unlink_nv12_plane() will clobber parts of the plane state
potentially already set up by plane_atomic_check(), so we
must make sure not to call the two in the wrong order.
The problem happens when a plane previously selected as
a Y plane is now configured as a normal plane by user space.
plane_atomic_check() will first compute the proper plane
state based on the userspace request, and unlink_nv12_plane()
later clears some of the state.
This used to work on account of unlink_nv12_plane() skipping
the state clearing based on the plane visibility. But I removed
that check, thinking it was an impossible situation. Now when
that situation happens unlink_nv12_plane() will just WARN
and proceed to clobber the state.
Rather than reverting to the old way of doing things, I think
it's more clear if we unlink the NV12 planes before we even
compute the new plane state.
Cc: stable@vger.kernel.org
Reported-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Closes: https://lore.kernel.org/intel-gfx/20260212004852.1920270-1-khaled.almahallawy@intel.com/
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Fixes: 6a01df2f1b ("drm/i915: Remove pointless visible check in unlink_nv12_plane()")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260316163953.12905-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
(cherry picked from commit 017ecd0498)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Put the barrier() before the OP so that anything we read out in
OP and check in COND will actually be read out after the timeout
has been evaluated.
Currently the only place where we use OP is __intel_wait_for_register(),
but the use there is precisely susceptible to this reordering, assuming
the ktime_*() stuff itself doesn't act as a sufficient barrier:
__intel_wait_for_register(...)
{
...
ret = __wait_for(reg_value = intel_uncore_read_notrace(...),
(reg_value & mask) == value, ...);
...
}
Cc: stable@vger.kernel.org
Fixes: 1c3c1dc66a ("drm/i915: Add compiler barrier to wait_for")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260313110740.24620-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit a464bace04)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
PSR entry_setup_frames is currently computed directly into struct
intel_dp:intel_psr:entry_setup_frames. This causes a problem if mode change
gets rejected after PSR compute config: Psr_entry_setup_frames computed for
this rejected state is in intel_dp:intel_psr:entry_setup_frame. Fix this by
computing it into intel_crtc_state and copy the value into
intel_dp:intel_psr:entry_setup_frames on PSR enable.
Fixes: 2b981d57e4 ("drm/i915/display: Support PSR entry VSC packet to be transmitted one frame earlier")
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312083710.1593781-3-jouni.hogander@intel.com
(cherry picked from commit 8c229b4aa0)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
intel_dmc_update_dc6_allowed_count() oopses when DMC hasn't been
initialized, and dmc is thus NULL.
That would be the case when the call path is
intel_power_domains_init_hw() -> {skl,bxt,icl}_display_core_init() ->
gen9_set_dc_state() -> intel_dmc_update_dc6_allowed_count(), as
intel_power_domains_init_hw() is called *before* intel_dmc_init().
However, gen9_set_dc_state() calls intel_dmc_update_dc6_allowed_count()
conditionally, depending on the current and target DC states. At probe,
the target is disabled, but if DC6 is enabled, the function is called,
and an oops follows. Apparently it's quite unlikely that DC6 is enabled
at probe, as we haven't seen this failure mode before.
It is also strange to have DC6 enabled at boot, since that would require
the DMC firmware (loaded by BIOS); the BIOS loading the DMC firmware and
the driver stopping / reprogramming the firmware is a poorly specified
sequence and as such unlikely an intentional BIOS behaviour. It's more
likely that BIOS is leaving an unintentionally enabled DC6 HW state
behind (without actually loading the required DMC firmware for this).
The tracking of the DC6 allowed counter only works if starting /
stopping the counter depends on the _SW_ DC6 state vs. the current _HW_
DC6 state (since stopping the counter requires the DC5 counter captured
when the counter was started). Thus, using the HW DC6 state is incorrect
and it also leads to the above oops. Fix both issues by using the SW DC6
state for the tracking.
This is v2 of the fix originally sent by Jani, updated based on the
first Link: discussion below.
Link: https://lore.kernel.org/all/3626411dc9e556452c432d0919821b76d9991217@intel.com
Link: https://lore.kernel.org/all/20260228130946.50919-2-ltao@redhat.com
Fixes: 88c1f9a4d3 ("drm/i915/dmc: Create debugfs entry for dc6 counter")
Cc: Mohammed Thasleem <mohammed.thasleem@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Tao Liu <ltao@redhat.com>
Cc: <stable@vger.kernel.org> # v6.16+
Tested-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260309164803.1918158-1-imre.deak@intel.com
(cherry picked from commit 2344b93af8)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
For eDP read the ALPM DPCD caps after DPCD initalization and just before
the PSR init.
v2: Move intel_alpm_init to intel_edp_init_dpcd (Jouni)
v3: Add Fixes with commit-id (Jouni)
v4: Separated the alpm dpcd read caps from alpm_init and moved to
intel_edp_init_dpcd.
v5: Read alpm_caps always for eDP irrespective of the eDP version (Jouni)
v6: replace drm_dp_dpcd_readb with drm_dp_dpcd_read_byte (Jouni)
Fixes: 15438b3259 ("drm/i915/alpm: Add compute config for lobf")
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patch.msgid.link/20260304072157.1123283-1-arun.r.murthy@intel.com
(cherry picked from commit 88442ba208)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
There are slice row per frame and pic height parameters in DSC that needs
to be configured on every Selective Update in Early Transport mode. Use
helper provided by DSC code to configure these on Selective Update when in
Early Transport mode. Also fill crtc_state->psr2_su_area with full frame
area on full frame update for DSC calculation.
v2: move psr2_su_area under skip_sel_fetch_set_loop label
Bspec: 68927, 71709
Fixes: 467e4e061c ("drm/i915/psr: Enable psr2 early transport as possible")
Cc: <stable@vger.kernel.org> # v6.9+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260304113011.626542-5-jouni.hogander@intel.com
(cherry picked from commit 3140af2fab)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Currently we are aligning Selective Update area to cover cursor fully if
needed only once. It may happen that cursor is in Selective Update area
after pipe alignment and after that covering cursor plane only
partially. Fix this by looping alignment as long as alignment isn't needed
anymore.
v2:
- do not unecessarily loop if cursor was already fully covered
- rename aligned as su_area_changed
Fixes: 1bff93b8bc ("drm/i915/psr: Extend SU area to cover cursor fully if needed")
Cc: <stable@vger.kernel.org> # v6.9+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260304113011.626542-2-jouni.hogander@intel.com
(cherry picked from commit 681e12440d)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
When a scatterlists table of a GEM shmem object of size 4 GB or more is
populated with pages allocated from a folio, unsigned int .length
attribute of a scatterlist may get overflowed if total byte length of
pages allocated to that single scatterlist happens to reach or cross the
4GB limit. As a consequence, users of the object may suffer from hitting
unexpected, premature end of the object's backing pages.
[278.780187] ------------[ cut here ]------------
[278.780377] WARNING: CPU: 1 PID: 2326 at drivers/gpu/drm/i915/i915_mm.c:55 remap_sg+0x199/0x1d0 [i915]
...
[278.780654] CPU: 1 UID: 0 PID: 2326 Comm: gem_mmap_offset Tainted: G S U 6.17.0-rc1-CI_DRM_16981-ged823aaa0607+ #1 PREEMPT(voluntary)
[278.780656] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
[278.780658] Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024
[278.780659] RIP: 0010:remap_sg+0x199/0x1d0 [i915]
...
[278.780786] Call Trace:
[278.780787] <TASK>
[278.780788] ? __apply_to_page_range+0x3e6/0x910
[278.780795] ? __pfx_remap_sg+0x10/0x10 [i915]
[278.780906] apply_to_page_range+0x14/0x30
[278.780908] remap_io_sg+0x14d/0x260 [i915]
[278.781013] vm_fault_cpu+0xd2/0x330 [i915]
[278.781137] __do_fault+0x3a/0x1b0
[278.781140] do_fault+0x322/0x640
[278.781143] __handle_mm_fault+0x938/0xfd0
[278.781150] handle_mm_fault+0x12c/0x300
[278.781152] ? lock_mm_and_find_vma+0x4b/0x760
[278.781155] do_user_addr_fault+0x2d6/0x8e0
[278.781160] exc_page_fault+0x96/0x2c0
[278.781165] asm_exc_page_fault+0x27/0x30
...
That issue was apprehended by the author of a change that introduced it,
and potential risk even annotated with a comment, but then never addressed.
When adding folio pages to a scatterlist table, take care of byte length
of any single scatterlist not exceeding max_segment.
Fixes: 0b62af28f2 ("i915: convert shmem_sg_free_table() to use a folio_batch")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14809
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org # v6.5+
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20260224094944.2447913-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 06249b4e69)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Apparently ICL may hang with an MCE if we write TRANS_VRR_VMAX/FLIPLINE
before enabling TRANS_DDI_FUNC_CTL.
Personally I was only able to reproduce a hang (on an Dell XPS 7390
2-in-1) with an external display connected via a dock using a dodgy
type-C cable that made the link training fail. After the failed
link training the machine would hang. TGL seemed immune to the
problem for whatever reason.
BSpec does tell us to configure VRR after enabling TRANS_DDI_FUNC_CTL
as well. The DMC firmware also does the VRR restore in two stages:
- first stage seems to be unconditional and includes TRANS_VRR_CTL
and a few other VRR registers, among other things
- second stage is conditional on the DDI being enabled,
and includes TRANS_DDI_FUNC_CTL and TRANS_VRR_VMAX/VMIN/FLIPLINE,
among other things
So let's reorder the steps to match to avoid the hang, and
toss in an extra WARN to make sure we don't screw this up later.
BSpec: 22243
Cc: stable@vger.kernel.org
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reported-by: Benjamin Tissoires <bentiss@kernel.org>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15777
Tested-by: Benjamin Tissoires <bentiss@kernel.org>
Fixes: dda7dcd9da ("drm/i915/vrr: Use fixed timings for platforms that support VRR")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260303095414.4331-1-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
(cherry picked from commit 93f3a267c3)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Pull more MM updates from Andrew Morton:
- "mm/vmscan: fix demotion targets checks in reclaim/demotion" fixes a
couple of issues in the demotion code - pages were failed demotion
and were finding themselves demoted into disallowed nodes (Bing Jiao)
- "Remove XA_ZERO from error recovery of dup_mmap()" fixes a rare
mapledtree race and performs a number of cleanups (Liam Howlett)
- "mm: add bitmap VMA flag helpers and convert all mmap_prepare to use
them" implements a lot of cleanups following on from the conversion
of the VMA flags into a bitmap (Lorenzo Stoakes)
- "support batch checking of references and unmapping for large folios"
implements batching to greatly improve the performance of reclaiming
clean file-backed large folios (Baolin Wang)
- "selftests/mm: add memory failure selftests" does as claimed (Miaohe
Lin)
* tag 'mm-stable-2026-02-18-19-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (36 commits)
mm/page_alloc: clear page->private in free_pages_prepare()
selftests/mm: add memory failure dirty pagecache test
selftests/mm: add memory failure clean pagecache test
selftests/mm: add memory failure anonymous page test
mm: rmap: support batched unmapping for file large folios
arm64: mm: implement the architecture-specific clear_flush_young_ptes()
arm64: mm: support batch clearing of the young flag for large folios
arm64: mm: factor out the address and ptep alignment into a new helper
mm: rmap: support batched checks of the references for large folios
tools/testing/vma: add VMA userland tests for VMA flag functions
tools/testing/vma: separate out vma_internal.h into logical headers
tools/testing/vma: separate VMA userland tests into separate files
mm: make vm_area_desc utilise vma_flags_t only
mm: update all remaining mmap_prepare users to use vma_flags_t
mm: update shmem_[kernel]_file_*() functions to use vma_flags_t
mm: update secretmem to use VMA flags on mmap_prepare
mm: update hugetlbfs to use VMA flags on mmap_prepare
mm: add basic VMA flag operation helper functions
tools: bitmap: add missing bitmap_[subset(), andnot()]
mm: add mk_vma_flags() bitmap flag macro helper
...
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
The pipe BPP value shouldn't be set outside of the source's / sink's
valid pipe BPP range, ensure this when increasing the minimum pipe BPP
value to 30 due to HDR.
While at it debug print if the HDR mode was requested for a connector by
setting the corresponding HDR connector property. This indicates
if the requested HDR mode could not be enabled, since the selected
pipe BPP is below 30, due to a sink capability or link BW limit.
v2:
- Also handle the case where the sink could support the target 30 BPP
only in DSC mode due to a BW limit, but the sink doesn't support DSC
or 30 BPP as a DSC input BPP. (Chaitanya)
- Debug print the connector's HDR mode in the link config dump, to
indicate if a BPP >= 30 required by HDR couldn't be reached. (Ankit)
- Add Closes: trailer. (Ankit)
- Don't print the 30 BPP-outside of valid BPP range debug message if
the min BPP is already > 30 (and so a target BPP >= 30 required
for HDR is ensured).
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/7052
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15503
Fixes: ba49a4643c ("drm/i915/dp: Set min_bpp limit to 30 in HDR mode")
Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: <stable@vger.kernel.org> # v6.18+
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> # v1
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260209133817.395823-1-imre.deak@intel.com
(cherry picked from commit 08b7ef16b6)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Pull drm updates from Dave Airlie:
"Highlights:
- amdgpu support for lots of new IP blocks which means newer GPUs
- xe has a lot of SR-IOV and SVM improvements
- lots of intel display refactoring across i915/xe
- msm has more support for gen8 platforms
- Given up on kgdb/kms integration, it's too hard on modern hw
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors
- Use pin_init::zeroed() for fops initialization
- Annotate DRM helpers with __rust_helper
- Improve safety documentation for gem::Object::new()
- Update AlwaysRefCounted imports
- mm: Prevent integer overflow in page_align()
atomic:
- add drm_device pointer to drm_private_obj
- introduce gamma/degamma LUT size check
buddy:
- fix free_trees memory leak
- prevent BUG_ON
bridge:
- introduce drm_bridge_unplug/enter/exit
- add connector argument to .hpd_notify
- lots of recounting conversions
- convert rockchip inno hdmi to bridge
- lontium-lt9611uxc: switch to HDMI audio helpers
- dw-hdmi-qp: add support for HPD-less setups
- Algoltek AG6311 support
panels:
- edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
- st75751: add SPI support
- Sitronix ST7920, Samsung LTL106HL02
- LG LH546WF1-ED01, HannStar HSD156J
- BOE NV130WUM-T08
- Innolux G150XGE-L05
- Anbernic RG-DS
dma-buf:
- improve sg_table debugging
- add tracepoints
- call clear_page instead of memset
- start to introduce cgroup memory accounting in heaps
- remove sysfs stats
dma-fence:
- add new helpers
dp:
- mst: avoid oob access with vcpi=0
hdmi:
- limit infoframes exposure to userspace
gem:
- reduce page table overhead with THP
- fix leak in drm_gem_get_unmapped_area
gpuvm:
- API sanitation for rust bindings
sched:
- introduce new helpers
panic:
- report invalid panic modes
- add kunit tests
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switch to use virtual planes by default
- Fix DSI CMD panels on DPU 3.x
- Rewrite format handling to remove intermediate representation
- Fix watchdog on DPU 8.x+
- Fix TE / Vsync source setting on DPU 8.x+
- Add 3D_Mux on SC7280
- Kaanapali platform support
- Fix UBWC register programming
- Make RM reserve DSPP-enabled mixers for CRTCs with LMs
- Gamma correction support
- DP:
- Enable support for eDP 1.4+ link rate tables
- Fix MDSS1 DP indices on SA8775P, making them to work
- Fix msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Document QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switch to divider_determine_rate()
- MDP5:
- Drop support for MSM8998, SDM660 and SDM630 (switch over to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation
- Get rid of the Result<impl PinInit<T, E>> anti-pattern
- Relocate initializer-specific code into the appropriate initializer
- Use CStr::from_bytes_until_nul() to remove custom helpers
- Improve handling of unexpected firmware values
- Clean up redundant debug prints
- Replace c_str!() with native Rust C-string literals
- Update nova-core task list
nova:
- Align GEM object size to system page size
tyr:
- Use generated uAPI bindings for GpuInfo
- Replace manual sleeps with read_poll_timeout()
- Replace c_str!() with native Rust C-string literals
- Suppress warnings for unread fields
- Fix incorrect register name in print statement
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
* tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel: (1610 commits)
drm/xe/pm: Disable D3Cold for BMG only on specific platforms
drm/xe: Fix kerneldoc for xe_tlb_inval_job_alloc_dep
drm/xe: Fix kerneldoc for xe_gt_tlb_inval_init_early
drm/xe: Fix kerneldoc for xe_migrate_exec_queue
drm/xe/query: Fix topology query pointer advance
drm/xe/guc: Fix kernel-doc warning in GuC scheduler ABI header
drm/xe/guc: Fix CFI violation in debugfs access.
accel/amdxdna: Move RPM resume into job run function
accel/amdxdna: Fix incorrect DPM level after suspend/resume
nouveau/vmm: start tracking if the LPT PTE is valid. (v6)
nouveau/vmm: increase size of vmm pte tracker struct to u32 (v2)
nouveau/vmm: rewrite pte tracker using a struct and bitfields.
accel/amdxdna: Fix incorrect error code returned for failed chain command
accel/amdxdna: Remove hardware context status
drm/bridge: imx8qxp-pixel-combiner: Fix bailout for imx8qxp_pc_bridge_probe()
drm/panel: ilitek-ili9882t: Remove duplicate initializers in tianma_il79900a_dsc
drm/i915/display: fix the pixel normalization handling for xe3p_lpd
drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
...
Pull documentation updates from Jonathan Corbet:
"A slightly calmer cycle for docs this time around, though there is
still a fair amount going on, including:
- Some signs of life on the long-moribund Japanese translation
- Documentation on policies around the use of generative tools for
patch submissions, and a separate document intended for consumption
by generative tools
- The completion of the move of the documentation tools to
tools/docs. For now we're leaving a /scripts/kernel-doc symlink
behind to avoid breaking scripts
- Ongoing build-system work includes the incorporation of
documentation in Python code, better support for documenting
variables, and lots of improvements and fixes
- Automatic linking of man-page references -- cat(1), for example --
to the online pages in the HTML build
...and the usual array of typo fixes and such"
* tag 'docs-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux: (107 commits)
doc: development-process: add notice on testing
tools: sphinx-build-wrapper: improve its help message
docs: sphinx-build-wrapper: allow -v override -q
docs: kdoc: Fix pdfdocs build for tools
docs: ja_JP: process: translate 'Obtain a current source tree'
docs: fix 're-use' -> 'reuse' in documentation
docs: ioctl-number: fix a typo in ioctl-number.rst
docs: filesystems: ensure proc pid substitutable is complete
docs: automarkup.py: Skip common English words as C identifiers
Documentation: use a source-read extension for the index link boilerplate
docs: parse_features: make documentation more consistent
docs: add parse_features module documentation
docs: jobserver: do some documentation improvements
docs: add jobserver module documentation
docs: kabi: helpers: add documentation for each "enum" value
docs: kabi: helpers: add helper for debug bits 7 and 8
docs: kabi: system_symbols: end docstring phrases with a dot
docs: python: abi_regex: do some improvements at documentation
docs: python: abi_parser: do some improvements at documentation
docs: add kabi modules documentation
...
Pixel normalizer is enabled with normalization factor as 1.0 for
FP16 formats in order to support FBC for those formats in xe3p_lpd.
Previously pixel normalizer gets disabled during the plane disable
routine. But there could be plane format settings without explicitly
calling the plane disable in-between and we could endup keeping the
pixel normalizer enabled for formats which we don't require that.
This is causing crc mismatches in yuv formats and FIFO underruns in
planar formats like NV12. Fix this by updating the pixel normalizer
configuration based on the pixel formats explicitly during the plane
settings arm calls itself - enable it for FP16 and disable it for
other formats in HDR capable planes.
v2: avoid redundant pixel normalization setting updates
v3: moved the normalization factor definition to intel_fbc.c and some
updates to comments
v4: simplified the pixel normalizer setting handling
Fixes: 5298eea7ed ("drm/i915/xe3p_lpd: use pixel normalizer for fp16 formats for FBC")
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20260130095919.107805-1-vinod.govindapillai@intel.com
(cherry picked from commit c0dc68f4e2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Static analysis reveals a potential integer underflow in
intel_fbc_stolen_end. This can apparently occur if
intel_parent_stolen_area_size returns zero (or, theoretically, any value
less than 2^23), as 2^23 is subtracted from the return value and stored
in a u64. While this doesn't appear to cause any issues due to the use
of the min() function to clamp the return values from the
intel_fbc_stolen_end function, it would be best practice to avoid
undeflowing values like this on principle. So, rework the function to
prevent the underflow from occurring. Note that the underflow at
present would result in the value of intel_fbc_cfb_base_max being
returned at the end of intel_fbc_stolen_end, so just return that if the
value of intel_parent_stolen_area_size is too small.
While we're here, fix the other comments here and modify the execution
path for readability.
v2: (Jani)
- Fix the comments in intel_fbc_stolen_end
- Use check_sub_overflow
- Remove macro that mirrors SZ_8M, as it is now only referenced once
- Misc. formatting fixes
Fixes: a9da512b3e ("drm/i915: avoid the last 8mb of stolen on BDW/SKL")
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260107162935.8123-2-jonathan.cavitt@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 6695dc2798)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Beyond Display:
- Make 'guc_hw_reg_state' static as it isn't exported (Ben)
- Fix doc build on mei related interface header (Jani)
Display related:
- Fix ggtt fb alignment on Xe display (Tvrtko)
- More display clean-up towards deduplication and full separation (Jani)
- Use the consolidated HDMI tables (Suraj)
- Account for DSC slice overhead (Ankit)
- Prepare GVT for display modularization (Ankit, Jani)
- Enable/Disable DC balance along with VRR DSB (Mitul, Ville)
- Protection against unsupported modes in LT PHY (Suraj)
- Display W/a addition and fixes (Gustavo)
- Fix many SPDX identifier comments (Ankit)
- Incorporate Xe3_LPD changes for CD2X divider (Gustavo)
- Clean up link BW/DSC slice config computation (Imre)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/aWkNThVRSkGAfUVv@intel.com
The minimum/maximum DSC input (i.e. pipe) and compressed (i.e. link) BPP
limits are computed already in intel_dp_compute_config_limits(), so
there is no need to do this again in
mst_stream_dsc_compute_link_config() called later. Remove the
corresponding alignments from the latter function and use the
precomputed (aligned and within bounds) maximum pipe BPP and the min/max
compressed BPP values instead as-is.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-21-imre.deak@intel.com
If dsc_compute_compressed_bpp() failed with a forced pipe BPP value
(where the forced pipe BPP value itself is valid within the min/max pipe
BPP limits), the function will also fail when called with the maximum
pipe BPP value: dsc_compute_compressed_bpp() will try all compressed
BPPs below the passed in pipe BPP value and if the function failed with
a given (low) compressed BPP value it will also fail with a compressed
BPP value higher than the one which failed already.
Based on the above remove the logic to retry computing a compressed BPP
value with the maximum pipe BPP value if computing the compressed BPP
failed already with the (lower) forced pipe BPP value.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-18-imre.deak@intel.com
