Pull sound fixes from Takashi Iwai:
"Just a few device-specific fixes; all small and mostly trivial, should
be pretty safe to take at the late stage"
* tag 'sound-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: sof_sdw: Add a quirk for Lenovo laptop using sidecar amps with cs42l43
ASoC: Intel: sof_es8336: fix headphone GPIO logic inversion
ASoC: amd: yc: Add DMI quirk for Acer TravelMate P216-41-TCO
ASoC: soc-acpi-intel-ptl-match: fix name_prefix of rt1320-2
ALSA: hda/realtek: Add quirk for Inspur S14-G1
ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machine
ALSA: hda/realtek: Really fix headset mic for TongFang X6AR55xU.
ALSA: hda/realtek - fixed speaker no sound
ASoC: amd: yc: Add ASUS ExpertBook PM1503CDA to quirks list
ASoC: fsl: imx-card: Do not force slot width to sample width
ASoC: dt-bindings: fsl,sai: Add support for i.MX952 platform
ASoC: cs35l45: Corrects ASP_TX5 DAPM widget channel
Pull pin control fixes from Linus Walleij:
- Mark the Meson GPIO controller as sleeping to avoid a
context splat
- Fix up the I2S2 and SWR TX group settings in the
Qualcomm SM8350 LPASS pin controller, and implement the
proper .get_direction() callback
- Fix a pin typo in the TG1520 pin controller
- Fix a group name in the Marvell armada 3710 XB pin
controller that got mangled in a DT schema rewrite
* tag 'pinctrl-v6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
dt-bindings: pinctrl: marvell,armada3710-xb-pinctrl: fix 'usb32_drvvbus0' group name
pinctrl: lpass-lpi: implement .get_direction() for the GPIO driver
pinctrl: th1520: Fix typo
pinctrl: qcom: sm8350-lpass-lpi: Merge with SC7280 to fix I2S2 and SWR TX pins
pinctrl: meson: mark the GPIO controller as sleeping
The trailing '0' character of the 'usb32_drvvbus0' pin group got removed
during converting the bindings to DT schema.
$ git grep -n usb32_drvvbus v6.18
v6.18:Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt:106:group usb32_drvvbus0
v6.18:drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:195: PIN_GRP_GPIO("usb32_drvvbus0", 0, 1, BIT(0), "drvbus"),
$ git grep -n usb32_drvvbus v6.19-rc1
v6.19-rc1:Documentation/devicetree/bindings/pinctrl/marvell,armada3710-xb-pinctrl.yaml:91: usb2_drvvbus1, usb32_drvvbus ]
v6.19-rc1:drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:195: PIN_GRP_GPIO("usb32_drvvbus0", 0, 1, BIT(0), "drvbus"),
Add it back to match the group name with the one the driver expects.
Fixes: c1c9641a04 ("dt-bindings: pinctrl: Convert marvell,armada-3710-(sb|nb)-pinctrl to DT schema")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Pull char/misc/iio driver fixes from Greg KH:
"Here are some small char/misc/iio and some other minor driver
subsystem fixes for 6.19-rc7. Nothing huge here, just some fixes for
reported issues including:
- lots of little iio driver fixes
- comedi driver fixes
- mux driver fix
- w1 driver fixes
- uio driver fix
- slimbus driver fixes
- hwtracing bugfix
- other tiny bugfixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (36 commits)
comedi: dmm32at: serialize use of paged registers
mei: trace: treat reg parameter as string
uio: pci_sva: correct '-ENODEV' check logic
uacce: ensure safe queue release with state management
uacce: implement mremap in uacce_vm_ops to return -EPERM
uacce: fix isolate sysfs check condition
uacce: fix cdev handling in the cleanup path
slimbus: core: clean up of_slim_get_device()
slimbus: core: fix of_slim_get_device() kernel doc
slimbus: core: amend slim_get_device() kernel doc
slimbus: core: fix device reference leak on report present
slimbus: core: fix runtime PM imbalance on report present
slimbus: core: fix OF node leak on registration failure
intel_th: rename error label
intel_th: fix device leak on output open()
comedi: Fix getting range information for subdevices 16 to 255
mux: mmio: Fix IS_ERR() vs NULL check in probe()
interconnect: debugfs: initialize src_node and dst_node to empty strings
iio: dac: ad3552r-hs: fix out-of-bound write in ad3552r_hs_write_data_source
iio: accel: iis328dq: fix gain values
...
Pull phy fixes from Vinod Koul:
"A bunch of driver fixes:
- Freescale typec orientation switch fix, clearing register fix,
assertion of phy reset during power on
- Qualcomm pcs register clear before using
- stm one off fix
- TI runtimepm error handling, regmap leak fixes
- Rockchip gadget mode disconnection and disruption fixes
- Tegra register level fix
- Broadcom pointer cast warning fix"
* tag 'phy-fixes-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: freescale: imx8m-pcie: assert phy reset during power on
phy: rockchip: inno-usb2: Fix a double free bug in rockchip_usb2phy_probe()
phy: broadcom: ns-usb3: Fix Wvoid-pointer-to-enum-cast warning (again)
phy: tegra: xusb: Explicitly configure HS_DISCON_LEVEL to 0x7
phy: rockchip: inno-usb2: fix communication disruption in gadget mode
phy: rockchip: inno-usb2: fix disconnection in gadget mode
phy: ti: gmii-sel: fix regmap leak on probe failure
phy: sparx5-serdes: make it selectable for ARCH_LAN969X
phy: ti: da8xx-usb: Handle devm_pm_runtime_enable() errors
phy: stm32-usphyc: Fix off by one in probe()
phy: qcom-qusb2: Fix NULL pointer dereference on early suspend
phy: fsl-imx8mq-usb: Clear the PCS_TX_SWING_FULL field before using it
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for qcs8300
phy: fsl-imx8mq-usb: fix typec orientation switch when built as module
Pull USB fixes from Greg KH:
"Here are some small USB fixes and new device ids for 6.19-rc6
Included in here are:
- new usb-serial device ids
- dwc3-apple driver fixes to get things working properly on that
hardware platform
- ohci/uhci platfrom driver module soft-deps with ehci to remove a
runtime warning that sometimes shows up on some platforms.
- quirk for broken devices that can not handle reading the BOS
descriptor from them without going crazy.
- usb-serial driver fixes
- xhci driver fixes
- usb gadget driver fixes
All of these except for the last xhci fix has been in linux-next for a
while. The xhci fix has been reported by others to solve the issue for
them, so should be ok"
* tag 'usb-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: sideband: don't dereference freed ring when removing sideband endpoint
usb: gadget: uvc: retry vb2_reqbufs() with vb_vmalloc_memops if use_sg fail
usb: gadget: uvc: return error from uvcg_queue_init()
usb: gadget: uvc: fix interval_duration calculation
usb: gadget: uvc: fix req_payload_size calculation
usb: dwc3: apple: Ignore USB role switches to the active role
usb: host: xhci-tegra: Use platform_get_irq_optional() for wake IRQs
USB: OHCI/UHCI: Add soft dependencies on ehci_platform
usb: dwc3: apple: Set USB2 PHY mode before dwc3 init
USB: serial: f81232: fix incomplete serial port generation
USB: serial: ftdi_sio: add support for PICAXE AXE027 cable
USB: serial: option: add Telit LE910 MBIM composition
usb: core: add USB_QUIRK_NO_BOS for devices that hang on BOS descriptor
dt-bindings: usb: qcom,dwc3: Correct MSM8994 interrupts
dt-bindings: usb: qcom,dwc3: Correct IPQ5018 interrupts
tcpm: allow looking for role_sw device in the main node
usb: dwc3: Check for USB4 IP_NAME
Pull sound fixes from Takashi Iwai:
"This became a bit larger than wished for, often seen as a bump at the
middle, but almost all changes are small device-specific fixes, so the
risk must be pretty low.
- SoundWire fix for missing symbol export
- Fixes for device-tree bindings
- A fix for OOB access in USB-audio, spotted by fuzzer
- Quirks for HD-audio, SoundWire, AMD ACP
- A series of ASoC tlv320 and wsa codec fixes
- Other misc fixes in PCM OSS error-handling, Cirrus scodec test,
ASoC ops endianess, davinci, simple-card, and tegra"
* tag 'sound-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits)
ALSA: hda/tas2781: Add newly-released HP laptop
ASoC: rt5640: Fix duplicate clock properties in DT binding
ALSA: hda/realtek: Add quirk for HP Pavilion x360 to enable mute LED
ASoC: tlv320adcx140: fix word length
ASoC: tlv320adcx140: Propagate error codes during probe
ASoC: tlv320adcx140: fix null pointer
ASoC: tlv320adcx140: invert DRE_ENABLE
ASoC: sdw_utils: cs42l43: Enable Headphone pin for LINEOUT jack type
ASoC: sdw_utils: Call init callbacks on the correct codec DAI
soundwire: Add missing EXPORT for sdw_slave_type
ALSA: usb-audio: Prevent excessive number of frames
ALSA: hda/cirrus_scodec_test: Fix test suite name
ALSA: hda/cirrus_scodec_test: Fix incorrect setup of gpiochip
ALSA: hda/realtek: Add quirk for Asus Zephyrus G14 2025 using CS35L56, fix speakers
ASoC: amd: yc: Fix microphone on ASUS M6500RE
ASoC: tegra: Revert fix for uninitialized flat cache warning in tegra210_ahub
ASoC: dt-bindings: rockchip-spdif: Allow "port" node
ASoC: dt-bindings: realtek,rt5640: Allow 7 for realtek,jack-detect-source
ASoC: dt-bindings: realtek,rt5640: Add missing properties/node
ASoC: dt-bindings: realtek,rt5640: Document port node
...
interconnect fixes for v6.19-rc
This contains a few small fixes for the current cycle.
- dt-bindings: interconnect: qcom,sa8775p-rpmh: Fix incorrectly added reg and clocks
- MAINTAINERS: Add interconnect-clk.h to interconnect API entry
- interconnect: debugfs: initialize src_node and dst_node to empty strings
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.19-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: debugfs: initialize src_node and dst_node to empty strings
MAINTAINERS: Add interconnect-clk.h to interconnect API entry
dt-bindings: interconnect: qcom,sa8775p-rpmh: Fix incorrectly added reg and clocks
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This series fixes a problem with soc_sdw_utils.c calling the wrong
codec init callbacks, because it assumed that the DAI name could be
used to uniquely identify the codec. This isn't the case, especially
on SDCA which is a generic driver for many parts.
The first patch is needed to add a missing export to SoundWire core.
Pull SCSI fixes from James Bottomley:
"Only one core change (and one in doc only) the rest are drivers.
The one core fix is for some inline encrypting drives that can't
handle encryption requests on non-data commands (like error handling
ones); it saves the request level encryption parameters in the eh_save
structure so they can be cleared for error handling and restored after
it is completed"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: host: mediatek: Make read-only array scale_us static const
scsi: bfa: Update outdated comment
scsi: mpt3sas: Update maintainer list
scsi: ufs: core: Configure MCQ after link startup
scsi: core: Fix error handler encryption support
scsi: core: Correct documentation for scsi_test_unit_ready()
scsi: ufs: dt-bindings: Fix several grammar errors
Merge series from Jon Hunter <jonathanh@nvidia.com>:
This series includes fixes for the realtek,rt5640 dt-binding to address
a few warnings that are observed when running the CHECK_DTBS=y for some
DTBs that use this codec.
The brcm,iproc-nic-i2c variant has 2 reg entries.
The second one is related to the brcm,ape-hsls-addr-mask property, but it's
not clear what a proper description would be.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
In a vain attempt to consolidate the email zoo switch everything to the
kernel.org account.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull SoC fixes from Arnd Bergmann:
"The main code change is a revert of the Raspberry Pi RP1 overlay
support that was decided to not be ready.
The other fixes are all for devicetree sources:
- ethernet configuration on ixp42x-actiontec-mi424wr is board
revision specific
- validation warning fixes for imx27/imx51/imx6, hikey960 and k3
- Minor corrections across imx8 boards, addressing all types of
issues with interrups, dma, ethernet and clock settings, all simple
one-line changes"
* tag 'soc-fixes-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
arm64: dts: hisilicon: hikey960: Drop "snps,gctl-reset-quirk" and "snps,tx_de_emphasis*" properties
Documentation/process: maintainer-soc: Mark 'make' as commands
Documentation/process: maintainer-soc: Be more explicit about defconfig
arm64: dts: mba8mx: Fix Ethernet PHY IRQ support
arm64: dts: imx8qm-ss-dma: correct the dma channels of lpuart
arm64: dts: imx8mp: Fix LAN8740Ai PHY reference clock on DH electronics i.MX8M Plus DHCOM
arm64: dts: freescale: tx8p-ml81: fix eqos nvmem-cells
arm64: dts: freescale: moduline-display: fix compatible
dt-bindings: arm: fsl: moduline-display: fix compatible
ARM: dts: imx6q-ba16: fix RTC interrupt level
arm64: dts: freescale: imx95-toradex-smarc: fix SMARC_SDIO_WP label position
arm64: dts: freescale: imx95-toradex-smarc: use edge trigger for ethphy1 interrupt
arm64: dts: add off-on-delay-us for usdhc2 regulator
arm64: dts: imx8qm-mek: correct the light sensor interrupt type to low level
ARM: dts: nxp: imx: Fix mc13xxx LED node names
arm64: dts: imx95: correct I3C2 pclk to IMX95_CLK_BUSWAKEUP
MAINTAINERS: Fix a linusw mail address
arm64: dts: broadcom: rp1: drop RP1 overlay
arm64: dts: broadcom: bcm2712: fix RP1 endpoint PCI topology
misc: rp1: drop overlay support
...
Various boards that use the rt5640 audio codec define a 'port' child
node under the codec node to describe the interface between it and the
SoC that it is connected to. The binding document for the rt5640 codec
does not define the 'port' child node and so this is generating warnings
when running the DTB checks for these boards. Add the 'port' node to the
binding document for the rt5640 codec to fix this.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260108143158.351223-4-jonathanh@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The device-tree property 'realtek,jack-detect-source' currently only
permits values from 0-6. However, commit 2b9c8d2b3c ("ASoC: rt5640:
Add the HDA header support") updated the Realtek rt5640 to support
setting the 'realtek,jack-detect-source' to 7 to support the HDA header.
The Tegra234 platforms currently set 'realtek,jack-detect-source' to 7
for the HDA header and this is causing a warning when building
device-tree.
audio-codec@1c (realtek,rt5640): realtek,jack-detect-source:
7 is not one of [0, 1, 2, 3, 4, 5, 6]
Given that the driver already supports this settings, update the binding
document for the rt5640 device to add the HDA header as a valid
configuration for the 'realtek,jack-detect-source' property.
Fixes: 2b9c8d2b3c ("ASoC: rt5640: Add the HDA header support")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260108143158.351223-3-jonathanh@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit eba5a0bac2 ("ASoC: dt-bindings: realtek,rt5640: Convert to
dtschema") converted the rt5640 dt-binding to yaml format but in the
process dropped 'clock' and 'clock-names' properties that are used to
specify the codec 'mclk'. This is causing DTB build warnings for boards
that use this codec and define an 'mclk' in device-tree. Update the
rt5640 binding document to add the optional mclk.
Fixes: eba5a0bac2 ("ASoC: dt-bindings: realtek,rt5640: Convert to dtschema")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260108143158.351223-2-jonathanh@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
i.MX fixes for 6.19:
- A mba8mx fix from Alexander Stein to correct Ethernet PHY IRQ trigger
type
- An i.MX95 fix from Carlos Song to correct I3C2 pclk
- A couple of imx8qm-mek changes from Haibo Chen to fix light sensor
interrupt type and usdhc2 regulator configuration
- An imx6q-ba16 change from Ian Ray to fix RTC interrupt level
- An imx8mp-dhcom-som change from Marek Vasut to fix sporadic Ethernet
link bouncing caused by interruptions on the PHY reference clock
- A couple of imx8mp-tx8p changes from Maud Spierings to fix compatible
and eqos nvmem-cells
- An ARM i.MX fix from Rob Herring to correct mc13xxx LED node names
- An imx8qm-ss-dma change from Sherry Sun to correct DMA channels for
LPUART
- A couple of imx95-toradex-smarc changes from Vitor Soares to fix
ethphy1 interrupt and SMARC_SDIO_WP label position
* tag 'imx-fixes-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: mba8mx: Fix Ethernet PHY IRQ support
arm64: dts: imx8qm-ss-dma: correct the dma channels of lpuart
arm64: dts: imx8mp: Fix LAN8740Ai PHY reference clock on DH electronics i.MX8M Plus DHCOM
arm64: dts: freescale: tx8p-ml81: fix eqos nvmem-cells
arm64: dts: freescale: moduline-display: fix compatible
dt-bindings: arm: fsl: moduline-display: fix compatible
ARM: dts: imx6q-ba16: fix RTC interrupt level
arm64: dts: freescale: imx95-toradex-smarc: fix SMARC_SDIO_WP label position
arm64: dts: freescale: imx95-toradex-smarc: use edge trigger for ethphy1 interrupt
arm64: dts: add off-on-delay-us for usdhc2 regulator
arm64: dts: imx8qm-mek: correct the light sensor interrupt type to low level
ARM: dts: nxp: imx: Fix mc13xxx LED node names
arm64: dts: imx95: correct I3C2 pclk to IMX95_CLK_BUSWAKEUP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
According to the reference manual, MSM8994 does have QUSB2 PHY and does
not have DP/DM IRQs interrupts. It is also logical it has the same
constraints as similar device: MSM8996.
This fixes dtbs_check warnings like:
msm8994-sony-xperia-kitakami-karin.dtb: usb@f92f8800 (qcom,msm8994-dwc3): interrupt-names:1: 'hs_phy_irq' was expected
msm8994-sony-xperia-kitakami-karin.dtb: usb@f92f8800 (qcom,msm8994-dwc3): interrupt-names:2: 'dp_hs_phy_irq' was expected
msm8994-sony-xperia-kitakami-karin.dtb: usb@f92f8800 (qcom,msm8994-dwc3): interrupt-names:3: 'dm_hs_phy_irq' was expected
Fixes: 53c6d854be ("dt-bindings: usb: dwc3: Clean up hs_phy_irq in binding")
Fixes: 6e762f7b8e ("dt-bindings: usb: Introduce qcom,snps-dwc3")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260106185012.19551-4-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge series from Johan Hovold <johan@kernel.org>:
The soundwire update_status() callback may be called multiple times with
the same ATTACHED status but initialisation should only be done when
transitioning from UNATTACHED to ATTACHED.
This series fixes the Qualcomm wsa88xx codec drivers that do unnecessary
reinitialisation or potentially fail to initialise at all.
Included is also a related clean up suppressing a related codec variant
printk.
The compatibles should include the SoM compatible, this board is based
on the Ka-Ro TX8P-ML81 SoM, so add it to allow using shared code in the
bootloader which uses upstream Linux devicetrees as a base.
Also add the hardware revision to the board compatible to handle
revision specific quirks in the bootloader/userspace.
This is a breaking change, but it is early enough that it can be
corrected without causing any issues.
Fixes: 24e67d28ef ("dt-bindings: arm: fsl: Add GOcontroll Moduline Display")
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pull RISC-V updates from Paul Walmsley:
"Nothing exotic here; these are the cleanup and new ISA extension
probing patches (not including CFI):
- Add probing and userspace reporting support for the standard RISC-V
ISA extensions Zilsd and Zclsd, which implement load/store dual
instructions on RV32
- Abstract the register saving code in setup_sigcontext() so it can
be used for stateful RISC-V ISA extensions beyond the vector
extension
- Add the SBI extension ID and some initial data structure
definitions for the RISC-V standard SBI debug trigger extension
- Clean up some code slightly: change some page table functions to
avoid atomic operations oinn !SMP and to avoid unnecessary casts to
atomic_long_t; and use the existing RISCV_FULL_BARRIER macro in
place of some open-coded 'fence rw,rw' instructions"
* tag 'riscv-for-linus-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Add SBI debug trigger extension and function ids
riscv/atomic.h: use RISCV_FULL_BARRIER in _arch_atomic* function.
riscv: hwprobe: export Zilsd and Zclsd ISA extensions
riscv: add ISA extension parsing for Zilsd and Zclsd
dt-bindings: riscv: add Zilsd and Zclsd extension descriptions
riscv: mm: use xchg() on non-atomic_long_t variables, not atomic_long_xchg()
riscv: mm: ptep_get_and_clear(): avoid atomic ops when !CONFIG_SMP
riscv: mm: pmdp_huge_get_and_clear(): avoid atomic ops when !CONFIG_SMP
riscv: signal: abstract header saving for setup_sigcontext
The A523 has four SPI controllers. One of them supports MIPI DBI mode
in addition to standard SPI.
Compared to older generations, this newer controller now has a combined
counter for the RX FIFO ad buffer levels. In older generations, the
RX buffer level was a separate bitfield in the FIFO status register.
In practice this difference is negligible. The buffer is mostly
invisible to the implementation. If programmed I/O transfers are limited
to the FIFO size, then the contents of the buffer seem to always be
flushed over to the FIFO. For DMA, the DRQ trigger levels are only tied
to the FIFO levels. In all other aspects, the controller is the same as
the one in the R329.
Add new compatible strings for the new controllers.
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251221110513.1850535-2-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull spi fixes from Mark Brown:
"A small collection of fixes for various SPI drivers, plus a relaxation
of constraints in the DT for the DesignWare controller to reflect
hardware that's been seen.
There's several fixes for the Cadence QuadSPI driver since a fix
during the last release made some existing issues with error handling
during probe more readily visible"
* tag 'spi-fix-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: mt65xx: Use IRQF_ONESHOT with threaded IRQ
spi: dt-bindings: snps,dw-abp-ssi: Allow up to 16 chip-selects
spi: cadence-quadspi: Fix clock disable on probe failure path
spi: cadence-quadspi: Add error logging for DMA request failure
spi: fsl-cpm: Check length parity before switching to 16 bit mode
spi: mpfs: Fix an error handling path in mpfs_spi_probe()
Commit 8a55fbe4c9 ("dt-bindings: interconnect: add reg and clocks
properties to enable QoS on sa8775p") claims that all interconnects have
clocks and MMIO address space, but that is just not true. Only few
have. Bindings should restrict properties and should not allow
specifying non-existing hardware description, so fix missing constraints
for 'reg' and 'clocks'.
Fixes: 8a55fbe4c9 ("dt-bindings: interconnect: add reg and clocks properties to enable QoS on sa8775p")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251129094612.16838-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- stop setting max_user_freq from the individual drivers as this has
not been hardware related for a while
New drivers:
- Andes ATCRTC100
- Apple SMC
- Nvidia VRS
Drivers:
- renesas-rtca3: add RZ/V2H support
- tegra: add ACPI support"
* tag 'rtc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits)
rtc: spacemit: MFD_SPACEMIT_P1 as dependencies
rtc: atcrtc100: Fix signedness bug in probe()
rtc: max31335: Fix ignored return value in set_alarm
rtc: gamecube: Check the return value of ioremap()
Documentation: ABI: testing: Fix "upto" typo in rtc-cdev
rtc: Add new rtc-macsmc driver for Apple Silicon Macs
dt-bindings: rtc: Add Apple SMC RTC
MAINTAINERS: drop unneeded file entry in NVIDIA VRS RTC DRIVER
rtc: isl12026: Add id_table
rtc: renesas-rtca3: Add support for multiple reset lines
dt-bindings: rtc: renesas,rz-rtca3: Add RZ/V2H support
rtc: tegra: Replace deprecated SIMPLE_DEV_PM_OPS
rtc: tegra: Add ACPI support
rtc: tegra: Use devm_clk_get_enabled() in probe
rtc: Kconfig: add MC34708 to mc13xxx help text
rtc: s35390a: use u8 instead of char for register buffer
rtc: nvvrs: add NVIDIA VRS RTC device driver
dt-bindings: rtc: Document NVIDIA VRS RTC
rtc: atcrtc100: Add ATCRTC100 RTC driver
MAINTAINERS: Add entry for ATCRTC100 RTC driver
...
