Xe3 is capable of switching automatically to min ddb allocation
(not using any extra blocks) or interim SAGV-adjusted allocation
in case if async flip is used. Introduce the minimum and interim
ddb allocation configuration for that purpose. Also i915 is
replaced with intel_display within the patch's context
v2: update min/interim ddb declarations and handling (Ville)
update to register definitions styling
consolidation of minimal wm0 check with min DDB check
Bspec: 69880, 72053
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241121112726.510220-4-vinod.govindapillai@intel.com
Future platforms can have new additions in the plane_wm
registers. So update skl_wm_level_from_reg_val() to have
possiblity for such platform differentiations. This is in
preparation for the rest of the patches in this series where
hw support for the minimum and interim ddb allocations for
async flip is added. Replace all the i915 uses to intel_display
in this function while updating this function
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241121112726.510220-2-vinod.govindapillai@intel.com
Increase the latency programmed into PKG_C_LATENCY latency to be
a multiple of line time which is written into WM_LINETIME.
--v2
-Fix commit subject line [Sai Teja]
-Use individual DISPLAY_VER checks instead of range [Sai Teja]
-Initialize max_linetime [Sai Teja]
--v3
-take into account the scenario when adjusted_latency is 0 [Vinod]
--v4
-rename adjusted_latency to latency [Mitul]
-fix the condition in which dpkgc is disabled [Vinod]
--v5
-Add check to see if max_linetime is 0 [Vinod]
--v6
-Avoid nested if statements [Mitul]
WA: 22020299601
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203084706.2126189-5-suraj.kandpal@intel.com
If the system boots with MBUS joining enabled but we disable
the relevant pipe during sanitation we later get into trouble
as the rest of the code doesn't expect MBUS joining to be
enabled unless the set of active pipes is in agreement.
We could relax some of the MBUS joining related checks during
normal atomic commits to let this slide, but that might also
let some real bugs through. So let's sanitize the MBUS joining
instead. And in order to keep things more or less in sync we'll
do the related credit, cdclk/mdclk ratio, etc. updates as well.
We'll stick to sturct drm_i915_private for now (instead of
struct intel_display) since the rest of the skl wm code does the
same, and we might need to bakport this.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241031155646.15165-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We'll be wanting to reprogram the PIPE_MBUS_DBOX_CTL registers
during an upcoming MBUS sanitation stage. Extract the reprogramming
loop into a helper that doesn't depend on the full atomic state
so that it can be reused.
We'll stick to sturct drm_i915_private for now (instead of
struct intel_display) since the rest of the skl wm code does the
same, and we might need to bakport this.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241031155646.15165-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use x100, or ver * 100 + rel, versions for full IP version checks,
similar to what xe driver does:
- Replace IP_VER(14, 1) inline with 1401, etc.
- Convert DISPLAY_VER_FULL() to DISPLAY_VERx100()
- Convert IS_DISPLAY_VER_FULL() to IS_DISPLAY_VERx100()
- Convert IS_DISPLAY_VER_STEP() to IS_DISPLAY_VERx100_STEP()
This makes ver.rel versions easier to use, follows the xe driver
pattern, and drops the dependency on the IP_VER() macro.
v2: Rebase, drop IP_VER() from xe compat headers
v3: Rebase
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029155536.753413-1-jani.nikula@intel.com
Use a forward declaration for struct cec_notifier instead of including
media/cec-notifier.h in intel_display_types.h, and only include it where
needed.
Also realize that a lot of places depend on including linux/debugfs.h
via intel_display_types.h -> media/cec-notifier.h -> media/cec.h, and
include that too where needed.
v2: hsw_ips.c also needs debugfs.h (kernel test robot)
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240827104521.4151471-1-jani.nikula@intel.com
Having the plane WM/DDB regitster write functions in skl_watermarks.c
is rather annoying when trying to implement DSB based plane updates.
Move them into the respective files that handle all other plane
register writes. Less places where I need to worry about the DSB
vs. MMIO decisions.
The downside is that we spread the wm struct details a bit further
afield. But if that becomes too annoying we can probably abstract
things a bit more with a few extra functions.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510152329.24098-17-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Get rid of skl_ddb_entry_write() and skl_write_wm_level() and
just call intel_de_write_fw() directly.
This is prep work towards DSB based plane updates where these
wrappers are more of a hinderance.
Done with cocci mostly:
@@
expression D, R, L;
@@
- skl_write_wm_level(D, R, L)
+ intel_de_write_fw(D, R, skl_plane_wm_reg_val(L))
@@
expression D, R, B;
@@
- skl_ddb_entry_write(D, R, B)
+ intel_de_write_fw(D, R, skl_plane_ddb_reg_val(B))
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510152329.24098-16-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Problem is that on some platforms, we do get QGV point mask in wrong
state on boot. However driver assumes it is set to 0
(i.e all points allowed), however in reality we might get them all
restricted, causing issues.
Lets disable SAGV initially to force proper QGV point state.
If more QGV points are available, driver will recalculate and update
those then after next commit.
v2: - Added trace to see which QGV/PSF GV point is used when SAGV is
disabled.
v3: - Move force disable function to intel_bw_init in order to initialize
bw state as well, so that hw/sw are immediately in sync after init.
v4: - Don't try sending PCode request, seems like it is not possible at
intel_bw_init, however assigning bw->state to be restricted as if
SAGV is off, still forces driveer to send PCode request anyway on
next modeset, so the solution still works.
However we still need to address the case, when no display is
connected, which anyway requires much more changes.
v5: - Put PCode request back and apply temporary hack to make the
request succeed(in case if there 2 PSF GV points with same BW, PCode
accepts only if both points are restricted/unrestricted same time)
- Fix argument sequence for adl_qgv_bw(Ville Syrjälä)
v6: - Fix wrong platform checks, not to break everything else.
v7: - Split the handling of quplicate QGV/PSF GV points (Vinod)
Restrict force disable to display version below 14 (Vinod)
v8: - Simplify icl_force_disable_sagv (Vinod)
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-5-vinod.govindapillai@intel.com
Currently we can't change MBUS join status without doing a modeset,
because we are lacking mechanism to synchronize those with vblank.
However then this means that we can't do a fastset, if there is a need
to change MBUS join state. Fix that by implementing such change.
We already call correspondent check and update at pre_plane dbuf update,
so the only thing left is to have a non-modeset version of that.
If active pipes stay the same then fastset is possible and only MBUS
join state/ddb allocation updates would be committed.
The full mbus/cdclk sequence will look as follows:
1. disable pipes
2. increase cdclk if necessary
2.1 reprogram cdclk
2.2 update dbuf tracker value
3. enable mbus joining if necessary
3.1 update mbus_ctl
3.2 update dbuf tracker value
4. reallocate dbuf for planes on active pipes
5. disable mbus joining if necessary
5.1 update dbuf tracker value
5.2 update mbus_ctl
6. enable pipes
7. decrease cdclk if necessary
7.1 update dbuf tracker value
7.2 reprogram cdclk
And in order to keep things in sync we need:
Step 2:
- mbus_join == old
- mdclk/cdclk ratio == new
Step 3:
- mbus_join == new
- mdclk/cdclk ratio == old when cdclk is changing in step 7
- mdclk/cdclk ratio == new when cdclk is changing in step 2
Step 5:
- mbus_join == new
- mdclk/cdclk ratio == old when cdclk is changing in step 7
- mdclk/cdclk ratio == new when cdclk is changing in step 2
Step 7:
- mbus_join == new
- mdclk/cdclk ratio == new
v2: - Removed redundant parentheses(Ville Syrjälä)
- Constified new_crtc_state in intel_mbus_joined_pipe(Ville Syrjälä)
- Removed pipe_select variable(Ville Syrjälä)
[v3: vsyrjala: Correctly sequence vs. cdclk updates,
properly describe the full sequence,
shuffle code around to make the diff more legible,
streamline a few things]
[v4: vsyrjala: Move the intel_cdclk_is_decreasing_later() stuff
to a separate patch]
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v3
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Co-developed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-13-ville.syrjala@linux.intel.com
The current cdclk/mbus programming sequence is as follows:
1. intel_set_cdclk_pre_plane_update()
2. update_mbus_pre_enable()
3. intel_set_cdclk_post_plane_update()
when the actual mdclk/cdclk programming is postponed to
intel_set_cdclk_post_plane_update() we must keep using
the old mdclk/cdclk ratio during update_mbus_pre_enable().
This guarantees the programmed ratio matches the rest of
the hardware state (mdlk/cdclk/mbus joining).
v2: Extracted from the vblank synchronized mbus programming patch
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-12-ville.syrjala@linux.intel.com
Commit 394b4b7df9 ("drm/i915/lnl: Add CDCLK table") and commit
3d3696c0fe ("drm/i915/lnl: Start using CDCLK through PLL") started
adding support for CDCLK programming support for Xe2LPD. One final piece
is missing, which is the programming necessary for changed in the ratio
between MDCLK and CDCLK. Let's do that now.
BSpec instructs us to update MBUS_CTL and DBUF_CTL_S* registers when the
ratio between MDCLK and CDCLK changes. The updates must be done before
changing the CDCLK when decreasing the frequency; or after it when
increasing the frequency.
Ratio-related updates to MBUS_CTL also depend on the state of MBus
joining, so they are performed by either CDCLK change sequence or by
changes in MBus joining. Since one might happen independently of the
other, we need to make sure that both logics see the necessary state
values when programming that register. MBus joining logic needs to know
the MDCLK:CDCLK ratio and that's already provided via mdclk_cdclk_ratio
field of struct intel_dbuf_state.
For the CDCLK logic, we need to have something similar: we need to
propagate the status of MBus joining to struct intel_cdclk_state. Do
that by adding the field joined_mbus to struct intel_cdclk_config.
(Preferably, that field would be added to intel_cdclk_state, however
currently only intel_cdclk_config is passed down to the functions that
do the register programming. We might revisit this decision if we find
that refactoring the code to pass the whole intel_cdclk_state is worth
it.)
Bspec: 68864, 68868, 69090, 69482
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312163639.172321-7-gustavo.sousa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Xe2LPD always selects the CDCLK PLL as source for the MDCLK. Because of
that, the ratio between MDCLK and CDCLK is not be constant anymore. As
such, make sure to have the current ratio available in intel_dbuf_state
so that it can be used during dbuf programming.
Note that we write-lock the global state instead of serializing to a
hardware commit because a change in the ratio should be rather handled
in the CDCLK change sequence, which will need to take care of updating
the necessary registers in that case. We will implement that in upcoming
changes.
That said, changes in the MBus joining state should be handled by the
DBUF/MBUS logic, just like it is already done, but the logic will need
to know the ratio to properly update the registers.
v2:
- Make first sentence of commit message more intelligible. (Matt)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312163639.172321-6-gustavo.sousa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
As of Xe2LPD, it is now possible to select the source of the MDCLK
as either the CD2XCLK or the CDCLK PLL.
Previous display IPs were hardcoded to use the CD2XCLK. For those, the
ratio between MDCLK and CDCLK remained constant, namely 2. For Xe2LPD,
when we select the CDCLK PLL as the source, the ratio will vary
according to the squashing configuration (since the cd2x divisor is
fixed for all supported configurations).
To help the transition to supporting changes in the ratio, extract the
function intel_dbuf_mdclk_cdclk_ratio_update() from the existing logic
and call it using 2 as hardcoded ratio. Upcoming changes will use that
function for updates in the ratio due to CDCLK changes.
Bspec: 50057, 69445, 49213, 68868
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312163639.172321-5-gustavo.sousa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
If fixed refresh rate program the PKGC_LATENCY register
with the highest latency from level 1 and above LP registers
and program ADDED_WAKE_TIME = DSB execution time.
else program PKGC_LATENCY with all 1's and ADDED_WAKE_TIME as 0.
This is used to improve package C residency by sending the highest
latency tolerance requirement (LTR) when the planes are done with the
frame until the next frame programming window (set context latency,
window 2) starts.
Bspec: 68986
--v2
-Fix indentation [Chaitanya]
--v3
-Take into account if fixed refrersh rate or not [Vinod]
-Added wake time dependengt on DSB execution time [Vinod]
-Use REG_FIELD_PREP [Jani]
-Call program_pkgc_latency from appropriate place [Jani]
-no need for the ~0 while setting max latency [Jani]
-change commit message to add the new changes made in.
--v4
-Remove extra blank line [Vinod]
-move the vrr.enable check to previous loop [Vinod]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219063638.1467114-1-suraj.kandpal@intel.com
