[WHY]
Add support for custom recout_width for mpc combine in SPL
[HOW]
1. Rename mpc_combine_h and mpc_combine_v
2. Add flag use_recout_width_aligned to use custom recout_width
3. Create union to use either mpc_num_h_slices or mpc_recout_width_align
Reviewed-by: Navid Assadian <navid.assadian@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
It's possible we still allow IPS2 when all streams are DPMS off but this
is unexpected.
[HOW]
Pass the DM config value into DC so it can use the pure stream count
to decide. We will be in 0 streams for S0i3 so this will still allow
it for D3.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
EASF only applies to luma. Previously both luma and chroma taps
were checked to determine whether to enable EASF.
[HOW]
Only check if luma taps are supported before determining whether
to enable EASF or not.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
On some cards when odm is used, the monitor will have 2 separate pipes
split vertically. When compression is used on the YCbCr colour space on
the second pipe to have correct colours, we need to read a pixel from the
end of first pipe to accurately display colours. Hardware was programmed
properly to account for this extra pixel but it was not calculated
properly in software causing a split screen on some monitors.
[HOW]
The fix adjusts the second pipe's viewport and timings if the pixel
encoding is YCbCr422 or YCbCr420.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: George Shen <george.shen@amd.com>
Signed-off-by: Peterson Guo <peterson.guo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses a null pointer dereference issue in
hwss_setup_dpp(). The issue could occur when pipe_ctx->plane_state is
null. The fix adds a check to ensure `pipe_ctx->plane_state` is not null
before accessing. This prevents a null pointer dereference.
Fixes: 0baae62463 ("drm/amd/display: Refactor fast update to use new HWSS build sequence")
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses a null pointer dereference issue in
dcn20_program_pipe(). Previously, commit 8e4ed3cf16 ("drm/amd/display:
Add null check for pipe_ctx->plane_state in dcn20_program_pipe")
partially fixed the null pointer dereference issue. However, in
dcn20_update_dchubp_dpp(), the variable pipe_ctx is passed in, and
plane_state is accessed again through pipe_ctx. Multiple if statements
directly call attributes of plane_state, leading to potential null
pointer dereference issues. This patch adds necessary null checks to
ensure stability.
Fixes: 8e4ed3cf16 ("drm/amd/display: Add null check for pipe_ctx->plane_state in dcn20_program_pipe")
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are cases where an OTG is remapped from driving a regular HDMI
display to a DP/eDP display. There are also cases where DTBCLK needs to
be enabled for HPO, but DTBCLK DTO programming may be done while OTG is
still enabled which is dangerous as the PIPE_DTO_SRC_SEL programming may
change the pixel clock generator source for a mapped and running OTG and
cause it to hang.
Remove the PIPE_DTO_SRC_SEL programming from this sequence since it is
already done in program_pixel_clk(). Additionally, make sure that
program_pixel_clk sets DTBCLK DTO as source for special HDMI cases.
Cc: stable@vger.kernel.org # 6.11+
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
SPL code forces taps to 1 when ratio is 1:1 and sharpness is off
But for chroma 1:1, need taps > 1 to handle cositing
[How]
Do not force chroma taps to 1 when ratio is 1:1 for YUV420
Remove 420_CHROMA_BYPASS mode for scaler
Reviewed-by: Navid Assadian <navid.assadian@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Early return possible if context has no clk_mgr.
This will lead to an invalid power profile being returned
which looks identical to a profile with the lowest power level.
Add back logic that populated the power profile and overwrite
the value if needed.
Cc: stable@vger.kernel.org
Fixes: d016d0dd5a ("drm/amd/display: Update Interface to Check UCLK DPM")
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Add public API to obtain number of taps in SPL.
[How]
Isolate function to calculate recout, ratios and viewport before
calculating taps. Call function in both public taps API call and private
scaling call.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The mechanism to backup and restore plane states doesn't maintain
refcount, which can cause issues if the refcount of the plane changes
in between backup and restore operations, such as memory leaks if the
refcount was supposed to go down, or double frees / invalid memory
accesses if the refcount was supposed to go up.
[How]
Cache and re-apply current refcount when restoring plane states.
Cc: stable@vger.kernel.org
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are some pipe scaler validation failure when the pipe is phantom
and causes crash in DML validation. Since, scalar parameters are not
as important in phantom pipe and we require this plane to do successful
MCLK switches, the failure condition can be ignored.
[How]
Ignore scalar validation failure if the pipe validation is marked as
phantom pipe.
Cc: stable@vger.kernel.org # 6.11+
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
No check on head pipe during the dml to dc hw mapping will allow illegal
pipe usage. This will result in a wrong pipe topology to cause mpcc tree
totally mess up then cause a display hang.
[How]
Avoid to use the pipe is head in all check and avoid ODM slice during
preferred pipe check.
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since is_dsc_possible is already checked just above, there's no need to
check it again before filling out the DSC settings.
Signed-off-by: Bhavin Sharma <bhavin.sharma@siliconsignals.io>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the nominal VBlank is too small, optimizing for stutter can cause
the prefetch bandwidth to increase drasticaly, resulting in higher
clock and power requirements. Only optimize if it is >3x the stutter
latency.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In the case where a dml allocation fails for any reason, the
current state's dml contexts would no longer be valid. Then
subsequent calls dc_state_copy_internal would shallow copy
invalid memory and if the new state was released, a double
free would occur.
[How]
Reset dml pointers in new_state to NULL and avoid invalid
pointer
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Number of taps is incorrectly being set when integer scaling is enabled.
Taps required when src_rect != dst_rect previously not considered.
Perform the calculations when integer scaling is enabled.
Set taps to 1 if the scaling ratio is 1:1.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unconditionally reading DP tunneling support results in extraneous
errors messages on certain devices. Fix this by guarding the DPCD read
for DP tunneling support for USB4 DPIA endpoints.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
HPD error status does not cover Replay desync error status
while executing autotests and CTS tests.
[How]
Refactor the checking flow, reporting the HPD error based on
different eDP feature.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
1. HDMI does not have 6 bpc support. Having 6 bpc pass validation
does not comply with spec.
2. Validate 420 only for native HDMI, but not apply to pcon use
case.
3. Current mode validation log is not readable.
[how]
1. Cap 8 bpc for dp-hdmi converter.
2. Validate yuv420 for pcon use case as well,
if rgb/yuv444 8bpc cannot fit into pcon bw limitation of
the link from the converter to HDMI sink.
3. Add readable pixel_format and color_depth into debug log.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Implement the new backlight_level_params structure as part of the VBAC
framework, the information in this structure is needed to be passed down
to the DMCUB to identify the backlight control type, to adjust the
backlight of the panel and to perform any required conversions from PWM
to nits or vice versa.
[How]
Modified existing functions to include the new backlight_level_params
structure.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Kaitlyn Tse <Kaitlyn.Tse@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During mode validation, there maybe modes that fail
max_downscale_src_width check and scaling_quality
taps are 0. This will cause an assert to trigger
in spl_set_filters_data() because taps are 0.
[How]
Move taps calculation for non-adaptive scaling mode
to separate function and call it
if max_downscale_src_width fails. This will
populate taps if scaling_quality taps are 0.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Tearing can occur if there is a flip immediate plane and SW cursor.
check_subvp_sw_cursor_fallback_req falls back to SW cursor if the
stream has the potential to use subVP.
Check for fallback not needed if HW cursor is required.
e.g. Fullscreen gaming
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit c2c2ce1e96 ("drm/amd/display: Optimize passive update planes.")
removed the last caller of context_timing_trace.
Remove it.
With that gone, no one is now looking at the 'timing_trace' flag, remove
it and all the places that set it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
cm3_helper_translate_curve_to_degamma_hw_format() since it was added in
2020's commit
03f54d7d34 ("drm/amd/display: Add DCN3 DPP")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix polling DSC registers during S0i3
- Fix idle optimizations entry log
- Change MPC Tree visual confirm colours
- Fix underflow when playing 8K video in full screen mode
- Optimize power up sequence for specific OLED
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previously dscl_prog_data stored pointer to sharpness 1dlut table.
SPL had four pre-generated tables, one for each setup. This allowed
us to minimize number of times we had to recalculate table when
switching between setups.
However, with dual display, this becomes an issue because for a given
setup, we could have a different per app sharpness value than the
global sharpness value. So the pre-generated table will change
but both displays may point to the same table and one of them
will have the wrong sharpness setting.
[How]
Store the sharpness 1dlut table in dscl_prog_data. This ensures
that each display can have its own sharpness setting.
Reviewed-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Whether we really enter idle optimizations are decided within DC.
Printing into dmesg before calling the DC API gives an incorrect
indication that we are entering idle optimization in cases where its
disabled manually.
To fix this, remove the print in DM and add them in DC
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
