Virtual wide planes give high amount of flexibility, but it is not
always enough:
In parallel multirect case only the half of the usual width is supported
for tiled formats. Thus the whole width of two tiled multirect
rectangles can not be greater than max_linewidth, which is not enough
for some platforms/compositors.
Another example is as simple as wide YUV plane. YUV planes can not use
multirect, so currently they are limited to max_linewidth too.
Now that the planes are fully virtualized, add support for allocating
two SSPP blocks to drive a single DRM plane. This fixes both mentioned
cases and allows all planes to go up to 2*max_linewidth (at the cost of
making some of the planes unavailable to the user).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/629026/
Link: https://lore.kernel.org/r/20241215-dpu-virtual-wide-v8-2-65221f213ce1@linaro.org
Only several SSPP blocks support such features as YUV output or scaling,
thus different DRM planes have different features. Properly utilizing
all planes requires the attention of the compositor, who should
prefer simpler planes to YUV-supporting ones. Otherwise it is very easy
to end up in a situation when all featureful planes are already
allocated for simple windows, leaving no spare plane for YUV playback.
To solve this problem make all planes virtual. Each plane is registered
as if it supports all possible features, but then at the runtime during
the atomic_check phase the driver selects backing SSPP block for each
plane.
As the planes are attached to the CRTC and not the encoder, the SSPP
blocks are also allocated per CRTC ID (all other resources are currently
allocated per encoder ID). This also matches the hardware requirement,
where both rectangles of a single SSPP can only be used with the LM
pair.
Note, this does not provide support for using two different SSPP blocks
for a single plane or using two rectangles of an SSPP to drive two
planes. Each plane still gets its own SSPP and can utilize either a solo
rectangle or both multirect rectangles depending on the resolution.
Note #2: By default support for virtual planes is turned off and the
driver still uses old code path with preallocated SSPP block for each
plane. To enable virtual planes, pass 'msm.dpu_use_virtual_planes=1'
kernel parameter.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629022/
Link: https://lore.kernel.org/r/20241215-dpu-virtual-wide-v8-1-65221f213ce1@linaro.org
dp_ctrl_off_link() was created to handle a case where we received
a cable connect and then get a cable disconnect without the corresponding
dp_display_enable(). For such cases the pixel clock will be off but the
link clock will still be on. dp_ctrl_off_link() handles this case by
turning off the link clock only.
However, the vote removal to the opp table for this case was missed.
Remove the opp table vote in dp_ctrl_off_link().
Fixes: 375a126090 ("drm/msm/dp: tear down main link at unplug handle immediately")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/627487/
Link: https://lore.kernel.org/r/20241205-dp_mst-v1-2-f8618d42a99a@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
MMSS_DP_INTF_CONFIG has already been setup by the main datapath
for DP to account for widebus to be used/unused etc.
In current implementation, TPG only switches the DP controller
to use the main datapath stream OR use the test pattern but expects
the rest of the controller to be already setup.
Keeping the same behavior intact, drop the clearing of MMSS_DP_INTF_CONFIG
from the msm_dp_catalog_panel_tpg_enable() API.
Fixes: 757a2f36ab ("drm/msm/dp: enable widebus feature for display port")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/626888/
Link: https://lore.kernel.org/r/20241202-tpg-v1-2-0fd6b518b914@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
The v6.13-rc2 release included a bunch of breaking changes,
specifically the MODULE_IMPORT_NS commit.
Backmerge in order to fix them before the next pull-request.
Include the fix from Stephen Roswell.
Caused by commit
25c3fd1183 ("drm/virtio: Add a helper to map and note the dma addrs and lengths")
Interacting with commit
cdd30ebb1b ("module: Convert symbol namespace to string literal")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20241209121717.2abe8026@canb.auug.org.au
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
The msm_dp_utils_pack_sdp_header() accepts an unlimited-size u32 pointer
for the header output, while it expects a two-element array. It performs
a sizeof check which is always true on 64-bit platforms (since
sizeof(u32*) is 8) and is always false on 32-bit platforms. It returns
an error code which nobody actually checks.
Fix the function interface to accept u32[2] and return void, skipping
all the checks.
Fixes: 55fb8ffc18 ("drm/msm/dp: add VSC SDP support for YUV420 over DP")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/626806/
Link: https://lore.kernel.org/r/20241202-fd-dp-audio-fixup-v2-2-d9187ea96dad@linaro.org
[quic_abhinavk@quicinc.com: minor fix in the commit message]
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull drm updates from Dave Airlie:
"There's a lot of rework, the panic helper support is being added to
more drivers, v3d gets support for HW superpages, scheduler
documentation, drm client and video aperture reworks, some new
MAINTAINERS added, amdgpu has the usual lots of IP refactors, Intel
has some Pantherlake enablement and xe is getting some SRIOV bits, but
just lots of stuff everywhere.
core:
- split DSC helpers from DP helpers
- clang build fixes for drm/mm test
- drop simple pipeline support for gem vram
- document submission error signaling
- move drm_rect to drm core module from kms helper
- add default client setup to most drivers
- move to video aperture helpers instead of drm ones
tests:
- new framebuffer tests
ttm:
- remove swapped and pinned BOs from TTM lru
panic:
- fix uninit spinlock
- add ABGR2101010 support
bridge:
- add TI TDP158 support
- use standard PM OPS
dma-fence:
- use read_trylock instead of read_lock to help lockdep
scheduler:
- add errno to sched start to report different errors
- add locking to drm_sched_entity_modify_sched
- improve documentation
xe:
- add drm_line_printer
- lots of refactoring
- Enable Xe2 + PES disaggregation
- add new ARL PCI ID
- SRIOV development work
- fix exec unnecessary implicit fence
- define and parse OA sync props
- forcewake refactoring
i915:
- Enable BMG/LNL ultra joiner
- Enable 10bpx + CCS scanout on ICL+, fp16/CCS on TGL+
- use DSB for plane/color mgmt
- Arrow lake PCI IDs
- lots of i915/xe display refactoring
- enable PXP GuC autoteardown
- Pantherlake (PTL) Xe3 LPD display enablement
- Allow fastset HDR infoframe changes
- write DP source OUI for non-eDP sinks
- share PCI IDs between i915 and xe
amdgpu:
- SDMA queue reset support
- SMU 13.0.6, JPEG 4.0.3 updates
- Initial runtime repartitioning support
- rework IP structs for multiple IP instances
- Fetch EDID from _DDC if available
- SMU13 zero rpm user control
- lots of fixes/cleanups
amdkfd:
- Increase event FIFO size
- add topology cap flag for per queue reset
msm:
- DPU:
- SA8775P support
- (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996 support
- Enable large framebuffer support
- Drop MSM8998 and SDM845
- DP:
- SA8775P support
- GPU:
- a7xx preemption support
- Adreno A663 support
ast:
- warn about unsupported TX chips
ivpu:
- add coredump
- add pantherlake support
rockchip:
- 4K@60Hz display enablement
- generate pll programming tables
panthor:
- add timestamp query API
- add realtime group priority
- add fdinfo support
etnaviv:
- improve handling of DMA address limits
- improve GPU hangcheck
exynos:
- Decon Exynos7870 support
mediatek:
- add OF graph support
omap:
- locking fixes
bochs:
- convert to gem/shmem from simpledrm
v3d:
- support big/super pages
- add gemfs
vc4:
- BCM2712 support refactoring
- add YUV444 format support
udmabuf:
- folio related fixes
nouveau:
- add panic support on nv50+"
* tag 'drm-next-2024-11-21' of https://gitlab.freedesktop.org/drm/kernel: (1583 commits)
drm/xe/guc: Fix dereference before NULL check
drm/amd: Fix initialization mistake for NBIO 7.7.0
Revert "drm/amd/display: parse umc_info or vram_info based on ASIC"
drm/amd/display: Fix failure to read vram info due to static BP_RESULT
drm/amdgpu: enable GTT fallback handling for dGPUs only
drm/amd/amdgpu: limit single process inside MES
drm/fourcc: add AMD_FMT_MOD_TILE_GFX9_4K_D_X
drm/amdgpu/mes12: correct kiq unmap latency
drm/amdgpu: Support vcn and jpeg error info parsing
drm/amd : Update MES API header file for v11 & v12
drm/amd/amdkfd: add/remove kfd queues on start/stop KFD scheduling
drm/amdkfd: change kfd process kref count at creation
drm/amdgpu: Cleanup shift coding style
drm/amd/amdgpu: Increase MES log buffer to dump mes scratch data
drm/amdgpu: Implement virt req_ras_err_count
drm/amdgpu: VF Query RAS Caps from Host if supported
drm/amdgpu: Add msg handlers for SRIOV RAS Telemetry
drm/amdgpu: Update SRIOV Exchange Headers for RAS Telemetry Support
drm/amd/display: 3.2.309
drm/amd/display: Adjust VSDB parser for replay feature
...
A few more Qualcomm driver updates for v6.13
Make the Adreno driver invoke the SMMU aperture setup firmware function,
which is required to allow the GPU to manage per-process page tables in
some firmware versions - as an example Rb3Gen2 has no GPU without this.
Add X1E Devkit to the list of devices that has functional EFI variable
access through the uefisecapp.
Flip the "manual slice configuration quirk" in the Qualcomm LLCC driver,
as this only applies to a single platform, and introduce support for
QCS8300, QCS615, SAR2130P, and SAR1130P.
Lastly, add IPQ5424 and IPQ5404 to the Qualcomm socinfo driver.
* tag 'qcom-drivers-for-6.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: ice: Remove the device_link field in qcom_ice
drm/msm/adreno: Setup SMMU aparture for per-process page table
firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID
soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
soc: qcom: llcc: Flip the manual slice configuration condition
dt-bindings: firmware: qcom,scm: Document sm8750 SCM
firmware: qcom: uefisecapp: Allow X1E Devkit devices
soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
soc: qcom: llcc: Add configuration data for QCS615
dt-bindings: cache: qcom,llcc: Document the QCS615 LLCC
soc: qcom: llcc: add support for SAR2130P and SAR1130P
soc: qcom: llcc: use deciman integers for bit shift values
dt-bindings: cache: qcom,llcc: document SAR2130P and SAR1130P
Link: https://lore.kernel.org/r/20241113032425.356306-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Support for per-process page tables requires the SMMU aparture to be
setup such that the GPU can make updates with the SMMU. On some targets
this is done statically in firmware, on others it's expected to be
requested in runtime by the driver, through a SCM call.
One place where configuration is expected to be done dynamically is the
QCS6490 rb3gen2.
The downstream driver does this unconditioanlly on any A6xx and newer,
so follow suite and make the call.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/r/20241110-adreno-smmu-aparture-v2-2-9b1fb2ee41d4@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There may be a potential integer overflow issue in
_dpu_core_perf_calc_clk(). crtc_clk is defined as u64, while
mode->vtotal, mode->hdisplay, and drm_mode_vrefresh(mode) are defined as
a smaller data type. The result of the calculation will be limited to
"int" in this case without correct casting. In screen with high
resolution and high refresh rate, integer overflow may happen.
So, we recommend adding an extra cast to prevent potential
integer overflow.
Fixes: c33b7c0389 ("drm/msm/dpu: add support for clk and bw scaling for display")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/622206/
Link: https://lore.kernel.org/r/20241029194209.23684-1-zichenxie0106@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
