Pull networking fixes from Jakub Kicinski:
"Including fixes from IPSec, netfilter and Bluetooth.
Nothing really stands out, but as usual there's a slight concentration
of fixes for issues added in the last two weeks before the merge
window, and driver bugs from 6.13 which tend to get discovered upon
wider distribution.
Current release - regressions:
- net: revert RTNL changes in unregister_netdevice_many_notify()
- Bluetooth: fix possible infinite recursion of btusb_reset
- eth: adjust locking in some old drivers which protect their state
with spinlocks to avoid sleeping in atomic; core protects netdev
state with a mutex now
Previous releases - regressions:
- eth:
- mlx5e: make sure we pass node ID, not CPU ID to kvzalloc_node()
- bgmac: reduce max frame size to support just 1500 bytes; the
jumbo frame support would previously cause OOB writes, but now
fails outright
- mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted, avoid
false detection of MPTCP blackholing
Previous releases - always broken:
- mptcp: handle fastopen disconnect correctly
- xfrm:
- make sure skb->sk is a full sock before accessing its fields
- fix taking a lock with preempt disabled for RT kernels
- usb: ipheth: improve safety of packet metadata parsing; prevent
potential OOB accesses
- eth: renesas: fix missing rtnl lock in suspend/resume path"
* tag 'net-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
MAINTAINERS: add Neal to TCP maintainers
net: revert RTNL changes in unregister_netdevice_many_notify()
net: hsr: fix fill_frame_info() regression vs VLAN packets
doc: mptcp: sysctl: blackhole_timeout is per-netns
mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted
netfilter: nf_tables: reject mismatching sum of field_len with set key length
net: sh_eth: Fix missing rtnl lock in suspend/resume path
net: ravb: Fix missing rtnl lock in suspend/resume path
selftests/net: Add test for loading devbound XDP program in generic mode
net: xdp: Disallow attaching device-bound programs in generic mode
tcp: correct handling of extreme memory squeeze
bgmac: reduce max frame size to support just MTU 1500
vsock/test: Add test for connect() retries
vsock/test: Add test for UAF due to socket unbinding
vsock/test: Introduce vsock_connect_fd()
vsock/test: Introduce vsock_bind()
vsock: Allow retrying on connect() failure
vsock: Keep the binding until socket destruction
Bluetooth: L2CAP: accept zero as a special value for MTU auto-selection
Bluetooth: btnxpuart: Fix glitches seen in dual A2DP streaming
...
Pull driver core and debugfs updates from Greg KH:
"Here is the big set of driver core and debugfs updates for 6.14-rc1.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at
least one user that does have a regression with these, but Al is
working on tracking down the fix for it. In my use (and everyone
else's linux-next use), it does not seem like a big issue at the
moment.
Here's a short list of the things in here:
- driver core rust bindings for PCI, platform, OF, and some i/o
functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing
things in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon""
* tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
rust: device: Use as_char_ptr() to avoid explicit cast
rust: device: Replace CString with CStr in property_present()
devcoredump: Constify 'struct bin_attribute'
devcoredump: Define 'struct bin_attribute' through macro
rust: device: Add property_present()
saner replacement for debugfs_rename()
orangefs-debugfs: don't mess with ->d_name
octeontx2: don't mess with ->d_parent or ->d_parent->d_name
arm_scmi: don't mess with ->d_parent->d_name
slub: don't mess with ->d_name
sof-client-ipc-flood-test: don't mess with ->d_name
qat: don't mess with ->d_name
xhci: don't mess with ->d_iname
mtu3: don't mess wiht ->d_iname
greybus/camera - stop messing with ->d_iname
mediatek: stop messing with ->d_iname
netdevsim: don't embed file_operations into your structs
b43legacy: make use of debugfs_get_aux()
b43: stop embedding struct file_operations into their objects
carl9170: stop embedding file_operations into their objects
...
Add EEE support for mvpp2, using phylink's EEE implementation, which
means we just need to implement the two methods for LPI control, and
with the initial configuration. Only SGMII mode is supported, so only
100M and 1G speeds.
Disabling LPI requires clearing a single bit. Enabling LPI needs a full
configuration of several values, as the timer values are dependent on
the MAC operating speed.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYAE0-0014Pz-R9@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert mvneta to use phylink's EEE implementation by implementing the
two LPI control methods, and adding the initial configuration and
capabilities.
Although disabling LPI requires clearing a single bit, for safety we
clear the manual mode and force bits to ensure that auto mode will be
used.
Enabling LPI needs a full configuration of several values, as the timer
values are dependent on the MAC operating speed, as per the original
code.
As Armada 388 states that EEE is only supported in "SGMII" modes, mark
this in lpi_interfaces. Testing with RGMII on the Clearfog platform
indicates that the receive path fails to detect LPI over RGMII.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYADv-0014Pt-NO@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wrap napi_enable() / napi_disable() with netdev_lock().
Provide the "already locked" flavor of the API.
iavf needs the usual adjustment. A number of drivers call
napi_enable() under a spin lock, so they have to be modified
to take netdev_lock() first, then spin lock then call
napi_enable_locked().
Protecting napi_enable() implies that napi->napi_id is protected
by netdev_lock().
Acked-by: Francois Romieu <romieu@fr.zoreil.com> # via-velocity
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Existing primitive has several problems:
1) calling conventions are clumsy - it returns a dentry reference
that is either identical to its second argument or is an ERR_PTR(-E...);
in both cases no refcount changes happen. Inconvenient for users and
bug-prone; it would be better to have it return 0 on success and -E... on
failure.
2) it allows cross-directory moves; however, no such caller have
ever materialized and considering the way debugfs is used, it's unlikely
to happen in the future. What's more, any such caller would have fun
issues to deal with wrt interplay with recursive removal. It also makes
the calling conventions clumsier...
3) tautological rename fails; the callers have no race-free way
to deal with that.
4) new name must have been formed by the caller; quite a few
callers have it done by sprintf/kasprintf/etc., ending up with considerable
boilerplate.
Proposed replacement: int debugfs_change_name(dentry, fmt, ...). All callers
convert to that easily, and it's simpler internally.
IMO debugfs_rename() should go; if we ever get a real-world use case for
cross-directory moves in debugfs, we can always look into the right way
to handle that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20250112080705.141166-21-viro@zeniv.linux.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Every case in the switch-block ends with return statement, and the
default: branch handles the cases where rsrc_type is invalid and
returns "Unknown", this makes the return statement at the end of the
function unreachable and redundant.
The semi-colon is not required after the switch-block's curly braces.
Remove the semi-colon after the switch-block's curly braces and the
return statement at the end of the function.
This issue was reported by Coverity Scan.
Signed-off-by: Nihar Chaithanya <niharchaithanya@gmail.com>
Link: https://patch.msgid.link/20250104171905.13293-1-niharchaithanya@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current implementation of mv643xx_eth_shared_of_add_port() calls
of_parse_phandle(), but does not release the refcount on error. Call
of_node_put() in the error path and in mv643xx_eth_shared_of_remove().
This bug was found by an experimental verification tool that I am
developing.
Fixes: 76723bca28 ("net: mv643xx_eth: add DT parsing support")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://patch.msgid.link/20241221081448.3313163-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When DCB is disabled, the pfc_en struct member cannot be accessed:
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c: In function 'otx2_is_pfc_enabled':
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c:22:48: error: 'struct otx2_nic' has no member named 'pfc_en'
22 | return IS_ENABLED(CONFIG_DCB) && !!pfvf->pfc_en;
| ^~
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c: In function 'otx2_nix_config_bp':
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c:1755:33: error: 'IEEE_8021QAZ_MAX_TCS' undeclared (first use in this function)
1755 | req->chan_cnt = IEEE_8021QAZ_MAX_TCS;
| ^~~~~~~~~~~~~~~~~~~~
Move the member out of the #ifdef block to avoid putting back another
check in the source file and add the missing include file unconditionally.
Fixes: a7ef63dbd5 ("octeontx2-af: Disable backpressure between CPT and NIX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241213083228.2645757-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hardware is initialized and netdev transmit flow is
hooked up for outbound ipsec crypto offload, so finally
enable ipsec offload.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow to use hardware offload for outbound ipsec crypto
mode if security association (SA) is set for a given skb.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prepare and submit crypto hardware (CPT) instruction for
outbound ipsec crypto offload. The CPT instruction have
authentication offset, IV offset and encapsulation offset
in input packet. Also provide SA context pointer which have
details about algo, keys, salt etc. Crypto hardware encrypt,
authenticate and provide the ESP packet to networking hardware.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support to add and delete Security Association
(SA) xfrm ops. Hardware maintains SA context in memory allocated
by software. Each SA context is 128 byte aligned and size of
each context is multiple of 128-byte. Add support for transport
and tunnel ipsec mode, ESP protocol, aead aes-gcm-icv16, key size
128/192/256-bits with 32bit salt.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One crypto hardware logical function (cpt-lf) per netdev is
required for outbound ipsec crypto offload. Allocate, attach
and initialize one crypto hardware function when enabling
outbound ipsec crypto offload. Crypto hardware function will
be detached and freed on disabling outbound ipsec crypto
offload.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NIX can assert backpressure to CPT on the NIX<=>CPT link.
Keep the backpressure disabled for now. NIX block anyways
handles backpressure asserted by MAC due to PFC or flow
control pkts.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move skb fragment map/unmap function to common file
so as to reuse same for outbound IPsec crypto offload
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Crypto hardware need write permission for in-place encrypt
or decrypt operation on skb-data to support IPsec crypto
offload. That patch uses skb_unshare to make skb data writeable
for ipsec crypto offload and map skb fragment memory as
device read-write.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current driver allows only packet size < 512B as SDP_LINK_CREDIT
register is set to default value.
This patch fixes this issue by configure the register with
maximum HW supported value to allow packet size > 512B.
Fixes: 2f7f33a095 ("octeontx2-pf: Add representors for sdp MAC")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During initialization, the AF driver resets all blocks. The RPM (MAC)
block and NIX block operate on a credit-based model. When the NIX block
resets during active traffic flow, it doesn't release credits to the RPM
block. This causes the RPM FIFO to overflow, leading to receive traffic
struck.
To address this issue, the patch introduces the following changes:
1. Stop receiving traffic at the MAC level during AF driver
initialization.
2. Perform an X2P reset (prevents RXFIFO of all LMACS from pushing data)
3. Reset the NIX block.
4. Clear the X2P reset and re-enable receiving traffic.
Fixes: 54d557815e ("octeontx2-af: Reset all RVU blocks")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The corrected words register(FCFECX_VL0_CCW_LO)/Uncorrected words
register (FCFECX_VL0_NCCW_LO) of FCFEC counter has different LMAC
offset which needs to be accessed differently.
Fixes: 84ad364211 ("octeontx2-af: Add FEC stats for RPM/RPM_USX block")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The earlier patch sets the 'Stats control register' for RPM
receive/transmit statistics instead of RSFEC statistics,
causing the driver to return stale FEC counters.
Fixes: 84ad364211 ("octeontx2-af: Add FEC stats for RPM/RPM_USX block")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Low network performance is observed even on RPMs with larger
FIFO lengths.
The cn10kb silicon has three RPM blocks with the following
FIFO sizes:
--------------------
| RPM0 | 256KB |
| RPM1 | 256KB |
| RPM2 | 128KB |
--------------------
The current design stores the FIFO length in a common structure for all
RPMs (mac_ops). As a result, the FIFO length of the last RPM is applied
to all RPMs, leading to reduced network performance.
This patch resolved the problem by storing the fifo length in per MAC
structure (cgx).
Fixes: b9d0fedc62 ("octeontx2-af: cn10kb: Add RPM_USX MAC support")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Due to a bug in the previous patch, there is a mismatch
between the lmac type reported by the driver and the actual
hardware configuration.
Fixes: 3ad3f8f93c ("octeontx2-af: cn10k: MAC internal loopback support")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If the clock pep->clk was not enabled in pxa168_eth_probe,
it should not be disabled in any path.
Conversely, if it was enabled in pxa168_eth_probe, it must be disabled
in all error paths to ensure proper cleanup.
Use the devm_clk_get_enabled helper function to ensure proper call balance
for pep->clk.
Found by Linux Verification Center (linuxtesting.org) with Klever.
Fixes: a49f37eed2 ("net: add Fast Ethernet driver for PXA168.")
Signed-off-by: Vitalii Mordan <mordan@ispras.ru>
Link: https://patch.msgid.link/20241121200658.2203871-1-mordan@ispras.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implements tc offload support for rvu representors.
Usage example:
- Add tc rule to drop packets with vlan id 3 using port
representor(Rpf1vf0).
# tc filter add dev Rpf1vf0 protocol 802.1Q parent ffff: flower
vlan_id 3 vlan_ethtype ipv4 skip_sw action drop
- Redirect packets with vlan id 5 and IPv4 packets to eth1,
after stripping vlan header.
# tc filter add dev Rpf1vf0 ingress protocol 802.1Q flower vlan_id 5
vlan_ethtype ipv4 skip_sw action vlan pop action mirred ingress
redirect dev eth1
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the offload stat ndo by fetching the HW stats
of rx/tx queues attached to the representor.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hardware supports different types of MACs eg RPM, SDP, LBK.
LBK is for internal Tx->Rx HW loopback path. RPM and SDP MACs support
ingress/egress pkt IO on interfaces with different set of capabilities
like interface modes. At the time of netdev driver registration PF will
seek MAC related information from Admin function driver
'drivers/net/ethernet/marvell/octeontx2/af' and sets up ingress/egress
queues etc such that pkt IO on the channels of these different MACs is
possible. This patch add representors for SDP MAC.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adds support to manage the mtu configuration for VF through representor.
On update of representor mtu a mbox notification is send
to VF to update its mtu.
This feature is implemented based on the "Network Function Representors"
kernel documentation.
"
Setting an MTU on the representor should cause that same MTU
to be reported to the representee.
"
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
