mmhubbub_warmup is a field that was only read by the just removed
dc_stream_warmup_writeback() function.
Remove the field and it's initialisers.
It was only ever initialised to a single function value
(dcn30_mmhubbub_warmup) which is called explicitly elsewhere.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dc_stream_warmup_writeback() is unused since it was added in 2019 by
commit 6a652f6d12 ("drm/amd/display: Add warmup escape call support")
Remove it.
Note there is a dcn30 version that's called directly which is kept.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dwb3_set_host_read_rate_control() has been unused since it was added by
commit 8993dee0de ("drm/amd/display: Add DCN3 DWB")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable_surface_flip_reporting() has been unused since it was added by
commit 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 8488646966.
In some test environments causes reporting failures for S0i3/S4.
It shouldn't actually block entry provided there's no race with the
last state being updated, but currently suspecting there's an IPS2
check that's no longer being met.
Fixes: 8488646966 ("drm/amd/display: Don't allow IPS2 in D0 for RCG Dynamic")
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DMColor inaccurately updates color space, bias and scale
destructively in dc_plane_state. This can be resolved by
accurately populating the infos on dc_plane_info where then
translation to plane state can happen as a whole surface update sequence.
[How]
Remove dc_plane_state update in DMColor and update color space,
bias and scale on dc_plane_info.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Right now in dml2 mode validation we are calculating UBF parameters for
prefetch calculation for single and dual DPP scenarios. Data structure
to store such values are just 1D arrays, the single DPP values are
overwritten by the dualDPP values, and we end up using dualDPP for
prefetch calculations twice (once in place of singleDPP support check
and again for dual).
This naturally leads to many problems, one of which validating a mode in
"singleDPP" (when we used dual DPP parameters) and sending the singleDPP
parameters to mode programming, if we cannot support then we observe the
corruption as described in the ticket.
[HOW]
UBF values need to have 2d arrays to store values specific to single and
dual DPP states to avoid single DPP values being overwritten. Other
parameters are recorded on a per state basis such as prefetch UBF values
but they are in the same loop used for calculation and at that point its
fine to overwrite them, its not the case for plain UBF values.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previously, the debugfs did a simple dump of the tracebuffer region.
Because the tracebuffer is a ring, it meant that the entries printed may
not be in chronological order if the ring rolled over. This makes
parsing the tracelog cumbersome.
[How]
Since dmcub provides the current entry count, use that to determine
the latest tracelog entry and output the log chronologically.
Also, the fb region size is not accurate of the actual tracebuffer size;
it has been padded to alignment requirements. Use the tracebuffer size
reported by the fw meta_info, if available. If not, a fallback to the
hardcoded default is needed. To make this value available to other .c
files, its define was moved to dmub_srv.h.
Also, print a indicator at the start of the log if rollover occurred.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Mismatch between mode support and mode programming occurs.
Mode support would calculate higher row vblank than mode programming.
As a result, mode programming fails and hardware isn't properly programmed.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Variables relates to secure display are spreading out within struct
amdgpu_display_manager.
[How]
Encapsulate relevant variables into struct secure_display_context and
adjust relevant affected codes.
Reviewed-by: HaoPing Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Under mst scenario, mst streams are from the same link_enc_hw_inst.
As the result, can't utilize that as the phy index for distinguising
different stream sinks.
[How]
Sort the connectors by:
link_enc_hw_instance->mst tree depth->mst RAD
After sorting the phy index assignment, store connector's relevant info
into dm mapping array. Once need the index, just look up the static
array.
Reviewed-by: HaoPing Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For mst streams under same topology, stream->link->link_enc_hw_inst are the same and
hence can't distinguish the crc window setting.
[How]
Firstly adjust dc_stream_forward_crc_window to accept assignment of phy_id. Follow up
another patch to determine the phy_id at dm layer.
Reviewed-by: HaoPing Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to avoid unnecessary asserts, one of which is hit in
dcn31_panel_construct when booting on a DCN32 asic that has an eDP
connector on a different DIG than A or B. The DIG-based mapping only
applies when edp0_on_dp1 is supported, therefore the check for valid
eng_id can be moved within the appropriate section of the if statement.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Expose DCN401 HUBP functions for use across other platforms.
[Description]
This change aims to make the DCN401 HUBP functions accessible for
enabling their use in future platform developments.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some of the firmware that is loaded by amdgpu is not actually required.
For example the ISP firmware on some SoCs is optional, and if it's not
present the ISP IP block just won't be initialized.
The firmware loader core however will show a warning when this happens
like this:
```
Direct firmware load for amdgpu/isp_4_1_0.bin failed with error -2
```
To avoid confusion for non-required firmware, adjust the amd-ucode helper
to take an extra argument indicating if the firmware is required or
optional.
On optional firmware use firmware_request_nowarn() instead of
request_firmware() to avoid the warnings.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/amd-gfx/df71d375-7abd-4b32-97ce-15e57846eed8@amd.com/T/#t
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When using a sw cursor and flip immediate, the plane that is flipping
immediately will do partial updates causing tearing.
When on certain displays, subvp is expected based on
timings but should be disabled in specific use cases that are not
accounted for.
[HOW]
This was fixed by improving the timings check by using the hw cursor
required flag to cover the unaccounted use cases.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Peterson <peterson.guo@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The existing changes to the DPMS off flag should help reduce
accidental entry, but this change further restricts the entry condition.
[How]
Record last power state as sent to DMUB.
Don't send IPS2 allow if it's D0.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Soft hang/lag observed during 10bit playback + moving cursor, corruption
observed in other tickets for same reason, also failing MPO.
1. Currently, we are always running
calculate_lowest_supported_state_for_temp_read which is only
necessary on dGPU
2. Fast validate path does not apply DET buffer allocation policy
3. Prefetch UrgBFactor chroma parameter not populated in prefetch
calculation
[HOW]
1. Add a check to see if we are on APU, if so, skip the code
2. Add det buffer alloc policy checks to fast validate path
3. Populate UrgentBurstChroma param in call to calculate
UrgBChroma prefetch values
-revision commits: small formatting/brackets/null check addition + remove test change + dGPU code
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Add hblank borrowing support
- Limit VTotal range to max hw cap minus fp
- Correct prefetch calculation
- Add option to retrieve detile buffer size
- Add support for custom recout_width in SPL
- Add disable_ips_in_dpms_off flag for IPS
- Enable EASF based on luma taps only
- Add a left edge pixel if in YCbCr422 or YCbCr420 and odm
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Add support for custom recout_width for mpc combine in SPL
[HOW]
1. Rename mpc_combine_h and mpc_combine_v
2. Add flag use_recout_width_aligned to use custom recout_width
3. Create union to use either mpc_num_h_slices or mpc_recout_width_align
Reviewed-by: Navid Assadian <navid.assadian@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
It's possible we still allow IPS2 when all streams are DPMS off but this
is unexpected.
[HOW]
Pass the DM config value into DC so it can use the pure stream count
to decide. We will be in 0 streams for S0i3 so this will still allow
it for D3.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
EASF only applies to luma. Previously both luma and chroma taps
were checked to determine whether to enable EASF.
[HOW]
Only check if luma taps are supported before determining whether
to enable EASF or not.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pass ip_block instead of adev in set_clockgating_state() callback
functions. Modify set_clockgating_state()for all correspoding ip blocks.
v2: remove all changes for is_idle(), remove type casting
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The v6.13-rc2 release included a bunch of breaking changes,
specifically the MODULE_IMPORT_NS commit.
Backmerge in order to fix them before the next pull-request.
Include the fix from Stephen Roswell.
Caused by commit
25c3fd1183 ("drm/virtio: Add a helper to map and note the dma addrs and lengths")
Interacting with commit
cdd30ebb1b ("module: Convert symbol namespace to string literal")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20241209121717.2abe8026@canb.auug.org.au
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
[WHY]
On some cards when odm is used, the monitor will have 2 separate pipes
split vertically. When compression is used on the YCbCr colour space on
the second pipe to have correct colours, we need to read a pixel from the
end of first pipe to accurately display colours. Hardware was programmed
properly to account for this extra pixel but it was not calculated
properly in software causing a split screen on some monitors.
[HOW]
The fix adjusts the second pipe's viewport and timings if the pixel
encoding is YCbCr422 or YCbCr420.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: George Shen <george.shen@amd.com>
Signed-off-by: Peterson Guo <peterson.guo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang on LoongArch (18+) appears to be unaffected by the bug causing
excessive stack usage in calculate_bandwidth(). But when building DC_FP
support the stack frame size can be as large as 2816 bytes, which causes
the FRAME_WARN build warnings. So on LoongArch we allow building DC with
clang, but disable DC_FP by default.
The help message is also updated.
Tested-by: Rui Wang <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses a null pointer dereference issue in
hwss_setup_dpp(). The issue could occur when pipe_ctx->plane_state is
null. The fix adds a check to ensure `pipe_ctx->plane_state` is not null
before accessing. This prevents a null pointer dereference.
Fixes: 0baae62463 ("drm/amd/display: Refactor fast update to use new HWSS build sequence")
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
