
Changed logic for hardcoded wait frame values.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Allen Pan <allen.pan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Under some circumstances, disabling an OPTC and attempting to reclaim
its OPP(s) for a different OPTC could cause a hang/underflow due to OPPs
not being properly disconnected from the disabled OPTC.
[How]
Ensure that all OPPs are unassigned from an OPTC when it gets disabled.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
There is a corner case where the symclk otg flag is cleared
when disabling the phantom pipe for subvp (because the phantom
and main pipe share the same link). This is undesired because
we need the maintain the correct symclk otg flag state for
the main pipe.
For now only clear the flag only for HDMI signal type, since
it's only set for HDMI signal type (phantom is virtual). The
ideal solution is to not clear it if the stream is phantom but
currently there's a bug that doesn't allow us to do this. Once
this issue is fixed the proper fix can be implemented.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
After refactoring dc_state, it is always constructed at the time of its
creation. Construction can only happen after dc resources are initialized, so
move creation to be after this.
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
Phantom streams and planes were previously not referenced explcitly on creation.
[HOW?]
To reduce memory management complexity, add an additional phantom streams and planes
reference into dc_state, and move mall_stream_config to stream_status inside
the state to make it safe to modify in shallow copies. Also consildates any logic
that is affected by this change to dc_state.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
Part of the dc_state interface that deals with adding streams and planes should
remain public, while others that deal with internal status' and subvp should be
private to DC.
[HOW?]
Move and rename the public functions to dc_state.h and private functions to
dc_state_priv.h. Also add some additional functions for extracting subvp meta
data from the state.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DMCUB can be in idle when we attempt to interface with the HW through
the GPINT mailbox resulting in a system hang.
[How]
Add dc_wake_and_execute_gpint() to wrap the wake, execute, sleep
sequence.
If the GPINT executes successfully then DMCUB will be put back into
sleep after the optional response is returned.
It functions similar to the inbox command interface.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We can hang in place trying to send commands when the DMCUB isn't
powered on.
[How]
For functions that execute within a DC context or DC lock we can
wrap the direct calls to dm_execute_dmub_cmd/list with code that
exits idle power optimizations and reallows once we're done with
the command submission on success.
For DM direct submissions the DM will need to manage the enter/exit
sequencing manually.
We cannot invoke a DMCUB command directly within the DM execution
helper or we can deadlock.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We can hang in place trying to send commands when the DMCUB isn't
powered on.
[How]
We need to exit out of the idle state prior to sending a command,
but the process that performs the exit also invokes a command itself.
Fixing this issue involves the following:
1. Using a software state to track whether or not we need to start
the process to exit idle or notify idle.
It's possible for the hardware to have exited an idle state without
driver knowledge, but entering one is always restricted to a driver
allow - which makes the SW state vs HW state mismatch issue purely one
of optimization, which should seldomly be hit, if at all.
2. Refactor any instances of exit/notify idle to use a single wrapper
that maintains this SW state.
This works simialr to dc_allow_idle_optimizations, but works at the
DMCUB level and makes sure the state is marked prior to any notify/exit
idle so we don't enter an infinite loop.
3. Make sure we exit out of idle prior to sending any commands or
waiting for DMCUB idle.
This patch takes care of 1/2. A future patch will take care of wrapping
DMCUB command submission with calls to this new interface.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
BIOS switches to use USB-C connector type 0x18, but VBIOS's
objectInfo table not supported yet. driver needs to patch it
based on enc_cap from system integration info table.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Allen Pan <allen.pan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In certain cases, ODM pipe split can occur while stream already has test
pattern enabled. The new pipe used in the ODM combine config must be
configured to output the test pattern in this case.
[How]
If the stream is configured to output test pattern, then set the
test_pattern_changed update flag for the new pipe when it gets enabled.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Driver incorrectly checks if pointer variable OutBpp is null instead of
if the value being pointed to is zero.
[How]
Dereference OutBpp before checking for a value of zero.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Josip Pavic <josip.pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
we have two SSC_En:
we get ssc_info from dce_info for MPLL_SSC_EN.
we used to call VBIOS cmdtbl's smu_info's SS persentage for DPRECLK SS info,
is used for DP AUDIO and VBIOS' smu_info table was from systemIntegrationInfoTable.
since dcn35 VBIOS removed smu_info, driver need to use integrationInfotable directly.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On resume from S3, while DMUB is inactive, DMUB queue and execute
calls will not work. Skip reporting errors in these scenarios
[How]
Add new return code during DMUB queue and execute calls when DMUB
is in S3 state. Skip logging errors in these scenarios
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SVM uses hmm page walk to valid buffer before map to gpu vm. After have partial
migration/mapping do validation on same vm range as migration/map do instead of
whole svm range that can be very large. This change is expected to improve svm
code performance.
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This variable currently overflows after about 71 minutes. This doesn't
cause any known functional issues but it does make debugging more
difficult.
[How]
Make it a 64-bit variable.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Josip Pavic <josip.pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & how]
Refactor dc_is_dmub_outbox_supported() a bit and add case for dcn35 to
register dmub outbox notification irq to handle usb4 relevant hpd event.
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some issues have been raised that appear to be tied to PSR-SU.
To allow users to confirm they're tied to PSR-SU without turning off
PSR entirely introduce a new debug mask:
amdgpu.dcdebugmask=0x200
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There is only a single call to dc_post_update_surfaces_to_stream so
there is no need to have two flags to control it. Unifying this to a
single flag allows dc_stream_adjust_vmin_vmax to skip actual
programming when there is no change required.
[how]
Remove wm_optimze_required flag and set only optimize_required in its
place. Then in dc_stream_adjust_vmin_vmax, check that the stream timing
range matches the requested one and skip programming if they are equal.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On resume from S3, may get apply_idle_optimizations call while DMUB
is inactive which will just time out.
[How]
Set and track power state in dmub_srv and check power state before
sending commands to DMUB. Add interface in both dmub_srv and
dc_dmub_srv
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When application tries to allocate all system memory and cause memory
to swap out. Needs more time for hmm_range_fault to validate the
remaining page for allocation. To be safe, increase timeout value to
1 second for 64MB range.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On gfx943 APU there is no VRAM and page migration, queue CWSR area, svm
range with always mapped flag, is not mapped to GPU correctly. This
works fine if retry fault on CWSR area can be recovered, but could cause
deadlock if there is another retry fault recover waiting for CWSR to
finish.
Fix this by mapping svm range with always mapped flag to GPU with ACCESS
attribute if XNACK ON.
There is side effect, because all GPUs have ACCESS attribute by default
on new svm range with XNACK on, the CWSR area will be mapped to all GPUs
after this change. This side effect will be fixed with Thunk change to
set CWSR svm range with ACCESS_IN_PLACE attribute on the GPU that user
queue is created.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix up on mes process context flush to prevent non-mes devices from
spamming error messages or running into undefined behaviour during
process termination.
Fixes: bd33bb1409 ("drm/amdkfd: fix mes set shader debugger process management")
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The amdgpu_free_extended_power_table is called in every error-handling
paths of amdgpu_parse_extended_power_table. However, after the following
call chain of returning:
amdgpu_parse_extended_power_table
|-> kv_dpm_init / si_dpm_init
(the only two caller of amdgpu_parse_extended_power_table)
|-> kv_dpm_sw_init / si_dpm_sw_init
(the only caller of kv_dpm_init / si_dpm_init, accordingly)
|-> kv_dpm_fini / si_dpm_fini
(goto dpm_failed in xx_dpm_sw_init)
|-> amdgpu_free_extended_power_table
As above, the amdgpu_free_extended_power_table is called twice in this
returning chain and thus a double-free is triggered. Similarily, the
last kfree in amdgpu_parse_extended_power_table also cause a double free
with amdgpu_free_extended_power_table in kv_dpm_fini.
Fixes: 84176663e7 ("drm/amd/pm: create a new holder for those APIs used only by legacy ASICs(si/kv)")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When ps allocated by kzalloc equals to NULL, kv_parse_power_table
frees adev->pm.dpm.ps that allocated before. However, after the control
flow goes through the following call chains:
kv_parse_power_table
|-> kv_dpm_init
|-> kv_dpm_sw_init
|-> kv_dpm_fini
The adev->pm.dpm.ps is used in the for loop of kv_dpm_fini after its
first free in kv_parse_power_table and causes a use-after-free bug.
Fixes: a2e73f56fa ("drm/amdgpu: Add support for CIK parts")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When the allocation of
adev->pm.dpm.dyn_state.vddc_dependency_on_dispclk.entries fails,
amdgpu_free_extended_power_table is called to free some fields of adev.
However, when the control flow returns to si_dpm_sw_init, it goes to
label dpm_failed and calls si_dpm_fini, which calls
amdgpu_free_extended_power_table again and free those fields again. Thus
a double-free is triggered.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create drm_color_ctm_3x4 to support 3x4-dimension plane CTM matrix and
convert DRM CTM to DC CSC float matrix.
v3:
- rename ctm2 to ctm_3x4 (Harry)
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Map the plane CTM driver-specific property to DC plane, instead of DC
stream. The remaining steps to program DPP block are already implemented
on DC shared-code.
v3:
- fix comment about plane and CRTC CTMs priorities (Harry)
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add power save mode workload for smu 13.0.10, so that in compute mode,
pmfw will add margin since some applications requres higher margin.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Plane CTM for pre-blending color space conversion. Only enable
driver-specific plane CTM property on drivers that support both pre- and
post-blending gamut remap matrix, i.e., DCN3+ family. Otherwise it
conflits with DRM CRTC CTM property.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
