Update our memcmp selftest, to test the case where we're comparing up
to the end of a page and the subsequent page is not mapped. We have to
make sure we don't read off the end of the page and cause a fault.
We had a bug there in the past, fixed in commit
d947075739 ("powerpc/64: Fix memcmp reading past the end of src/dest").
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722055315.962391-1-mpe@ellerman.id.au
ISA v3.1 does not support the SAO storage control attribute required to
implement PROT_SAO. PROT_SAO was used by specialised system software
(Lx86) that has been discontinued for about 7 years, and is not thought
to be used elsewhere, so removal should not cause problems.
We rather remove it than keep support for older processors, because
live migrating guest partitions to newer processors may not be possible
if SAO is in use (or worse allowed with silent races).
- PROT_SAO stays in the uapi header so code using it would still build.
- arch_validate_prot() is removed, the generic version rejects PROT_SAO
so applications would get a failure at mmap() time.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Drop KVM change for the time being]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703011958.1166620-3-npiggin@gmail.com
The per_event_excludes test wants to run on Power8 or later. But
currently it checks that AT_BASE_PLATFORM *equals* power8, which means
it only runs on Power8.
Fix it to check for the ISA 2.07 feature, which will be set on Power8
and later CPUs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200716122142.3776261-1-mpe@ellerman.id.au
ERR_NX_TRANSLATION(CSB.CC=5) is for internal to VAS for fault handling
and should not used by OS. ERR_NX_AT_FAULT(CSB.CC=250) is the proper
error code should be reported by OS when NX encounters address
translation failure.
This patch uses CC=250 to determine the fault address when the request
is not successful.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0315251705baff94f678c33178491b5008723511.camel@linux.ibm.com
An extra count on ebb_state.stats.pmc_count[PMC_INDEX(pmc)] is being per-
formed when count_pmc() is used to reset PMCs on a few selftests. This
extra pmc_count can occasionally invalidate results, such as the ones from
cycles_test shown hereafter. The ebb_check_count() failed with an above
the upper limit error due to the extra value on ebb_state.stats.pmc_count.
Furthermore, this extra count is also indicated by extra PMC1 trace_log on
the output of the cycle test (as well as on pmc56_overflow_test):
==========
...
[21]: counter = 8
[22]: register SPRN_MMCR0 = 0x0000000080000080
[23]: register SPRN_PMC1 = 0x0000000080000004
[24]: counter = 9
[25]: register SPRN_MMCR0 = 0x0000000080000080
[26]: register SPRN_PMC1 = 0x0000000080000004
[27]: counter = 10
[28]: register SPRN_MMCR0 = 0x0000000080000080
[29]: register SPRN_PMC1 = 0x0000000080000004
>> [30]: register SPRN_PMC1 = 0x000000004000051e
PMC1 count (0x280000546) above upper limit 0x2800003e8 (+0x15e)
[FAIL] Test FAILED on line 52
failure: cycles
==========
Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200626164737.21943-1-desnesn@linux.ibm.com
The Power ISA mandates that all writes to the Authority
Mask Register (AMR) must always be preceded as well as
succeeded by a context synchronizing instruction.
This makes sure that the tests follow this requirement
when attempting to update a pkey's access rights.
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200604125610.649668-2-sandipan@linux.ibm.com
We use OUTPUT directory as TMPOUT for checking no-pie option.
Since commit f2f02ebd8f ("kbuild: improve cc-option to clean up all
temporary files") when building powerpc/ from selftests directory, the
OUTPUT directory points to powerpc/pmu/ebb/ and gets removed when
checking for -no-pie option in try-run routine, subsequently build
fails with the following:
$ make -C powerpc
...
TARGET=ebb; BUILD_TARGET=$OUTPUT/$TARGET; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C $TARGET all
make[2]: Entering directory '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb'
make[2]: *** No rule to make target 'Makefile'.
make[2]: Failed to remake makefile 'Makefile'.
make[2]: *** No rule to make target 'ebb.c', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'ebb_handler.S', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'trace.c', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'busy_loop.S', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: Target 'all' not remade because of errors.
Fix this by adding a suffix to the OUTPUT directory so that the
failure is avoided.
Fixes: 9686813f6e ("selftests/powerpc: Fix try-run when source tree is not writable")
Signed-off-by: Harish <harish@linux.ibm.com>
[mpe: Mention that commit that triggered the breakage]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200625165721.264904-1-harish@linux.ibm.com
Extend the alignment handler selftest to exercise prefixed load store
instructions. Add tests for prefixed VSX, floating point and integer
instructions.
Skip prefix tests if ISA version does not support prefixed instructions.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Tested-by: Alistair Popple <alistair@popple.id.au>
[mpe: Fixup PPC_FEATURE2_ARCH_3_1 naming as noted by Alistair]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200520021103.19798-2-jniethe5@gmail.com
The alignment handler selftest needs cache-inhibited memory and
currently /dev/fb0 is relied on to provided this. This prevents running
the test on systems without /dev/fb0 (e.g., mambo). Read the commandline
arguments for an optional path to be used instead, as well as an
optional offset to be for mmaping this path.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Tested-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200520021103.19798-1-jniethe5@gmail.com
This is based on the count_instructions test.
However this one also counts the number of failed stcx's, and in
conjunction with knowing the size of the stcx loop, can calculate the
total number of instructions executed even in the face of
non-deterministic stcx failures.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200426114410.3917383-1-mpe@ellerman.id.au
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200507185755.GA15014@embeddedor
It's not very nice to zero trap for this, because then system calls no
longer have trap_is_syscall(regs) invariant, and we can't distinguish
between sc and scv system calls (in a later patch).
Take one last unused bit from the low bits of the pt_regs.trap word
for this instead. There is not a really good reason why it should be
in trap as opposed to another field, but trap has some concept of
flags and it exists. Ideally I think we would move trap to 2-byte
field and have 2 more bytes available independently.
Add a selftests case for this, which can be seen to fail if
trap_norestart() is changed to return false.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Make them static inlines]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200507121332.2233629-4-mpe@ellerman.id.au
Pull more powerpc updates from Michael Ellerman:
"The bulk of this is the series to make CONFIG_COMPAT user-selectable,
it's been around for a long time but was blocked behind the
syscall-in-C series.
Plus there's also a few fixes and other minor things.
Summary:
- A fix for a crash in machine check handling on pseries (ie. guests)
- A small series to make it possible to disable CONFIG_COMPAT, and
turn it off by default for ppc64le where it's not used.
- A few other miscellaneous fixes and small improvements.
Thanks to: Alexey Kardashevskiy, Anju T Sudhakar, Arnd Bergmann,
Christophe Leroy, Dan Carpenter, Ganesh Goudar, Geert Uytterhoeven,
Geoff Levand, Mahesh Salgaonkar, Markus Elfring, Michal Suchanek,
Nicholas Piggin, Stephen Boyd, Wen Xiong"
* tag 'powerpc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Always build the tm-poison test 64-bit
powerpc: Improve ppc_save_regs()
Revert "powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled"
powerpc/time: Replace <linux/clk-provider.h> by <linux/of_clk.h>
powerpc/pseries/ddw: Extend upper limit for huge DMA window for persistent memory
powerpc/perf: split callchain.c by bitness
powerpc/64: Make COMPAT user-selectable disabled on littleendian by default.
powerpc/64: make buildable without CONFIG_COMPAT
powerpc/perf: consolidate valid_user_sp -> invalid_user_sp
powerpc/perf: consolidate read_user_stack_32
powerpc: move common register copy functions from signal_32.c to signal.c
powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro
powerpc/ps3: Set CONFIG_UEVENT_HELPER=y in ps3_defconfig
powerpc/ps3: Remove an unneeded NULL check
powerpc/ps3: Remove duplicate error message
powerpc/powernv: Re-enable imc trace-mode in kernel
powerpc/perf: Implement a global lock to avoid races between trace, core and thread imc events.
powerpc/pseries: Fix MCE handling on pseries
selftests/eeh: Skip ahci adapters
powerpc/64s: Fix doorbell wakeup msgclr optimisation
Pull powerpc updates from Michael Ellerman:
"Slightly late as I had to rebase mid-week to insert a bug fix:
- A large series from Nick for 64-bit to further rework our exception
vectors, and rewrite portions of the syscall entry/exit and
interrupt return in C. The result is much easier to follow code
that is also faster in general.
- Cleanup of our ptrace code to split various parts out that had
become badly intertwined with #ifdefs over the years.
- Changes to our NUMA setup under the PowerVM hypervisor which should
hopefully avoid non-sensical topologies which can lead to warnings
from the workqueue code and other problems.
- MAINTAINERS updates to remove some of our old orphan entries and
update the status of others.
- Quite a few other small changes and fixes all over the map.
Thanks to: Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew
Donnellan, Aneesh Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen
Zhou, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Clement
Courbet, Daniel Axtens, David Gibson, Douglas Miller, Fabiano Rosas,
Fangrui Song, Ganesh Goudar, Gautham R. Shenoy, Greg Kroah-Hartman,
Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie Halip, Jan Kara,
Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger, Laurentiu Tudor,
Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh Salgaonkar,
Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira, Michael
Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick
Desaulniers, Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat,
Rasmus Villemoes, Ravi Bangoria, Roman Bolshakov, Sam Bobroff,
Sandipan Das, Santosh S, Sedat Dilek, Segher Boessenkool, Shilpasri G
Bhat, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Tyrel
Datwyler, Vaibhav Jain, YueHaibing"
* tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits)
powerpc: Make setjmp/longjmp signature standard
powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_type
powerpc: Suppress .eh_frame generation
powerpc: Drop -fno-dwarf2-cfi-asm
powerpc/32: drop unused ISA_DMA_THRESHOLD
powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces
selftests/powerpc: Fix try-run when source tree is not writable
powerpc/vmlinux.lds: Explicitly retain .gnu.hash
powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c
powerpc/ptrace: create ppc_gethwdinfo()
powerpc/ptrace: create ptrace_get_debugreg()
powerpc/ptrace: split out ADV_DEBUG_REGS related functions.
powerpc/ptrace: move register viewing functions out of ptrace.c
powerpc/ptrace: split out TRANSACTIONAL_MEM related functions.
powerpc/ptrace: split out SPE related functions.
powerpc/ptrace: split out ALTIVEC related functions.
powerpc/ptrace: split out VSX related functions.
powerpc/ptrace: drop PARAMETER_SAVE_AREA_OFFSET
powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64
powerpc/ptrace: remove unused header includes
...
The tm-poison test includes inline asm which is 64-bit only, so the
test must be built 64-bit in order to work.
Otherwise it fails, eg:
# file tm-poison
tm-poison: ELF 32-bit MSB executable, PowerPC or cisco 4500, version 1 (SYSV) ...
# ./tm-poison
test: tm_poison_test
Unknown value 0x1fff71150 leaked into f31!
Unknown value 0x1fff710c0 leaked into vr31!
failure: tm_poison_test
Fixes: a003365cab ("powerpc/tm: Add tm-poison test")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200403095656.3772005-1-mpe@ellerman.id.au
We added a usage of try-run to pmu/ebb/Makefile to detect if the
toolchain supported the -no-pie option.
This fails if we build out-of-tree and the source tree is not
writable, as try-run tries to write its temporary files to the current
directory. That leads to the -no-pie option being silently dropped,
which leads to broken executables with some toolchains.
If we remove the redirect to /dev/null in try-run, we see the error:
make[3]: Entering directory '/linux/tools/testing/selftests/powerpc/pmu/ebb'
/usr/bin/ld: cannot open output file .54.tmp: Read-only file system
collect2: error: ld returned 1 exit status
make[3]: Nothing to be done for 'all'.
And looking with strace we see it's trying to use a file that's in the
source tree:
lstat("/linux/tools/testing/selftests/powerpc/pmu/ebb/.54.tmp", 0x7ffffc0f83c8)
We can fix it by setting TMPOUT to point to the $(OUTPUT) directory,
and we can verify with strace it's now trying to write to the output
directory:
lstat("/output/kselftest/powerpc/pmu/ebb/.54.tmp", 0x7fffd1bf6bf8)
And also see that the -no-pie option is now correctly detected.
Fixes: 0695f8bca9 ("selftests/powerpc: Handle Makefile for unrecognized option")
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200327095319.2347641-1-mpe@ellerman.id.au
Some specific tests in powerpc can take longer than the default 45
seconds that added in commit 852c8cbf34 ("selftests/kselftest/runner.sh:
Add 45 second timeout per test") to run, the following test result was
collected across 2 Power8 nodes and 1 Power9 node in our pool:
powerpc/benchmarks/futex_bench - 52s
powerpc/dscr/dscr_sysfs_test - 116s
powerpc/signal/signal_fuzzer - 88s
powerpc/tm/tm_unavailable_test - 168s
powerpc/tm/tm-poison - 240s
Thus they will fail with TIMEOUT error. Disable the timeout setting
for these sub-tests to allow them finish properly.
https://bugs.launchpad.net/bugs/1864642
Fixes: 852c8cbf34 ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200318060004.10685-1-po-hsu.lin@canonical.com
The test case tm-signal-context-force-tm expects a segfault to happen
on returning from signal handler, and then does a setcontext() to run
the test again. However, the test doesn't always segfault, causing the
test to run a single time.
This patch fixes the test by putting it within a loop and jumping, via
setcontext, just prior to the loop in case it segfaults. This way we
get the desired behavior (run the test COUNT_MAX times) regardless if
it segfaults or not. This also reduces the use of setcontext for
control flow logic, keeping it only in the segfault handler.
Also, since 'count' is changed within the signal handler, it is
declared as volatile to prevent any compiler optimization getting
confused with asynchronous changes.
Signed-off-by: Gustavo Luiz Duarte <gustavold@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200211033831.11165-3-gustavold@linux.ibm.com
This test triggers a TM Bad Thing by raising a signal in transactional state
and forcing a pagefault to happen in kernelspace when the kernel signal
handling code first touches the user signal stack.
This is inspired by the test tm-signal-context-force-tm but uses userfaultfd to
make the test deterministic. While this test always triggers the bug in one
run, I had to execute tm-signal-context-force-tm several times (the test runs
5000 times each execution) to trigger the same bug.
tm-signal-context-force-tm is kept instead of replaced because, while this test
is more reliable and triggers the same bug, tm-signal-context-force-tm has a
better coverage, in the sense that by running the test several times it might
trigger the pagefault and/or be preempted at different places.
v3: skip test if userfaultfd is unavailable.
Signed-off-by: Gustavo Luiz Duarte <gustavold@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200211033831.11165-2-gustavold@linux.ibm.com
There's two different paths through the sigreturn code, depending on
whether the VDSO is mapped or not. We recently discovered a bug in the
unmapped case, because it's not commonly used these days.
So add a test that sends itself a signal, then moves the VDSO, takes
another signal and finally unmaps the VDSO before sending itself
another signal. That tests the standard signal path, the code that
handles the VDSO being moved, and also the signal path in the case
where the VDSO is unmapped.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200304110402.6038-1-mpe@ellerman.id.au
Some newer cards supported by aacraid can take up to 40s to recover
after an EEH event. This causes spurious failures in the basic EEH
self-test since the current maximim timeout is only 30s.
Fix the immediate issue by bumping the timeout to a default of 60s,
and allow the wait time to be specified via an environmental variable
(EEH_MAX_WAIT).
Reported-by: Steve Best <sbest@redhat.com>
Suggested-by: Douglas Miller <dougmill@us.ibm.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200122031125.25991-1-oohall@gmail.com
Userspace isn't allowed to access certain address ranges, make sure we
actually test that to at least some degree.
This would have caught the recent bug where the SLB fault handler was
incorrectly called on an out-of-range access when using the Radix MMU.
It also would have caught the bug we had in get_region_id() where we
were inserting SLB entries for bad addresses.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190520102051.12103-1-mpe@ellerman.id.au
So far we used to ignore exception if DAR points outside of user
specified range. But now we are ignoring it only if actual load/store
range does not overlap with user specified range. Include selftests
for the same:
# ./tools/testing/selftests/powerpc/ptrace/perf-hwbreak
...
TESTED: No overlap
TESTED: Partial overlap
TESTED: Partial overlap
TESTED: No overlap
TESTED: Full overlap
success: perf_hwbreak
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191017093204.7511-7-ravi.bangoria@linux.ibm.com
ptrace-hwbreak.c selftest is logically broken. On powerpc, when
watchpoint is created with ptrace, signals are generated before
executing the instruction and user has to manually singlestep the
instruction with watchpoint disabled, which selftest never does and
thus it keeps on getting the signal at the same instruction. If we fix
it, selftest fails because the logical connection between
tracer(parent) and tracee(child) is also broken. Rewrite the selftest
and add new tests for unaligned access.
With patch:
$ ./tools/testing/selftests/powerpc/ptrace/ptrace-hwbreak
test: ptrace-hwbreak
tags: git_version:powerpc-5.3-4-224-g218b868240c7-dirty
PTRACE_SET_DEBUGREG, WO, len: 1: Ok
PTRACE_SET_DEBUGREG, WO, len: 2: Ok
PTRACE_SET_DEBUGREG, WO, len: 4: Ok
PTRACE_SET_DEBUGREG, WO, len: 8: Ok
PTRACE_SET_DEBUGREG, RO, len: 1: Ok
PTRACE_SET_DEBUGREG, RO, len: 2: Ok
PTRACE_SET_DEBUGREG, RO, len: 4: Ok
PTRACE_SET_DEBUGREG, RO, len: 8: Ok
PTRACE_SET_DEBUGREG, RW, len: 1: Ok
PTRACE_SET_DEBUGREG, RW, len: 2: Ok
PTRACE_SET_DEBUGREG, RW, len: 4: Ok
PTRACE_SET_DEBUGREG, RW, len: 8: Ok
PPC_PTRACE_SETHWDEBUG, MODE_EXACT, WO, len: 1: Ok
PPC_PTRACE_SETHWDEBUG, MODE_EXACT, RO, len: 1: Ok
PPC_PTRACE_SETHWDEBUG, MODE_EXACT, RW, len: 1: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW ALIGNED, WO, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW ALIGNED, RO, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW ALIGNED, RW, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW UNALIGNED, WO, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW UNALIGNED, RO, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW UNALIGNED, RW, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW UNALIGNED, DAR OUTSIDE, RW, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, DAWR_MAX_LEN, RW, len: 512: Ok
success: ptrace-hwbreak
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191017093204.7511-6-ravi.bangoria@linux.ibm.com
On systems where TM (Transactional Memory) is disabled the
tm-signal-sigreturn-nt test causes a SIGILL:
test: tm_signal_sigreturn_nt
tags: git_version:7c202575ef63
!! child died by signal 4
failure: tm_signal_sigreturn_nt
We should skip the test if TM is not available.
Fixes: 34642d70ac ("selftests/powerpc: Add checks for transactional sigreturn")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191104233524.24348-1-mpe@ellerman.id.au
This test uses the PMU to count branch prediction hits/misses for a
known loop, and compare the result to the reported spectre v2
mitigation.
This gives us a way of sanity checking that the reported mitigation is
actually in effect.
Sample output for some cases, eg:
Power9:
sysfs reports: 'Vulnerable'
PM_BR_PRED_CCACHE: result 368 running/enabled 5792777124
PM_BR_MPRED_CCACHE: result 319 running/enabled 5792775546
PM_BR_PRED_PCACHE: result 2147483281 running/enabled 5792773128
PM_BR_MPRED_PCACHE: result 213604201 running/enabled 5792771640
Miss percent 9 %
OK - Measured branch prediction rates match reported spectre v2 mitigation.
sysfs reports: 'Mitigation: Indirect branch serialisation (kernel only)'
PM_BR_PRED_CCACHE: result 895 running/enabled 5780320920
PM_BR_MPRED_CCACHE: result 822 running/enabled 5780312414
PM_BR_PRED_PCACHE: result 2147482754 running/enabled 5780308836
PM_BR_MPRED_PCACHE: result 213639731 running/enabled 5780307912
Miss percent 9 %
OK - Measured branch prediction rates match reported spectre v2 mitigation.
sysfs reports: 'Mitigation: Indirect branch cache disabled'
PM_BR_PRED_CCACHE: result 2147483649 running/enabled 20540186160
PM_BR_MPRED_CCACHE: result 2147483649 running/enabled 20540180056
PM_BR_PRED_PCACHE: result 0 running/enabled 20540176090
PM_BR_MPRED_PCACHE: result 0 running/enabled 20540174182
Miss percent 100 %
OK - Measured branch prediction rates match reported spectre v2 mitigation.
Power8:
sysfs reports: 'Vulnerable'
PM_BR_PRED_CCACHE: result 2147483649 running/enabled 3505888142
PM_BR_MPRED_CCACHE: result 9 running/enabled 3505882788
Miss percent 0 %
OK - Measured branch prediction rates match reported spectre v2 mitigation.
sysfs reports: 'Mitigation: Indirect branch cache disabled'
PM_BR_PRED_CCACHE: result 2147483649 running/enabled 16931421988
PM_BR_MPRED_CCACHE: result 2147483649 running/enabled 16931416478
Miss percent 100 %
OK - Measured branch prediction rates match reported spectre v2 mitigation.
success: spectre_v2
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190520105520.22274-1-mpe@ellerman.id.au
Some of our TM (Transactional Memory) tests, list "r1" (the stack
pointer) as a clobbered register.
GCC >= 9 doesn't accept this, and the build breaks:
ptrace-tm-spd-tar.c: In function 'tm_spd_tar':
ptrace-tm-spd-tar.c:31:2: error: listing the stack pointer register 'r1' in a clobber list is deprecated [-Werror=deprecated]
31 | asm __volatile__(
| ^~~
ptrace-tm-spd-tar.c:31:2: note: the value of the stack pointer after an 'asm' statement must be the same as it was before the statement
We do have some fairly large inline asm blocks in these tests, and
some of them do change the value of r1. However they should all return
to C with the value in r1 restored, so I think it's legitimate to say
r1 is not clobbered.
As Segher points out, the r1 clobbers may have been added because of
the use of `or 1,1,1`, however that doesn't actually clobber r1.
Segher also points out that some of these tests do clobber LR, because
they call functions, and that is not listed in the clobbers, so add
that where appropriate.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191029095324.14669-1-mpe@ellerman.id.au
The defaults for the sigfuz test is to run for 4000 iterations, but
that can take quite a while and the test harness may kill the test.
Reduce the number of iterations to 600, which gives a runtime of
roughly 1 minute on a Power8 system.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191013234643.3430-1-mpe@ellerman.id.au
Newer versions of GCC (>= 9) demand that the size of the string to be
copied must be explicitly smaller than the size of the destination.
Thus, the NULL char has to be taken into account on strncpy.
This will avoid the following compiling error:
tlbie_test.c: In function 'main':
tlbie_test.c:639:4: error: 'strncpy' specified bound 100 equals destination size
strncpy(logdir, optarg, LOGDIR_NAME_SIZE);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191003211010.9711-1-desnesn@linux.ibm.com
